From: Mike Looijmans Date: Wed, 7 Jun 2017 05:42:37 +0000 (+0200) Subject: arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfig X-Git-Tag: v2017.07-rc3~54^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=988390b8e14f16b5cbc8db057d9dbad45994d3b1;p=u-boot arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfig Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well. Signed-off-by: Mike Looijmans Signed-off-by: Michal Simek --- diff --git a/README b/README index 27a075abbb..2abba91b64 100644 --- a/README +++ b/README @@ -2534,12 +2534,6 @@ The following options need to be configured: Define this option to include a destructive SPI flash test ('sf test'). - CONFIG_SF_DUAL_FLASH Dual flash memories - - Define this option to use dual flash support where two flash - memories can be connected with a given cs line. - Currently Xilinx Zynq qspi supports these type of connections. - - SystemACE Support: CONFIG_SYSTEMACE diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index 10762f84e1..535ce6d500 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_SYS_VENDOR="topic" -CONFIG_SYS_CONFIG_NAME="topic_miamiplus" +CONFIG_SYS_CONFIG_NAME="topic_miami" CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt" @@ -28,6 +28,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 5ca0a712d8..5700859ff2 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -42,6 +42,13 @@ config SPI_FLASH_BAR Bank/Extended address registers are used to access the flash which has size > 16MiB in 3-byte addressing. +config SF_DUAL_FLASH + bool "SPI DUAL flash memory support" + depends on SPI_FLASH + help + Enable this option to support two flash memories connected to a single + controller. Currently Xilinx Zynq qspi supports this. + if SPI_FLASH config SPI_FLASH_ATMEL diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index a28922585c..ee46d3ac7e 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -56,7 +56,6 @@ #undef CONFIG_SF_DEFAULT_SPEED #define CONFIG_SF_DEFAULT_SPEED 108000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#undef CONFIG_SF_DUAL_FLASH #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #undef CONFIG_SPI_FLASH_WINBOND #undef CONFIG_SPI_FLASH_ISSI diff --git a/include/configs/topic_miamiplus.h b/include/configs/topic_miamiplus.h deleted file mode 100644 index 46ca6bda04..0000000000 --- a/include/configs/topic_miamiplus.h +++ /dev/null @@ -1,2 +0,0 @@ -#include "topic_miami.h" -#define CONFIG_SF_DUAL_FLASH diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index ac7adb20f7..feb430f745 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2284,7 +2284,6 @@ CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED -CONFIG_SF_DUAL_FLASH CONFIG_SGI_IP28 CONFIG_SH4_PCI CONFIG_SH73A0