From: Wolfgang Denk Date: Tue, 14 Oct 2008 20:13:41 +0000 (+0200) Subject: Update CHANGELOG X-Git-Tag: v2008.10-rc3~7 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a0b1b610e980e253d4c2519ee15bd0937c3f8be1;p=u-boot Update CHANGELOG Signed-off-by: Wolfgang Denk --- diff --git a/CHANGELOG b/CHANGELOG index 85dc920f2b..51984b8ab9 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,796 @@ +commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd +Author: Jason Jin +Date: Fri Oct 10 11:41:01 2008 +0800 + + Do not init SATA when disabled on 8536DS. + + SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the + driver still try to access the SATA registers, the cpu will hangup. + This patch try to fix this by reading the serdes status before the SATA + initialize. + + Signed-off-by: Jason Jin + Acked-by: Andy Fleming + +commit ec4d8c1c1d94a790c1473ae8aace282b817c3123 +Author: Nikita V. Youshchenko +Date: Fri Oct 3 00:03:55 2008 +0400 + + fsl_diu: fix alignment error that caused malloc corruption + + When aligning malloc()ed screen_base, invalid offset was added. + This not only caused misaligned result (which did not cause hardware + misbehaviour), but - worse - caused screen_base + smem_len to + be out of malloc()ed space, which in turn caused breakage of + futher malloc()/free() operation. + + This patch fixes screen_base alignment. + + Also this patch makes memset() that cleans framebuffer to be executed + on first initialization of diu, not only on re-initialization. It looks + correct to clean the framebuffer instead of displaying random garbage; + I believe that was disabled only because that memset caused breakage + of malloc/free described above - which no longer happens with the fix + described above. + + Signed-off-by: Nikita V. Youshchenko + +commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9 +Author: Matthias Fuchs +Date: Wed Sep 24 10:29:37 2008 +0200 + + api: Fix building with CONFIG_API + + This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE. + + USB_MAX_STOR_DEV is defined in include/usb.h, but + needed in api/api_storage.c. + + Signed-off-by: Matthias Fuchs + +commit abbb90666d5ef2f500ebbedbb80ff60adc56b043 +Author: Peter Tyser +Date: Tue Sep 23 12:39:40 2008 -0500 + + Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references + + Signed-off-by: Peter Tyser + +commit 81e612014c40c922ec35488d17c504d4e9286f06 +Author: Peter Tyser +Date: Tue Sep 23 12:38:42 2008 -0500 + + Remove CFG_EEPROM_PAGE* dependencies for temperature sensors + + The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and + CFG_EEPROM_PAGE_WRITE_BITS in various temperature + sensor drivers are not necessary + + Signed-off-by: Peter Tyser + +commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a +Author: Mike Frysinger +Date: Tue Oct 14 07:04:38 2008 -0400 + + cmd_spi: remove broken signed casting for display + + Since we're working with unsigned data, you can't apply a signed pointer + cast and then attempt to print the result. Otherwise you get wrong output + when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF". + + Signed-off-by: Mike Frysinger + +commit d5fd0b49210c941de8a1fce3947ace92243ab5ca +Author: Mike Frysinger +Date: Tue Oct 14 07:05:24 2008 -0400 + + strings cmd: drop old CONFIG_CFG_STRINGS define + + We don't need CONFIG_CFG_STRINGS anymore now that we have the define + CONFIG_CMD_STRINGS and Makefile control. + + Signed-off-by: Mike Frysinger + +commit fecb5ade3b37f62981f2b05b621005850173aaa9 +Author: Jason Jin +Date: Fri Sep 19 17:32:49 2008 +0800 + + Fix the NAND size overflow issue. + + When the total size of all NAND devices exceeds 4 GiB, the size will + overflow. This patch tries to fix this. + + Note that we still have a problem when a single NAND device is bigger + than 4 GiB: then the overflow would actually happen earlier, i. e. + when storing the size in nand_info[].size, as nand_info[].size is an + "u_int32_t". + + Signed-off-by: Jason Jin + Signed-off-by: Wolfgang Denk + +commit 30f574717277238b9014b8136c90eea77196490f +Author: Louis Su +Date: Wed Jul 9 11:01:37 2008 +0800 + + AX88180: new gigabit network driver + + Signed-off-by: Louis Su + Signed-off-by: Ben Warren + +commit c9d6b6925344740ca1db2f8a6bab7921ff820de3 +Author: Andre Schwarz +Date: Tue Aug 19 16:07:03 2008 +0200 + + enable 10/100M at VSC8601 at tsec driver + + Currently VSC8601 doesn't link with 10/100M partners if the + EEPROM/Strapping is not set up. + Setting the auto-neg register fixes this. + + Signed-off-by: Andre Schwarz + Signed-off-by: Ben Warren + +commit 702c85b0e876d587c11acdbb55738ee52acd54f4 +Author: Nobuhiro Iwamatsu +Date: Tue Sep 30 15:02:53 2008 +0900 + + net: ne2000: Divided a function of NE2000 driver + + get_prom function was used __attriute__ , but it is not enable. + ax88796.o does not do link besides ne2000.o. When ld is carried + out, get_prom function of ax88796.c is ignored. + This problem is a thing by specifications of ld. + I checked and test this patch on SuperH and MIPS. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Ben Warren + +commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393 +Author: Nobuhiro Iwamatsu +Date: Tue Oct 14 11:10:59 2008 +0900 + + sh: rsk7203: Add smc911x driver support to board config file + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit cae6f909baf86357b3c0bd01acfc414348c4d175 +Author: Nobuhiro Iwamatsu +Date: Thu Oct 9 13:54:33 2008 +0900 + + sh: Fix cannot execute a stand-alone application + + Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef +Author: Ed Swarthout +Date: Wed Oct 8 23:38:00 2008 -0500 + + fsl_pci_init do not scan bus when configured as an end-point + + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + +commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5 +Author: Hugo Villeneuve +Date: Tue Sep 16 17:07:53 2008 -0400 + + ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board. + + This is no longer necessary now that the GD_FLG_RELOC flag is set for + all ARM boards. + + Signed-off-by: Hugo Villeneuve + +commit d977a57356657ba241256231efca32828a5822f9 +Author: Luigi 'Comio' Mantellini +Date: Sat Sep 13 10:04:32 2008 +0200 + + Fix lzma uncompress call (image_start wrongly used instead image_len) + + Signed-off-by: Luigi 'Comio' Mantellini + +commit 392438406041415fe64ab8748ec5ab5ad01d1cf7 +Author: Nick Spence +Date: Thu Aug 28 14:09:15 2008 -0700 + + mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache + + This is needed in unlock_ram_in_cache() because it is called from C and + will corrupt the small data area anchor that is kept in R2. + + lock_ram_in_cache() is modified similarly as good coding practice, but + is not called from C. + + Signed-off-by: Nick Spence + +commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c +Author: Kumar Gala +Date: Tue Aug 19 15:05:34 2008 -0500 + + 86xx: remove redudant code with lib_ppc/interrupts.c + + For some reason we duplicated the majority of code in lib_ppc/interrupts.c + Not know how that happened, but there is no good reason for it. + + Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why + they exist. + + Signed-off-by: Kumar Gala + +commit 0d01f66d235118515b5086b88f82498bc0695d6a +Author: Ed Swarthout +Date: Thu Oct 9 01:26:36 2008 -0500 + + CFI: cfi_flash write fix for AMD legacy + + The flash_unlock_seq requires a sector for AMD_LEGACY. + Fix a retcode check typeo. + + Signed-off-by: Ed Swarthout + Signed-off-by: Stefan Roese + +commit 542b385a620a1783454a00424930e51895f45073 +Author: Matthias Fuchs +Date: Tue Oct 7 13:13:10 2008 +0200 + + ppc4xx: Fix USB 2.0 phy reset sequence + + This patch fixes USB 2.0 communication issues on some DU440 boards. