From: Tom Rini Date: Mon, 30 Jul 2012 18:49:47 +0000 (-0700) Subject: am33xx: Correct and clean up ddr_regs struct X-Git-Tag: v2012.10-rc1~306 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a74f0c7cb505d3e2184bfd2ab42c3a6e45a1d54a;p=u-boot am33xx: Correct and clean up ddr_regs struct The ddr_regs struct was incorrectly offset after the dt0wiratio0 entry. Correct this by documenting a missing register that will be used at some point in the future (when write leveling is supported). Further, the cmdNcs{force,delay} fields are undocumented and we have been setting them to zero, remove. Next, setting of the 'DATAn_REG_PHY_USE_RANK0_DELAYS field belongs with the rest of the ddr_data entries, so program it there. Finally, comment on how we are configuring the DATA1 registers that correspond to the DATA0 (dt0) registers defined in the struct. Signed-off-by: Tom Rini --- diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index 59ca51f59d..bceed8150d 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -77,20 +77,14 @@ void config_ddr_phy(const struct emif_regs *regs) void config_cmd_ctrl(const struct cmd_control *cmd) { writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio); - writel(cmd->cmd0csforce, &ddr_reg[0]->cm0csforce); - writel(cmd->cmd0csdelay, &ddr_reg[0]->cm0csdelay); writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff); writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout); writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio); - writel(cmd->cmd1csforce, &ddr_reg[0]->cm1csforce); - writel(cmd->cmd1csdelay, &ddr_reg[0]->cm1csdelay); writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff); writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout); writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio); - writel(cmd->cmd2csforce, &ddr_reg[0]->cm2csforce); - writel(cmd->cmd2csdelay, &ddr_reg[0]->cm2csdelay); writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff); writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout); } @@ -106,6 +100,7 @@ void config_ddr_data(int macrono, const struct ddr_data *data) writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0); writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0); writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0); + writel(data->datauserank0delay, &ddr_reg[macrono]->dt0rdelays0); writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0); } diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index ace3d26eac..3bb91d3c90 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -61,25 +61,20 @@ static const struct ddr_data ddr2_data = { |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)), .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)), + .datauserank0delay = DDR2_PHY_RANK0_DELAY, .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct cmd_control ddr2_cmd_ctrl_data = { .cmd0csratio = DDR2_RATIO, - .cmd0csforce = CMD_FORCE, - .cmd0csdelay = CMD_DELAY, .cmd0dldiff = DDR2_DLL_LOCK_DIFF, .cmd0iclkout = DDR2_INVERT_CLKOUT, .cmd1csratio = DDR2_RATIO, - .cmd1csforce = CMD_FORCE, - .cmd1csdelay = CMD_DELAY, .cmd1dldiff = DDR2_DLL_LOCK_DIFF, .cmd1iclkout = DDR2_INVERT_CLKOUT, .cmd2csratio = DDR2_RATIO, - .cmd2csforce = CMD_FORCE, - .cmd2csdelay = CMD_DELAY, .cmd2dldiff = DDR2_DLL_LOCK_DIFF, .cmd2iclkout = DDR2_INVERT_CLKOUT, }; @@ -121,9 +116,6 @@ void config_ddr(short ddr_type) config_ddr_data(0, &ddr2_data); config_ddr_data(1, &ddr2_data); - writel(DDR2_PHY_RANK0_DELAY, &ddrregs->dt0rdelays0); - writel(DDR2_PHY_RANK0_DELAY, &ddrregs->dt1rdelays0); - config_io_ctrl(DDR2_IOCTRL_VALUE); /* Set CKE to be controlled by EMIF/DDR PHY */ diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index b37b161df3..0526863693 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -26,8 +26,6 @@ #define VTP_CTRL_READY (0x1 << 5) #define VTP_CTRL_ENABLE (0x1 << 6) #define VTP_CTRL_START_EN (0x1) -#define CMD_FORCE 0x00 -#define CMD_DELAY 0x00 #define PHY_DLL_LOCK_DIFF 0x0 #define DDR_CKE_CTRL_NORMAL 0x1 @@ -66,43 +64,43 @@ void config_ddr_phy(const struct emif_regs *regs); /** * This structure represents the DDR registers on AM33XX devices. + * We make use of DDR_PHY_BASE_ADDR2 to address the DATA1 registers that + * correspond to DATA1 registers defined here. */ struct ddr_regs { unsigned int resv0[7]; unsigned int cm0csratio; /* offset 0x01C */ - unsigned int cm0csforce; /* offset 0x020 */ - unsigned int cm0csdelay; /* offset 0x024 */ + unsigned int resv1[2]; unsigned int cm0dldiff; /* offset 0x028 */ unsigned int cm0iclkout; /* offset 0x02C */ - unsigned int resv1[8]; + unsigned int resv2[8]; unsigned int cm1csratio; /* offset 0x050 */ - unsigned int cm1csforce; /* offset 0x054 */ - unsigned int cm1csdelay; /* offset 0x058 */ + unsigned int resv3[2]; unsigned int cm1dldiff; /* offset 0x05C */ unsigned int cm1iclkout; /* offset 0x060 */ - unsigned int resv2[8]; + unsigned int resv4[8]; unsigned int cm2csratio; /* offset 0x084 */ - unsigned int cm2csforce; /* offset 0x088 */ - unsigned int cm2csdelay; /* offset 0x08C */ + unsigned int resv5[2]; unsigned int cm2dldiff; /* offset 0x090 */ unsigned int cm2iclkout; /* offset 0x094 */ - unsigned int resv3[12]; + unsigned int resv6[12]; unsigned int dt0rdsratio0; /* offset 0x0C8 */ - unsigned int resv4[4]; + unsigned int resv7[4]; unsigned int dt0wdsratio0; /* offset 0x0DC */ - unsigned int resv5[4]; + unsigned int resv8[4]; unsigned int dt0wiratio0; /* offset 0x0F0 */ - unsigned int resv6; + unsigned int resv9; + unsigned int dt0wimode0; /* offset 0x0F8 */ unsigned int dt0giratio0; /* offset 0x0FC */ - unsigned int resv7[2]; + unsigned int resv10; + unsigned int dt0gimode0; /* offset 0x104 */ unsigned int dt0fwsratio0; /* offset 0x108 */ - unsigned int resv8[5]; + unsigned int resv11[4]; + unsigned int dt0dqoffset; /* offset 0x11C */ unsigned int dt0wrsratio0; /* offset 0x120 */ - unsigned int resv9[4]; + unsigned int resv12[4]; unsigned int dt0rdelays0; /* offset 0x134 */ unsigned int dt0dldiff0; /* offset 0x138 */ - unsigned int resv10[39]; - unsigned int dt1rdelays0; /* offset 0x1D8 */ }; /** @@ -136,6 +134,7 @@ struct ddr_data { unsigned long datagiratio0; unsigned long datafwsratio0; unsigned long datawrsratio0; + unsigned long datauserank0delay; unsigned long datadldiff0; };