From: Abbas Raza <Abbas_Raza@mentor.com>
Date: Mon, 25 Mar 2013 09:13:34 +0000 (+0000)
Subject: mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board
X-Git-Tag: v2013.04-rc3~1^2~77^2~7
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=aad4659a2fde4b69e8124d6fe8b57bf28d3c747d;p=u-boot

mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board

Maximum bus width supported by some i.MX6 boards is not 8bit like
others. In case where both host controller and card support 8bit transfers,
they agree to communicate on 8bit interface while some boards support only 4bit interface.
Due to this reason the mmc 8bit default mode fails on these boards. To rectify this,
define maximum bus width supported by these boards (4bit). If max_bus_width is not
defined, it is 0 by default and 8bit width support will be enabled in host
capabilities otherwise host capabilities are modified accordingly.

It is tested with a MMCplus card.

Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com>
cc: stefano Babic <sbabic@denx.de>
cc: Andy Fleming <afleming@gmail.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
---

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 229c237839..e5b7795c5b 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -304,6 +304,9 @@ int board_mmc_init(bd_t *bis)
 	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 
+	usdhc_cfg[0].max_bus_width = 4;
+	usdhc_cfg[1].max_bus_width = 4;
+
 	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
 		switch (index) {
 		case 0:
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 5b69a6d2de..0e25613f19 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -274,6 +274,9 @@ int board_mmc_init(bd_t *bis)
 	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 
+	usdhc_cfg[0].max_bus_width = 4;
+	usdhc_cfg[1].max_bus_width = 4;
+
 	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
 		switch (index) {
 		case 0:
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index d95189f77d..8d071e1fe1 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -105,6 +105,8 @@ int board_mmc_init(bd_t *bis)
 	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 
 	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	usdhc_cfg[0].max_bus_width = 4;
+
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
 
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 54b5363169..35f879ea6e 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -580,6 +580,13 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
 
 	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC;
 
+	if (cfg->max_bus_width > 0) {
+		if (cfg->max_bus_width < 8)
+			mmc->host_caps &= ~MMC_MODE_8BIT;
+		if (cfg->max_bus_width < 4)
+			mmc->host_caps &= ~MMC_MODE_4BIT;
+	}
+
 	if (caps & ESDHC_HOSTCAPBLT_HSS)
 		mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 47d2fe4f18..0a1a0715e9 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -168,6 +168,7 @@
 struct fsl_esdhc_cfg {
 	u32	esdhc_base;
 	u32	sdhc_clk;
+	u8	max_bus_width;
 };
 
 /* Select the correct accessors depending on endianess */