From: Rob Herring Date: Thu, 15 Dec 2011 11:15:50 +0000 (+0000) Subject: ARM: highbank: enable networking and pxe X-Git-Tag: v2012.04-rc1~320 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=9a420986cccc9bd2c37affd931d627b3c3e72952;p=u-boot ARM: highbank: enable networking and pxe This enables the XGMAC ethernet driver and networking related config options. Signed-off-by: Jason Hobbs Signed-off-by: Rob Herring --- diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index 8db8a2bb2c..b0aa182a81 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -33,6 +33,18 @@ int board_init(void) return 0; } +/* We know all the init functions have been run now */ +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_CALXEDA_XGMAC + rc += calxedaxgmac_initialize(0, 0xfff50000); + rc += calxedaxgmac_initialize(1, 0xfff51000); +#endif + return rc; +} + int misc_init_r(void) { ahci_init(0xffe08000); diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 9c85788353..5604733036 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -51,19 +51,27 @@ #define CONFIG_DOS_PARTITION +#define CONFIG_CALXEDA_XGMAC + +/* PXE support */ +#define CONFIG_BOOTP_PXE +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank" + /* * Command line configuration. */ #include -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS #define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_MEMORY #define CONFIG_CMD_LOADS #define CONFIG_CMD_SCSI #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_PXE +#define CONFIG_MENU #define CONFIG_BOOTDELAY 2 /* @@ -82,6 +90,12 @@ #define CONFIG_SYS_LOAD_ADDR 0x800000 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdtaddr_r=0x600000\0" \ + "pxefile_addr_r=0x700000\0" \ + "kernel_addr_r=0x800000\0" \ + "ramdisk_addr_r=0x01000000\0" \ + /*----------------------------------------------------------------------- * Stack sizes *