From: Bin Meng Date: Thu, 8 Oct 2015 03:19:17 +0000 (-0700) Subject: cmd: bootvx: Always get VxWorks bootline from env X-Git-Tag: v2016.01-rc1~298^2~41 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=9e98b7e3c5010e918d0fdfae75ab7d6995c1fa75;p=u-boot cmd: bootvx: Always get VxWorks bootline from env So far VxWorks bootline can be contructed from various environment variables, but when these variables do not exist we get these from corresponding config macros. This is not helpful as it requires rebuilding U-Boot, and to make sure these config macros take effect we should not have these environment variables. This is a little bit complex and confusing. Now we change the logic to always contruct the bootline from environments (the only single source), by adding two new variables "bootdev" and "othbootargs", and adding some comments about network related settings mentioning they are optional. The doc about the bootline handling is also updated. Signed-off-by: Bin Meng Reviewed-by: Tom Rini Tested-by: Hannes Schmelzer --- diff --git a/README b/README index 0dc657d0a5..d18df54ec9 100644 --- a/README +++ b/README @@ -796,18 +796,10 @@ The following options need to be configured: - vxWorks boot parameters: bootvx constructs a valid bootline using the following - environments variables: bootfile, ipaddr, serverip, hostname. + environments variables: bootdev, bootfile, ipaddr, netmask, + serverip, gatewayip, hostname, othbootargs. It loads the vxWorks image pointed bootfile. - CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name - CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address - CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server - CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters - - CONFIG_SYS_VXWORKS_ADD_PARAMS - - Add it at the end of the bootline. E.g "u=username pw=secret" - Note: If a "bootargs" environment is defined, it will overwride the defaults discussed just above. diff --git a/common/cmd_elf.c b/common/cmd_elf.c index 6a0937823f..da70ef3e81 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -257,68 +257,83 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* * Use bootaddr to find the location in memory that VxWorks - * will look for the bootline string. The default value for - * PowerPC is LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET which - * defaults to 0x4200. + * will look for the bootline string. The default value is + * (LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET) as defined by + * VxWorks BSP. For example, on PowerPC it defaults to 0x4200. */ tmp = getenv("bootaddr"); - if (!tmp) - bootaddr = CONFIG_SYS_VXWORKS_BOOT_ADDR; - else - bootaddr = simple_strtoul(tmp, NULL, 16); - - /* - * Check to see if the bootline is defined in the 'bootargs' - * parameter. If it is not defined, we may be able to - * construct the info. - */ - bootline = getenv("bootargs"); - if (bootline) { - memcpy((void *)bootaddr, bootline, - max(strlen(bootline), (size_t)255)); - flush_cache(bootaddr, max(strlen(bootline), (size_t)255)); + if (!tmp) { + printf("## VxWorks bootline address not specified\n"); } else { - ptr = sprintf(build_buf, CONFIG_SYS_VXWORKS_BOOT_DEVICE); - tmp = getenv("bootfile"); - if (tmp) - ptr += sprintf(build_buf + ptr, "%s:%s ", - CONFIG_SYS_VXWORKS_SERVERNAME, tmp); - else - ptr += sprintf(build_buf + ptr, "%s:file ", - CONFIG_SYS_VXWORKS_SERVERNAME); + bootaddr = simple_strtoul(tmp, NULL, 16); - tmp = getenv("ipaddr"); - if (tmp) { - ptr += sprintf(build_buf + ptr, "e=%s", tmp); - tmp = getenv("netmask"); + /* + * Check to see if the bootline is defined in the 'bootargs' + * parameter. If it is not defined, we may be able to + * construct the info. + */ + bootline = getenv("bootargs"); + if (bootline) { + memcpy((void *)bootaddr, bootline, + max(strlen(bootline), (size_t)255)); + flush_cache(bootaddr, max(strlen(bootline), + (size_t)255)); + } else { + tmp = getenv("bootdev"); + if (tmp) + ptr = sprintf(build_buf, tmp); + else + printf("## VxWorks boot device not specified\n"); + + tmp = getenv("bootfile"); + if (tmp) + ptr += sprintf(build_buf + ptr, + "host:%s ", tmp); + else + ptr += sprintf(build_buf + ptr, + "host:vxWorks "); + + /* + * The following parameters are only needed if 'bootdev' + * is an ethernet device, otherwise they are optional. + */ + tmp = getenv("ipaddr"); if (tmp) { - __be32 addr = getenv_ip("netmask").s_addr; - ptr += sprintf(build_buf + ptr, ":%08x ", - ntohl(addr)); - } else { - ptr += sprintf(build_buf + ptr, " "); + ptr += sprintf(build_buf + ptr, "e=%s", tmp); + tmp = getenv("netmask"); + if (tmp) { + u32 mask = getenv_ip("netmask").s_addr; + ptr += sprintf(build_buf + ptr, + ":%08x ", ntohl(mask)); + } else { + ptr += sprintf(build_buf + ptr, " "); + } } - } - tmp = getenv("serverip"); - if (tmp) - ptr += sprintf(build_buf + ptr, "h=%s ", tmp); + tmp = getenv("serverip"); + if (tmp) + ptr += sprintf(build_buf + ptr, "h=%s ", tmp); - tmp = getenv("gatewayip"); - if (tmp) - ptr += sprintf(build_buf + ptr, "g=%s ", tmp); + tmp = getenv("gatewayip"); + if (tmp) + ptr += sprintf(build_buf + ptr, "g=%s ", tmp); - tmp = getenv("hostname"); - if (tmp) - ptr += sprintf(build_buf + ptr, "tn=%s ", tmp); + tmp = getenv("hostname"); + if (tmp) + ptr += sprintf(build_buf + ptr, "tn=%s ", tmp); -#ifdef CONFIG_SYS_VXWORKS_ADD_PARAMS - ptr += sprintf(build_buf + ptr, CONFIG_SYS_VXWORKS_ADD_PARAMS); -#endif + tmp = getenv("othbootargs"); + if (tmp) + ptr += sprintf(build_buf + ptr, tmp); + + memcpy((void *)bootaddr, build_buf, + max(strlen(build_buf), (size_t)255)); + flush_cache(bootaddr, max(strlen(build_buf), + (size_t)255)); + } - memcpy((void *)bootaddr, build_buf, - max(strlen(build_buf), (size_t)255)); - flush_cache(bootaddr, max(strlen(build_buf), (size_t)255)); + printf("## Using bootline (@ 0x%lx): %s\n", bootaddr, + (char *)bootaddr); } /* @@ -331,8 +346,6 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) else puts("## Not an ELF image, assuming binary\n"); - printf("## Using bootline (@ 0x%lx): %s\n", bootaddr, - (char *)bootaddr); printf("## Starting vxWorks at 0x%08lx ...\n", addr); dcache_disable(); diff --git a/include/vxworks.h b/include/vxworks.h index 122043c941..297a70f519 100644 --- a/include/vxworks.h +++ b/include/vxworks.h @@ -13,26 +13,4 @@ void boot_prep_vxworks(bootm_headers_t *images); void boot_jump_vxworks(bootm_headers_t *images); void do_bootvx_fdt(bootm_headers_t *images); -/* - * Use bootaddr to find the location in memory that VxWorks - * will look for the bootline string. The default value for - * PowerPC is LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET which - * defaults to 0x4200 - */ -#ifndef CONFIG_SYS_VXWORKS_BOOT_ADDR -#define CONFIG_SYS_VXWORKS_BOOT_ADDR 0x4200 -#endif - -#ifndef CONFIG_SYS_VXWORKS_BOOT_DEVICE -#if defined(CONFIG_4xx) -#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "emac(0,0)" -#else -#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "eth(0,0)" -#endif -#endif - -#ifndef CONFIG_SYS_VXWORKS_SERVERNAME -#define CONFIG_SYS_VXWORKS_SERVERNAME "srv" -#endif - #endif