From: Spencer Oliver Date: Tue, 6 Aug 2013 12:12:10 +0000 (+0100) Subject: cfg: add stm32 cmsis-dap compliant config X-Git-Tag: v0.8.0-rc1~132 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=acc4bb83fd1f26a677fdc2c8ccdc7a235f877d2d;p=openocd cfg: add stm32 cmsis-dap compliant config Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475 Signed-off-by: Spencer Oliver Reviewed-on: http://openocd.zylin.com/1543 Tested-by: jenkins --- diff --git a/tcl/board/stm320518_eval.cfg b/tcl/board/stm320518_eval.cfg new file mode 100644 index 00000000..6f1f3227 --- /dev/null +++ b/tcl/board/stm320518_eval.cfg @@ -0,0 +1,12 @@ +# STM320518-EVAL: This is an STM32F0 eval board with a single STM32F051R8T6 +# (64KB) chip. +# http://www.st.com/internet/evalboard/product/252994.jsp +# + +# increase working area to 8KB +set WORKAREASIZE 0x2000 + +# chip name +set CHIPNAME STM32F051R8T6 + +source [find target/stm32f0x.cfg] diff --git a/tcl/target/stm32f0x.cfg b/tcl/target/stm32f0x.cfg new file mode 100644 index 00000000..104dcb9c --- /dev/null +++ b/tcl/target/stm32f0x.cfg @@ -0,0 +1,55 @@ +# script for stm32f0x family + +# +# stm32 devices support SWD transports only. +# +source [find target/swj-dp.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME stm32f0x +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# Work-area is a space in RAM used for flash programming +# By default use 4kB +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x1000 +} + +#jtag scan chain +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + # See STM Document RM0091 + # Section 29.5.3 + set _CPUTAPID 0x0bb11477 +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +# flash size will be probed +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME + +# adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz +adapter_khz 1000 + +adapter_nsrst_delay 100 + +# if srst is not fitted use SYSRESETREQ to +# perform a soft reset +cortex_m reset_config sysresetreq diff --git a/tcl/target/stm32f1x.cfg b/tcl/target/stm32f1x.cfg index 12d33d52..f32654a5 100644 --- a/tcl/target/stm32f1x.cfg +++ b/tcl/target/stm32f1x.cfg @@ -1,5 +1,10 @@ # script for stm32f1x family +# +# stm32 devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -20,12 +25,6 @@ if { [info exists WORKAREASIZE] } { set _WORKAREASIZE 0x1000 } -# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -adapter_khz 1000 - -adapter_nsrst_delay 100 -jtag_ntrst_delay 100 - #jtag scan chain if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID @@ -34,7 +33,8 @@ if { [info exists CPUTAPID] } { # Section 26.6.3 set _CPUTAPID 0x3ba00477 } -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID if { [info exists BSTAPID] } { # FIXME this never gets used to override defaults... @@ -59,13 +59,15 @@ if { [info exists BSTAPID] } { set _BSTAPID8 0x06420041 # VL line devices, Rev A set _BSTAPID9 0x06428041 - } -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \ + +if {$using_jtag} { + jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \ -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \ -expected-id $_BSTAPID4 -expected-id $_BSTAPID5 \ -expected-id $_BSTAPID6 -expected-id $_BSTAPID7 \ -expected-id $_BSTAPID8 -expected-id $_BSTAPID9 +} set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME @@ -76,6 +78,14 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME +# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz +adapter_khz 1000 + +adapter_nsrst_delay 100 +if {$using_jtag} { + jtag_ntrst_delay 100 +} + # if srst is not fitted use SYSRESETREQ to # perform a soft reset cortex_m reset_config sysresetreq diff --git a/tcl/target/stm32f2x.cfg b/tcl/target/stm32f2x.cfg index 43a944c1..5022ef7d 100644 --- a/tcl/target/stm32f2x.cfg +++ b/tcl/target/stm32f2x.cfg @@ -1,5 +1,10 @@ # script for stm32f2x family +# +# stm32 devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -29,7 +34,9 @@ if { [info exists WORKAREASIZE] } { adapter_khz 1000 adapter_nsrst_delay 100 -jtag_ntrst_delay 100 +if {$using_jtag} { + jtag_ntrst_delay 100 +} #jtag scan chain if { [info exists CPUTAPID] } { @@ -39,7 +46,8 @@ if { [info exists CPUTAPID] } { # Section 32.6.3 - corresponds to Cortex-M3 r2p0 set _CPUTAPID 0x4ba00477 } -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID if { [info exists BSTAPID] } { set _BSTAPID $BSTAPID @@ -49,7 +57,10 @@ if { [info exists BSTAPID] } { # set _BSTAPID 0x06411041 } -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID + +if {$using_jtag} { + jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID +} set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME diff --git a/tcl/target/stm32f3x.cfg b/tcl/target/stm32f3x.cfg index d092b6c8..3d68c4bf 100644 --- a/tcl/target/stm32f3x.cfg +++ b/tcl/target/stm32f3x.cfg @@ -1,5 +1,10 @@ # script for stm32f3x family +# +# stm32 devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -29,7 +34,9 @@ if { [info exists WORKAREASIZE] } { adapter_khz 1000 adapter_nsrst_delay 100 -jtag_ntrst_delay 100 +if {$using_jtag} { + jtag_ntrst_delay 100 +} #jtag scan chain if { [info exists CPUTAPID] } { @@ -39,7 +46,8 @@ if { [info exists CPUTAPID] } { # Section 29.6.3 - corresponds to Cortex-M4 r0p1 set _CPUTAPID 0x4ba00477 } -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID if { [info exists BSTAPID] } { set _BSTAPID $BSTAPID @@ -49,7 +57,10 @@ if { [info exists BSTAPID] } { set _BSTAPID1 0x06422041 set _BSTAPID2 0x06432041 } -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 + +if {$using_jtag} { + jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 +} set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME diff --git a/tcl/target/stm32f4x.cfg b/tcl/target/stm32f4x.cfg index b5ab2004..eafa1226 100644 --- a/tcl/target/stm32f4x.cfg +++ b/tcl/target/stm32f4x.cfg @@ -1,5 +1,10 @@ # script for stm32f4x family +# +# stm32 devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -29,7 +34,9 @@ if { [info exists WORKAREASIZE] } { adapter_khz 1000 adapter_nsrst_delay 100 -jtag_ntrst_delay 100 +if {$using_jtag} { + jtag_ntrst_delay 100 +} #jtag scan chain if { [info exists CPUTAPID] } { @@ -39,7 +46,8 @@ if { [info exists CPUTAPID] } { # Section 38.6.3 - corresponds to Cortex-M4 r0p1 set _CPUTAPID 0x4ba00477 } -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID if { [info exists BSTAPID] } { set _BSTAPID $BSTAPID @@ -51,8 +59,11 @@ if { [info exists BSTAPID] } { # STM32F42xxx and STM32F43xxx set _BSTAPID2 0x06419041 } -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \ + +if {$using_jtag} { + jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \ -expected-id $_BSTAPID2 +} set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME diff --git a/tcl/target/stm32l.cfg b/tcl/target/stm32l.cfg index 8e6a10e1..f9f7425b 100644 --- a/tcl/target/stm32l.cfg +++ b/tcl/target/stm32l.cfg @@ -1,5 +1,10 @@ # script for stm32l +# +# stm32 devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -25,7 +30,9 @@ if { [info exists WORKAREASIZE] } { adapter_khz 100 adapter_nsrst_delay 100 -jtag_ntrst_delay 100 +if {$using_jtag} { + jtag_ntrst_delay 100 +} #jtag scan chain if { [info exists CPUTAPID] } { @@ -35,7 +42,8 @@ if { [info exists CPUTAPID] } { # Section 24.6.3 set _CPUTAPID 0x4ba00477 } -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID if { [info exists BSTAPID] } { # FIXME this never gets used to override defaults... @@ -45,14 +53,16 @@ if { [info exists BSTAPID] } { # Section 24.6.2 set _BSTAPID 0x06416041 } -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID + +if {$using_jtag} { + jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID +} set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - # flash size will be probed set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME stm32lx 0x08000000 0 0 0 $_TARGETNAME diff --git a/tcl/target/stm32w108xx.cfg b/tcl/target/stm32w108xx.cfg index ca4f1532..4bc51fc0 100644 --- a/tcl/target/stm32w108xx.cfg +++ b/tcl/target/stm32w108xx.cfg @@ -5,6 +5,11 @@ # Date: 2013-06-09 # Author: Giuseppe Barba +# +# stm32 devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] == 0 } { set _CHIPNAME stm32w108 } else { @@ -31,18 +36,19 @@ if { [info exists ENDIAN] } { set _ENDIAN little } -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID -if { [info exists BSTAPID] } { +if {$using_jtag} { + if { [info exists BSTAPID] } { set _BSTAPID $BSTAPID jtag newtap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf -expected-id 0x269a862b -} else { + } else { set _BSTAPID_1 0x169a862b set _BSTAPID_2 0x269a862b jtag newtap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf \ -expected-id $_BSTAPID_1 -expected-id $_BSTAPID_2 + } } - # # Set Target #