From: Marek Vasut <marex@denx.de>
Date: Mon, 28 Oct 2013 11:29:30 +0000 (+0100)
Subject: ARM: mxs: Enable DCDC converter for battery boot
X-Git-Tag: v2014.01-rc1~77^2^2~5
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a0f97610757d6370fc58849032b36a94b4167fdc;p=u-boot

ARM: mxs: Enable DCDC converter for battery boot

In case the board detected sufficient voltage for battery boot,
make sure the DCDC converter is ON and the board is not running
only from linregs, otherwise an instability will be observed.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
---

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index 8ea45be1d2..d25019a51e 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -654,6 +654,8 @@ static void mxs_batt_boot(void)
 	clrsetbits_le32(&power_regs->hw_power_5vctrl,
 		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
 		0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+
+	mxs_power_enable_4p2();
 }
 
 /**