From: rtel Date: Sat, 21 Jan 2017 21:59:25 +0000 (+0000) Subject: Update UltraScale R5 hardware definition and BSP for 2016.4 SDK tools. X-Git-Tag: V10.0.0~37 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ad40db5f8e6cd48e891bb067c1eb9316d34b2168;p=freertos Update UltraScale R5 hardware definition and BSP for 2016.4 SDK tools. git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@2482 1d2547de-c912-0410-9cb9-b8ca96c0e9e2 --- diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.cproject b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.cproject index d73fe8014..805e98fca 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.cproject +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/.cproject @@ -1,8 +1,8 @@ - - + + diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/include/xparameters.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/include/xparameters.h index efc88f158..c85fe0a27 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/include/xparameters.h +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/include/xparameters.h @@ -18,6 +18,8 @@ #include "xparameters_ps.h" +#define XPS_BOARD_ZCU102 + /******************************************************************/ /* @@ -385,11 +387,6 @@ #define XPAR_PSU_CRL_APB_S_AXI_HIGHADDR 0xFF85FFFF -/* Definitions for peripheral PSU_CSU_0 */ -#define XPAR_PSU_CSU_0_S_AXI_BASEADDR 0xFFCA0000 -#define XPAR_PSU_CSU_0_S_AXI_HIGHADDR 0xFFCAFFFF - - /* Definitions for peripheral PSU_DDR_PHY */ #define XPAR_PSU_DDR_PHY_S_AXI_BASEADDR 0xFD080000 #define XPAR_PSU_DDR_PHY_S_AXI_HIGHADDR 0xFD08FFFF @@ -680,7 +677,7 @@ /******************************************************************/ -#define XPAR_XIPIPSU_NUM_INSTANCES 2 +#define XPAR_XIPIPSU_NUM_INSTANCES 1 /* Parameter definitions for peripheral psu_ipi_1 */ #define XPAR_PSU_IPI_1_DEVICE_ID 0 @@ -689,13 +686,6 @@ #define XPAR_PSU_IPI_1_BUFFER_INDEX 0 #define XPAR_PSU_IPI_1_INT_ID 65 -/* Parameter definitions for peripheral psu_ipi_2 */ -#define XPAR_PSU_IPI_2_DEVICE_ID 1 -#define XPAR_PSU_IPI_2_BASE_ADDRESS 0xFF320000 -#define XPAR_PSU_IPI_2_BIT_MASK 0x00000200 -#define XPAR_PSU_IPI_2_BUFFER_INDEX 1 -#define XPAR_PSU_IPI_2_INT_ID 66 - /* Canonical definitions for peripheral psu_ipi_1 */ #define XPAR_XIPIPSU_0_DEVICE_ID XPAR_PSU_IPI_1_DEVICE_ID #define XPAR_XIPIPSU_0_BASE_ADDRESS XPAR_PSU_IPI_1_BASE_ADDRESS @@ -703,13 +693,6 @@ #define XPAR_XIPIPSU_0_BUFFER_INDEX XPAR_PSU_IPI_1_BUFFER_INDEX #define XPAR_XIPIPSU_0_INT_ID XPAR_PSU_IPI_1_INT_ID -/* Canonical definitions for peripheral psu_ipi_2 */ -#define XPAR_XIPIPSU_1_DEVICE_ID XPAR_PSU_IPI_2_DEVICE_ID -#define XPAR_XIPIPSU_1_BASE_ADDRESS XPAR_PSU_IPI_2_BASE_ADDRESS -#define XPAR_XIPIPSU_1_BIT_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPSU_1_BUFFER_INDEX XPAR_PSU_IPI_2_BUFFER_INDEX -#define XPAR_XIPIPSU_1_INT_ID XPAR_PSU_IPI_2_INT_ID - #define XPAR_XIPIPSU_NUM_TARGETS 11 #define XPAR_PSU_IPI_0_BIT_MASK 0x00000001 @@ -738,54 +721,30 @@ #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH0_INDEX 0 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH1_MASK XPAR_PSU_IPI_1_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH1_INDEX 1 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH2_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_0_CH2_INDEX 2 #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH0_INDEX 0 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH1_MASK XPAR_PSU_IPI_1_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH1_INDEX 1 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH2_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_1_CH2_INDEX 2 #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH0_INDEX 0 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH1_MASK XPAR_PSU_IPI_1_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH1_INDEX 1 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH2_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_2_CH2_INDEX 2 #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH0_MASK XPAR_PSU_IPI_0_BIT_MASK #define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH0_INDEX 0 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH1_MASK XPAR_PSU_IPI_1_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH1_INDEX 1 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH2_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXA53_3_CH2_INDEX 2 #define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH0_MASK XPAR_PSU_IPI_1_BIT_MASK #define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH0_INDEX 1 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH1_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_0_CH1_INDEX 2 - -#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH0_MASK XPAR_PSU_IPI_1_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH0_INDEX 1 -#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH1_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH1_INDEX 2 - -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH0_MASK XPAR_PSU_IPI_1_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH0_INDEX 1 -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH1_MASK XPAR_PSU_IPI_2_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH1_INDEX 2 -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH2_MASK XPAR_PSU_IPI_3_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH2_INDEX 3 -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH3_MASK XPAR_PSU_IPI_4_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH3_INDEX 4 -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH4_MASK XPAR_PSU_IPI_5_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH4_INDEX 5 -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH5_MASK XPAR_PSU_IPI_6_BIT_MASK -#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH5_INDEX 6 + +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH0_MASK XPAR_PSU_IPI_2_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_CORTEXR5_1_CH0_INDEX 2 + +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH0_MASK XPAR_PSU_IPI_3_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH0_INDEX 3 +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH1_MASK XPAR_PSU_IPI_4_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH1_INDEX 4 +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH2_MASK XPAR_PSU_IPI_5_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH2_INDEX 5 +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH3_MASK XPAR_PSU_IPI_6_BIT_MASK +#define XPAR_XIPIPS_TARGET_PSU_PMU_0_CH3_INDEX 6 /* Definitions for driver QSPIPSU */ #define XPAR_XQSPIPSU_NUM_INSTANCES 1 diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_1/src/xipipsu_g.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_1/src/xipipsu_g.c index afbbc5809..d40c925a9 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_1/src/xipipsu_g.c +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/psu_cortexr5_0/libsrc/ipipsu_v2_1/src/xipipsu_g.c @@ -101,61 +101,5 @@ XIpiPsu_Config XIpiPsu_ConfigTable[] = XPAR_PSU_IPI_10_BUFFER_INDEX } } - }, - - { - XPAR_PSU_IPI_2_DEVICE_ID, - XPAR_PSU_IPI_2_BASE_ADDRESS, - XPAR_PSU_IPI_2_BIT_MASK, - XPAR_PSU_IPI_2_BUFFER_INDEX, - XPAR_PSU_IPI_2_INT_ID, - XPAR_XIPIPSU_NUM_TARGETS, - { - - { - XPAR_PSU_IPI_0_BIT_MASK, - XPAR_PSU_IPI_0_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_1_BIT_MASK, - XPAR_PSU_IPI_1_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_2_BIT_MASK, - XPAR_PSU_IPI_2_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_3_BIT_MASK, - XPAR_PSU_IPI_3_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_4_BIT_MASK, - XPAR_PSU_IPI_4_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_5_BIT_MASK, - XPAR_PSU_IPI_5_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_6_BIT_MASK, - XPAR_PSU_IPI_6_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_7_BIT_MASK, - XPAR_PSU_IPI_7_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_8_BIT_MASK, - XPAR_PSU_IPI_8_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_9_BIT_MASK, - XPAR_PSU_IPI_9_BUFFER_INDEX - }, - { - XPAR_PSU_IPI_10_BIT_MASK, - XPAR_PSU_IPI_10_BUFFER_INDEX - } - } } }; diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/system.mss b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/system.mss index 76354534a..1c8fbdb9b 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/system.mss +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/RTOSDemo_R5_bsp/system.mss @@ -186,12 +186,6 @@ BEGIN DRIVER PARAMETER HW_INSTANCE = psu_crl_apb END -BEGIN DRIVER - PARAMETER DRIVER_NAME = generic - PARAMETER DRIVER_VER = 2.0 - PARAMETER HW_INSTANCE = psu_csu_0 -END - BEGIN DRIVER PARAMETER DRIVER_NAME = csudma PARAMETER DRIVER_VER = 1.1 @@ -408,12 +402,6 @@ BEGIN DRIVER PARAMETER HW_INSTANCE = psu_ipi_1 END -BEGIN DRIVER - PARAMETER DRIVER_NAME = ipipsu - PARAMETER DRIVER_VER = 2.1 - PARAMETER HW_INSTANCE = psu_ipi_2 -END - BEGIN DRIVER PARAMETER DRIVER_NAME = generic PARAMETER DRIVER_VER = 2.0 diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/.project b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/.project index 78fcf3cf0..bb3252d94 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/.project +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/.project @@ -1,7 +1,7 @@ ZynqMP_ZCU102_hw_platform - Created by SDK v2016.1 + Created by SDK v2016.4 @@ -11,7 +11,7 @@ - 1462451796084 + 1484843910633 6 @@ -20,7 +20,7 @@ - 1462451796084 + 1484843910635 6 @@ -29,7 +29,7 @@ - 1462451796094 + 1484843910637 6 diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.c index ec9441e4c..f206bc7bf 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.c +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.c @@ -878,99 +878,6 @@ unsigned long psu_pll_init_data() { } unsigned long psu_clock_init_data() { // : CLOCK CONTROL SLCR REGISTER - /*Register : GEM0_REF_CTRL @ 0XFF5E0050

- - Clock active for the RX channel - PSU_CRL_APB_GEM0_REF_CTRL_RX_CLKACT 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR0 0x8 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM0_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0050, 0x063F3F07U ,0x06010800U) - RegMask = (CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT - | 0x00000008U << CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM0_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U); - /*############################################################################################################################ */ - - /*Register : GEM1_REF_CTRL @ 0XFF5E0054

- - Clock active for the RX channel - PSU_CRL_APB_GEM1_REF_CTRL_RX_CLKACT 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM1_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR0 0x8 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM1_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0054, 0x063F3F07U ,0x06010800U) - RegMask = (CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT - | 0x00000008U << CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM1_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U); - /*############################################################################################################################ */ - - /*Register : GEM2_REF_CTRL @ 0XFF5E0058

