From: Khoronzhuk, Ivan Date: Wed, 22 Oct 2014 14:18:21 +0000 (+0300) Subject: soc: keystone_serdes: create a separate SGMII SerDes driver X-Git-Tag: v2015.01-rc1~125^2~30 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a43febde4452f254621c0c95d452c89ad498e959;p=u-boot soc: keystone_serdes: create a separate SGMII SerDes driver This patch split the Keystone II SGMII SerDes related code from Ethernet driver and create a separate SGMII SerDes driver. The SerDes driver can be used by others keystone subsystems like PCI, sRIO, so move it to driver/soc/keystone directory. Add soc specific drivers directory like in the Linux kernel. It is going to be used by keysotone soc specific drivers. Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- diff --git a/arch/arm/include/asm/ti-common/keystone_serdes.h b/arch/arm/include/asm/ti-common/keystone_serdes.h new file mode 100644 index 0000000000..2e12b05d05 --- /dev/null +++ b/arch/arm/include/asm/ti-common/keystone_serdes.h @@ -0,0 +1,15 @@ +/* + * Texas Instruments Keystone SerDes driver + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __TI_KEYSTONE_SERDES_H__ +#define __TI_KEYSTONE_SERDES_H__ + +void ks2_serdes_sgmii_156p25mhz_setup(void); + +#endif /* __TI_KEYSTONE_SERDES_H__ */ diff --git a/drivers/Makefile b/drivers/Makefile index d8361d95fd..33227c8bd6 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -19,3 +19,5 @@ obj-$(CONFIG_QE) += qe/ obj-y += memory/ obj-y += pwm/ obj-y += input/ +# SOC specific infrastructure drivers. +obj-y += soc/ diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index 33197f95b9..63f33611cb 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -14,6 +14,7 @@ #include #include #include +#include unsigned int emac_open; static unsigned int sys_has_mdio = 1; @@ -38,6 +39,7 @@ struct rx_buff_desc net_rx_buffs = { }; static void keystone2_eth_mdio_enable(void); +static void keystone2_net_serdes_setup(void); static int gen_get_link_speed(int phy_addr); @@ -406,7 +408,7 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) sys_has_mdio = (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0; - sgmii_serdes_setup_156p25mhz(); + keystone2_net_serdes_setup(); if (sys_has_mdio) keystone2_eth_mdio_enable(); @@ -552,142 +554,7 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv) return 0; } -void sgmii_serdes_setup_156p25mhz(void) +static void keystone2_net_serdes_setup(void) { - unsigned int cnt; - - /* - * configure Serializer/Deserializer (SerDes) hardware. SerDes IP - * hardware vendor published only register addresses and their values - * to be used for configuring SerDes. So had to use hardcoded values - * below. - */ - clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000); - clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282); - clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438); - clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700); - clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000); - - clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800); - clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000); - clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00); - clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600); - clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000); - clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000); - clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000); - clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b); - clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000); - clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e); - clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003); - clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f); - - clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00); - clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72); - clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100); - clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060); - clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000); - clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220); - clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602); - clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1); - clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989); - clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001); - clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000); - clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000); - clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d); - - /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/ - clrbits_le32(0x0232a010, 1 << 28); - - /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */ - clrbits_le32(0x0232a228, 1 << 29); - writel(0xF800F8C0, 0x0232bfe0); - clrbits_le32(0x0232a428, 1 << 29); - writel(0xF800F8C0, 0x0232bfe4); - clrbits_le32(0x0232a628, 1 << 29); - writel(0xF800F8C0, 0x0232bfe8); - clrbits_le32(0x0232a828, 1 << 29); - writel(0xF800F8C0, 0x0232bfec); - - /*Enable pll via the pll_ctrl 0x0014*/ - writel(0xe0000000, 0x0232bff4) - ; - - /*Waiting for SGMII Serdes PLL lock.*/ - for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--) - ; - - for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--) - ; - - for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--) - ; - - for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--) - ; - - udelay(45000); -} - -void sgmii_serdes_shutdown(void) -{ - /* - * shutdown SerDes hardware. SerDes hardware vendor published only - * register addresses and their values. So had to use hardcoded - * values below. - */ - clrbits_le32(0x0232bfe0, 3 << 29 | 3 << 13); - setbits_le32(0x02320228, 1 << 29); - clrbits_le32(0x0232bfe4, 3 << 29 | 3 << 13); - setbits_le32(0x02320428, 1 << 29); - clrbits_le32(0x0232bfe8, 3 << 29 | 3 << 13); - setbits_le32(0x02320628, 1 << 29); - clrbits_le32(0x0232bfec, 3 << 29 | 3 << 13); - setbits_le32(0x02320828, 1 << 29); - - clrbits_le32(0x02320034, 3 << 29); - setbits_le32(0x02320010, 1 << 28); + ks2_serdes_sgmii_156p25mhz_setup(); } diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile new file mode 100644 index 0000000000..3d4baa51d6 --- /dev/null +++ b/drivers/soc/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the U-boot SOC specific device drivers. +# + +obj-$(CONFIG_ARCH_KEYSTONE) += keystone/ diff --git a/drivers/soc/keystone/Makefile b/drivers/soc/keystone/Makefile new file mode 100644 index 0000000000..c000ecac76 --- /dev/null +++ b/drivers/soc/keystone/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_TI_KEYSTONE_SERDES) += keystone_serdes.o diff --git a/drivers/soc/keystone/keystone_serdes.c b/drivers/soc/keystone/keystone_serdes.c new file mode 100644 index 0000000000..dc4e78d575 --- /dev/null +++ b/drivers/soc/keystone/keystone_serdes.c @@ -0,0 +1,127 @@ +/* + * TI serdes driver for keystone2. + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +void ks2_serdes_sgmii_156p25mhz_setup(void) +{ + unsigned int cnt; + + /* + * configure Serializer/Deserializer (SerDes) hardware. SerDes IP + * hardware vendor published only register addresses and their values + * to be used for configuring SerDes. So had to use hardcoded values + * below. + */ + clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000); + clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282); + clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438); + clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700); + clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000); + + clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800); + clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000); + clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00); + clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600); + clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000); + clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000); + clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000); + clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b); + clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000); + clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e); + clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003); + clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f); + + clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00); + clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72); + clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100); + clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060); + clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000); + clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220); + clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602); + clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1); + clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989); + clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001); + clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000); + clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000); + clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d); + + /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/ + clrbits_le32(0x0232a010, 1 << 28); + + /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */ + clrbits_le32(0x0232a228, 1 << 29); + writel(0xF800F8C0, 0x0232bfe0); + clrbits_le32(0x0232a428, 1 << 29); + writel(0xF800F8C0, 0x0232bfe4); + clrbits_le32(0x0232a628, 1 << 29); + writel(0xF800F8C0, 0x0232bfe8); + clrbits_le32(0x0232a828, 1 << 29); + writel(0xF800F8C0, 0x0232bfec); + + /*Enable pll via the pll_ctrl 0x0014*/ + writel(0xe0000000, 0x0232bff4) + ; + + /*Waiting for SGMII Serdes PLL lock.*/ + for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--) + ; + for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--) + ; + for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--) + ; + for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--) + ; + + udelay(45000); +} diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 45bd72d2de..034cbfd4d7 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -41,4 +41,7 @@ #define CONFIG_KSNET_NETCP_V1_0 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 +/* SerDes */ +#define CONFIG_TI_KEYSTONE_SERDES + #endif /* __CONFIG_K2HK_EVM_H */