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit df8c1ce11114c2260dedb5547281945f7db8fa5c +Author: Matthias Fuchs +Date: Tue Oct 7 13:13:09 2008 +0200 + + ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2 +Author: Matthias Fuchs +Date: Tue Oct 7 13:13:08 2008 +0200 + + ppc4xx: Fix DU440 GPIO configuration + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 35dd025c70fcc4389317db2f2a9d14795172137d +Author: Matthias Fuchs +Date: Tue Oct 7 13:13:07 2008 +0200 + + ppc4xx: Update DU440 config + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit f3bf9273939ffe1a60a32a2eef909097f15df56b +Author: Kumar Gala +Date: Wed Oct 8 15:36:39 2008 -0500 + + MPC8572DS: Fix compile warnings + + Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following + compile warnings: + + cmd_i2c.c:112: warning: missing braces around initializer + cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]') + + Signed-off-by: Kumar Gala + +commit dffd2446fb041f38ef034b0fcf41e51e5e489159 +Author: Wolfgang Grandegger +Date: Tue Sep 30 10:55:57 2008 +0200 + + 85xx: Using proper I2C source clock divider for MPC8544 + + Measurements with our MPC8544 board showed that the I2C bus frequency + is wrong by a factor of 1.5. Obviously, the interpretation of the + MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not + correct. There seems to be an error in the 8544 RM. + + Signed-off-by: Wolfgang Grandegger + +commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17 +Author: Rafal Czubak +Date: Wed Oct 8 13:41:30 2008 +0200 + + FSL: Fix get_cpu_board_revision() return value. + + get_cpu_board_revision() returned board revision based on information stored + in global static struct eeprom. It should instead use one from local struct + board_eeprom, to which the data is actually read from EEPROM. The bug led to + system hang after printing L1 cache information on U-Boot startup. The problem + was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx + boards using CFG_I2C_EEPROM_CCID. + + The change has been successfully tested on MPC8555CDS system. + + Signed-off-by: Rafal Czubak + +commit 747f316cca484ed627a97dd3391febabce384186 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Sep 30 20:08:49 2008 +0200 + + update uImage FIT multi documentation + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Sep 30 20:08:36 2008 +0200 + + move README.imx31 to doc/ and merge with README.mx31 + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96 +Author: Guennadi Liakhovetski +Date: Thu Sep 25 20:54:37 2008 +0200 + + i.MX31: switch to CFG_HZ=1000 + + Switch to the standard CFG_HZ=1000 value, while at it, minor white-space + cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads, + provides 2% or 0.4% precision depending on the + CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s + boot-delay. + + Signed-off-by: Guennadi Liakhovetski + +commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2 +Author: gnusercn +Date: Wed Oct 8 18:58:58 2008 +0200 + + Fix bug: in arch-arm, env_get_char dose not work fine + + due to the arm implementation which supposed that U-Boot is in RAM + when we jump to start_armboot + + Signed-off-by: gnusercn + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f +Author: Adam Graham +Date: Mon Oct 6 10:16:13 2008 -0700 + + ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change + + After changing SDRAM_CLKTR phase value rerun the memory preload + initialization sequence (INITPLR) to reset and relock the memory + DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing + adjustment effects the phase relationship of the internal, to the + PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT. + + Signed-off-by: Adam Graham + Signed-off-by: Victor Gallardo + Signed-off-by: Stefan Roese + +commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e +Author: Haiying Wang +Date: Fri Oct 3 11:48:03 2008 -0400 + + Remove redundant #define for MPC8536DS + + Signed-off-by: Haiying Wang + +commit 445a7b38308eb05b41de74165b20855db58c7ee5 +Author: Haiying Wang +Date: Fri Oct 3 11:47:30 2008 -0400 + + Add ID EEPROM support for MPC8572DS + + The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for + system information like mac addresses etc. This patch enables it. + + Signed-off-by: Haiying Wang + +commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540 +Author: Haiying Wang +Date: Fri Oct 3 11:46:59 2008 -0400 + + Minor fixes for