From: Stelian Pop Date: Wed, 26 Mar 2008 19:52:32 +0000 (+0100) Subject: Port AT91CAP9 to the new headers X-Git-Tag: v1.3.3-rc1~111^2~6 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=983c1db04c1dd0f92e02f06d29f0c65a3d9a2687;p=u-boot Port AT91CAP9 to the new headers Adapt the existing AT91CAP9 code to the new headers and APIs. Signed-off-by: Stelian Pop --- diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 52e62deaed..24861ba49d 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -23,7 +23,13 @@ */ #include -#include +#include +#include +#include +#include +#include +#include +#include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif @@ -40,126 +46,106 @@ DECLARE_GLOBAL_DATA_PTR; static void at91cap9_serial_hw_init(void) { #ifdef CONFIG_USART0 - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA22_TXD0 | AT91C_PA23_RXD0; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US0; + at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); #endif #ifdef CONFIG_USART1 - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_TXD1 | AT91C_PD1_RXD1; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US1; + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); #endif #ifdef CONFIG_USART2 - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD2_TXD2 | AT91C_PD3_RXD2; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US2; + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ - AT91C_BASE_PIOC->PIO_PDR = AT91C_PC31_DTXD | AT91C_PC30_DRXD; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS; + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); #endif - - } static void at91cap9_nor_hw_init(void) { - /* Ensure EBI supply is 3.3V */ - AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_SUP_3V3; + unsigned long csa; + /* Ensure EBI supply is 3.3V */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); /* Configure SMC CS0 for parallel flash */ - AT91C_BASE_SMC->SMC_SETUP0 = AT91C_FLASH_NWE_SETUP | - AT91C_FLASH_NCS_WR_SETUP | - AT91C_FLASH_NRD_SETUP | - AT91C_FLASH_NCS_RD_SETUP; - - AT91C_BASE_SMC->SMC_PULSE0 = AT91C_FLASH_NWE_PULSE | - AT91C_FLASH_NCS_WR_PULSE | - AT91C_FLASH_NRD_PULSE | - AT91C_FLASH_NCS_RD_PULSE; - - AT91C_BASE_SMC->SMC_CYCLE0 = AT91C_FLASH_NWE_CYCLE | - AT91C_FLASH_NRD_CYCLE; - - AT91C_BASE_SMC->SMC_CTRL0 = AT91C_SMC_READMODE | - AT91C_SMC_WRITEMODE | - AT91C_SMC_NWAITM_NWAIT_DISABLE | - AT91C_SMC_BAT_BYTE_WRITE | - AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | - (AT91C_SMC_TDF & (1 << 16)); + at91_sys_write(AT91_SMC_SETUP(0), + AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) | + AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); + at91_sys_write(AT91_SMC_PULSE(0), + AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) | + AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); + at91_sys_write(AT91_SMC_CYCLE(0), + AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); + at91_sys_write(AT91_SMC_MODE(0), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | + AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); } #ifdef CONFIG_CMD_NAND static void at91cap9_nand_hw_init(void) { + unsigned long csa; + /* Enable CS3 */ - AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM | AT91C_EBI_SUP_3V3; + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | + AT91_MATRIX_EBI_VDDIOMSEL_3_3V); /* Configure SMC CS3 for NAND/SmartMedia */ - AT91C_BASE_SMC->SMC_SETUP3 = AT91C_SM_NWE_SETUP | - AT91C_SM_NCS_WR_SETUP | - AT91C_SM_NRD_SETUP | - AT91C_SM_NCS_RD_SETUP; - - AT91C_BASE_SMC->SMC_PULSE3 = AT91C_SM_NWE_PULSE | - AT91C_SM_NCS_WR_PULSE | - AT91C_SM_NRD_PULSE | - AT91C_SM_NCS_RD_PULSE; - - AT91C_BASE_SMC->SMC_CYCLE3 = AT91C_SM_NWE_CYCLE | - AT91C_SM_NRD_CYCLE; - - AT91C_BASE_SMC->SMC_CTRL3 = AT91C_SMC_READMODE | - AT91C_SMC_WRITEMODE | - AT91C_SMC_NWAITM_NWAIT_DISABLE | - AT91C_SMC_DBW_WIDTH_EIGTH_BITS | - AT91C_SM_TDF; - - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD; + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) | + AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) | + AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(1)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); /* RDY/BSY is not connected */ /* Enable NandFlash */ - AT91C_BASE_PIOD->PIO_PER = AT91C_PIO_PD15; - AT91C_BASE_PIOD->PIO_OER = AT91C_PIO_PD15; + at91_set_gpio_output(AT91_PIN_PD15, 1); } #endif #ifdef CONFIG_HAS_DATAFLASH static void at91cap9_spi_hw_init(void) { - AT91C_BASE_PIOD->PIO_BSR = AT91C_PD0_SPI0_NPCS2D | - AT91C_PD1_SPI0_NPCS3D; - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_SPI0_NPCS2D | - AT91C_PD1_SPI0_NPCS3D; - - AT91C_BASE_PIOA->PIO_ASR = AT91C_PA28_SPI0_NPCS3A; - AT91C_BASE_PIOA->PIO_BSR = AT91C_PA4_SPI0_NPCS2A | - AT91C_PA1_SPI0_MOSI | - AT91C_PA0_SPI0_MISO | - AT91C_PA3_SPI0_NPCS1 | - AT91C_PA5_SPI0_NPCS0 | - AT91C_PA2_SPI0_SPCK; - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA28_SPI0_NPCS3A | - AT91C_PA4_SPI0_NPCS2A | - AT91C_PA1_SPI0_MOSI | - AT91C_PA0_SPI0_MISO | - AT91C_PA3_SPI0_NPCS1 | - AT91C_PA5_SPI0_NPCS0 | - AT91C_PA2_SPI0_SPCK; - - /* Enable Clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI0; + at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ + + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0); } #endif #ifdef CONFIG_MACB static void at91cap9_macb_hw_init(void) { - unsigned int gpio; - /* Enable clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_EMAC; + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC); /* * Disable pull-up on: @@ -169,54 +155,59 @@ static void at91cap9_macb_hw_init(void) * * PHY has internal pull-down */ - AT91C_BASE_PIOB->PIO_PPUDR = AT91C_PB22_E_RXDV | - AT91C_PB25_E_RX0 | - AT91C_PB26_E_RX1; + writel(pin_to_mask(AT91_PIN_PB22) | + pin_to_mask(AT91_PIN_PB25) | + pin_to_mask(AT91_PIN_PB26), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); /* Need to reset PHY -> 500ms reset */ - AT91C_BASE_RSTC->RSTC_RMR = (AT91C_RSTC_KEY & (0xA5 << 24)) | - (AT91C_RSTC_ERSTL & (0x0D << 8)) | - AT91C_RSTC_URSTEN; - AT91C_BASE_RSTC->RSTC_RCR = (AT91C_RSTC_KEY & (0xA5 << 24)) | - AT91C_RSTC_EXTRST; + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0D << 8) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); /* Wait for end hardware reset */ - while (!(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL)); + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); /* Re-enable pull-up */ - AT91C_BASE_PIOB->PIO_PPUER = AT91C_PB22_E_RXDV | - AT91C_PB25_E_RX0 | - AT91C_PB26_E_RX1; - -#ifdef CONFIG_RMII - gpio = AT91C_PB30_E_MDIO | - AT91C_PB29_E_MDC | - AT91C_PB21_E_TXCK | - AT91C_PB27_E_RXER | - AT91C_PB25_E_RX0 | - AT91C_PB22_E_RXDV | - AT91C_PB26_E_RX1 | - AT91C_PB28_E_TXEN | - AT91C_PB23_E_TX0 | - AT91C_PB24_E_TX1; - AT91C_BASE_PIOB->PIO_ASR = gpio; - AT91C_BASE_PIOB->PIO_BSR = 0; - AT91C_BASE_PIOB->PIO_PDR = gpio; -#else -#error AT91CAP9A-DK works only in RMII mode + writel(pin_to_mask(AT91_PIN_PB22) | + pin_to_mask(AT91_PIN_PB25) | + pin_to_mask(AT91_PIN_PB26), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ #endif - /* Unlock EMAC, 3 0 2 1 sequence */ #define MP_MAC_KEY0 0x5969cb2a #define MP_MAC_KEY1 0xb4a1872e #define MP_MAC_KEY2 0x05683fbc #define MP_MAC_KEY3 0x3634fba4 #define UNLOCK_MAC 0x00000008 - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_MAC_KEY3; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_MAC_KEY0; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_MAC_KEY2; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_MAC_KEY1; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_MAC; + writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c); + writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30); + writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38); + writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34); + writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40); } #endif @@ -229,11 +220,11 @@ static void at91cap9_uhp_hw_init(void) #define MP_OHCI_KEY2 0x4823efbc #define MP_OHCI_KEY3 0x8651aae4 #define UNLOCK_OHCI 0x00000010 - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_OHCI_KEY3; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_OHCI_KEY2; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_OHCI_KEY0; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_OHCI_KEY1; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_OHCI; + writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c); + writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38); + writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30); + writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34); + writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40); } #endif diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c index 8588a91a13..04de139204 100644 --- a/board/atmel/at91cap9adk/led.c +++ b/board/atmel/at91cap9adk/led.c @@ -23,58 +23,55 @@ */ #include -#include +#include +#include +#include +#include -#define RED_LED AT91C_PIO_PC29 /* this is the power led */ -#define GREEN_LED AT91C_PIO_PA10 /* this is the user1 led */ -#define YELLOW_LED AT91C_PIO_PA11 /* this is the user1 led */ +#define RED_LED AT91_PIN_PC29 /* this is the power led */ +#define GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ +#define YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ void red_LED_on(void) { - AT91C_BASE_PIOC->PIO_SODR = RED_LED; + at91_set_gpio_value(RED_LED, 1); } void red_LED_off(void) { - AT91C_BASE_PIOC->PIO_CODR = RED_LED; + at91_set_gpio_value(RED_LED, 0); } void green_LED_on(void) { - AT91C_BASE_PIOA->PIO_CODR = GREEN_LED; + at91_set_gpio_value(GREEN_LED, 0); } void green_LED_off(void) { - AT91C_BASE_PIOA->PIO_SODR = GREEN_LED; + at91_set_gpio_value(GREEN_LED, 1); } void yellow_LED_on(void) { - AT91C_BASE_PIOA->PIO_CODR = YELLOW_LED; + at91_set_gpio_value(YELLOW_LED, 0); } void yellow_LED_off(void) { - AT91C_BASE_PIOA->PIO_SODR = YELLOW_LED; + at91_set_gpio_value(YELLOW_LED, 1); } void coloured_LED_init(void) { /* Enable clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD; + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); - /* Disable peripherals on LEDs */ - AT91C_BASE_PIOA->PIO_PER = GREEN_LED | YELLOW_LED; - /* Enable pins as outputs */ - AT91C_BASE_PIOA->PIO_OER = GREEN_LED | YELLOW_LED; - /* Turn all LEDs OFF */ - AT91C_BASE_PIOA->PIO_SODR = GREEN_LED | YELLOW_LED; + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); - /* Disable peripherals on LEDs */ - AT91C_BASE_PIOC->PIO_PER = RED_LED; - /* Enable pins as outputs */ - AT91C_BASE_PIOC->PIO_OER = RED_LED; - /* Turn all LEDs OFF */ - AT91C_BASE_PIOC->PIO_CODR = RED_LED; + at91_set_gpio_output(RED_LED, 0); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); } diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c index 2f02126278..1277973a98 100644 --- a/board/atmel/at91cap9adk/nand.c +++ b/board/atmel/at91cap9adk/nand.c @@ -25,7 +25,9 @@ */ #include -#include +#include +#include +#include #ifdef CONFIG_CMD_NAND @@ -51,10 +53,10 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd) IO_ADDR_W |= MASK_ALE; break; case NAND_CTL_CLRNCE: - AT91C_BASE_PIOD->PIO_SODR = AT91C_PIO_PD15; + at91_set_gpio_value(AT91_PIN_PD15, 1); break; case NAND_CTL_SETNCE: - AT91C_BASE_PIOD->PIO_CODR = AT91C_PIO_PD15; + at91_set_gpio_value(AT91_PIN_PD15, 0); break; } this->IO_ADDR_W = (void *) IO_ADDR_W; diff --git a/cpu/arm926ejs/at91sam9/ether.c b/cpu/arm926ejs/at91sam9/ether.c index 8de1bb7c33..e4f56012aa 100644 --- a/cpu/arm926ejs/at91sam9/ether.c +++ b/cpu/arm926ejs/at91sam9/ether.c @@ -30,6 +30,6 @@ extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) void at91sam9_eth_initialize(bd_t *bi) { - macb_eth_initialize(0, (void *)AT91C_BASE_MACB, 0x00); + macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); } #endif diff --git a/cpu/arm926ejs/at91sam9/spi.c b/cpu/arm926ejs/at91sam9/spi.c index 0953820bdf..c819608295 100644 --- a/cpu/arm926ejs/at91sam9/spi.c +++ b/cpu/arm926ejs/at91sam9/spi.c @@ -19,94 +19,135 @@ * */ -#include #include -#include +#include +#include +#include +#include +#include #ifdef CONFIG_HAS_DATAFLASH #include -/* Max Value = 10MHz to be compliant to the Continuous Array Read function */ -#define AT91C_SPI_CLK 10000000 - -/* AC Characteristics: DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -#define DATAFLASH_TCSS (0xFA << 16) -#define DATAFLASH_TCHS (0x8 << 24) - -#define AT91C_TIMEOUT_WRDY 200000 -#define AT91C_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ -#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ +#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ +#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 0: NPCS0%1101 */ +#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ void AT91F_SpiInit(void) { /* Reset the SPI */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SWRST; + writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR); /* Configure SPI in Master Mode with No CS selected !!! */ - AT91C_BASE_SPI0->SPI_MR = - AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; + writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS, + AT91_BASE_SPI + AT91_SPI_MR); /* Configure CS0 */ - AT91C_BASE_SPI0->SPI_CSR[0] = - AT91C_SPI_CPOL | - (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(0)); + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1 + /* Configure CS1 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(1)); +#endif + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3 + /* Configure CS3 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(3)); +#endif + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); + + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS)); + + /* + * Add tempo to get SPI in a safe state. + * Should not be needed for new silicon (Rev B) + */ + udelay(500000); + readl(AT91_BASE_SPI + AT91_SPI_SR); + readl(AT91_BASE_SPI + AT91_SPI_RDR); + } void AT91F_SpiEnable(int cs) { + unsigned long mode; switch (cs) { case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS0_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); break; case 3: - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); break; } /* SPI_Enable */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SPIEN; + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); } +unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); + unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) { unsigned int timeout; + pDesc->state = BUSY; - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + /* Initialize the Transmit and Receive