From: Nishanth Menon Date: Mon, 9 Mar 2015 22:12:04 +0000 (-0500) Subject: ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs X-Git-Tag: v2015.04-rc4~24 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=987ec5851c5c303417fb04a6a0fed6e4603e1a24;p=u-boot ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs This is in preperation of using generic cross OMAP code. Signed-off-by: Nishanth Menon Tested-by: Matt Porter Reviewed-by: Tom Rini --- diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h new file mode 100644 index 0000000000..194b93bf56 --- /dev/null +++ b/arch/arm/include/asm/arch-omap3/omap.h @@ -0,0 +1,248 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, + * Richard Woodruff + * Syed Mohammed Khasim + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _OMAP3_H_ +#define _OMAP3_H_ + +/* Stuff on L3 Interconnect */ +#define SMX_APE_BASE 0x68000000 + +/* GPMC */ +#define OMAP34XX_GPMC_BASE 0x6E000000 + +/* SMS */ +#define OMAP34XX_SMS_BASE 0x6C000000 + +/* SDRC */ +#define OMAP34XX_SDRC_BASE 0x6D000000 + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP34XX_CORE_L4_IO_BASE 0x48000000 +#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 +#define OMAP34XX_ID_L4_IO_BASE 0x4830A200 +#define OMAP34XX_L4_PER 0x49000000 +#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE + +/* DMA4/SDMA */ +#define OMAP34XX_DMA4_BASE 0x48056000 + +/* CONTROL */ +#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) + +#ifndef __ASSEMBLY__ +/* Signal Integrity Parameter Control Registers */ +struct control_prog_io { + unsigned char res[0x408]; + unsigned int io2; /* 0x408 */ + unsigned char res2[0x38]; + unsigned int io0; /* 0x444 */ + unsigned int io1; /* 0x448 */ +}; +#endif /* __ASSEMBLY__ */ + +/* Bit definition for CONTROL_PROG_IO1 */ +#define PRG_I2C2_PULLUPRESX 0x00000001 + +/* UART */ +#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) +#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) +#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000) +#define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000) + +/* General Purpose Timers */ +#define OMAP34XX_GPT1 0x48318000 +#define OMAP34XX_GPT2 0x49032000 +#define OMAP34XX_GPT3 0x49034000 +#define OMAP34XX_GPT4 0x49036000 +#define OMAP34XX_GPT5 0x49038000 +#define OMAP34XX_GPT6 0x4903A000 +#define OMAP34XX_GPT7 0x4903C000 +#define OMAP34XX_GPT8 0x4903E000 +#define OMAP34XX_GPT9 0x49040000 +#define OMAP34XX_GPT10 0x48086000 +#define OMAP34XX_GPT11 0x48088000 +#define OMAP34XX_GPT12 0x48304000 + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x4830C000 +#define WD2_BASE 0x48314000 +#define WD3_BASE 0x49030000 + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE 0x48320000 + +#ifndef __ASSEMBLY__ + +struct s32ktimer { + unsigned char res[0x10]; + unsigned int s32k_cr; /* 0x10 */ +}; + +#endif /* __ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ +struct gpio { + unsigned char res1[0x34]; + unsigned int oe; /* 0x34 */ + unsigned int datain; /* 0x38 */ + unsigned char res2[0x54]; + unsigned int cleardataout; /* 0x90 */ + unsigned int setdataout; /* 0x94 */ +}; +#endif /* __ASSEMBLY__ */ + +#define GPIO0 (0x1 << 0) +#define GPIO1 (0x1 << 1) +#define GPIO2 (0x1 << 2) +#define GPIO3 (0x1 << 3) +#define GPIO4 (0x1 << 4) +#define GPIO5 (0x1 << 5) +#define GPIO6 (0x1 << 6) +#define GPIO7 (0x1 << 7) +#define GPIO8 (0x1 << 8) +#define GPIO9 (0x1 << 9) +#define GPIO10 (0x1 << 10) +#define GPIO11 (0x1 << 11) +#define GPIO12 (0x1 << 12) +#define GPIO13 (0x1 << 13) +#define GPIO14 (0x1 << 14) +#define GPIO15 (0x1 << 15) +#define GPIO16 (0x1 << 16) +#define GPIO17 (0x1 << 17) +#define GPIO18 (0x1 << 18) +#define GPIO19 (0x1 << 19) +#define GPIO20 (0x1 << 20) +#define GPIO21 (0x1 << 21) +#define GPIO22 (0x1 << 22) +#define GPIO23 (0x1 << 23) +#define GPIO24 (0x1 << 24) +#define GPIO25 (0x1 << 25) +#define GPIO26 (0x1 << 26) +#define GPIO27 (0x1 << 27) +#define GPIO28 (0x1 << 28) +#define GPIO29 (0x1 << 29) +#define GPIO30 (0x1 << 30) +#define GPIO31 (0x1 << 31) + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \ + SRAM_OFFSET2) +#define SRAM_CLK_CODE (SRAM_VECT_CODE + 64) + +#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ +#define NON_SECURE_SRAM_END 0x40210000 + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +/* scratch area - accessible on both EMU and GP */ +#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START + +#define DEBUG_LED1 149 /* gpio */ +#define DEBUG_LED2 150 /* gpio */ + +#define XDR_POP 5 /* package on package part */ +#define SDR_DISCRETE 4 /* 128M memory SDR module */ +#define DDR_STACKED 3 /* stacked part on 2422 */ +#define DDR_COMBO 2 /* combo part on cpu daughter card */ +#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_3430 0x3430 + +/* + * 343x real hardware: + * ES1 = rev 0 + * + * ES2 onwards, the value maps to contents of IDCODE register [31:28]. + * + * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing. + */ +#define CPU_3XX_ES10 0 +#define CPU_3XX_ES20 1 +#define CPU_3XX_ES21 2 +#define CPU_3XX_ES30 3 +#define CPU_3XX_ES31 4 +#define CPU_3XX_ES312 7 +#define CPU_3XX_MAX_REV 8 + +/* + * 37xx real hardware: + * ES1.0 onwards, the value maps to contents of IDCODE register [31:28]. + */ + +#define CPU_37XX_ES10 0 +#define CPU_37XX_ES11 1 +#define CPU_37XX_ES12 2 +#define CPU_37XX_MAX_REV 3 + +#define CPU_3XX_ID_SHIFT 28 + +#define WIDTH_8BIT 0x0000 +#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ + +/* + * Hawkeye values + */ +#define HAWKEYE_OMAP34XX 0xb7ae +#define HAWKEYE_AM35XX 0xb868 +#define HAWKEYE_OMAP36XX 0xb891 + +#define HAWKEYE_SHIFT 12 + +/* + * Define CPU families + */ +#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */ +#define CPU_AM35XX 0x3500 /* AM35xx devices */ +#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */ + +/* + * Control status register values corresponding to cpu variants + */ +#define OMAP3503 0x5c00 +#define OMAP3515 0x1c00 +#define OMAP3525 0x4c00 +#define OMAP3530 0x0c00 + +#define AM3505 0x5c00 +#define AM3517 0x1c00 + +#define OMAP3730 0x0c00 + +/* + * ROM code API related flags + */ +#define OMAP3_GP_ROMCODE_API_L2_INVAL 1 +#define OMAP3_GP_ROMCODE_API_WRITE_ACR 3 + +/* + * EMU device PPA HAL related flags + */ +#define OMAP3_EMU_HAL_API_L2_INVAL 40 +#define OMAP3_EMU_HAL_API_WRITE_ACR 42 + +#define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 + +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 30 +#define OMAP_ABB_CLOCK_CYCLES 8 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) + +#endif diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h deleted file mode 100644 index 194b93bf56..0000000000 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * (C) Copyright 2006-2008 - * Texas Instruments, - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _OMAP3_H_ -#define _OMAP3_H_ - -/* Stuff on L3 Interconnect */ -#define SMX_APE_BASE 0x68000000 - -/* GPMC */ -#define OMAP34XX_GPMC_BASE 0x6E000000 - -/* SMS */ -#define OMAP34XX_SMS_BASE 0x6C000000 - -/* SDRC */ -#define OMAP34XX_SDRC_BASE 0x6D000000 - -/* - * L4 Peripherals - L4 Wakeup and L4 Core now - */ -#define OMAP34XX_CORE_L4_IO_BASE 0x48000000 -#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 -#define OMAP34XX_ID_L4_IO_BASE 0x4830A200 -#define OMAP34XX_L4_PER 0x49000000 -#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE - -/* DMA4/SDMA */ -#define OMAP34XX_DMA4_BASE 0x48056000 - -/* CONTROL */ -#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) - -#ifndef __ASSEMBLY__ -/* Signal Integrity Parameter Control Registers */ -struct control_prog_io { - unsigned char res[0x408]; - unsigned int io2; /* 0x408 */ - unsigned char res2[0x38]; - unsigned int io0; /* 0x444 */ - unsigned int io1; /* 0x448 */ -}; -#endif /* __ASSEMBLY__ */ - -/* Bit definition for CONTROL_PROG_IO1 */ -#define PRG_I2C2_PULLUPRESX 0x00000001 - -/* UART */ -#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) -#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) -#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000) -#define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000) - -/* General Purpose Timers */ -#define OMAP34XX_GPT1 0x48318000 -#define OMAP34XX_GPT2 0x49032000 -#define OMAP34XX_GPT3 0x49034000 -#define OMAP34XX_GPT4 0x49036000 -#define OMAP34XX_GPT5 0x49038000 -#define OMAP34XX_GPT6 0x4903A000 -#define OMAP34XX_GPT7 0x4903C000 -#define OMAP34XX_GPT8 0x4903E000 -#define OMAP34XX_GPT9 0x49040000 -#define OMAP34XX_GPT10 0x48086000 -#define OMAP34XX_GPT11 0x48088000 -#define OMAP34XX_GPT12 