From: Jean-Jacques Hiblot Date: Tue, 30 Jan 2018 15:01:37 +0000 (+0100) Subject: mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm X-Git-Tag: v2018.03-rc3~3^2~19 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a4efd73773c792737dd8d1e9d18da7796418fc1f;p=u-boot mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm >From OMAP3 SoCs (OMAP3, OMAP4, OMAP5, AM572x, AM571x), the DAT/CMD lines reset procedure section in TRM suggests to first poll the SRD/SRC bit until it is set to 0x1. But looks like that bit is never set to 1 and there is an observable delay of 1sec everytime the driver tries to reset DAT/CMD. (The same is observed in linux kernel). Reduce the time the driver waits for the controller to set the SRC/SRD bits to 1 so that there is no observable delay. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Jean-Jacques Hiblot --- diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 55232103e0..ab4a095233 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -108,6 +108,7 @@ struct omap_hsmmc_adma_desc { /* If we fail after 1 second wait, something is really bad */ #define MAX_RETRY_MS 1000 +#define MMC_TIMEOUT_MS 20 /* DMA transfers can take a long time if a lot a data is transferred. * The timeout must take in account the amount of data. Let's assume @@ -598,7 +599,7 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) if (!(readl(&mmc_base->sysctl) & bit)) { start = get_timer(0); while (!(readl(&mmc_base->sysctl) & bit)) { - if (get_timer(0) - start > MAX_RETRY_MS) + if (get_timer(0) - start > MMC_TIMEOUT_MS) return; } }