From: Vagrant Cascadian Date: Tue, 15 Mar 2016 19:16:39 +0000 (-0700) Subject: Fix spelling of "transferred". X-Git-Tag: v2016.05-rc1~216 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a6f70a3d1456e6ce97e0f00ac2d5ff8ae22027d6;p=u-boot Fix spelling of "transferred". Signed-off-by: Vagrant Cascadian Acked-by: Marek Vasut Reviewed-by: Simon Glass Reviewed-by: Tom Rini --- diff --git a/arch/powerpc/cpu/mpc8xx/spi.c b/arch/powerpc/cpu/mpc8xx/spi.c index c442af979d..6267c0e204 100644 --- a/arch/powerpc/cpu/mpc8xx/spi.c +++ b/arch/powerpc/cpu/mpc8xx/spi.c @@ -455,7 +455,7 @@ ssize_t spi_xfer (size_t count) * * The Serial Peripheral Interface (SPI) is tested in the local loopback mode. * The interface is configured accordingly and several packets - * are transfered. The configurable test parameters are: + * are transferred. The configurable test parameters are: * TEST_MIN_LENGTH - minimum size of packet to transfer * TEST_MAX_LENGTH - maximum size of packet to transfer * TEST_NUM - number of tests diff --git a/arch/sparc/cpu/leon3/usb_uhci.c b/arch/sparc/cpu/leon3/usb_uhci.c index 242b83fbcf..67bd1241bd 100644 --- a/arch/sparc/cpu/leon3/usb_uhci.c +++ b/arch/sparc/cpu/leon3/usb_uhci.c @@ -55,7 +55,7 @@ * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They * will be inserted after the appropriate (depending the interval setting) skeleton TD. * If an interrupt has been detected the dev->irqhandler is called. The status and number - * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the + * of transferred bytes is stored in dev->irq_status resp. dev->irq_act_len. If the * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned, * the interrupt TD will be reactivated. * @@ -229,7 +229,7 @@ unsigned long usb_uhci_td_stat(unsigned long status) return result; } -/* get the status and the transfered len of a td chain. +/* get the status and the transferred len of a td chain. * called from the completion handler */ int usb_get_td_status(uhci_td_t * td, struct usb_device *dev) @@ -247,7 +247,7 @@ int usb_get_td_status(uhci_td_t * td, struct usb_device *dev) stat = usb_uhci_td_stat(temp); info = swap_32((unsigned long)READ32(&mytd->info)); if (((info & 0xff) != USB_PID_SETUP) && (((info >> 21) & 0x7ff) != 0x7ff) && (temp & 0x7FF) != 0x7ff) { /* if not setup and not null data pack */ - dev->act_len += (temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */ + dev->act_len += (temp & 0x7FF) + 1; /* the transferred len is act_len + 1 */ } if (stat) { /* status no ok */ dev->status = stat; @@ -621,7 +621,7 @@ void usb_check_int_chain(void) if ((td->dev_ptr != 0L) && !(status & TD_CTRL_ACTIVE)) { /* td is not active and a device is assigned -> call irqhandler */ dev = (struct usb_device *)td->dev_ptr; - dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */ + dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1; /* transferred length */ dev->irq_status = usb_uhci_td_stat(status); /* get status */ res = dev->irq_handle(dev); /* call irqhandler */ if (res == 1) { diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c index 5590be1962..8399407631 100644 --- a/board/mpl/common/usb_uhci.c +++ b/board/mpl/common/usb_uhci.c @@ -52,7 +52,7 @@ * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They * will be inserted after the appropriate (depending the interval setting) skeleton TD. * If an interrupt has been detected the dev->irqhandler is called. The status and number - * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the + * of transferred bytes is stored in dev->irq_status resp. dev->irq_act_len. If the * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned, * the interrupt TD will be reactivated. * @@ -156,7 +156,7 @@ unsigned long usb_uhci_td_stat(unsigned long status) return result; } -/* get the status and the transfered len of a td chain. +/* get the status and the transferred len of a td chain. * called from the completion handler */ int usb_get_td_status(uhci_td_t *td,struct usb_device *dev) @@ -177,7 +177,7 @@ int usb_get_td_status(uhci_td_t *td,struct usb_device *dev) (((info >> 21) & 0x7ff)!= 0x7ff) && (temp & 0x7FF)!=0x7ff) { /* if not setup and not null data pack */ - dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */ + dev->act_len+=(temp & 0x7FF) + 1; /* the transferred len is act_len + 1 */ } if(stat) { /* status no ok */ dev->status=stat; @@ -533,7 +533,7 @@ void usb_check_int_chain(void) if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) { /* td is not active and a device is assigned -> call irqhandler */ dev=(struct usb_device *)td->dev_ptr; - dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */ + dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transferred length */ dev->irq_status=usb_uhci_td_stat(status); /* get status */ res=dev->irq_handle(dev); /* call irqhandler */ if(res==1) { diff --git a/cmd/fdc.c b/cmd/fdc.c index 5766b5650b..058ae89a38 100644 --- a/cmd/fdc.c +++ b/cmd/fdc.c @@ -459,7 +459,7 @@ retryrw: break; } if((c&0xC0)==0x80) { /* output */ - PRINTF("Transfer error transfered: at %ld, MSR=%02X\n",i,c); + PRINTF("Transfer error transferred: at %ld, MSR=%02X\n",i,c); if(i>6) { for(ii=0;ii<7;ii++) { pCMD->result[ii]=bufferw[(i-7+ii)]; diff --git a/common/usb.c b/common/usb.c index 45a5a0f9c7..4d0de4d87e 100644 --- a/common/usb.c +++ b/common/usb.c @@ -210,7 +210,7 @@ int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, * clear keyboards LEDs). For data transfers, (storage transfers) we don't * allow control messages with 0 timeout, by previousely resetting the flag * asynch_allowed (usb_disable_asynch(1)). - * returns the transfered length if OK or -1 if error. The transfered length + * returns the transferred length if OK or -1 if error. The transferred length * and the current status are stored in the dev->act_len and dev->status. */ int usb_control_msg(struct usb_device *dev, unsigned int pipe, diff --git a/common/usb_storage.c b/common/usb_storage.c index 14728242f0..83c8607cf4 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -697,7 +697,7 @@ static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) us->ip_wanted = 0; return USB_STOR_TRANSPORT_ERROR; } - debug("Got interrupt data 0x%x, transfered %d status 0x%lX\n", + debug("Got interrupt data 0x%x, transferred %d status 0x%lX\n", us->ip_data, us->pusb_dev->irq_act_len, us->pusb_dev->irq_status); /* UFI gives us ASC and ASCQ, like a request sense */ diff --git a/doc/README.POST b/doc/README.POST index 6815d491cf..a9335f4d8b 100644 --- a/doc/README.POST +++ b/doc/README.POST @@ -494,7 +494,7 @@ This test will verify the following ALU instructions: This group will contain: b, bl, bc. The first 2 instructions (b, bl) will be verified by jumping to - a fixed address and checking whether control was transfered to + a fixed address and checking whether control was transferred to that very point. For the bl instruction the value of the link register will be checked as well (using mfspr). To verify the bc instruction various combinations of the BI/BO fields, the CTR diff --git a/doc/device-tree-bindings/spi/spi-bus.txt b/doc/device-tree-bindings/spi/spi-bus.txt index 5c8720a820..420ec9529f 100644 --- a/doc/device-tree-bindings/spi/spi-bus.txt +++ b/doc/device-tree-bindings/spi/spi-bus.txt @@ -63,7 +63,7 @@ contain the following properties. a header byte before reading data from the slave. Some SPI controllers and devices support Dual and Quad SPI transfer mode. -It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD). +It allows data in SPI system transferred in 2 wires(DUAL) or 4 wires(QUAD). Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is only 1(SINGLE), 2(DUAL) and 4(QUAD). Dual/Quad mode is not allowed when 3-wire mode is used. diff --git a/doc/kwboot.1 b/doc/kwboot.1 index 25fe69aa5c..1e9ca268f7 100644 --- a/doc/kwboot.1 +++ b/doc/kwboot.1 @@ -20,7 +20,7 @@ must conform to Marvell's BootROM firmware image format Following power-up or a system reset, system BootROM code polls the UART for a brief period of time, sensing a handshake message which initiates an image upload. This program sends this boot message until -it receives a positive acknowledgement. The image is transfered using +it receives a positive acknowledgement. The image is transferred using Xmodem. Additionally, this program implements a minimal terminal mode, which diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c index 6f1ac85723..c7c40affae 100644 --- a/drivers/block/sym53c8xx.c +++ b/drivers/block/sym53c8xx.c @@ -657,7 +657,7 @@ void scsi_issue(ccb *pccb) /* struct pccb must be set-up correctly */ retrycnt=0; PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]); - pccb->trans_bytes=0; /* no bytes transfered yet */ + pccb->trans_bytes=0; /* no bytes transferred yet */ scsi_set_script(pccb); /* fill in SCRIPT */ scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */ script_int_mask=0xff; /* enable all Ints */ @@ -712,7 +712,7 @@ retry: for(i=0;i<3;i++) int_stat[i]=0; /* delete all int status */ retrycnt++; - PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n", + PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transferred %lx\n", pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes); scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */ goto retry; diff --git a/drivers/fpga/stratixII.c b/drivers/fpga/stratixII.c index 820d016a11..da9c14a568 100644 --- a/drivers/fpga/stratixII.c +++ b/drivers/fpga/stratixII.c @@ -130,7 +130,7 @@ int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize, /* 3.1 check stratix has not signaled us an error */ if (fns->status (cookie) != 1) { printf - ("\n%s(%d) Stratix failed (byte transfered till failure 0x%x)\n", + ("\n%s(%d) Stratix failed (byte transferred till failure 0x%x)\n", __FUNCTION__, __LINE__, bytecount); fns->abort (cookie); return FPGA_FAIL; diff --git a/include/usb.h b/include/usb.h index 19411258ec..5adad36838 100644 --- a/include/usb.h +++ b/include/usb.h @@ -130,7 +130,7 @@ struct usb_device { int string_langid; /* language ID for strings */ int (*irq_handle)(struct usb_device *dev); unsigned long irq_status; - int irq_act_len; /* transfered bytes */ + int irq_act_len; /* transferred bytes */ void *privptr; /* * Child devices - if this is a hub device @@ -138,7 +138,7 @@ struct usb_device { */ unsigned long status; unsigned long int_pending; /* 1 bit per ep, used by int_queue */ - int act_len; /* transfered bytes */ + int act_len; /* transferred bytes */ int maxchild; /* Number of ports if hub */ int portnr; /* Port number, 1=first */ #ifndef CONFIG_DM_USB diff --git a/post/lib_powerpc/b.c b/post/lib_powerpc/b.c index 43b4c35307..6875204b1c 100644 --- a/post/lib_powerpc/b.c +++ b/post/lib_powerpc/b.c @@ -12,7 +12,7 @@ * Branch instructions: b, bl, bc * * The first 2 instructions (b, bl) are verified by jumping - * to a fixed address and checking whether control was transfered + * to a fixed address and checking whether control was transferred * to that very point. For the bl instruction the value of the * link register is checked as well (using mfspr). * To verify the bc instruction various combinations of the BI/BO