From: Simon Glass Date: Tue, 18 Oct 2016 02:12:48 +0000 (-0600) Subject: video: Drop the sed13806 driver X-Git-Tag: v2016.11-rc3~67 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ac8a32ff1dd68bd394a0963328a89b72c0f828f1;p=u-boot video: Drop the sed13806 driver This is not used in U-Boot. Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- diff --git a/README b/README index 8925837e23..f585705209 100644 --- a/README +++ b/README @@ -1614,11 +1614,6 @@ CBFS (Coreboot Filesystem) support instead. - Video support: - CONFIG_VIDEO_SED13806 - Enable Epson SED13806 driver. This driver supports 8bpp - and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP - or CONFIG_VIDEO_SED13806_16BPP - CONFIG_FSL_DIU_FB Enable the Freescale DIU video driver. Reference boards for SOCs that have a DIU should define this macro to enable DIU diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 2d5f607f4b..db34904a9a 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -50,7 +50,6 @@ obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o -obj-$(CONFIG_VIDEO_SED13806) += sed13806.o obj-$(CONFIG_VIDEO_SM501) += sm501.o obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o videomodes.o obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index aca4444152..ac7c40298b 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -95,15 +95,6 @@ #define VIDEO_HW_BITBLT #endif -/* - * Defines for the SED13806 driver - */ -#ifdef CONFIG_VIDEO_SED13806 -#define VIDEO_FB_LITTLE_ENDIAN -#define VIDEO_HW_RECTFILL -#define VIDEO_HW_BITBLT -#endif - #if defined(CONFIG_VIDEO_MXS) #define VIDEO_FB_16BPP_WORD_SWAP #endif diff --git a/drivers/video/sed13806.c b/drivers/video/sed13806.c deleted file mode 100644 index cd7fac6f97..0000000000 --- a/drivers/video/sed13806.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * (C) Copyright 2002 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* Video support for Epson SED13806 chipset */ - -#include - -#include -#include - -#define readByte(ptrReg) \ - *(volatile unsigned char *)(sed13806.isaBase + ptrReg) - -#define writeByte(ptrReg,value) \ - *(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value - -#define writeWord(ptrReg,value) \ - (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00)) - -GraphicDevice sed13806; - -/*----------------------------------------------------------------------------- - * EpsonSetRegs -- - *----------------------------------------------------------------------------- - */ -static void EpsonSetRegs (void) -{ - /* the content of the chipset register depends on the board (clocks, ...)*/ - const S1D_REGS *preg = board_get_regs (); - while (preg -> Index) { - writeByte (preg -> Index, preg -> Value); - preg ++; - } -} - -/*----------------------------------------------------------------------------- - * video_hw_init -- - *----------------------------------------------------------------------------- - */ -void *video_hw_init (void) -{ - unsigned int *vm, i; - - memset (&sed13806, 0, sizeof (GraphicDevice)); - - /* Initialization of the access to the graphic chipset - Retreive base address of the chipset - (see board/RPXClassic/eccx.c) */ - if ((sed13806.isaBase = board_video_init ()) == 0) { - return (NULL); - } - - sed13806.frameAdrs = sed13806.isaBase + FRAME_BUFFER_OFFSET; - sed13806.winSizeX = board_get_width (); - sed13806.winSizeY = board_get_height (); - -#if defined(CONFIG_VIDEO_SED13806_8BPP) - sed13806.gdfIndex = GDF__8BIT_INDEX; - sed13806.gdfBytesPP = 1; - -#elif defined(CONFIG_VIDEO_SED13806_16BPP) - sed13806.gdfIndex = GDF_16BIT_565RGB; - sed13806.gdfBytesPP = 2; - -#else -#error Unsupported SED13806 BPP -#endif - - sed13806.memSize = sed13806.winSizeX * sed13806.winSizeY * sed13806.gdfBytesPP; - - /* Load SED registers */ - EpsonSetRegs (); - - /* (see board/RPXClassic/RPXClassic.c) */ - board_validate_screen (sed13806.isaBase); - - /* Clear video memory */ - i = sed13806.memSize/4; - vm = (unsigned int *)sed13806.frameAdrs; - while(i--) - *vm++ = 0; - - - return (&sed13806); -} -/*----------------------------------------------------------------------------- - * Epson_wait_idle -- Wait for hardware to become idle - *----------------------------------------------------------------------------- - */ -static void Epson_wait_idle (void) -{ - while (readByte (BLT_CTRL0) & 0x80); - - /* Read a word in the BitBLT memory area to shutdown the BitBLT engine */ - *(volatile unsigned short *)(sed13806.isaBase + BLT_REG); -} - -/*----------------------------------------------------------------------------- - * video_hw_bitblt -- - *----------------------------------------------------------------------------- - */ -void video_hw_bitblt ( - unsigned int bpp, /* bytes per pixel */ - unsigned int src_x, /* source pos x */ - unsigned int src_y, /* source pos y */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y /* frame height */ - ) -{ - register GraphicDevice *pGD = (GraphicDevice *)&sed13806; - unsigned long srcAddr, dstAddr; - unsigned int stride = bpp * pGD -> winSizeX; - - srcAddr = (src_y * stride) + (src_x * bpp); - dstAddr = (dst_y * stride) + (dst_x * bpp); - - Epson_wait_idle (); - - writeByte(BLT_ROP,0x0C); /* source */ - writeByte(BLT_OP,0x02);/* move blit in positive direction with ROP */ - writeWord(BLT_MEM_OFF0, stride / 2); - if (pGD -> gdfIndex == GDF__8BIT_INDEX) { - writeByte(BLT_CTRL1,0x00); - } - else { - writeByte(BLT_CTRL1,0x01); - } - - writeWord(BLT_WIDTH0,(dim_x - 1)); - writeWord(BLT_HEIGHT0,(dim_y - 1)); - - /* set up blit registers */ - writeByte(BLT_SRC_ADDR0,srcAddr); - writeByte(BLT_SRC_ADDR1,srcAddr>>8); - writeByte(BLT_SRC_ADDR2,srcAddr>>16); - - writeByte(BLT_DST_ADDR0,dstAddr); - writeByte(BLT_DST_ADDR1,dstAddr>>8); - writeByte(BLT_DST_ADDR2,dstAddr>>16); - - /* Engage the blt engine */ - /* rectangular region for src and dst */ - writeByte(BLT_CTRL0,0x80); - - /* wait untill current blits finished */ - Epson_wait_idle (); -} -/*----------------------------------------------------------------------------- - * video_hw_rectfill -- - *----------------------------------------------------------------------------- - */ -void video_hw_rectfill ( - unsigned int bpp, /* bytes per pixel */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y, /* frame height */ - unsigned int color /* fill color */ - ) -{ - register GraphicDevice *pGD = (GraphicDevice *)&sed13806; - unsigned long dstAddr; - unsigned int stride = bpp * pGD -> winSizeX; - - dstAddr = (dst_y * stride) + (dst_x * bpp); - - Epson_wait_idle (); - - /* set up blit registers */ - writeByte(BLT_DST_ADDR0,dstAddr); - writeByte(BLT_DST_ADDR1,dstAddr>>8); - writeByte(BLT_DST_ADDR2,dstAddr>>16); - - writeWord(BLT_WIDTH0,(dim_x - 1)); - writeWord(BLT_HEIGHT0,(dim_y - 1)); - writeWord(BLT_FGCOLOR0,color); - - writeByte(BLT_OP,0x0C); /* solid fill */ - writeWord(BLT_MEM_OFF0,stride / 2); - - if (pGD -> gdfIndex == GDF__8BIT_INDEX) { - writeByte(BLT_CTRL1,0x00); - } - else { - writeByte(BLT_CTRL1,0x01); - } - - /* Engage the blt engine */ - /* rectangular region for src and dst */ - writeByte(BLT_CTRL0,0x80); - - /* wait untill current blits finished */ - Epson_wait_idle (); -} - -/*----------------------------------------------------------------------------- - * video_set_lut -- - *----------------------------------------------------------------------------- - */ -void video_set_lut ( - unsigned int index, /* color number */ - unsigned char r, /* red */ - unsigned char g, /* green */ - unsigned char b /* blue */ - ) -{ - writeByte(REG_LUT_ADDR, index ); - writeByte(REG_LUT_DATA, r); - writeByte(REG_LUT_DATA, g); - writeByte(REG_LUT_DATA, b); -} -#ifdef CONFIG_VIDEO_HW_CURSOR -/*----------------------------------------------------------------------------- - * video_set_hw_cursor -- - *----------------------------------------------------------------------------- - */ -void video_set_hw_cursor (int x, int y) -{ - writeByte (LCD_CURSOR_XL, (x & 0xff)); - writeByte (LCD_CURSOR_XM, (x >> 8)); - writeByte (LCD_CURSOR_YL, (y & 0xff)); - writeByte (LCD_CURSOR_YM, (y >> 8)); -} - -/*----------------------------------------------------------------------------- - * video_init_hw_cursor -- - *----------------------------------------------------------------------------- - */ -void video_init_hw_cursor (int font_width, int font_height) -{ - volatile unsigned char *ptr; - unsigned char pattern; - int i; - - - /* Init cursor content - Cursor size is 64x64 pixels - Start of the cursor memory depends on panel type (dual panel ...) */ - if ((i = readByte (LCD_CURSOR_START)) == 0) { - ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE); - } - else { - ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192)); - } - - /* Fill the first line and the first empty line after cursor */ - for (i = 0, pattern = 0; i < 64; i++) { - if (i < font_width) { - /* Invert background */ - pattern |= 0x3; - - } - else { - /* Background */ - pattern |= 0x2; - } - if ((i & 3) == 3) { - *ptr = pattern; - *(ptr + font_height * 16) = 0xaa; - ptr ++; - pattern = 0; - } - pattern <<= 2; - } - - /* Duplicate this line */ - for (i = 1; i < font_height; i++) { - memcpy ((void *)ptr, (void *)(ptr - 16), 16); - ptr += 16; - } - - for (; i < 64; i++) { - memcpy ((void *)(ptr + 16), (void *)ptr, 16); - ptr += 16; - } - - /* Select cursor mode */ - writeByte (LCD_CURSOR_CNTL, 1); -} -#endif diff --git a/include/sed13806.h b/include/sed13806.h deleted file mode 100644 index 1cb0b860f2..0000000000 --- a/include/sed13806.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * (C) Copyright 2002 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* Video support for Epson SED13806 chipset */ - - -#ifndef _SED13806_H_ -#define _SED13806_H_ - - -/* General definitions */ -#define FRAME_BUFFER_OFFSET 0x200000 /* Frame buffer offset */ -#define TOTAL_SPACE_SIZE 0x400000 - -#define DEFAULT_VIDEO_MEMORY_SIZE 0x140000 /* Video Memory Size */ - -#define HWCURSORSIZE 1024 /* Size of memory reserved - for HW cursor*/ - -/* Offset of chipset registers */ -#define BLT_CTRL0 (0x0100) -#define BLT_CTRL1 (0x0101) -#define BLT_ROP (0x0102) -#define BLT_OP (0x0103) -#define BLT_SRC_ADDR0 (0x0104) -#define BLT_SRC_ADDR1 (0x0105) -#define BLT_SRC_ADDR2 (0x0106) -#define BLT_DST_ADDR0 (0x0108) -#define BLT_DST_ADDR1 (0x0109) -#define BLT_DST_ADDR2 (0x010A) -#define BLT_MEM_OFF0 (0x010C) -#define BLT_MEM_OFF1 (0x010D) -#define BLT_WIDTH0 (0x0110) -#define BLT_WIDTH1 (0x0111) -#define BLT_HEIGHT0 (0x0112) -#define BLT_HEIGHT1 (0x0113) -#define BLT_BGCOLOR0 (0x0114) -#define BLT_BGCOLOR1 (0x0115) -#define BLT_FGCOLOR0 (0x0118) -#define BLT_FGCOLOR1 (0x0119) - -#define BLT_REG (0x100000) - -/* Lookup table registers */ -#define REG_LUT_ADDR 0x1e2 -#define REG_LUT_DATA 0x1e4 - -/* Cursor/Ink registers */ -#define LCD_CURSOR_CNTL (0x0070) -#define LCD_CURSOR_START (0x0071) -#define LCD_CURSOR_XL (0x0072) -#define LCD_CURSOR_XM (0x0073) -#define LCD_CURSOR_YL (0x0074) -#define LCD_CURSOR_YM (0x0075) -#define LCD_CURSOR_COL0_B (0x0076) -#define LCD_CURSOR_COL0_G (0x0077) -#define LCD_CURSOR_COL0_R (0x0078) -#define LCD_CURSOR_COL1_B (0x007A) -#define LCD_CURSOR_COL1_G (0x007B) -#define LCD_CURSOR_COL1_R (0x007C) -#define LCD_CURSOR_FIFO (0x007E) - -typedef struct -{ - unsigned short Index; - unsigned char Value; -} S1D_REGS; - - -/* Board specific functions */ -unsigned int board_video_init (void); -void board_validate_screen (unsigned int base); -const S1D_REGS *board_get_regs (void); -int board_get_width (void); -int board_get_height (void); - -#endif /* _SED13806_H_ */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 643b7482a3..767a631b92 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -8272,7 +8272,6 @@ CONFIG_VIDEO_MXS CONFIG_VIDEO_MXS_MODE_SYSTEM CONFIG_VIDEO_OMAP3 CONFIG_VIDEO_ONBOARD -CONFIG_VIDEO_SED13806 CONFIG_VIDEO_SM501 CONFIG_VIDEO_SM501_16BPP CONFIG_VIDEO_SM501_32BPP