I2C address on MPC8572DS + + MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1 + according to the board spec, and adds the 2nd i2c bus offset. + + Signed-off-by: Haiying Wang + +commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c +Author: Jason Jin +Date: Sat Sep 27 14:40:57 2008 +0800 + + Fix the incorrect DDR clk freq reporting on 8536DS + + On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111), + The display is still sync mode DDR freq. This patch try to fix + this. The display DDR freq is now the actual freq in both + sync and async mode. + + Signed-off-by: Jason Jin + +commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4 +Author: Kumar Gala +Date: Tue Oct 7 10:28:46 2008 -0500 + + 85xx: Remove setting of *cache-line-size in device trees + + ePAPR says if the *cache-block-size is the same as *cache-line-size + than we don't need the *cache-line-size property. + + Signed-off-by: Kumar Gala + +commit cd3cb0d9269d155276b00207e3816a9347fd1c92 +Author: Gerald Van Baren +Date: Sat Oct 4 07:56:06 2008 -0400 + + libfdt: Fix error in documentation for fdt_get_alias_namelen() + + Oops, screwed up the function name in the documenting comment for this + function. Trivial correction in this patch. + + Signed-off-by: David Gibson + Acked-by: Gerald Van Baren + +commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c +Author: David Gibson +Date: Wed Aug 20 16:55:14 2008 +1000 + + libfdt: Add function to explicitly expand aliases + + Kumar has already added alias expansion to fdt_path_offset(). + However, in some circumstances it may be convenient for the user of + libfdt to explicitly get the string expansion of an alias. This patch + adds a function to do this, fdt_get_alias(), and uses it to implement + fdt_path_offset(). + + Signed-off-by: David Gibson + +commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737 +Author: Mike Frysinger +Date: Thu Oct 2 01:55:38 2008 -0400 + + cfi_flash: do not reset flash when probe fails + + The CFI flash driver starts at flash_init() which calls down into + flash_get_size(). This starts by calling flash_detect_cfi(). If said + function fails, flash_get_size() finishes by attempting to reset the + flash. Unfortunately, it does this with an info->portwidth set to 0x10 + which filters down into flash_make_cmd() and that happily smashes the + stack by sticking info->portwidth bytes into a cfiword_t variable that + lives on the stack. On a 64bit system you probably won't notice, but + killing the last 8 bytes on a 32bit system usually leads to a corrupt + return address. Which is what happens on a Blackfin system. + + Signed-off-by: Mike Frysinger + Signed-off-by: Stefan Roese + +commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3 +Author: Stefan Roese +Date: Fri Sep 26 17:03:26 2008 +0200 + + fdt: Overwrite /chosen node in bootm if it already exists in the dtb + + Set force parameter in fdt_chosen() call in do_bootm_linux() call. + Without this, the chosen node is not overwritten if it already + exists. + + Signed-off-by: Stefan Roese + +commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d +Author: Jon Loeliger +Date: Thu Sep 25 11:02:17 2008 -0500 + + Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3. + + Using Gcc 4.3 detected this problem: + + ../dtc/libfdt/fdt.c: In function 'fdt_next_tag': + ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not + occur when assuming that (X + c) < X is always false + + To fix the problem, treat the offset as an unsigned int. + + The problem report and proposed fix were provided + by Steve Papacharalambous . + + Signed-off-by: Jon Loeliger + +commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d +Author: David Gibson +Date: Fri Aug 29 14:19:13 2008 +1000 + + libfdt: Fix bugs in fdt_get_path() + + The current implementation of fdt_get_path() has a couple of bugs, + fixed by this patch. + + First, contrary to its documentation, on success it returns the length + of the node's path, rather than 0. The testcase is correspondingly + wrong, and