- - Clock active for the RX channel - PSU_CRL_APB_GEM2_REF_CTRL_RX_CLKACT 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM2_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR0 0x8 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM2_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0058, 0x063F3F07U ,0x06010800U) - RegMask = (CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT - | 0x00000008U << CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM2_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U); - /*############################################################################################################################ */ - /*Register : GEM3_REF_CTRL @ 0XFF5E005C

Clock active for the RX channel @@ -1002,33 +909,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_GEM3_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010C00U); /*############################################################################################################################ */ - /*Register : GEM_TSU_REF_CTRL @ 0XFF5E0100

- - 6 bit divider - PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0 0x6 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM_TSU_REF_CTRL_SRCSEL 0x2 - - 6 bit divider - PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM_TSU_REF_CTRL_CLKACT 0x1 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0100, 0x013F3F07U ,0x01010602U) - RegMask = (CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK | CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK | 0 ); - - RegVal = ((0x00000006U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT - | 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT - | 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM_TSU_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010602U); - /*############################################################################################################################ */ - /*Register : USB0_BUS_REF_CTRL @ 0XFF5E0060

Clock active signal. Switch to 0 to disable the clock @@ -1056,33 +936,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_USB0_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010600U); /*############################################################################################################################ */ - /*Register : USB1_BUS_REF_CTRL @ 0XFF5E0064

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_USB1_BUS_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0 0x4 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_USB1_BUS_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0064, 0x023F3F07U ,0x02010400U) - RegMask = (CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT - | 0x00000004U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_USB1_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010400U); - /*############################################################################################################################ */ - /*Register : USB3_DUAL_REF_CTRL @ 0XFF5E004C

Clock active signal. Switch to 0 to disable the clock @@ -1137,33 +990,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_QSPI_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010C00U); /*############################################################################################################################ */ - /*Register : SDIO0_REF_CTRL @ 0XFF5E006C

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_SDIO0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR0 0x7 - - 000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_SDIO0_REF_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E006C, 0x013F3F07U ,0x01010702U) - RegMask = (CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT - | 0x00000007U << CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_SDIO0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U); - /*############################################################################################################################ */ - /*Register : SDIO1_REF_CTRL @ 0XFF5E0070

Clock active signal. Switch to 0 to disable the clock @@ -1313,87 +1139,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_I2C1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U); /*############################################################################################################################ */ - /*Register : SPI0_REF_CTRL @ 0XFF5E007C

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_SPI0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR0 0x7 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_SPI0_REF_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E007C, 0x013F3F07U ,0x01010702U) - RegMask = (CRL_APB_SPI0_REF_CTRL_CLKACT_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT - | 0x00000007U << CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_SPI0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U); - /*############################################################################################################################ */ - - /*Register : SPI1_REF_CTRL @ 0XFF5E0080

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_SPI1_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR0 0x7 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_SPI1_REF_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0080, 0x013F3F07U ,0x01010702U) - RegMask = (CRL_APB_SPI1_REF_CTRL_CLKACT_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT - | 0x00000007U << CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_SPI1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U); - /*############################################################################################################################ */ - - /*Register : CAN0_REF_CTRL @ 0XFF5E0084

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_CAN0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR0 0xa - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_CAN0_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0084, 0x013F3F07U ,0x01010A00U) - RegMask = (CRL_APB_CAN0_REF_CTRL_CLKACT_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK | CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT - | 0x0000000AU << CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_CAN0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U); - /*############################################################################################################################ */ - /*Register : CAN1_REF_CTRL @ 0XFF5E0088

Clock active signal. Switch to 0 to disable the clock @@ -1468,29 +1213,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_IOU_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000602U); /*############################################################################################################################ */ - /*Register : CSU_PLL_CTRL @ 0XFF5E00A0

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_CSU_PLL_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_CSU_PLL_CTRL_DIVISOR0 0x3 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_CSU_PLL_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E00A0, 0x01003F07U ,0x01000302U) - RegMask = (CRL_APB_CSU_PLL_CTRL_CLKACT_MASK | CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK | CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT - | 0x00000003U << CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_CSU_PLL_CTRL_OFFSET ,0x01003F07U ,0x01000302U); - /*############################################################################################################################ */ - /*Register : PCAP_CTRL @ 0XFF5E00A4

Clock active signal. Switch to 0 to disable the clock @@ -1583,33 +1305,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_DBG_LPD_CTRL_OFFSET ,0x01003F07U ,0x01000602U); /*############################################################################################################################ */ - /*Register : NAND_REF_CTRL @ 0XFF5E00B4

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_NAND_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_NAND_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_NAND_REF_CTRL_DIVISOR0 0xa - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_NAND_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E00B4, 0x013F3F07U ,0x01010A00U) - RegMask = (CRL_APB_NAND_REF_CTRL_CLKACT_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK | CRL_APB_NAND_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT - | 0x0000000AU << CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_NAND_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U); - /*############################################################################################################################ */ - /*Register : ADMA_REF_CTRL @ 0XFF5E00B8

Clock active signal. Switch to 0 to disable the clock @@ -2149,29 +1844,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRF_APB_TOPSW_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000502U); /*############################################################################################################################ */ - /*Register : GTGREF0_REF_CTRL @ 0XFD1A00C8

- - 6 bit divider - PSU_CRF_APB_GTGREF0_REF_CTRL_DIVISOR0 0x4 - - 000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of - he new clock. This is not usually an issue, but designers must be aware.) - PSU_CRF_APB_GTGREF0_REF_CTRL_SRCSEL 0x0 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRF_APB_GTGREF0_REF_CTRL_CLKACT 0x1 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFD1A00C8, 0x01003F07U ,0x01000400U) - RegMask = (CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK | CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK | CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK | 0 ); - - RegVal = ((0x00000004U << CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT - | 0x00000001U << CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRF_APB_GTGREF0_REF_CTRL_OFFSET ,0x01003F07U ,0x01000400U); - /*############################################################################################################################ */ - /*Register : DBG_TSTMP_CTRL @ 0XFD1A00F8

6 bit divider @@ -3342,22 +3014,22 @@ unsigned long psu_ddr_init_data() { ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L DDR2/LPDDR3/LPDDR4 devices. - PSU_DDRC_DRAMTMG7_T_CKPDE 0x1 + PSU_DDRC_DRAMTMG7_T_CKPDE 0x6 This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO= , program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti g mDDR or LPDDR2/LPDDR3/LPDDR4 devices. - PSU_DDRC_DRAMTMG7_T_CKPDX 0x1 + PSU_DDRC_DRAMTMG7_T_CKPDX 0x6 SDRAM Timing Register 7 - (OFFSET, MASK, VALUE) (0XFD07011C, 0x00000F0FU ,0x00000101U) + (OFFSET, MASK, VALUE) (0XFD07011C, 0x00000F0FU ,0x00000606U) RegMask = (DDRC_DRAMTMG7_T_CKPDE_MASK | DDRC_DRAMTMG7_T_CKPDX_MASK | 0 ); - RegVal = ((0x00000001U << DDRC_DRAMTMG7_T_CKPDE_SHIFT - | 0x00000001U << DDRC_DRAMTMG7_T_CKPDX_SHIFT + RegVal = ((0x00000006U << DDRC_DRAMTMG7_T_CKPDE_SHIFT + | 0x00000006U << DDRC_DRAMTMG7_T_CKPDX_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDRC_DRAMTMG7_OFFSET ,0x00000F0FU ,0x00000101U); + PSU_Mask_Write (DDRC_DRAMTMG7_OFFSET ,0x00000F0FU ,0x00000606U); /*############################################################################################################################ */ /*Register : DRAMTMG8 @ 0XFD070120

@@ -3680,13 +3352,13 @@ unsigned long psu_ddr_init_data() { s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20 8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107 cycles - 0xE - 262144 cycles - 0xF - Unlimited - PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD 0x4 + PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD 0x0 Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled PSU_DDRC_DFILPCFG0_DFI_LP_EN_PD 0x1 DFI Low Power Configuration Register 0 - (OFFSET, MASK, VALUE) (0XFD070198, 0x0FF1F1F1U ,0x07000141U) + (OFFSET, MASK, VALUE) (0XFD070198, 0x0FF1F1F1U ,0x07000101U) RegMask = (DDRC_DFILPCFG0_DFI_TLP_RESP_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK | DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK | 0 ); RegVal = ((0x00000007U << DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT @@ -3694,10 +3366,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT | 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT | 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT - | 0x00000004U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT + | 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT | 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDRC_DFILPCFG0_OFFSET ,0x0FF1F1F1U ,0x07000141U); + PSU_Mask_Write (DDRC_DFILPCFG0_OFFSET ,0x0FF1F1F1U ,0x07000101U); /*############################################################################################################################ */ /*Register : DFILPCFG1 @ 0XFD07019C

@@ -5644,10 +5316,10 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_PGCR2_PLLFSMBYP 0x0 Refresh Period - PSU_DDR_PHY_PGCR2_TREFPRD 0x12302 + PSU_DDR_PHY_PGCR2_TREFPRD 0x10028 PHY General Configuration Register 2 - (OFFSET, MASK, VALUE) (0XFD080018, 0xFFFFFFFFU ,0x00F12302U) + (OFFSET, MASK, VALUE) (0XFD080018, 0xFFFFFFFFU ,0x00F10028U) RegMask = (DDR_PHY_PGCR2_CLRTSTAT_MASK | DDR_PHY_PGCR2_CLRZCAL_MASK | DDR_PHY_PGCR2_CLRPERR_MASK | DDR_PHY_PGCR2_ICPC_MASK | DDR_PHY_PGCR2_DTPMXTMR_MASK | DDR_PHY_PGCR2_INITFSMBYP_MASK | DDR_PHY_PGCR2_PLLFSMBYP_MASK | DDR_PHY_PGCR2_TREFPRD_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_PGCR2_CLRTSTAT_SHIFT @@ -5657,9 +5329,67 @@ unsigned long psu_ddr_init_data() { | 0x0000000FU << DDR_PHY_PGCR2_DTPMXTMR_SHIFT | 0x00000000U << DDR_PHY_PGCR2_INITFSMBYP_SHIFT | 0x00000000U << DDR_PHY_PGCR2_PLLFSMBYP_SHIFT - | 0x00012302U << DDR_PHY_PGCR2_TREFPRD_SHIFT + | 0x00010028U << DDR_PHY_PGCR2_TREFPRD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_PGCR2_OFFSET ,0xFFFFFFFFU ,0x00F10028U); + /*############################################################################################################################ */ + + /*Register : PGCR3 @ 0XFD08001C

