From: John Rigby Date: Mon, 27 Dec 2010 14:33:10 +0000 (+0000) Subject: OMAP[34]: fix broken timer X-Git-Tag: v2011.09-rc1~285 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=aadcfc179a5f9ef61c8201da9dff34f8394c1054;p=u-boot OMAP[34]: fix broken timer As implemented now the timer used to implement __udelay counts to 0xffffffff and then gets stuck there because the the programmed reload value is 0xffffffff. This value is not only wrong but illegal according to the reference manual. One can reproduce the bug by leaving a board at the u-boot prompt for sometime then issuing a sleep command. The sleep will hang forever. The timer is a count up timer that reloads as it rolls over from 0xffffffff so the correct load value is 0. Change TIMER_LOAD_VAL from 0xffffffff to 0 and introduce a new constant called TIMER_OVERFLOW_VAL set to 0xffffffff. Signed-off-by: John Rigby Tested-by: Igor Grinberg --- diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 9beebb1e74..59bbca84a6 100644 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -43,8 +43,9 @@ static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; * Nothing really to do with interrupts, just starts up a counter. */ -#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV)) -#define TIMER_LOAD_VAL 0xffffffff +#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV)) +#define TIMER_OVERFLOW_VAL 0xffffffff +#define TIMER_LOAD_VAL 0 int timer_init(void) { @@ -86,7 +87,7 @@ void __udelay(unsigned long usec) while (tmo > 0) { now = readl(&timer_base->tcrr); if (last > now) /* count up timer overflow */ - tmo -= TIMER_LOAD_VAL - last + now; + tmo -= TIMER_OVERFLOW_VAL - last + now + 1; else tmo -= now - last; last = now;