0x48304000 - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x4830C000 -#define WD2_BASE 0x48314000 -#define WD3_BASE 0x49030000 - -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE 0x48320000 - -#ifndef __ASSEMBLY__ - -struct s32ktimer { - unsigned char res[0x10]; - unsigned int s32k_cr; /* 0x10 */ -}; - -#endif /* __ASSEMBLY__ */ - -#ifndef __ASSEMBLY__ -struct gpio { - unsigned char res1[0x34]; - unsigned int oe; /* 0x34 */ - unsigned int datain; /* 0x38 */ - unsigned char res2[0x54]; - unsigned int cleardataout; /* 0x90 */ - unsigned int setdataout; /* 0x94 */ -}; -#endif /* __ASSEMBLY__ */ - -#define GPIO0 (0x1 << 0) -#define GPIO1 (0x1 << 1) -#define GPIO2 (0x1 << 2) -#define GPIO3 (0x1 << 3) -#define GPIO4 (0x1 << 4) -#define GPIO5 (0x1 << 5) -#define GPIO6 (0x1 << 6) -#define GPIO7 (0x1 << 7) -#define GPIO8 (0x1 << 8) -#define GPIO9 (0x1 << 9) -#define GPIO10 (0x1 << 10) -#define GPIO11 (0x1 << 11) -#define GPIO12 (0x1 << 12) -#define GPIO13 (0x1 << 13) -#define GPIO14 (0x1 << 14) -#define GPIO15 (0x1 << 15) -#define GPIO16 (0x1 << 16) -#define GPIO17 (0x1 << 17) -#define GPIO18 (0x1 << 18) -#define GPIO19 (0x1 << 19) -#define GPIO20 (0x1 << 20) -#define GPIO21 (0x1 << 21) -#define GPIO22 (0x1 << 22) -#define GPIO23 (0x1 << 23) -#define GPIO24 (0x1 << 24) -#define GPIO25 (0x1 << 25) -#define GPIO26 (0x1 << 26) -#define GPIO27 (0x1 << 27) -#define GPIO28 (0x1 << 28) -#define GPIO29 (0x1 << 29) -#define GPIO30 (0x1 << 30) -#define GPIO31 (0x1 << 31) - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \ - SRAM_OFFSET2) -#define SRAM_CLK_CODE (SRAM_VECT_CODE + 64) - -#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ -#define NON_SECURE_SRAM_END 0x40210000 - -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -/* scratch area - accessible on both EMU and GP */ -#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START - -#define DEBUG_LED1 149 /* gpio */ -#define DEBUG_LED2 150 /* gpio */ - -#define XDR_POP 5 /* package on package part */ -#define SDR_DISCRETE 4 /* 128M memory SDR module */ -#define DDR_STACKED 3 /* stacked part on 2422 */ -#define DDR_COMBO 2 /* combo part on cpu daughter card */ -#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ - -#define DDR_100 100 /* type found on most mem d-boards */ -#define DDR_111 111 /* some combo parts */ -#define DDR_133 133 /* most combo, some mem d-boards */ -#define DDR_165 165 /* future parts */ - -#define CPU_3430 0x3430 - -/* - * 343x real hardware: - * ES1 = rev 0 - * - * ES2 onwards, the value maps to contents of IDCODE register [31:28]. - * - * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing. - */ -#define CPU_3XX_ES10 0 -#define CPU_3XX_ES20 1 -#define CPU_3XX_ES21 2 -#define CPU_3XX_ES30 3 -#define CPU_3XX_ES31 4 -#define CPU_3XX_ES312 7 -#define CPU_3XX_MAX_REV 8 - -/* - * 37xx real hardware: - * ES1.0 onwards, the value maps to contents of IDCODE register [31:28]. - */ - -#define CPU_37XX_ES10 0 -#define CPU_37XX_ES11 1 -#define CPU_37XX_ES12 2 -#define CPU_37XX_MAX_REV 3 - -#define CPU_3XX_ID_SHIFT 28 - -#define WIDTH_8BIT 0x0000 -#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ - -/* - * Hawkeye values - */ -#define HAWKEYE_OMAP34XX 0xb7ae -#define HAWKEYE_AM35XX 0xb868 -#define HAWKEYE_OMAP36XX 0xb891 - -#define HAWKEYE_SHIFT 12 - -/* - * Define CPU families - */ -#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */ -#define CPU_AM35XX 0x3500 /* AM35xx devices */ -#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */ - -/* - * Control status register values corresponding to cpu variants - */ -#define OMAP3503 0x5c00 -#define OMAP3515 0x1c00 -#define OMAP3525 0x4c00 -#define OMAP3530 0x0c00 - -#define AM3505 0x5c00 -#define AM3517 0x1c00 - -#define OMAP3730 0x0c00 - -/* - * ROM code API related flags - */ -#define OMAP3_GP_ROMCODE_API_L2_INVAL 1 -#define OMAP3_GP_ROMCODE_API_WRITE_ACR 3 - -/* - * EMU device PPA HAL related flags - */ -#define OMAP3_EMU_HAL_API_L2_INVAL 40 -#define OMAP3_EMU_HAL_API_WRITE_ACR 42 - -#define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 - -/* ABB settings */ -#define OMAP_ABB_SETTLING_TIME 30 -#define OMAP_ABB_CLOCK_CYCLES 8 - -/* ABB tranxdone mask */ -#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) - -#endif diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 290a6a3e06..87c850e05d 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -23,7 +23,7 @@ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 3de5079962..c4e19e79b9 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -23,7 +23,7 @@ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 9feca1b47b..e2d5bbb095 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -30,7 +30,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 918032bd75..ee1b7a0cb5 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -30,7 +30,7 @@ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/dig297.h b/include/configs/dig297.h index c8739ed294..8791199fc6 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -36,7 +36,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 26eb220354..2cf66c40d6 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -26,7 +26,7 @@ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ #include /* get chip and board defs */ -#include +#include #define CONFIG_OF_LIBFDT #define CONFIG_FIT diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 46fc91e5e1..442e16ae68 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -42,7 +42,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include #include #include diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 8bdc08f586..4e587e10ff 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -18,7 +18,7 @@ #define __OMAP3EVM_CONFIG_H #include -#include +#include /* ---------------------------------------------------------------------------- * Supported U-boot commands diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 1185f42550..a7acc1becb 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -13,7 +13,7 @@ #define __OMAP3_EVM_QUICK_MMC_H #include -#include +#include /* ---------------------------------------------------------------------------- * Supported U-boot commands diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h index 4427e88b7e..c6cad93889 100644 --- a/include/configs/omap3_evm_quick_nand.h +++ b/include/configs/omap3_evm_quick_nand.h @@ -13,7 +13,7 @@ #define __OMAP3_EVM_QUICK_NAND_H #include -#include +#include /* ---------------------------------------------------------------------------- * Supported U-boot commands diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index aeb385f5ff..fcef467358 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -24,7 +24,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index bf1d34dedb..20ec3ad154 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -27,7 +27,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 45feeb5773..b92d67abcc 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -21,7 +21,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index ac307eb456..bf5c7a8faf 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -27,7 +27,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include /* * NOTE: these #defines presume standard SDP jumper settings. diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index c5d742c2bd..611cd5e1a3 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -22,7 +22,7 @@ #define CONFIG_NAND #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #include /* get chip and board defs */ -#include +#include #include /* Remove SPL boot option - we do not support that on LDP yet */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 38288f69aa..dea4044d9f 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -25,7 +25,7 @@ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index dd69d4ebab..f3e0088d5a 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -27,7 +27,7 @@ #define CONFIG_SDRC /* Has an SDRC controller */ #include /* get chip and board defs */ -#include +#include /* * Display CPU and Board information diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 840e108e05..4b4f104105 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -16,7 +16,7 @@ #include -#include +#include #ifndef CONFIG_SPL_BUILD # define CONFIG_OMAP_SERIAL diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 10ac4a46bc..b105ffd9f1 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -32,7 +32,7 @@ #define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ -#include +#include #define CONFIG_SYS_GENERIC_BOARD