+ + CKN Enable + PSU_DDR_PHY_PGCR3_CKNEN 0x55 + + CK Enable + PSU_DDR_PHY_PGCR3_CKEN 0xaa + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_PGCR3_RESERVED_15 0x0 + + Enable Clock Gating for AC [0] ctl_rd_clk + PSU_DDR_PHY_PGCR3_GATEACRDCLK 0x2 + + Enable Clock Gating for AC [0] ddr_clk + PSU_DDR_PHY_PGCR3_GATEACDDRCLK 0x2 + + Enable Clock Gating for AC [0] ctl_clk + PSU_DDR_PHY_PGCR3_GATEACCTLCLK 0x2 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_PGCR3_RESERVED_8 0x0 + + Controls DDL Bypass Modes + PSU_DDR_PHY_PGCR3_DDLBYPMODE 0x2 + + IO Loop-Back Select + PSU_DDR_PHY_PGCR3_IOLB 0x0 + + AC Receive FIFO Read Mode + PSU_DDR_PHY_PGCR3_RDMODE 0x0 + + Read FIFO Reset Disable + PSU_DDR_PHY_PGCR3_DISRST 0x0 + + Clock Level when Clock Gating + PSU_DDR_PHY_PGCR3_CLKLEVEL 0x0 + + PHY General Configuration Register 3 + (OFFSET, MASK, VALUE) (0XFD08001C, 0xFFFFFFFFU ,0x55AA5480U) + RegMask = (DDR_PHY_PGCR3_CKNEN_MASK | DDR_PHY_PGCR3_CKEN_MASK | DDR_PHY_PGCR3_RESERVED_15_MASK | DDR_PHY_PGCR3_GATEACRDCLK_MASK | DDR_PHY_PGCR3_GATEACDDRCLK_MASK | DDR_PHY_PGCR3_GATEACCTLCLK_MASK | DDR_PHY_PGCR3_RESERVED_8_MASK | DDR_PHY_PGCR3_DDLBYPMODE_MASK | DDR_PHY_PGCR3_IOLB_MASK | DDR_PHY_PGCR3_RDMODE_MASK | DDR_PHY_PGCR3_DISRST_MASK | DDR_PHY_PGCR3_CLKLEVEL_MASK | 0 ); + + RegVal = ((0x00000055U << DDR_PHY_PGCR3_CKNEN_SHIFT + | 0x000000AAU << DDR_PHY_PGCR3_CKEN_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_RESERVED_15_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_GATEACRDCLK_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_GATEACDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_GATEACCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_RESERVED_8_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_DDLBYPMODE_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_IOLB_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_RDMODE_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_DISRST_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_CLKLEVEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_PGCR2_OFFSET ,0xFFFFFFFFU ,0x00F12302U); + PSU_Mask_Write (DDR_PHY_PGCR3_OFFSET ,0xFFFFFFFFU ,0x55AA5480U); /*############################################################################################################################ */ /*Register : PGCR5 @ 0XFD080024

@@ -5915,16 +5645,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTPR0_RESERVED_15 0x0 Precharge command period - PSU_DDR_PHY_DTPR0_TRP 0x12 + PSU_DDR_PHY_DTPR0_TRP 0xf Reserved. Return zeroes on reads. PSU_DDR_PHY_DTPR0_RESERVED_7_5 0x0 Internal read to precharge command delay - PSU_DDR_PHY_DTPR0_TRTP 0x8 + PSU_DDR_PHY_DTPR0_TRTP 0x9 DRAM Timing Parameters Register 0 - (OFFSET, MASK, VALUE) (0XFD080110, 0xFFFFFFFFU ,0x06241208U) + (OFFSET, MASK, VALUE) (0XFD080110, 0xFFFFFFFFU ,0x06240F09U) RegMask = (DDR_PHY_DTPR0_RESERVED_31_29_MASK | DDR_PHY_DTPR0_TRRD_MASK | DDR_PHY_DTPR0_RESERVED_23_MASK | DDR_PHY_DTPR0_TRAS_MASK | DDR_PHY_DTPR0_RESERVED_15_MASK | DDR_PHY_DTPR0_TRP_MASK | DDR_PHY_DTPR0_RESERVED_7_5_MASK | DDR_PHY_DTPR0_TRTP_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DTPR0_RESERVED_31_29_SHIFT @@ -5932,11 +5662,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DTPR0_RESERVED_23_SHIFT | 0x00000024U << DDR_PHY_DTPR0_TRAS_SHIFT | 0x00000000U << DDR_PHY_DTPR0_RESERVED_15_SHIFT - | 0x00000012U << DDR_PHY_DTPR0_TRP_SHIFT + | 0x0000000FU << DDR_PHY_DTPR0_TRP_SHIFT | 0x00000000U << DDR_PHY_DTPR0_RESERVED_7_5_SHIFT - | 0x00000008U << DDR_PHY_DTPR0_TRTP_SHIFT + | 0x00000009U << DDR_PHY_DTPR0_TRTP_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DTPR0_OFFSET ,0xFFFFFFFFU ,0x06241208U); + PSU_Mask_Write (DDR_PHY_DTPR0_OFFSET ,0xFFFFFFFFU ,0x06240F09U); /*############################################################################################################################ */ /*Register : DTPR1 @ 0XFD080114

@@ -6044,10 +5774,10 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTPR3_RESERVED_7_3 0x0 DQS output access time from CK/CK# (LPDDR2/3 only) - PSU_DDR_PHY_DTPR3_TDQSCK 0x4 + PSU_DDR_PHY_DTPR3_TDQSCK 0x0 DRAM Timing Parameters Register 3 - (OFFSET, MASK, VALUE) (0XFD08011C, 0xFFFFFFFFU ,0x83000804U) + (OFFSET, MASK, VALUE) (0XFD08011C, 0xFFFFFFFFU ,0x83000800U) RegMask = (DDR_PHY_DTPR3_TOFDX_MASK | DDR_PHY_DTPR3_TCCD_MASK | DDR_PHY_DTPR3_TDLLK_MASK | DDR_PHY_DTPR3_RESERVED_15_12_MASK | DDR_PHY_DTPR3_TDQSCKMAX_MASK | DDR_PHY_DTPR3_RESERVED_7_3_MASK | DDR_PHY_DTPR3_TDQSCK_MASK | 0 ); RegVal = ((0x00000004U << DDR_PHY_DTPR3_TOFDX_SHIFT @@ -6056,9 +5786,9 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DTPR3_RESERVED_15_12_SHIFT | 0x00000008U << DDR_PHY_DTPR3_TDQSCKMAX_SHIFT | 0x00000000U << DDR_PHY_DTPR3_RESERVED_7_3_SHIFT - | 0x00000004U << DDR_PHY_DTPR3_TDQSCK_SHIFT + | 0x00000000U << DDR_PHY_DTPR3_TDQSCK_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DTPR3_OFFSET ,0xFFFFFFFFU ,0x83000804U); + PSU_Mask_Write (DDR_PHY_DTPR3_OFFSET ,0xFFFFFFFFU ,0x83000800U); /*############################################################################################################################ */ /*Register : DTPR4 @ 0XFD080120

@@ -6307,6 +6037,50 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_RDIMMGCR1_OFFSET ,0xFFFFFFFFU ,0x00000C80U); /*############################################################################################################################ */ + /*Register : RDIMMCR0 @ 0XFD080150

+ + DDR4/DDR3 Control Word 7 + PSU_DDR_PHY_RDIMMCR0_RC7 0x0 + + DDR4 Control Word 6 (Comman space Control Word) / DDR3 Reserved + PSU_DDR_PHY_RDIMMCR0_RC6 0x0 + + DDR4/DDR3 Control Word 5 (CK Driver Characteristics Control Word) + PSU_DDR_PHY_RDIMMCR0_RC5 0x0 + + DDR4 Control Word 4 (ODT and CKE Signals Driver Characteristics Control Word) / DDR3 Control Word 4 (Control Signals Driver C + aracteristics Control Word) + PSU_DDR_PHY_RDIMMCR0_RC4 0x0 + + DDR4 Control Word 3 (CA and CS Signals Driver Characteristics Control Word) / DDR3 Control Word 3 (Command/Address Signals Dr + ver Characteristrics Control Word) + PSU_DDR_PHY_RDIMMCR0_RC3 0x0 + + DDR4 Control Word 2 (Timing and IBT Control Word) / DDR3 Control Word 2 (Timing Control Word) + PSU_DDR_PHY_RDIMMCR0_RC2 0x0 + + DDR4/DDR3 Control Word 1 (Clock Driver Enable Control Word) + PSU_DDR_PHY_RDIMMCR0_RC1 0x0 + + DDR4/DDR3 Control Word 0 (Global Features Control Word) + PSU_DDR_PHY_RDIMMCR0_RC0 0x0 + + RDIMM Control Register 0 + (OFFSET, MASK, VALUE) (0XFD080150, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_RDIMMCR0_RC7_MASK | DDR_PHY_RDIMMCR0_RC6_MASK | DDR_PHY_RDIMMCR0_RC5_MASK | DDR_PHY_RDIMMCR0_RC4_MASK | DDR_PHY_RDIMMCR0_RC3_MASK | DDR_PHY_RDIMMCR0_RC2_MASK | DDR_PHY_RDIMMCR0_RC1_MASK | DDR_PHY_RDIMMCR0_RC0_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_RDIMMCR0_RC7_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC6_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC5_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC4_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC3_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC2_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC1_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_RDIMMCR0_OFFSET ,0xFFFFFFFFU ,0x00000000U); + /*############################################################################################################################ */ + /*Register : RDIMMCR1 @ 0XFD080154

