From: Dmitry Lifshitz Date: Sun, 27 Apr 2014 10:18:46 +0000 (+0300) Subject: cm-t54: add EEPROM support and MAC address handling X-Git-Tag: v2014.07-rc2~2^2^2~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=a9375f3328135d651d7500df3e4c43432e5db133;p=u-boot cm-t54: add EEPROM support and MAC address handling cm-t54 Eth MAC address is stored in onboard EEPROM. Add EEPROM support and setup stored Eth MAC address. If EEPROM does not contain a valid MAC, then generate it from the processor ID code (reference code is taken from OMAP5 uEvm board file). Modify Device Tree blob MAC address field with retrieved data. Signed-off-by: Dmitry Lifshitz Acked-by: Igor Grinberg --- diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c index e0df47e72b..6b18b93e91 100644 --- a/board/compulab/cm_t54/cm_t54.c +++ b/board/compulab/cm_t54/cm_t54.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -20,6 +21,8 @@ #include #include +#include "../common/eeprom.h" + #define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) #define DIE_ID_REG_OFFSET 0x200 @@ -99,6 +102,66 @@ int board_mmc_init(bd_t *bis) } #endif +#ifdef CONFIG_USB_HOST_ETHER + +void ft_board_setup(void *blob, bd_t *bd) +{ + uint8_t enetaddr[6]; + + /* MAC addr */ + if (eth_getenv_enetaddr("usbethaddr", enetaddr)) { + fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address", + enetaddr, 6, 1); + } +} + +static void generate_mac_addr(uint8_t *enetaddr) +{ + int reg; + + reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; + + /* + * create a fake MAC address from the processor ID code. + * first byte is 0x02 to signify locally administered. + */ + enetaddr[0] = 0x02; + enetaddr[1] = readl(reg + 0x10) & 0xff; + enetaddr[2] = readl(reg + 0xC) & 0xff; + enetaddr[3] = readl(reg + 0x8) & 0xff; + enetaddr[4] = readl(reg) & 0xff; + enetaddr[5] = (readl(reg) >> 8) & 0xff; +} + +/* + * Routine: handle_mac_address + * Description: prepare MAC address for on-board Ethernet. + */ +static int handle_mac_address(void) +{ + uint8_t enetaddr[6]; + int ret; + + ret = eth_getenv_enetaddr("usbethaddr", enetaddr); + if (ret) + return 0; + + ret = cl_eeprom_read_mac_addr(enetaddr); + if (!ret || !is_valid_ether_addr(enetaddr)) + generate_mac_addr(enetaddr); + + if (!is_valid_ether_addr(enetaddr)) + return -1; + + return eth_setenv_enetaddr("usbethaddr", enetaddr); +} + +int board_eth_init(bd_t *bis) +{ + return handle_mac_address(); +} +#endif + #ifdef CONFIG_USB_EHCI static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index 4dcac4004e..5e805c4019 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -19,6 +19,15 @@ #undef CONFIG_MISC_INIT_R #undef CONFIG_SPL_OS_BOOT +/* Device Tree defines */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP + +/* EEPROM related defines */ +#define CONFIG_SYS_I2C_OMAP34XX +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + /* Enable SD/MMC CD and WP GPIOs */ #define OMAP_HSMMC_USE_GPIO