From: Siva Durga Prasad Paladugu Date: Thu, 25 May 2017 06:45:24 +0000 (+0530) Subject: nand: zynq: Send address cycles as per onfi parameter page X-Git-Tag: v2018.07-rc1~159^2~20 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=9fdde6c4bbb6840dd175f0c29dfcc791fc0c1d2a;p=u-boot nand: zynq: Send address cycles as per onfi parameter page Send address cycles as per value read from onfi parameter page for Read and write commands instead of using a hard coded value. This may vary for different parts and hence use it from onfi parameter page value. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek --- diff --git a/drivers/mtd/nand/zynq_nand.c b/drivers/mtd/nand/zynq_nand.c index 4d0ea9e6b9..e932a58bf6 100644 --- a/drivers/mtd/nand/zynq_nand.c +++ b/drivers/mtd/nand/zynq_nand.c @@ -84,6 +84,9 @@ #define ZYNQ_NAND_ECC_BUSY (1 << 6) /* ECC block is busy */ #define ZYNQ_NAND_ECC_MASK 0x00FFFFFF /* ECC value mask */ +#define ZYNQ_NAND_ROW_ADDR_CYCL_MASK 0x0F +#define ZYNQ_NAND_COL_ADDR_CYCL_MASK 0xF0 + #define ZYNQ_NAND_MIO_NUM_NAND_8BIT 13 #define ZYNQ_NAND_MIO_NUM_NAND_16BIT 8 @@ -778,6 +781,7 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command, { struct nand_chip *chip = mtd->priv; const struct zynq_nand_command_format *curr_cmd = NULL; + u8 addr_cycles = 0; struct zynq_nand_info *xnand = (struct zynq_nand_info *)chip->priv; void *cmd_addr; unsigned long cmd_data = 0; @@ -828,8 +832,18 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command, else end_cmd = curr_cmd->end_cmd; + if (command == NAND_CMD_READ0 || + command == NAND_CMD_SEQIN) { + addr_cycles = chip->onfi_params.addr_cycles & + ZYNQ_NAND_ROW_ADDR_CYCL_MASK; + addr_cycles += ((chip->onfi_params.addr_cycles & + ZYNQ_NAND_COL_ADDR_CYCL_MASK) >> 4); + } else { + addr_cycles = curr_cmd->addr_cycles; + } + cmd_phase_addr = (unsigned long)xnand->nand_base | - (curr_cmd->addr_cycles << ADDR_CYCLES_SHIFT) | + (addr_cycles << ADDR_CYCLES_SHIFT) | (end_cmd_valid << END_CMD_VALID_SHIFT) | (COMMAND_PHASE) | (end_cmd << END_CMD_SHIFT) |