Control Word 15 @@ -6804,7 +6578,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTCR0_RESERVED_27_26 0x0 Data Training Debug Rank Select - PSU_DDR_PHY_DTCR0_DTDRS 0x1 + PSU_DDR_PHY_DTCR0_DTDRS 0x0 Data Training with Early/Extended Gate PSU_DDR_PHY_DTCR0_DTEXG 0x0 @@ -6822,7 +6596,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTCR0_DTDBS 0x0 Data Training read DBI deskewing configuration - PSU_DDR_PHY_DTCR0_DTRDBITR 0x0 + PSU_DDR_PHY_DTCR0_DTRDBITR 0x2 Reserved. Return zeroes on reads. PSU_DDR_PHY_DTCR0_RESERVED_13 0x0 @@ -6846,18 +6620,18 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTCR0_DTRPTN 0x7 Data Training Configuration Register 0 - (OFFSET, MASK, VALUE) (0XFD080200, 0xFFFFFFFFU ,0x810011C7U) + (OFFSET, MASK, VALUE) (0XFD080200, 0xFFFFFFFFU ,0x800091C7U) RegMask = (DDR_PHY_DTCR0_RFSHDT_MASK | DDR_PHY_DTCR0_RESERVED_27_26_MASK | DDR_PHY_DTCR0_DTDRS_MASK | DDR_PHY_DTCR0_DTEXG_MASK | DDR_PHY_DTCR0_DTEXD_MASK | DDR_PHY_DTCR0_DTDSTP_MASK | DDR_PHY_DTCR0_DTDEN_MASK | DDR_PHY_DTCR0_DTDBS_MASK | DDR_PHY_DTCR0_DTRDBITR_MASK | DDR_PHY_DTCR0_RESERVED_13_MASK | DDR_PHY_DTCR0_DTWBDDM_MASK | DDR_PHY_DTCR0_RFSHEN_MASK | DDR_PHY_DTCR0_DTCMPD_MASK | DDR_PHY_DTCR0_DTMPR_MASK | DDR_PHY_DTCR0_RESERVED_5_4_MASK | DDR_PHY_DTCR0_DTRPTN_MASK | 0 ); RegVal = ((0x00000008U << DDR_PHY_DTCR0_RFSHDT_SHIFT | 0x00000000U << DDR_PHY_DTCR0_RESERVED_27_26_SHIFT - | 0x00000001U << DDR_PHY_DTCR0_DTDRS_SHIFT + | 0x00000000U << DDR_PHY_DTCR0_DTDRS_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTEXG_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTEXD_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTDSTP_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTDEN_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTDBS_SHIFT - | 0x00000000U << DDR_PHY_DTCR0_DTRDBITR_SHIFT + | 0x00000002U << DDR_PHY_DTCR0_DTRDBITR_SHIFT | 0x00000000U << DDR_PHY_DTCR0_RESERVED_13_SHIFT | 0x00000001U << DDR_PHY_DTCR0_DTWBDDM_SHIFT | 0x00000001U << DDR_PHY_DTCR0_RFSHEN_SHIFT @@ -6866,7 +6640,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DTCR0_RESERVED_5_4_SHIFT | 0x00000007U << DDR_PHY_DTCR0_DTRPTN_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DTCR0_OFFSET ,0xFFFFFFFFU ,0x810011C7U); + PSU_Mask_Write (DDR_PHY_DTCR0_OFFSET ,0xFFFFFFFFU ,0x800091C7U); /*############################################################################################################################ */ /*Register : DTCR1 @ 0XFD080204

@@ -6962,6 +6736,20 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_CATR0_OFFSET ,0xFFFFFFFFU ,0x00141054U); /*############################################################################################################################ */ + /*Register : BISTLSR @ 0XFD080414

+ + LFSR seed for pseudo-random BIST patterns + PSU_DDR_PHY_BISTLSR_SEED 0x12341000 + + BIST LFSR Seed Register + (OFFSET, MASK, VALUE) (0XFD080414, 0xFFFFFFFFU ,0x12341000U) + RegMask = (DDR_PHY_BISTLSR_SEED_MASK | 0 ); + + RegVal = ((0x12341000U << DDR_PHY_BISTLSR_SEED_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_BISTLSR_OFFSET ,0xFFFFFFFFU ,0x12341000U); + /*############################################################################################################################ */ + /*Register : RIOCR5 @ 0XFD0804F4

Reserved. Return zeroes on reads. @@ -7287,13 +7075,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_VTCR1_SHREN 0x1 Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training - PSU_DDR_PHY_VTCR1_TVREFIO 0x4 + PSU_DDR_PHY_VTCR1_TVREFIO 0x7 Eye LCDL Offset value for VREF training - PSU_DDR_PHY_VTCR1_EOFF 0x1 + PSU_DDR_PHY_VTCR1_EOFF 0x0 Number of LCDL Eye points for which VREF training is repeated - PSU_DDR_PHY_VTCR1_ENUM 0x1 + PSU_DDR_PHY_VTCR1_ENUM 0x0 HOST (IO) internal VREF training Enable PSU_DDR_PHY_VTCR1_HVEN 0x1 @@ -7302,7 +7090,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_VTCR1_HVIO 0x1 VREF Training Control Register 1 - (OFFSET, MASK, VALUE) (0XFD08052C, 0xFFFFFFFFU ,0x07F0018FU) + (OFFSET, MASK, VALUE) (0XFD08052C, 0xFFFFFFFFU ,0x07F001E3U) RegMask = (DDR_PHY_VTCR1_HVSS_MASK | DDR_PHY_VTCR1_RESERVED_27_MASK | DDR_PHY_VTCR1_HVMAX_MASK | DDR_PHY_VTCR1_RESERVED_19_MASK | DDR_PHY_VTCR1_HVMIN_MASK | DDR_PHY_VTCR1_RESERVED_11_MASK | DDR_PHY_VTCR1_SHRNK_MASK | DDR_PHY_VTCR1_SHREN_MASK | DDR_PHY_VTCR1_TVREFIO_MASK | DDR_PHY_VTCR1_EOFF_MASK | DDR_PHY_VTCR1_ENUM_MASK | DDR_PHY_VTCR1_HVEN_MASK | DDR_PHY_VTCR1_HVIO_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_VTCR1_HVSS_SHIFT @@ -7313,13 +7101,97 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_VTCR1_RESERVED_11_SHIFT | 0x00000000U << DDR_PHY_VTCR1_SHRNK_SHIFT | 0x00000001U << DDR_PHY_VTCR1_SHREN_SHIFT - | 0x00000004U << DDR_PHY_VTCR1_TVREFIO_SHIFT - | 0x00000001U << DDR_PHY_VTCR1_EOFF_SHIFT - | 0x00000001U << DDR_PHY_VTCR1_ENUM_SHIFT + | 0x00000007U << DDR_PHY_VTCR1_TVREFIO_SHIFT + | 0x00000000U << DDR_PHY_VTCR1_EOFF_SHIFT + | 0x00000000U << DDR_PHY_VTCR1_ENUM_SHIFT | 0x00000001U << DDR_PHY_VTCR1_HVEN_SHIFT | 0x00000001U << DDR_PHY_VTCR1_HVIO_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_VTCR1_OFFSET ,0xFFFFFFFFU ,0x07F0018FU); + PSU_Mask_Write (DDR_PHY_VTCR1_OFFSET ,0xFFFFFFFFU ,0x07F001E3U); + /*############################################################################################################################ */ + + /*Register : ACBDLR1 @ 0XFD080544

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR1_RESERVED_31_30 0x0 + + Delay select for the BDL on Parity. + PSU_DDR_PHY_ACBDLR1_PARBD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR1_RESERVED_23_22 0x0 + + Delay select for the BDL on Address A[16]. In DDR3 mode this pin is connected to WE. + PSU_DDR_PHY_ACBDLR1_A16BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR1_RESERVED_15_14 0x0 + + Delay select for the BDL on Address A[17]. When not in DDR4 modemode this pin is connected to CAS. + PSU_DDR_PHY_ACBDLR1_A17BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR1_RESERVED_7_6 0x0 + + Delay select for the BDL on ACTN. + PSU_DDR_PHY_ACBDLR1_ACTBD 0x0 + + AC Bit Delay Line Register 1 + (OFFSET, MASK, VALUE) (0XFD080544, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_ACBDLR1_RESERVED_31_30_MASK | DDR_PHY_ACBDLR1_PARBD_MASK | DDR_PHY_ACBDLR1_RESERVED_23_22_MASK | DDR_PHY_ACBDLR1_A16BD_MASK | DDR_PHY_ACBDLR1_RESERVED_15_14_MASK | DDR_PHY_ACBDLR1_A17BD_MASK | DDR_PHY_ACBDLR1_RESERVED_7_6_MASK | DDR_PHY_ACBDLR1_ACTBD_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_ACBDLR1_RESERVED_31_30_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_PARBD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_23_22_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_A16BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_15_14_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_A17BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_7_6_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_ACTBD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_ACBDLR1_OFFSET ,0xFFFFFFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ACBDLR2 @ 0XFD080548

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR2_RESERVED_31_30 0x0 + + Delay select for the BDL on BG[1]. + PSU_DDR_PHY_ACBDLR2_BG1BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR2_RESERVED_23_22 0x0 + + Delay select for the BDL on BG[0]. + PSU_DDR_PHY_ACBDLR2_BG0BD 0x0 + + Reser.ved Return zeroes on reads. + PSU_DDR_PHY_ACBDLR2_RESERVED_15_14 0x0 + + Delay select for the BDL on BA[1]. + PSU_DDR_PHY_ACBDLR2_BA1BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR2_RESERVED_7_6 0x0 + + Delay select for the BDL on BA[0]. + PSU_DDR_PHY_ACBDLR2_BA0BD 0x0 + + AC Bit Delay Line Register 2 + (OFFSET, MASK, VALUE) (0XFD080548, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_ACBDLR2_RESERVED_31_30_MASK | DDR_PHY_ACBDLR2_BG1BD_MASK | DDR_PHY_ACBDLR2_RESERVED_23_22_MASK | DDR_PHY_ACBDLR2_BG0BD_MASK | DDR_PHY_ACBDLR2_RESERVED_15_14_MASK | DDR_PHY_ACBDLR2_BA1BD_MASK | DDR_PHY_ACBDLR2_RESERVED_7_6_MASK | DDR_PHY_ACBDLR2_BA0BD_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_ACBDLR2_RESERVED_31_30_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BG1BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_23_22_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BG0BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_15_14_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BA1BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_7_6_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BA0BD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_ACBDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U); /*############################################################################################################################ */ /*Register : ACBDLR6 @ 0XFD080558

@@ -7448,12 +7320,54 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_ACBDLR8_OFFSET ,0xFFFFFFFFU ,0x00000000U); /*############################################################################################################################ */ - /*Register : ZQCR @ 0XFD080680

