From: Fabio Estevam <fabio.estevam@nxp.com>
Date: Thu, 29 Jun 2017 12:33:44 +0000 (-0300)
Subject: mx6: soc: Move mxs_dma_init() into the mxs nand driver
X-Git-Tag: v2017.09-rc1~190^2~21
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a1d1fdc920cfb4c0126e5f8ff5233dd391548a0b;p=u-boot

mx6: soc: Move mxs_dma_init() into the mxs nand driver

Currently the following build error is seen when a board using MMC SPL
is built and the MXS nand driver is also selected:

arch/arm/cpu/armv7/built-in.o: In function `arch_cpu_init':
arch/arm/cpu/armv7/mx6/soc.c:432: undefined reference to 'mxs_dma_init'

On mx6 the only user of mxs_dma_init() is the mxs nand driver, so
move it there.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index b881766487..832ef251b8 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -427,11 +427,6 @@ int arch_cpu_init(void)
 
 	imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
 
-#ifdef CONFIG_APBH_DMA
-	/* Start APBH DMA */
-	mxs_dma_init();
-#endif
-
 	init_src();
 
 	return 0;
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 92005448d2..5aa36082dd 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -1114,6 +1114,7 @@ int mxs_nand_init(struct mxs_nand_info *info)
 	}
 
 	/* Init the DMA controller. */
+	mxs_dma_init();
 	for (j = MXS_DMA_CHANNEL_AHB_APBH_GPMI0;
 		j <= MXS_DMA_CHANNEL_AHB_APBH_GPMI7; j++) {
 		ret = mxs_dma_init_channel(j);