From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Date: Thu, 7 Nov 2013 13:51:43 +0000 (+0400)
Subject: cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM
X-Git-Tag: v2014.01-rc1~59
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a2e0a45d2e1e258cbe9bd3dbbe7bc7cacbf7a84e;p=u-boot

cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM

Data "offset" is not used directly in case of I2C EEPROM. Istead it is
split into "block number" and "offset within mentioned block". Which are
"addr[0]" and "addr[1]" respectively.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Mischa Jonker <mjonker@synopsys.com>
---

diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index ef694d8f87..02539c40a0 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -161,7 +161,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
 		spi_read (addr, alen, buffer, len);
 #else
-		if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
+		if (i2c_read (addr[0], addr[1], alen-1, buffer, len) != 0)
 			rcode = 1;
 #endif
 		buffer += len;
@@ -339,7 +339,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		/* Write is enabled ... now write eeprom value.
 		 */
 #endif
-		if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
+		if (i2c_write (addr[0], addr[1], alen-1, buffer, len) != 0)
 			rcode = 1;
 
 #endif