+ /*Register : ACBDLR9 @ 0XFD080564

Reserved. Return zeroes on reads. - PSU_DDR_PHY_ZQCR_RESERVED_31_26 0x0 + PSU_DDR_PHY_ACBDLR9_RESERVED_31_30 0x0 - ZQ VREF Range + Delay select for the BDL on Address A[15]. + PSU_DDR_PHY_ACBDLR9_A15BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR9_RESERVED_23_22 0x0 + + Delay select for the BDL on Address A[14]. + PSU_DDR_PHY_ACBDLR9_A14BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR9_RESERVED_15_14 0x0 + + Delay select for the BDL on Address A[13]. + PSU_DDR_PHY_ACBDLR9_A13BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR9_RESERVED_7_6 0x0 + + Delay select for the BDL on Address A[12]. + PSU_DDR_PHY_ACBDLR9_A12BD 0x0 + + AC Bit Delay Line Register 9 + (OFFSET, MASK, VALUE) (0XFD080564, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_ACBDLR9_RESERVED_31_30_MASK | DDR_PHY_ACBDLR9_A15BD_MASK | DDR_PHY_ACBDLR9_RESERVED_23_22_MASK | DDR_PHY_ACBDLR9_A14BD_MASK | DDR_PHY_ACBDLR9_RESERVED_15_14_MASK | DDR_PHY_ACBDLR9_A13BD_MASK | DDR_PHY_ACBDLR9_RESERVED_7_6_MASK | DDR_PHY_ACBDLR9_A12BD_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_ACBDLR9_RESERVED_31_30_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A15BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_23_22_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A14BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_15_14_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A13BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_7_6_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A12BD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_ACBDLR9_OFFSET ,0xFFFFFFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ZQCR @ 0XFD080680

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ZQCR_RESERVED_31_26 0x0 + + ZQ VREF Range PSU_DDR_PHY_ZQCR_ZQREFISELRANGE 0x0 Programmable Wait for Frequency B @@ -7840,16 +7754,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX0GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX0GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX0GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX0GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX0GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX0GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080714, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080714, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX0GCR5_RESERVED_31_MASK | DDR_PHY_DX0GCR5_DXREFISELR3_MASK | DDR_PHY_DX0GCR5_RESERVED_23_MASK | DDR_PHY_DX0GCR5_DXREFISELR2_MASK | DDR_PHY_DX0GCR5_RESERVED_15_MASK | DDR_PHY_DX0GCR5_DXREFISELR1_MASK | DDR_PHY_DX0GCR5_RESERVED_7_MASK | DDR_PHY_DX0GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX0GCR5_RESERVED_31_SHIFT @@ -7857,11 +7771,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX0GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX0GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX0GCR6 @ 0XFD080718

@@ -8128,16 +8042,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX1GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX1GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX1GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX1GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX1GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX1GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080814, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080814, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX1GCR5_RESERVED_31_MASK | DDR_PHY_DX1GCR5_DXREFISELR3_MASK | DDR_PHY_DX1GCR5_RESERVED_23_MASK | DDR_PHY_DX1GCR5_DXREFISELR2_MASK | DDR_PHY_DX1GCR5_RESERVED_15_MASK | DDR_PHY_DX1GCR5_DXREFISELR1_MASK | DDR_PHY_DX1GCR5_RESERVED_7_MASK | DDR_PHY_DX1GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX1GCR5_RESERVED_31_SHIFT @@ -8145,11 +8059,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX1GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX1GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX1GCR6 @ 0XFD080818

@@ -8466,16 +8380,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX2GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX2GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX2GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX2GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX2GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX2GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080914, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080914, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX2GCR5_RESERVED_31_MASK | DDR_PHY_DX2GCR5_DXREFISELR3_MASK | DDR_PHY_DX2GCR5_RESERVED_23_MASK | DDR_PHY_DX2GCR5_DXREFISELR2_MASK | DDR_PHY_DX2GCR5_RESERVED_15_MASK | DDR_PHY_DX2GCR5_DXREFISELR1_MASK | DDR_PHY_DX2GCR5_RESERVED_7_MASK | DDR_PHY_DX2GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX2GCR5_RESERVED_31_SHIFT @@ -8483,11 +8397,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX2GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX2GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX2GCR6 @ 0XFD080918

@@ -8804,16 +8718,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX3GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX3GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX3GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX3GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX3GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX3GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080A14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080A14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX3GCR5_RESERVED_31_MASK | DDR_PHY_DX3GCR5_DXREFISELR3_MASK | DDR_PHY_DX3GCR5_RESERVED_23_MASK | DDR_PHY_DX3GCR5_DXREFISELR2_MASK | DDR_PHY_DX3GCR5_RESERVED_15_MASK | DDR_PHY_DX3GCR5_DXREFISELR1_MASK | DDR_PHY_DX3GCR5_RESERVED_7_MASK | DDR_PHY_DX3GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX3GCR5_RESERVED_31_SHIFT @@ -8821,11 +8735,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX3GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX3GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX3GCR6 @ 0XFD080A18

@@ -9142,16 +9056,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX4GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX4GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX4GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX4GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX4GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX4GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080B14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080B14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX4GCR5_RESERVED_31_MASK | DDR_PHY_DX4GCR5_DXREFISELR3_MASK | DDR_PHY_DX4GCR5_RESERVED_23_MASK | DDR_PHY_DX4GCR5_DXREFISELR2_MASK | DDR_PHY_DX4GCR5_RESERVED_15_MASK | DDR_PHY_DX4GCR5_DXREFISELR1_MASK | DDR_PHY_DX4GCR5_RESERVED_7_MASK | DDR_PHY_DX4GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX4GCR5_RESERVED_31_SHIFT @@ -9159,11 +9073,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX4GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX4GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX4GCR6 @ 0XFD080B18

@@ -9480,16 +9394,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX5GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX5GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX5GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX5GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX5GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX5GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080C14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080C14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX5GCR5_RESERVED_31_MASK | DDR_PHY_DX5GCR5_DXREFISELR3_MASK | DDR_PHY_DX5GCR5_RESERVED_23_MASK | DDR_PHY_DX5GCR5_DXREFISELR2_MASK | DDR_PHY_DX5GCR5_RESERVED_15_MASK | DDR_PHY_DX5GCR5_DXREFISELR1_MASK | DDR_PHY_DX5GCR5_RESERVED_7_MASK | DDR_PHY_DX5GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX5GCR5_RESERVED_31_SHIFT @@ -9497,11 +9411,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX5GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX5GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX5GCR6 @ 0XFD080C18

@@ -9818,16 +9732,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX6GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX6GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX6GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX6GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX6GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX6GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080D14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080D14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX6GCR5_RESERVED_31_MASK | DDR_PHY_DX6GCR5_DXREFISELR3_MASK | DDR_PHY_DX6GCR5_RESERVED_23_MASK | DDR_PHY_DX6GCR5_DXREFISELR2_MASK | DDR_PHY_DX6GCR5_RESERVED_15_MASK | DDR_PHY_DX6GCR5_DXREFISELR1_MASK | DDR_PHY_DX6GCR5_RESERVED_7_MASK | DDR_PHY_DX6GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX6GCR5_RESERVED_31_SHIFT @@ -9835,11 +9749,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX6GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX6GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX6GCR6 @ 0XFD080D18

@@ -10156,16 +10070,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX7GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX7GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX7GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX7GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX7GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX7GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080E14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080E14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX7GCR5_RESERVED_31_MASK | DDR_PHY_DX7GCR5_DXREFISELR3_MASK | DDR_PHY_DX7GCR5_RESERVED_23_MASK | DDR_PHY_DX7GCR5_DXREFISELR2_MASK | DDR_PHY_DX7GCR5_RESERVED_15_MASK | DDR_PHY_DX7GCR5_DXREFISELR1_MASK | DDR_PHY_DX7GCR5_RESERVED_7_MASK | DDR_PHY_DX7GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX7GCR5_RESERVED_31_SHIFT @@ -10173,11 +10087,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX7GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX7GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX7GCR6 @ 0XFD080E18

@@ -10494,16 +10408,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX8GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX8GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX8GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX8GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX8GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080F14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080F14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX8GCR5_RESERVED_31_MASK | DDR_PHY_DX8GCR5_DXREFISELR3_MASK | DDR_PHY_DX8GCR5_RESERVED_23_MASK | DDR_PHY_DX8GCR5_DXREFISELR2_MASK | DDR_PHY_DX8GCR5_RESERVED_15_MASK | DDR_PHY_DX8GCR5_DXREFISELR1_MASK | DDR_PHY_DX8GCR5_RESERVED_7_MASK | DDR_PHY_DX8GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8GCR5_RESERVED_31_SHIFT @@ -10511,11 +10425,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX8GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX8GCR6 @ 0XFD080F18

@@ -10628,6 +10542,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U); /*############################################################################################################################ */ + /*Register : DX8SL0OSC @ 0XFD081400

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL0OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL0OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL0OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL0OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL0OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL0OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL0OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL0OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL0OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL0OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL0OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL0OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL0OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL0OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL0OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL0OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL0OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL0OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL0OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081400, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL0OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL0OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL0OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL0OSC_LBMODE_MASK | DDR_PHY_DX8SL0OSC_LBGSDQS_MASK | DDR_PHY_DX8SL0OSC_LBGDQS_MASK | DDR_PHY_DX8SL0OSC_LBDQSS_MASK | DDR_PHY_DX8SL0OSC_PHYHRST_MASK | DDR_PHY_DX8SL0OSC_PHYFRST_MASK | DDR_PHY_DX8SL0OSC_DLTST_MASK | DDR_PHY_DX8SL0OSC_DLTMODE_MASK | DDR_PHY_DX8SL0OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL0OSC_OSCWDDL_MASK | DDR_PHY_DX8SL0OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL0OSC_OSCWDL_MASK | DDR_PHY_DX8SL0OSC_OSCDIV_MASK | DDR_PHY_DX8SL0OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL0OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL0OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL0OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL0OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL0OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL0DQSCTL @ 0XFD08141C

Reserved. Return zeroes on reads. @@ -10667,13 +10667,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL0DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08141C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08141C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL0DQSCTL_DXSR_MASK | DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT @@ -10688,10 +10688,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL0DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL0DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL0DXCTL2 @ 0XFD08142C

@@ -10706,7 +10706,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL0DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_17 0x0 @@ -10745,13 +10745,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD08142C, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD08142C, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL0DXCTL2_IOAG_MASK | DDR_PHY_DX8SL0DXCTL2_IOLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL0DXCTL2_RDBI_MASK | DDR_PHY_DX8SL0DXCTL2_WDBI_MASK | DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL0DXCTL2_DISRST_MASK | DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT @@ -10765,7 +10765,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL0DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL0DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL0IOCR @ 0XFD081430

@@ -10802,6 +10802,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL0IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL1OSC @ 0XFD081440

