From: Tom Rini Date: Tue, 9 May 2017 02:14:25 +0000 (-0400) Subject: gw_ventana: Fix unused variable warnings X-Git-Tag: v2017.07-rc1~306 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=9ba8b9bdd7caa9c8821b10a6ecbb98c792905ec5;p=u-boot gw_ventana: Fix unused variable warnings The variable nfc_pads is only referenced when CONFIG_CMD_NAND is set, move the existing guard and drop a now redundant comment. The variable gwproto_gpio_pads is never referenced, remove it. Cc: Tim Harvey Signed-off-by: Tom Rini --- diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index d27bd57648..186eb18048 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -180,33 +180,6 @@ void setup_ventana_i2c(void) /* * Baseboard specific GPIO */ - -/* prototype */ -static iomux_v3_cfg_t const gwproto_gpio_pads[] = { - /* RS232_EN# */ - IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), - /* PANLEDG# */ - IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), - /* PANLEDR# */ - IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), - /* LOCLED# */ - IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), - /* RS485_EN */ - IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), - /* IOEXP_PWREN# */ - IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), - /* IOEXP_IRQ# */ - IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), - /* VID_EN */ - IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), - /* DIOI2C_DIS# */ - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), - /* PCICK_SSON */ - IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | DIO_PAD_CFG), - /* PCI_RST# */ - IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), -}; - static iomux_v3_cfg_t const gw51xx_gpio_pads[] = { /* PANLEDG# */ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index dc8cd883e9..c4c2d23532 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -76,7 +76,7 @@ static iomux_v3_cfg_t const enet_pads[] = { IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG), }; -/* NAND */ +#ifdef CONFIG_CMD_NAND static iomux_v3_cfg_t const nfc_pads[] = { IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)), IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)), @@ -95,7 +95,6 @@ static iomux_v3_cfg_t const nfc_pads[] = { IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL)), }; -#ifdef CONFIG_CMD_NAND static void setup_gpmi_nand(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;