From: Andrew Murray Date: Sun, 29 Sep 2013 17:02:22 +0000 (+0100) Subject: usb: Prevent using reserved registers on DM36x usb X-Git-Tag: v2013.10~28 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=99b4eaa68e0e2fdd9b0d0b1d40809d7e8f92044f;p=u-boot usb: Prevent using reserved registers on DM36x usb The musb driver defines and uses MUSB_CSR0_H_DIS_PING, however this bit is reserved on the DM36x. Thus this patch ensures that the reserved bit is not accesssed. It has been observed that some USB devices will fail to enumerate with errors such as 'error in inquiry' without this patch. See http://www.ti.com/litv/pdf/sprufh9a for details. Cc: Marek Vasut Cc: Tom Rini Signed-off-by: Andrew Murray Acked-by: Marek Vasut --- diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index 41a8126b3e..708fa124a2 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -417,8 +417,12 @@ static int ctrlreq_out_data_phase(struct usb_device *dev, u32 len, void *buffer) /* Set TXPKTRDY bit */ csr = readw(&musbr->txcsr); - writew(csr | MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY, - &musbr->txcsr); + + csr |= MUSB_CSR0_TXPKTRDY; +#if !defined(CONFIG_SOC_DM365) + csr |= MUSB_CSR0_H_DIS_PING; +#endif + writew(csr, &musbr->txcsr); result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY); if (result < 0) break; @@ -439,8 +443,10 @@ static int ctrlreq_out_status_phase(struct usb_device *dev) /* Set the StatusPkt bit */ csr = readw(&musbr->txcsr); - csr |= (MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY | - MUSB_CSR0_H_STATUSPKT); + csr |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_H_STATUSPKT); +#if !defined(CONFIG_SOC_DM365) + csr |= MUSB_CSR0_H_DIS_PING; +#endif writew(csr, &musbr->txcsr); /* Wait until TXPKTRDY bit is cleared */ @@ -457,7 +463,10 @@ static int ctrlreq_in_status_phase(struct usb_device *dev) int result; /* Set the StatusPkt bit and ReqPkt bit */ - csr = MUSB_CSR0_H_DIS_PING | MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT; + csr = MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT; +#if !defined(CONFIG_SOC_DM365) + csr |= MUSB_CSR0_H_DIS_PING; +#endif writew(csr, &musbr->txcsr); result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);