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL1OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL1OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL1OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL1OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL1OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL1OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL1OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL1OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL1OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL1OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL1OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL1OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL1OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL1OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL1OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL1OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL1OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL1OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL1OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081440, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL1OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL1OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL1OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL1OSC_LBMODE_MASK | DDR_PHY_DX8SL1OSC_LBGSDQS_MASK | DDR_PHY_DX8SL1OSC_LBGDQS_MASK | DDR_PHY_DX8SL1OSC_LBDQSS_MASK | DDR_PHY_DX8SL1OSC_PHYHRST_MASK | DDR_PHY_DX8SL1OSC_PHYFRST_MASK | DDR_PHY_DX8SL1OSC_DLTST_MASK | DDR_PHY_DX8SL1OSC_DLTMODE_MASK | DDR_PHY_DX8SL1OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL1OSC_OSCWDDL_MASK | DDR_PHY_DX8SL1OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL1OSC_OSCWDL_MASK | DDR_PHY_DX8SL1OSC_OSCDIV_MASK | DDR_PHY_DX8SL1OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL1OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL1OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL1OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL1OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL1OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL1DQSCTL @ 0XFD08145C

Reserved. Return zeroes on reads. @@ -10841,13 +10927,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL1DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08145C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08145C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL1DQSCTL_DXSR_MASK | DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT @@ -10862,10 +10948,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL1DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL1DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL1DXCTL2 @ 0XFD08146C

@@ -10880,7 +10966,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL1DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_17 0x0 @@ -10919,13 +11005,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD08146C, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD08146C, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL1DXCTL2_IOAG_MASK | DDR_PHY_DX8SL1DXCTL2_IOLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL1DXCTL2_RDBI_MASK | DDR_PHY_DX8SL1DXCTL2_WDBI_MASK | DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL1DXCTL2_DISRST_MASK | DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT @@ -10939,7 +11025,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL1DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL1DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL1IOCR @ 0XFD081470

@@ -10976,6 +11062,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL1IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL2OSC @ 0XFD081480

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL2OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL2OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL2OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL2OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL2OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL2OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL2OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL2OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL2OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL2OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL2OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL2OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL2OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL2OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL2OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL2OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL2OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL2OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL2OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081480, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL2OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL2OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL2OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL2OSC_LBMODE_MASK | DDR_PHY_DX8SL2OSC_LBGSDQS_MASK | DDR_PHY_DX8SL2OSC_LBGDQS_MASK | DDR_PHY_DX8SL2OSC_LBDQSS_MASK | DDR_PHY_DX8SL2OSC_PHYHRST_MASK | DDR_PHY_DX8SL2OSC_PHYFRST_MASK | DDR_PHY_DX8SL2OSC_DLTST_MASK | DDR_PHY_DX8SL2OSC_DLTMODE_MASK | DDR_PHY_DX8SL2OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL2OSC_OSCWDDL_MASK | DDR_PHY_DX8SL2OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL2OSC_OSCWDL_MASK | DDR_PHY_DX8SL2OSC_OSCDIV_MASK | DDR_PHY_DX8SL2OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL2OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL2OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL2OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL2OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL2OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL2DQSCTL @ 0XFD08149C

Reserved. Return zeroes on reads. @@ -11015,13 +11187,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL2DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08149C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08149C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL2DQSCTL_DXSR_MASK | DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT @@ -11036,10 +11208,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL2DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL2DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL2DXCTL2 @ 0XFD0814AC

@@ -11054,7 +11226,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL2DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_17 0x0 @@ -11093,13 +11265,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD0814AC, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD0814AC, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL2DXCTL2_IOAG_MASK | DDR_PHY_DX8SL2DXCTL2_IOLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL2DXCTL2_RDBI_MASK | DDR_PHY_DX8SL2DXCTL2_WDBI_MASK | DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL2DXCTL2_DISRST_MASK | DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT @@ -11113,7 +11285,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL2DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL2DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL2IOCR @ 0XFD0814B0

@@ -11150,6 +11322,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL2IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL3OSC @ 0XFD0814C0

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL3OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL3OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL3OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL3OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL3OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL3OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL3OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL3OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL3OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL3OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL3OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL3OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL3OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL3OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL3OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL3OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL3OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL3OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL3OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD0814C0, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL3OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL3OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL3OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL3OSC_LBMODE_MASK | DDR_PHY_DX8SL3OSC_LBGSDQS_MASK | DDR_PHY_DX8SL3OSC_LBGDQS_MASK | DDR_PHY_DX8SL3OSC_LBDQSS_MASK | DDR_PHY_DX8SL3OSC_PHYHRST_MASK | DDR_PHY_DX8SL3OSC_PHYFRST_MASK | DDR_PHY_DX8SL3OSC_DLTST_MASK | DDR_PHY_DX8SL3OSC_DLTMODE_MASK | DDR_PHY_DX8SL3OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL3OSC_OSCWDDL_MASK | DDR_PHY_DX8SL3OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL3OSC_OSCWDL_MASK | DDR_PHY_DX8SL3OSC_OSCDIV_MASK | DDR_PHY_DX8SL3OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL3OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL3OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL3OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL3OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL3OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL3DQSCTL @ 0XFD0814DC

Reserved. Return zeroes on reads. @@ -11189,13 +11447,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL3DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD0814DC, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD0814DC, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL3DQSCTL_DXSR_MASK | DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT @@ -11210,10 +11468,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL3DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL3DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL3DXCTL2 @ 0XFD0814EC

@@ -11228,7 +11486,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL3DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_17 0x0 @@ -11267,13 +11525,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD0814EC, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD0814EC, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL3DXCTL2_IOAG_MASK | DDR_PHY_DX8SL3DXCTL2_IOLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL3DXCTL2_RDBI_MASK | DDR_PHY_DX8SL3DXCTL2_WDBI_MASK | DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL3DXCTL2_DISRST_MASK | DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT @@ -11287,7 +11545,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL3DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL3DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL3IOCR @ 0XFD0814F0

@@ -11324,6 +11582,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL3IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL4OSC @ 0XFD081500

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL4OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL4OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL4OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL4OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL4OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL4OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL4OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL4OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL4OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL4OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL4OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL4OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL4OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL4OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL4OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL4OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL4OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL4OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL4OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081500, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL4OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL4OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL4OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL4OSC_LBMODE_MASK | DDR_PHY_DX8SL4OSC_LBGSDQS_MASK | DDR_PHY_DX8SL4OSC_LBGDQS_MASK | DDR_PHY_DX8SL4OSC_LBDQSS_MASK | DDR_PHY_DX8SL4OSC_PHYHRST_MASK | DDR_PHY_DX8SL4OSC_PHYFRST_MASK | DDR_PHY_DX8SL4OSC_DLTST_MASK | DDR_PHY_DX8SL4OSC_DLTMODE_MASK | DDR_PHY_DX8SL4OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL4OSC_OSCWDDL_MASK | DDR_PHY_DX8SL4OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL4OSC_OSCWDL_MASK | DDR_PHY_DX8SL4OSC_OSCDIV_MASK | DDR_PHY_DX8SL4OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL4OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL4OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL4OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL4OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL4OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL4DQSCTL @ 0XFD08151C

Reserved. Return zeroes on reads. @@ -11363,13 +11707,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL4DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08151C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08151C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL4DQSCTL_DXSR_MASK | DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT @@ -11384,10 +11728,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL4DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL4DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL4DXCTL2 @ 0XFD08152C

@@ -11402,7 +11746,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL4DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_17 0x0 @@ -11441,13 +11785,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD08152C, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD08152C, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL4DXCTL2_IOAG_MASK | DDR_PHY_DX8SL4DXCTL2_IOLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL4DXCTL2_RDBI_MASK | DDR_PHY_DX8SL4DXCTL2_WDBI_MASK | DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL4DXCTL2_DISRST_MASK | DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT @@ -11461,7 +11805,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL4DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL4DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL4IOCR @ 0XFD081530

@@ -12515,7 +12859,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper) - PSU_IOU_SLCR_MIO_PIN_26_L2_SEL 1 + PSU_IOU_SLCR_MIO_PIN_26_L2_SEL 0 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal @@ -12525,15 +12869,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_26_L3_SEL 0 Configures MIO Pin 26 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180068, 0x000000FEU ,0x00000008U) + (OFFSET, MASK, VALUE) (0XFF180068, 0x000000FEU ,0x00000000U) RegMask = (IOU_SLCR_MIO_PIN_26_L0_SEL_MASK | IOU_SLCR_MIO_PIN_26_L1_SEL_MASK | IOU_SLCR_MIO_PIN_26_L2_SEL_MASK | IOU_SLCR_MIO_PIN_26_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT - | 0x00000001U << IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT + | 0x00000000U << IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_26_OFFSET ,0x000000FEU ,0x00000008U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_26_OFFSET ,0x000000FEU ,0x00000000U); /*############################################################################################################################ */ /*Register : MIO_PIN_27 @ 0XFF18006C

@@ -12547,7 +12891,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp t, dp_aux_data_out- (Dp Aux Data) - PSU_IOU_SLCR_MIO_PIN_27_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_27_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa @@ -12557,15 +12901,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_27_L3_SEL 0 Configures MIO Pin 27 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF18006C, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF18006C, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_27_L0_SEL_MASK | IOU_SLCR_MIO_PIN_27_L1_SEL_MASK | IOU_SLCR_MIO_PIN_27_L2_SEL_MASK | IOU_SLCR_MIO_PIN_27_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_27_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_27_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_28 @ 0XFF180070

@@ -12578,7 +12922,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug) - PSU_IOU_SLCR_MIO_PIN_28_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_28_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa @@ -12587,15 +12931,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_28_L3_SEL 0 Configures MIO Pin 28 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180070, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF180070, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_28_L0_SEL_MASK | IOU_SLCR_MIO_PIN_28_L1_SEL_MASK | IOU_SLCR_MIO_PIN_28_L2_SEL_MASK | IOU_SLCR_MIO_PIN_28_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_28_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_28_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_29 @ 0XFF180074

@@ -12609,7 +12953,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp t, dp_aux_data_out- (Dp Aux Data) - PSU_IOU_SLCR_MIO_PIN_29_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_29_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal @@ -12619,15 +12963,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_29_L3_SEL 0 Configures MIO Pin 29 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180074, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF180074, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_29_L0_SEL_MASK | IOU_SLCR_MIO_PIN_29_L1_SEL_MASK | IOU_SLCR_MIO_PIN_29_L2_SEL_MASK | IOU_SLCR_MIO_PIN_29_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_29_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_29_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_30 @ 0XFF180078