Pointer */ - AT91C_BASE_SPI0->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt; - AT91C_BASE_SPI0->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt; + writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR); + writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR); /* Intialize the Transmit and Receive Counters */ - AT91C_BASE_SPI0->SPI_RCR = pDesc->rx_cmd_size; - AT91C_BASE_SPI0->SPI_TCR = pDesc->tx_cmd_size; + writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR); + writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR); if (pDesc->tx_data_size != 0) { /* Initialize the Next Transmit and Next Receive Pointer */ - AT91C_BASE_SPI0->SPI_RNPR = (unsigned int)pDesc->rx_data_pt; - AT91C_BASE_SPI0->SPI_TNPR = (unsigned int)pDesc->tx_data_pt; + writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR); + writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR); /* Intialize the Next Transmit and Next Receive Counters */ - AT91C_BASE_SPI0->SPI_RNCR = pDesc->rx_data_size; - AT91C_BASE_SPI0->SPI_TNCR = pDesc->tx_data_size; + writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR); + writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR); } /* arm simple, non interrupt dependent timer */ reset_timer_masked(); timeout = 0; - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; - while (!(AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_RXBUFF) && + writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); pDesc->state = IDLE; if (timeout >= CFG_SPI_WRITE_TOUT) { diff --git a/cpu/arm926ejs/at91sam9/timer.c b/cpu/arm926ejs/at91sam9/timer.c index 79c135fad4..4e79466286 100644 --- a/cpu/arm926ejs/at91sam9/timer.c +++ b/cpu/arm926ejs/at91sam9/timer.c @@ -24,22 +24,24 @@ #include #include +#include +#include +#include +#include /* * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by * setting the 20 bit counter period to its maximum (0xfffff). */ #define TIMER_LOAD_VAL 0xfffff -#define READ_RESET_TIMER (AT91C_BASE_PITC->PITC_PIVR) -#define READ_TIMER (AT91C_BASE_PITC->PITC_PIIR) +#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR) +#define READ_TIMER at91_sys_read(AT91_PIT_PIIR) #define TIMER_FREQ (AT91C_MASTER_CLOCK << 4) #define TICKS_TO_USEC(ticks) ((ticks) / 6) ulong get_timer_masked(void); ulong resettime; -AT91PS_PITC p_pitc; - /* nothing really to do with interrupts, just starts up a counter. */ int timer_init(void) { @@ -47,13 +49,10 @@ int timer_init(void) * Enable PITC Clock * The clock is already enabled for system controller in boot */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); /* Enable PITC */ - AT91C_BASE_PITC->PITC_PIMR = AT91C_PITC_PITEN; - - /* Load PITC_PIMR with the right timer value */ - AT91C_BASE_PITC->PITC_PIMR |= TIMER_LOAD_VAL; + at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN); reset_timer_masked(); @@ -67,6 +66,7 @@ int timer_init(void) static inline ulong get_timer_raw(void) { ulong now = READ_TIMER; + if (now >= resettime) return now - resettime; else @@ -129,6 +129,7 @@ unsigned long long get_ticks(void) ulong get_tbclk(void) { ulong tbclk; + tbclk = CFG_HZ; return tbclk; } @@ -139,9 +140,9 @@ ulong get_tbclk(void) void reset_cpu(ulong ignored) { /* this is the way Linux does it */ - AT91C_BASE_RSTC->RSTC_RCR = (0xA5 << 24) | - AT91C_RSTC_PROCRST | - AT91C_RSTC_PERRST; + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_PERRST); while (1); /* Never reached */ diff --git a/cpu/arm926ejs/at91sam9/usb.c b/cpu/arm926ejs/at91sam9/usb.c index 09292a6bed..d678897dc7 100644 --- a/cpu/arm926ejs/at91sam9/usb.c +++ b/cpu/arm926ejs/at91sam9/usb.c @@ -26,12 +26,14 @@ #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) #include +#include +#include int usb_cpu_init(void) { /* Enable USB host clock. */ - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UHP; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_UHP; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); return 0; } @@ -39,8 +41,8 @@ int usb_cpu_init(void) int usb_cpu_stop(void) { /* Disable USB host clock. */ - AT91C_BASE_PMC->PMC_PCDR = 1 << AT91C_ID_UHP; - AT91C_BASE_PMC->PMC_SCDR = AT91C_PMC_UHP; + at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); return 0; } diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index f0dfd71aef..dab21d0c0a 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stelian Pop leadtechdesign.com> * Lead Tech Design * @@ -28,8 +28,8 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ -#define AT91C_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ +#define AT91_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ #define CFG_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -46,19 +46,9 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SKIP_RELOCATE_UBOOT -#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000) -#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ - -#define CONFIG_BAUDRATE 115200 - /* * Hardware drivers */ - #define CONFIG_ATMEL_USART 1 #undef CONFIG_USART0 #undef CONFIG_USART1 @@ -104,7 +94,9 @@ #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) #define CFG_MAX_DATAFLASH_BANKS 1 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CONFIG_NEW_PARTITION 1 +#define AT91_SPI_CLK 20000000 +#define DATAFLASH_TCSS (0xFA << 16) +#define DATAFLASH_TCHS (0x8 << 24) /* NOR flash */ #define CFG_FLASH_CFI 1 @@ -114,39 +106,11 @@ #define CFG_MAX_FLASH_SECT 256 #define CFG_MAX_FLASH_BANKS 1 -#define AT91C_FLASH_NWE_SETUP (4 << 0) -#define AT91C_FLASH_NCS_WR_SETUP (2 << 8) -#define AT91C_FLASH_NRD_SETUP (4 << 16) -#define AT91C_FLASH_NCS_RD_SETUP (2 << 24) - -#define AT91C_FLASH_NWE_PULSE (8 << 0) -#define AT91C_FLASH_NCS_WR_PULSE (10 << 8) -#define AT91C_FLASH_NRD_PULSE (8 << 16) -#define AT91C_FLASH_NCS_RD_PULSE (10 << 24) - -#define AT91C_FLASH_NWE_CYCLE (16 << 0) -#define AT91C_FLASH_NRD_CYCLE (16 << 16) - /* NAND flash */ #define NAND_MAX_CHIPS 1 #define CFG_MAX_NAND_DEVICE 1 #define CFG_NAND_BASE 0x40000000 -#define AT91C_SM_NWE_SETUP (2 << 0) -#define AT91C_SM_NCS_WR_SETUP (1 << 8) -#define AT91C_SM_NRD_SETUP (2 << 16) -#define AT91C_SM_NCS_RD_SETUP (1 << 24) - -#define AT91C_SM_NWE_PULSE (4 << 0) -#define AT91C_SM_NCS_WR_PULSE (6 << 8) -#define AT91C_SM_NRD_PULSE (4 << 16) -#define AT91C_SM_NCS_RD_PULSE (6 << 24) - -#define AT91C_SM_NWE_CYCLE (8 << 0) -#define AT91C_SM_NRD_CYCLE (8 << 16) - -#define AT91C_SM_TDF (1 << 16) - /* Ethernet */ #define CONFIG_MACB 1 #define CONFIG_RMII 1 @@ -159,15 +123,14 @@ #define LITTLEENDIAN 1 #define CONFIG_DOS_PARTITION 1 #define CFG_USB_OHCI_CPU_INIT 1 -#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91C_BASE_UHP */ +#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */ #define CFG_USB_OHCI_SLOT_NAME "at91cap9" #define CFG_USB_OHCI_MAX_ROOT_PORTS 2 - #define CFG_LOAD_ADDR 0x72000000 /* load address */ #define CFG_MEMTEST_START PHYS_SDRAM -#define CFG_MEMTEST_END 0x73000000 +#define CFG_MEMTEST_END 0x73e00000 #define CFG_USE_DATAFLASH 1 #undef CFG_USE_NORFLASH @@ -194,6 +157,7 @@ #endif +#define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CFG_PROMPT "U-Boot> " @@ -203,6 +167,13 @@ #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + #define CONFIG_STACKSIZE (32*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