the patch fixes this as well. + + Second, in some circumstances, it will return -FDT_ERR_BADOFFSET + instead of -FDT_ERR_NOSPACE when given insufficient buffer space. + Specifically this happens when there is insufficient space even to + hold the path's second last component. This behaviour is corrected, + and the testcase updated to check it. + + Signed-off-by: David Gibson + +commit 33af3e6656e84660d397b5dd95abab2dccc36f83 +Author: Wolfgang Denk +Date: Wed Oct 1 12:34:58 2008 +0200 + + TQM5200: enable support for ATAPI devices + + Signed-off-by: Wolfgang Denk + +commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Sep 15 05:48:25 2008 +0200 + + Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM" + + we need this due to the arm implementation which supposed that U-Boot + is in RAM when we jump to start_armboot + + This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d. + in order to do it for all arm board + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2 +Author: Kim Phillips +Date: Wed Sep 24 08:46:25 2008 -0500 + + mpc83xx: don't disable autoboot + + bootdelay set to -1 'permanently' disables autobooting, even if + bootcmd is specified. Change to a positive value to allow + autobooting when a bootcmd is set. + + Reported-by: Coray Tate + Cc: Scott Wood + Signed-off-by: Kim Phillips + +commit 2fb29c520c42b7bfef33ea3fd1527eba64099164 +Author: Nobuhiro Iwamatsu +Date: Wed Sep 24 10:42:15 2008 +0900 + + mpc83xx: Fix typo in include/mpc83xx.h + + Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Kim Phillips + +commit 162c41c03179727a1d14262f703c9a8bc40231fa +Author: Kim Phillips +Date: Tue Sep 23 09:38:49 2008 -0500 + + mpc83xx: add h/w flash protection to board configs + + the operating system may leave flash in a h/w locked state after writing. + This allows u-boot to continue to write flash by enabling h/w unlocking + by default. + + Signed-off-by: Kim Phillips + +commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70 +Author: Anton Vorontsov +Date: Thu Sep 11 21:35:36 2008 +0400 + + mpc83xx: spd_sdram: fix ddr sdram base address assignment bug + + The spd_dram code shifts the base address, then masks 20 bits, but + forgets to shift the base address back. Fix this by just masking the + base address correctly. + + Found this bug while trying to relocate a DDR memory at the base != 0. + + Signed-off-by: Anton Vorontsov + Signed-off-by: Kim Phillips + +commit 8fd4166c467a46773f80208bda1ec3b4757747bc +Author: Stefan Roese +Date: Mon Sep 22 16:10:43 2008 +0200 + + ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup + + Depending on the configuration jumper "SATA SELECT", U-Boot disabled + either one PCIe node or the SATA node in the device tree blob. This + patch removes the unnecessary and even confusing warning, when the node + is not found at all. + + Signed-off-by: Stefan Roese + +commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9 +Author: Remy Bohmer +Date: Fri Sep 19 13:30:06 2008 +0200 + + Add missing device types to dev_print() in part.c + + Signed-off-by: Remy Bohmer + +commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed +Author: Wolfgang Denk +Date: Mon Sep 22 22:23:06 2008 +0200 + + Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which + eventually leads to a machine check. This change assures that DPRAM + is allocated only once in that case. + + Signed-off-by: Gary Jennejohn + Signed-off-by: Wolfgang Denk + +commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23 +Author: Laurent Pinchart +Date: Wed Sep 17 17:57:34 2008 +0200 + + Fix Spartan-3 definitions. + + A few Spartan-3 definitions erroneously use Spartan-3E size + constants. This patch fixes them. + + Signed-off-by: Laurent Pinchart + +commit 28113e1f0da4146b823ffce37680d31d5685a60b +Author: Laurent Pinchart +Date: Wed Sep 17 17:41:58 2008 +0200 + + Remove duplicate Spartan-3E definition. + + Signed-off-by: Laurent Pinchart + Signed-off-by: Wolfgang Denk + +commit 5c65ecf7cd94df250b295621f3b24135cbcfe579 +Author: Anatolij Gustschin +Date: Wed Sep 17 13:46:17 2008 +0200 + + socrates: change default mtest address range + + Running mtest command on socrates without specifying + an address range crashes the board. This patch changes + default mtest address range to prevent this behavior. + + Signed-off-by: Anatolij Gustschin + +commit d666b2d59674b5e002c0821b7ab83ec3ff90d670 +Author: Anatolij Gustschin +Date: Wed Sep 17 12:34:45 2008 +0200 + + socrates: fix crash after relocation + + Currently U-Boot crashes after relocation to RAM. + Changing the CPO value of the DDR SDRAM TIMING_CFG_2 + register to READ_LAT + 1 (to the value it was before + conversion of socrates to new DDR code) fixes the + problem. + + Signed-off-by: Anatolij Gustschin + +commit 562788b0a303f3528b920d81f547f5ca77ba528e +Author: Anatolij Gustschin +Date: Wed Sep 17 11:45:51 2008 +0200 + + socrates: fix SPD EEPROM address + + Commit be0bd8234b9777ecd63c4c686f72af070d886517 + changed SPD EEPROM address to 0x51 and DDR SDRAM + detection stopped working. Change this address + back to 0x50. + + Signed-off-by: Anatolij Gustschin + +commit 023824549a370bd185d7129d9a6c86f9be7b86a8 +Author: Stefan Roese +Date: Mon Sep 22 11:06:50 2008 +0200 + + Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)" + + This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8. + + Signed-off-by: Stefan Roese + +commit b5d10a13525c07ec6374adf840d7c87553b5f189 +Author: Nobuhiro Iwamatsu +Date: Thu Sep 18 19:34:36 2008 +0900 + + sh: Fix compile warning + + Signed-off-by: Nobuhiro Iwamatsu + +commit 4a065abf926f128beb36d93449defa0d690e7fef +Author: Nobuhiro Iwamatsu +Date: Thu Sep 18 19:04:26 2008 +0900 + + sh: Add support watchdog for SH4A core + + Add support watchdog for SH4A core (SH7763, SH7780 and SH7785). + And fix some compile warning. + + Signed-off-by: Nobuhiro Iwamatsu + +commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57 +Author: Nobuhiro Iwamatsu +Date: Wed Sep 17 11:45:26 2008 +0900 + + sh: Fix typo in SH serial driver + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 6b44a439215ba7c63f666f8099213ea4f05f2b07 +Author: Nobuhiro Iwamatsu +Date: Wed Sep 17 11:08:36 2008 +0900 + + sh: Add support any page size and empty_zero_page to SH Linux uImage + + Old U-Boot supported 4KB page size only. If this version, Linux + kernel can not get command line from U-Boot. + SH Linux kernel can change page size and empty_zero_page. + This patch support this function and fix promlem. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit ce9f99ddb59628f41dc534e892368a7d66dfc774 +Author: Nobuhiro Iwamatsu +Date: Thu Aug 28 13:40:52 2008 +0900 + + sh: rsk7203: Add support pkt_data_pull and pkt_data_push function + + Add function of smc911x, pkt_data_pull and pkt_data_push. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit dd820b03a2f45e86e7960e26729a3b58e3dda44a +Author: Wolfgang Denk +Date: Thu Sep 18 13:57:32 2008 +0200 + + ADS5121: fix typo in "rootpath" default setting + + Signed-off-by: Wolfgang Denk + +commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670 +Author: Wolfgang Denk +Date: Wed Sep 17 10:17:55 2008 +0200 + + Coding style cleanup; update CHANEGLOG + + Signed-off-by: Wolfgang Denk + +commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8 +Author: Victor Gallardo +Date: Tue Sep 16 06:59:13 2008 -0700 + + ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB) + + Signed-off-by: Victor Gallardo + Signed-off-by: Adam Graham + Signed-off-by: Stefan Roese + +commit ce47eb402c5e29a025399dc282246414fc492940 +Author: Peter Tyser +Date: Tue Sep 16 10:04:47 2008 -0500 + + Support for multiple SGMII/TBI interfaces for TSEC ethernet + + Fix TBI PHY accesses to use the proper offset in CPU register space. The + previous code would incorrectly access the TBI PHY by reading/writing to CPU + register space at the same location as would be used to access external PHYs. + + Signed-off-by: Peter Tyser + Acked-by: Andy Fleming + commit 7c803be2eb3cae245dedda438776e08fb122250f Author: Wolfgang Denk Date: Tue Sep 16 18:02:19 2008 +0200