@@ -12640,7 +12984,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug) - PSU_IOU_SLCR_MIO_PIN_30_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_30_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal @@ -12650,15 +12994,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_30_L3_SEL 0 Configures MIO Pin 30 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180078, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF180078, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_30_L0_SEL_MASK | IOU_SLCR_MIO_PIN_30_L1_SEL_MASK | IOU_SLCR_MIO_PIN_30_L2_SEL_MASK | IOU_SLCR_MIO_PIN_30_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_30_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_30_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_31 @ 0XFF18007C

@@ -14189,25 +14533,25 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI 1 Master Tri-state Enable for pin 26, active high - PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI 1 + PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI 0 Master Tri-state Enable for pin 27, active high PSU_IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI 0 Master Tri-state Enable for pin 28, active high - PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI 0 + PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI 1 Master Tri-state Enable for pin 29, active high PSU_IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI 0 Master Tri-state Enable for pin 30, active high - PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI 0 + PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI 1 Master Tri-state Enable for pin 31, active high PSU_IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI 0 MIO pin Tri-state Enables, 31:0 - (OFFSET, MASK, VALUE) (0XFF180204, 0xFFFFFFFFU ,0x06240000U) + (OFFSET, MASK, VALUE) (0XFF180204, 0xFFFFFFFFU ,0x52240000U) RegMask = (IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT @@ -14236,14 +14580,14 @@ unsigned long psu_mio_init_data() { | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT - | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT + | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT - | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT + | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT - | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT + | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI0_OFFSET ,0xFFFFFFFFU ,0x06240000U); + PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI0_OFFSET ,0xFFFFFFFFU ,0x52240000U); /*############################################################################################################################ */ /*Register : MIO_MST_TRI1 @ 0XFF180208

@@ -16538,6 +16882,21 @@ unsigned long psu_mio_init_data() { } unsigned long psu_peripherals_init_data() { // : RESET BLOCKS + // : TIMESTAMP + /*Register : RST_LPD_IOU2 @ 0XFF5E0238

+ + Block level reset + PSU_CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET 0 + + Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset. + (OFFSET, MASK, VALUE) (0XFF5E0238, 0x00100000U ,0x00000000U) + RegMask = (CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_MASK | 0 ); + + RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00100000U ,0x00000000U); + /*############################################################################################################################ */ + // : ENET /*Register : RST_LPD_IOU0 @ 0XFF5E0230

@@ -16568,6 +16927,21 @@ unsigned long psu_peripherals_init_data() { PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000001U ,0x00000000U); /*############################################################################################################################ */ + // : QSPI TAP DELAY + /*Register : IOU_TAPDLY_BYPASS @ 0XFF180390

+ + 0: Do not by pass the tap delays on the Rx clock signal of LQSPI 1: Bypass the Tap delay on the Rx clock signal of LQSPI + PSU_IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX 1 + + IOU tap delay bypass for the LQSPI and NAND controllers + (OFFSET, MASK, VALUE) (0XFF180390, 0x00000004U ,0x00000004U) + RegMask = (IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_MASK | 0 ); + + RegVal = ((0x00000001U << IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SLCR_IOU_TAPDLY_BYPASS_OFFSET ,0x00000004U ,0x00000004U); + /*############################################################################################################################ */ + // : NAND // : USB /*Register : RST_LPD_TOP @ 0XFF5E023C

@@ -16718,6 +17092,23 @@ unsigned long psu_peripherals_init_data() { PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG1_OFFSET ,0x7F800000U ,0x63800000U); /*############################################################################################################################ */ + // : SD1 RETUNER + /*Register : SD_CONFIG_REG3 @ 0XFF180324

+ + This is the Timer Count for Re-Tuning Timer for Re-Tuning Mode 1 to 3. Setting to 4'b0 disables Re-Tuning Timer. 0h - Get inf + rmation via other source 1h = 1 seconds 2h = 2 seconds 3h = 4 seconds 4h = 8 seconds -- n = 2(n-1) seconds -- Bh = 1024 secon + s Fh - Ch = Reserved + PSU_IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR 0X0 + + SD Config Register 3 + (OFFSET, MASK, VALUE) (0XFF180324, 0x03C00000U ,0x00000000U) + RegMask = (IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_MASK | 0 ); + + RegVal = ((0x00000000U << IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG3_OFFSET ,0x03C00000U ,0x00000000U); + /*############################################################################################################################ */ + // : CAN /*Register : RST_LPD_IOU2 @ 0XFF5E0238

@@ -17158,6 +17549,37 @@ unsigned long psu_peripherals_init_data() { PSU_Mask_Write (RTC_CONTROL_OFFSET ,0x80000000U ,0x80000000U); /*############################################################################################################################ */ + // : TIMESTAMP COUNTER + /*Register : base_frequency_ID_register @ 0XFF260020

+ + Frequency in number of ticks per second. Valid range from 10 MHz to 100 MHz. + PSU_IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ 0x5f5e100 + + Program this register to match the clock frequency of the timestamp generator, in ticks per second. For example, for a 50 MHz + clock, program 0x02FAF080. This register is not accessible to the read-only programming interface. + (OFFSET, MASK, VALUE) (0XFF260020, 0xFFFFFFFFU ,0x05F5E100U) + RegMask = (IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_MASK | 0 ); + + RegVal = ((0x05F5E100U << IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_OFFSET ,0xFFFFFFFFU ,0x05F5E100U); + /*############################################################################################################################ */ + + /*Register : counter_control_register @ 0XFF260000

+ + Enable 0: The counter is disabled and not incrementing. 1: The counter is enabled and is incrementing. + PSU_IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN 0x1 + + Controls the counter increments. This register is not accessible to the read-only programming interface. + (OFFSET, MASK, VALUE) (0XFF260000, 0x00000001U ,0x00000001U) + RegMask = (IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_MASK | 0 ); + + RegVal = ((0x00000001U << IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SCNTRS_COUNTER_CONTROL_REGISTER_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + // : TTC SRC SELECT return 1; } @@ -17172,6 +17594,98 @@ unsigned long psu_peripherals_powerdwn_data() { return 1; } +unsigned long psu_lpd_xppu_data() { + // : XPPU INTERRUPT ENABLE + /*Register : IEN @ 0XFF980018

+ + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_APER_PARITY 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_APER_TZ 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_APER_PERM 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_MID_PARITY 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_MID_RO 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_MID_MISS 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_INV_APB 0X1 + + Interrupt Enable Register + (OFFSET, MASK, VALUE) (0XFF980018, 0x000000EFU ,0x000000EFU) + RegMask = (LPD_XPPU_CFG_IEN_APER_PARITY_MASK | LPD_XPPU_CFG_IEN_APER_TZ_MASK | LPD_XPPU_CFG_IEN_APER_PERM_MASK | LPD_XPPU_CFG_IEN_MID_PARITY_MASK | LPD_XPPU_CFG_IEN_MID_RO_MASK | LPD_XPPU_CFG_IEN_MID_MISS_MASK | LPD_XPPU_CFG_IEN_INV_APB_MASK | 0 ); + + RegVal = ((0x00000001U << LPD_XPPU_CFG_IEN_APER_PARITY_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_APER_TZ_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_APER_PERM_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_MID_PARITY_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_MID_RO_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_MID_MISS_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_INV_APB_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (LPD_XPPU_CFG_IEN_OFFSET ,0x000000EFU ,0x000000EFU); + /*############################################################################################################################ */ + + + return 1; +} +unsigned long psu_ddr_xmpu0_data() { + + return 1; +} +unsigned long psu_ddr_xmpu1_data() { + + return 1; +} +unsigned long psu_ddr_xmpu2_data() { + + return 1; +} +unsigned long psu_ddr_xmpu3_data() { + + return 1; +} +unsigned long psu_ddr_xmpu4_data() { + + return 1; +} +unsigned long psu_ddr_xmpu5_data() { + + return 1; +} +unsigned long psu_ocm_xmpu_data() { + + return 1; +} +unsigned long psu_fpd_xmpu_data() { + + return 1; +} +unsigned long psu_protection_lock_data() { + + return 1; +} +unsigned long psu_apply_master_tz() { + // : RPU + // : DP TZ + // : SATA TZ + // : PCIE TZ + // : USB TZ + // : SD TZ + // : GEM TZ + // : QSPI TZ + // : NAND TZ + + return 1; +} unsigned long psu_serdes_init_data() { // : SERDES INITIALIZATION // : GT REFERENCE CLOCK SOURCE SELECTION @@ -17350,99 +17864,99 @@ unsigned long psu_serdes_init_data() { /*Register : L3_PLL_SS_STEPS_0_LSB @ 0XFD40E368

Spread Spectrum No of Steps [7:0] - PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x0 + PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0xE0 Spread Spectrum No of Steps bits 7:0 - (OFFSET, MASK, VALUE) (0XFD40E368, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E368, 0x000000FFU ,0x000000E0U) RegMask = (SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT + RegVal = ((0x000000E0U << SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x000000E0U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEPS_1_MSB @ 0XFD40E36C

Spread Spectrum No of Steps [10:8] - PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x0 + PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x3 Spread Spectrum No of Steps bits 10:8 - (OFFSET, MASK, VALUE) (0XFD40E36C, 0x00000007U ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E36C, 0x00000007U ,0x00000003U) RegMask = (SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT + RegVal = ((0x00000003U << SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEPS_0_LSB @ 0XFD406368

Spread Spectrum No of Steps [7:0] - PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x0 + PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x58 Spread Spectrum No of Steps bits 7:0 - (OFFSET, MASK, VALUE) (0XFD406368, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406368, 0x000000FFU ,0x00000058U) RegMask = (SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT + RegVal = ((0x00000058U << SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000058U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEPS_1_MSB @ 0XFD40636C

Spread Spectrum No of Steps [10:8] - PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x0 + PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x3 Spread Spectrum No of Steps bits 10:8 - (OFFSET, MASK, VALUE) (0XFD40636C, 0x00000007U ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40636C, 0x00000007U ,0x00000003U) RegMask = (SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT + RegVal = ((0x00000003U << SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_0_LSB @ 0XFD406370

Step Size for Spread Spectrum [7:0] - PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x0 + PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x7C Step Size for Spread Spectrum LSB - (OFFSET, MASK, VALUE) (0XFD406370, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406370, 0x000000FFU ,0x0000007CU) RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT + RegVal = ((0x0000007CU << SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x0000007CU); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_1 @ 0XFD406374

Step Size for Spread Spectrum [15:8] - PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x0 + PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x33 Step Size for Spread Spectrum 1 - (OFFSET, MASK, VALUE) (0XFD406374, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406374, 0x000000FFU ,0x00000033U) RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT + RegVal = ((0x00000033U << SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000033U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_2 @ 0XFD406378

