From: Stefan Roese Date: Thu, 8 May 2008 09:05:15 +0000 (+0200) Subject: ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards X-Git-Tag: v1.3.3~42 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a00eccfebc954ad9485161efeca7d9aaf626d530;p=u-boot ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards This patch adds fdt (flattened device tree) support to all remaining AMCC eval boards. Most newer boards already support device tree. With this patch, all AMCC boards now enable device tree passing from U-Boot to Linux arch/powerpc kernels. Signed-off-by: Stefan Roese --- diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 4ea040bc22..2f0df8ad2d 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -291,6 +291,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_HAS_ETH0 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ #define CONFIG_PHY1_ADDR 1 @@ -426,4 +427,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 784e7c0f8b..cbd74a0d8d 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -128,6 +128,7 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */ #define CONFIG_NET_MULTI 1 @@ -435,4 +436,8 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 88fd7caa7a..ba68fd4b96 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -201,6 +201,7 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 8 /* PHY address */ +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_PHY1_ADDR 9 /* EMAC1 PHY address */ #define CONFIG_NET_MULTI 1 @@ -306,4 +307,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index d2f6b1021a..cce883fd85 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -79,7 +79,7 @@ #define CFG_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */ #define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_LEN + 1) +#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1) #define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */ /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index af237d9be0..37151d31fd 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -195,6 +195,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_HAS_ETH0 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 #define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ @@ -306,4 +307,8 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index 5a6eb4a37d..be2b3ec7ef 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -330,4 +330,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 7db973676b..8a1ff1acba 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -114,6 +114,7 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0x14 /* PHY address */ +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */ #define CONFIG_NET_MULTI 1 @@ -433,4 +434,8 @@ unsigned char spi_read(void); #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 851a7ad40a..1879d38522 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -331,4 +331,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/walnut.h b/include/configs/walnut.h index f6e99aca77..adc420b9ad 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -92,6 +92,7 @@ #define CONFIG_PHY_ADDR 1 /* PHY address */ #define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ +#define CONFIG_HAS_ETH0 1 #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* needed for NetConsole */ @@ -346,4 +347,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 3bd115a38d..f22e79824c 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -139,15 +139,6 @@ #define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */ #define CFG_SDRAM_BANKS (2) - -/*----------------------------------------------------------------------- - * Device tree support (Linux-2.6.26+) - *----------------------------------------------------------------------*/ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ @@ -392,4 +383,8 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 1e3571eb4d..6f9d3e3c6f 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -541,4 +541,8 @@ /*---------------------------------------------------------------------------*/ +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */