From: Heiko Schocher Date: Mon, 25 Jun 2007 17:11:37 +0000 (+0200) Subject: [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG X-Git-Tag: v1.3.0-rc1~42^2~1^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a5d71e290f3673269be8eefb4ec44f53412f9461;p=u-boot [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG Signed-off-by: Heiko Schocher --- diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index f638589df2..8b2427aa94 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -506,8 +506,6 @@ int checkboard(void) return (0); } - -#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) void spd_ddr_init_hang (void) { status_led_set (0, STATUS_LED_OFF); @@ -520,7 +518,6 @@ void spd_ddr_init_hang (void) udelay (100000); } } -#endif long int initdram (int board_type) { diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 8621aa00cf..a384392406 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -70,12 +70,14 @@ #define ONE_BILLION 1000000000 -#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) -extern void spd_ddr_init_hang (void); -#define HANG() spd_ddr_init_hang() -#else -#define HANG() hang() -#endif +/* + * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed + */ +void __spd_ddr_init_hang (void) +{ + hang (); +} +void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); /*----------------------------------------------------------------------------- | Memory Controller Options 0 @@ -474,7 +476,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } } @@ -497,7 +499,7 @@ static void check_mem_type(unsigned long *dimm_populated, dimm_num); printf("Only DDR SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; } } @@ -517,7 +519,7 @@ static void check_volt_type(unsigned long *dimm_populated, if (voltage_type != 0x04) { printf("ERROR: DIMM %lu with unsupported voltage level.\n", dimm_num); - HANG(); + spd_ddr_init_hang (); } else { debug("DIMM %lu voltage level supported.\n", dimm_num); } @@ -588,7 +590,7 @@ static void program_cfg0(unsigned long *dimm_populated, printf("WARNING: DIMM with datawidth of %lu bits.\n", data_width); printf("Only DIMMs with 32 or 64 bit datawidths supported.\n"); - HANG(); + spd_ddr_init_hang (); } break; } @@ -776,7 +778,7 @@ static void program_tr0(unsigned long *dimm_populated, if ((tcyc_reg & 0x0F) >= 10) { printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n", dimm_num); - HANG(); + spd_ddr_init_hang (); } cycle_time_ns_x_10[cas_index] = @@ -856,7 +858,7 @@ static void program_tr0(unsigned long *dimm_populated, printf("ERROR: No supported CAS latency with the installed DIMMs.\n"); printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range.\n"); - HANG(); + spd_ddr_init_hang (); } /* @@ -1168,7 +1170,7 @@ static void program_tr1(void) */ if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay.\n"); - HANG(); + spd_ddr_init_hang (); } /* @@ -1318,7 +1320,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", bank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } switch (num_col_addr) { @@ -1340,7 +1342,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } /* diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index d748daee01..626b3e69bd 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -129,12 +129,15 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif -#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) -extern void spd_ddr_init_hang (void); -#define HANG() spd_ddr_init_hang() -#else -#define HANG() hang() -#endif +/* + * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed + */ +void __spd_ddr_init_hang (void) +{ + hang (); +} +void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); + /* Private Structure Definitions */ @@ -589,7 +592,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } } @@ -636,42 +639,42 @@ static void check_mem_type(unsigned long *dimm_populated, "slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 2: printf("ERROR: EDO DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 3: printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 4: printf("ERROR: SDRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 5: printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 6: printf("ERROR: SGRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 7: debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num); @@ -686,7 +689,7 @@ static void check_mem_type(unsigned long *dimm_populated, (unsigned int)dimm_num); printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; } } @@ -696,7 +699,7 @@ static void check_mem_type(unsigned long *dimm_populated, && (dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) { printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n"); - HANG(); + spd_ddr_init_hang (); } } } @@ -771,7 +774,7 @@ static void check_frequency(unsigned long *dimm_populated, (unsigned int)(calc_cycle_time*10)); printf("Replace the DIMM, or change DDR frequency via " "strapping bits.