From: Øyvind Harboe <oyvind.harboe@zylin.com>
Date: Thu, 12 Aug 2010 13:01:23 +0000 (+0200)
Subject: at91cap7a-stk-sdram.cfg: faster reset
X-Git-Tag: v0.5.0-rc1~452
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a72faf6405234d2b46e293edfffc7a00d21c7fc8;p=openocd

at91cap7a-stk-sdram.cfg: faster reset

crank up JTAG speed as soon as clocks are set up.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
---

diff --git a/tcl/board/at91cap7a-stk-sdram.cfg b/tcl/board/at91cap7a-stk-sdram.cfg
index cca12119..72d9e018 100644
--- a/tcl/board/at91cap7a-stk-sdram.cfg
+++ b/tcl/board/at91cap7a-stk-sdram.cfg
@@ -28,7 +28,7 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 
 $_TARGETNAME configure -event reset-start {
 	# start off real slow when we're running off internal RC oscillator
-	jtag_khz 10
+	jtag_khz 32
 }
 
 proc peek32 {address} {
@@ -76,6 +76,10 @@ $_TARGETNAME configure -event reset-init {
 	wait_state {expr {([peek32 0xFFFFFC68] & 0x8) == 0}}  
 
 	echo "Master clock ok."
+	
+	# Now that we're up and running, crank up speed!
+	global post_reset_khz ;	jtag_khz $post_reset_khz
+	
 	echo "Configuring the SDRAM controller..."
 
 	# Configure EBI Chip select for SDRAM
@@ -149,10 +153,6 @@ $_TARGETNAME configure -event reset-init {
 	mww 0xffffef00 0x3
 	
 	echo "SDRAM configuration ok."
-
-	# Now that we're up and running, crank up speed!
-	global post_reset_khz
-	jtag_khz $post_reset_khz
 }
 
 $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0