From: Lokesh Vutla Date: Sat, 22 Apr 2017 10:27:25 +0000 (+0530) Subject: serial: omap: Support debug UART X-Git-Tag: v2017.07-rc1~341 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a52cf086ace7e6107f399fcf37059dc9e02916f3;p=u-boot serial: omap: Support debug UART Add debug UART functions to permit omap specific ns16550 to provide an early debug UART. This is mostly in common with DEBUG_UART_NS16550 except for Mode definition register which is required for selecting UART mode(16x auto-baud or 13x mode). Signed-off-by: Lokesh Vutla Reviewed-by: Simon Glass Reviewed-by: Tom Rini --- diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 724994568d..58fc7cd2e6 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -257,6 +257,13 @@ config DEBUG_UART_UNIPHIER driver will be available until the real driver-model serial is running. +config DEBUG_UART_OMAP + bool "OMAP uart" + help + Select this to enable a debug UART using the omap ns16550 driver. + You will need to provide parameters to make this work. The driver + will be available until the real driver model serial is running. + endchoice config DEBUG_UART_BASE diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 4f86780cb1..ca55df78b7 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -246,17 +246,6 @@ int NS16550_tstc(NS16550_t com_port) #include -#define serial_dout(reg, value) \ - serial_out_shift((char *)com_port + \ - ((char *)reg - (char *)com_port) * \ - (1 << CONFIG_DEBUG_UART_SHIFT), \ - CONFIG_DEBUG_UART_SHIFT, value) -#define serial_din(reg) \ - serial_in_shift((char *)com_port + \ - ((char *)reg - (char *)com_port) * \ - (1 << CONFIG_DEBUG_UART_SHIFT), \ - CONFIG_DEBUG_UART_SHIFT) - static inline void _debug_uart_init(void) { struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; @@ -293,6 +282,42 @@ DEBUG_UART_FUNCS #endif +#ifdef CONFIG_DEBUG_UART_OMAP + +#include + +static inline void _debug_uart_init(void) +{ + struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; + int baud_divisor; + + baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, + CONFIG_BAUDRATE); + serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); + serial_dout(&com_port->mdr1, 0x7); + serial_dout(&com_port->mcr, UART_MCRVAL); + serial_dout(&com_port->fcr, UART_FCR_DEFVAL); + + serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); + serial_dout(&com_port->dll, baud_divisor & 0xff); + serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); + serial_dout(&com_port->lcr, UART_LCRVAL); + serial_dout(&com_port->mdr1, 0x0); +} + +static inline void _debug_uart_putc(int ch) +{ + struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; + + while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) + ; + serial_dout(&com_port->thr, ch); +} + +DEBUG_UART_FUNCS + +#endif + #ifdef CONFIG_DM_SERIAL static int ns16550_serial_putc(struct udevice *dev, const char ch) { diff --git a/include/debug_uart.h b/include/debug_uart.h index 2980ae6200..6f0b0c5e15 100644 --- a/include/debug_uart.h +++ b/include/debug_uart.h @@ -111,6 +111,17 @@ void printhex8(uint value); #define _DEBUG_UART_ANNOUNCE #endif +#define serial_dout(reg, value) \ + serial_out_shift((char *)com_port + \ + ((char *)reg - (char *)com_port) * \ + (1 << CONFIG_DEBUG_UART_SHIFT), \ + CONFIG_DEBUG_UART_SHIFT, value) +#define serial_din(reg) \ + serial_in_shift((char *)com_port + \ + ((char *)reg - (char *)com_port) * \ + (1 << CONFIG_DEBUG_UART_SHIFT), \ + CONFIG_DEBUG_UART_SHIFT) + /* * Now define some functions - this should be inserted into the serial driver */