\n\n"); - HANG(); + spd_ddr_init_hang (); } } } @@ -803,7 +806,7 @@ static void check_rank_number(unsigned long *dimm_populated, "slot %d is not supported.\n", dimm_rank, dimm_num); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } else total_rank += dimm_rank; } @@ -812,7 +815,7 @@ static void check_rank_number(unsigned long *dimm_populated, "for all slots.\n", (unsigned int)total_rank); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Remove one of the DIMM modules.\n\n"); - HANG(); + spd_ddr_init_hang (); } } } @@ -837,28 +840,28 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("This DIMM is 5.0 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x01: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is LVTTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x02: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 1.5 Volt.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x03: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 3.3 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x04: /* 2.5 Voltage only for DDR1 */ @@ -870,7 +873,7 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; } } @@ -1013,13 +1016,13 @@ static void program_copt1(unsigned long *dimm_populated, if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) { if (buf0 != buf1) { printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n"); - HANG(); + spd_ddr_init_hang (); } } if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) { printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); - HANG(); + spd_ddr_init_hang (); } else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) { mcopt1 |= SDRAM_MCOPT1_DMWD_64; @@ -1027,7 +1030,7 @@ static void program_copt1(unsigned long *dimm_populated, mcopt1 |= SDRAM_MCOPT1_DMWD_32; } else { printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); - HANG(); + spd_ddr_init_hang (); } if (ecc_enabled == TRUE) @@ -1216,7 +1219,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: ucode error on selected_cas value %d", selected_cas); - HANG(); + spd_ddr_init_hang (); break; } @@ -1248,7 +1251,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: write recovery not support (%d)", write_recovery); - HANG(); + spd_ddr_init_hang (); break; } #else @@ -1266,7 +1269,7 @@ static void program_initplr(unsigned long *dimm_populated, ods = ODS_REDUCED; } else { printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm); - HANG(); + spd_ddr_init_hang (); } mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas; @@ -1291,7 +1294,7 @@ static void program_initplr(unsigned long *dimm_populated, mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */ } else { printf("ERROR: ucode error as unknown DDR type in program_initplr"); - HANG(); + spd_ddr_init_hang (); } } @@ -1396,7 +1399,7 @@ static void program_mode(unsigned long *dimm_populated, } else { printf("ERROR: SPD reported Tcyc is incorrect for DIMM " "in slot %d\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); } } else { /* Convert from hex to decimal */ @@ -1533,7 +1536,7 @@ static void program_mode(unsigned long *dimm_populated, printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); - HANG(); + spd_ddr_init_hang (); } } else { /* DDR2 */ debug("cas_3_0_available=%d\n", cas_3_0_available); @@ -1556,7 +1559,7 @@ static void program_mode(unsigned long *dimm_populated, cas_3_0_available, cas_4_0_available, cas_5_0_available); printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n", sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); - HANG(); + spd_ddr_init_hang (); } } @@ -1665,7 +1668,7 @@ static void program_rtr(unsigned long *dimm_populated, printf("ERROR: DIMM %d unsupported refresh rate/type.\n", (unsigned int)dimm_num); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; } @@ -2073,7 +2076,7 @@ static void program_bxcf(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", (unsigned int)num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } } @@ -2155,7 +2158,7 @@ static void program_memory_queue(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", (unsigned int)rank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) @@ -2700,7 +2703,7 @@ calibration_loop: printf("\nERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); - HANG(); + spd_ddr_init_hang (); } blank_string(strlen(str)); @@ -2856,7 +2859,7 @@ static void test(void) if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); - HANG(); + spd_ddr_init_hang (); } /*------------------------------------------------------------------ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index d471808821..c2b5cb8f9f 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -125,7 +125,6 @@ #undef CONFIG_DDR_ECC /* don't use ECC */ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB 1 -#define CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG 1 /*----------------------------------------------------------------------- * I2C