Step Size for Spread Spectrum [23:16] - PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x0 + PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x2 Step Size for Spread Spectrum 2 - (OFFSET, MASK, VALUE) (0XFD406378, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406378, 0x000000FFU ,0x00000002U) RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT + RegVal = ((0x00000002U << SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000002U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40637C

@@ -17534,43 +18048,43 @@ unsigned long psu_serdes_init_data() { /*Register : L3_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40E370

Step Size for Spread Spectrum [7:0] - PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x0 + PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0xC9 Step Size for Spread Spectrum LSB - (OFFSET, MASK, VALUE) (0XFD40E370, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E370, 0x000000FFU ,0x000000C9U) RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT + RegVal = ((0x000000C9U << SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x000000C9U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEP_SIZE_1 @ 0XFD40E374

Step Size for Spread Spectrum [15:8] - PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x0 + PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0xD2 Step Size for Spread Spectrum 1 - (OFFSET, MASK, VALUE) (0XFD40E374, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E374, 0x000000FFU ,0x000000D2U) RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT + RegVal = ((0x000000D2U << SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x000000D2U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEP_SIZE_2 @ 0XFD40E378

Step Size for Spread Spectrum [23:16] - PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x0 + PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x1 Step Size for Spread Spectrum 2 - (OFFSET, MASK, VALUE) (0XFD40E378, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E378, 0x000000FFU ,0x00000001U) RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT + RegVal = ((0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000001U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40E37C

@@ -17711,38 +18225,883 @@ unsigned long psu_serdes_init_data() { PSU_Mask_Write (SERDES_L3_TXPMA_ST_0_OFFSET ,0x000000F0U ,0x000000F0U); /*############################################################################################################################ */ - // : GT LANE SETTINGS - /*Register : ICM_CFG0 @ 0XFD410010

- - Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse - , 7 - Unused - PSU_SERDES_ICM_CFG0_L0_ICM_CFG 1 + // : ENABLE CHICKEN BIT FOR PCIE AND USB + /*Register : L0_TM_AUX_0 @ 0XFD4010CC

- Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused - 7 - Unused - PSU_SERDES_ICM_CFG0_L1_ICM_CFG 4 + Spare- not used + PSU_SERDES_L0_TM_AUX_0_BIT_2 1 - ICM Configuration Register 0 - (OFFSET, MASK, VALUE) (0XFD410010, 0x00000077U ,0x00000041U) - RegMask = (SERDES_ICM_CFG0_L0_ICM_CFG_MASK | SERDES_ICM_CFG0_L1_ICM_CFG_MASK | 0 ); + Spare registers + (OFFSET, MASK, VALUE) (0XFD4010CC, 0x00000020U ,0x00000020U) + RegMask = (SERDES_L0_TM_AUX_0_BIT_2_MASK | 0 ); - RegVal = ((0x00000001U << SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT - | 0x00000004U << SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT + RegVal = ((0x00000001U << SERDES_L0_TM_AUX_0_BIT_2_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_ICM_CFG0_OFFSET ,0x00000077U ,0x00000041U); + PSU_Mask_Write (SERDES_L0_TM_AUX_0_OFFSET ,0x00000020U ,0x00000020U); /*############################################################################################################################ */ - /*Register : ICM_CFG1 @ 0XFD410014

+ /*Register : L2_TM_AUX_0 @ 0XFD4090CC

- Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused - 7 - Unused - PSU_SERDES_ICM_CFG1_L2_ICM_CFG 3 + Spare- not used + PSU_SERDES_L2_TM_AUX_0_BIT_2 1 - Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused - 7 - Unused - PSU_SERDES_ICM_CFG1_L3_ICM_CFG 2 + Spare registers + (OFFSET, MASK, VALUE) (0XFD4090CC, 0x00000020U ,0x00000020U) + RegMask = (SERDES_L2_TM_AUX_0_BIT_2_MASK | 0 ); - ICM Configuration Register 1 + RegVal = ((0x00000001U << SERDES_L2_TM_AUX_0_BIT_2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_AUX_0_OFFSET ,0x00000020U ,0x00000020U); + /*############################################################################################################################ */ + + // : ENABLING EYE SURF + /*Register : L0_TM_DIG_8 @ 0XFD401074

+ + Enable Eye Surf + PSU_SERDES_L0_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD401074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L0_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L1_TM_DIG_8 @ 0XFD405074

+ + Enable Eye Surf + PSU_SERDES_L1_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD405074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L1_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L2_TM_DIG_8 @ 0XFD409074

+ + Enable Eye Surf + PSU_SERDES_L2_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD409074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L2_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L3_TM_DIG_8 @ 0XFD40D074

+ + Enable Eye Surf + PSU_SERDES_L3_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD40D074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L3_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + // : ILL SETTINGS FOR GAIN AND LOCK SETTINGS + /*Register : L0_TM_MISC2 @ 0XFD40189C

+ + ILL calib counts BYPASSED with calcode bits + PSU_SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + sampler cal + (OFFSET, MASK, VALUE) (0XFD40189C, 0x00000080U ,0x00000080U) + RegMask = (SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL1 @ 0XFD4018F8

+ + IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x64 + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4018F8, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL2 @ 0XFD4018FC

+ + IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x64 + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4018FC, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L0_TM_ILL12 @ 0XFD401990

+ + G1A pll ctr bypass value + PSU_SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x11 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD401990, 0x000000FFU ,0x00000011U) + RegMask = (SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000011U << SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ILL12_OFFSET ,0x000000FFU ,0x00000011U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL1 @ 0XFD401924

+ + E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0x4 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD401924, 0x000000FFU ,0x00000004U) + RegMask = (SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x00000004U << SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL1_OFFSET ,0x000000FFU ,0x00000004U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL2 @ 0XFD401928

+ + E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0xFE + + epi cal code + (OFFSET, MASK, VALUE) (0XFD401928, 0x000000FFU ,0x000000FEU) + RegMask = (SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x000000FEU << SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL2_OFFSET ,0x000000FFU ,0x000000FEU); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL3 @ 0XFD401900

+ + IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x64 + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD401900, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL3 @ 0XFD40192C

+ + E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x0 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40192C, 0x000000FFU ,0x00000000U) + RegMask = (SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000000U << SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : L0_TM_ILL8 @ 0XFD401980

+ + ILL calibration code change wait time + PSU_SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + ILL cal routine control + (OFFSET, MASK, VALUE) (0XFD401980, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL8 @ 0XFD401914

+ + IQ ILL polytrim bypass value + PSU_SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + iqpi polytrim + (OFFSET, MASK, VALUE) (0XFD401914, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL9 @ 0XFD401918

+ + bypass IQ polytrim + PSU_SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD401918, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL8 @ 0XFD401940

+ + E ILL polytrim bypass value + PSU_SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + epi polytrim + (OFFSET, MASK, VALUE) (0XFD401940, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL9 @ 0XFD401944

+ + bypass E polytrim + PSU_SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD401944, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L2_TM_MISC2 @ 0XFD40989C

+ + ILL calib counts BYPASSED with calcode bits + PSU_SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + sampler cal + (OFFSET, MASK, VALUE) (0XFD40989C, 0x00000080U ,0x00000080U) + RegMask = (SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL1 @ 0XFD4098F8

+ + IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x1A + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4098F8, 0x000000FFU ,0x0000001AU) + RegMask = (SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x0000001AU); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL2 @ 0XFD4098FC

+ + IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x1A + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4098FC, 0x000000FFU ,0x0000001AU) + RegMask = (SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x0000001AU); + /*############################################################################################################################ */ + + /*Register : L2_TM_ILL12 @ 0XFD409990

+ + G1A pll ctr bypass value + PSU_SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x10 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD409990, 0x000000FFU ,0x00000010U) + RegMask = (SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000010U << SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ILL12_OFFSET ,0x000000FFU ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL1 @ 0XFD409924

+ + E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0xFE + + epi cal code + (OFFSET, MASK, VALUE) (0XFD409924, 0x000000FFU ,0x000000FEU) + RegMask = (SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x000000FEU << SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL1_OFFSET ,0x000000FFU ,0x000000FEU); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL2 @ 0XFD409928

+ + E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0x0 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD409928, 0x000000FFU ,0x00000000U) + RegMask = (SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x00000000U << SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL2_OFFSET ,0x000000FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL3 @ 0XFD409900

+ + IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x1A + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD409900, 0x000000FFU ,0x0000001AU) + RegMask = (SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x0000001AU); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL3 @ 0XFD40992C

+ + E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x0 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40992C, 0x000000FFU ,0x00000000U) + RegMask = (SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000000U << SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : L2_TM_ILL8 @ 0XFD409980

+ + ILL calibration code change wait time + PSU_SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + ILL cal routine control + (OFFSET, MASK, VALUE) (0XFD409980, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL8 @ 0XFD409914

+ + IQ ILL polytrim bypass value + PSU_SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + iqpi polytrim + (OFFSET, MASK, VALUE) (0XFD409914, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL9 @ 0XFD409918

+ + bypass IQ polytrim + PSU_SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD409918, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL8 @ 0XFD409940

+ + E ILL polytrim bypass value + PSU_SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + epi polytrim + (OFFSET, MASK, VALUE) (0XFD409940, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL9 @ 0XFD409944

+ + bypass E polytrim + PSU_SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD409944, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TM_MISC2 @ 0XFD40D89C

+ + ILL calib counts BYPASSED with calcode bits + PSU_SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + sampler cal + (OFFSET, MASK, VALUE) (0XFD40D89C, 0x00000080U ,0x00000080U) + RegMask = (SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL1 @ 0XFD40D8F8

+ + IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x7D + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD40D8F8, 0x000000FFU ,0x0000007DU) + RegMask = (SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x0000007DU); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL2 @ 0XFD40D8FC

+ + IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x7D + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD40D8FC, 0x000000FFU ,0x0000007DU) + RegMask = (SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x0000007DU); + /*############################################################################################################################ */ + + /*Register : L3_TM_ILL12 @ 0XFD40D990

+ + G1A pll ctr bypass value + PSU_SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x1 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD40D990, 0x000000FFU ,0x00000001U) + RegMask = (SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ILL12_OFFSET ,0x000000FFU ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL1 @ 0XFD40D924

+ + E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0x9C + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40D924, 0x000000FFU ,0x0000009CU) + RegMask = (SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x0000009CU << SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL1_OFFSET ,0x000000FFU ,0x0000009CU); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL2 @ 0XFD40D928

+ + E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0x39 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40D928, 0x000000FFU ,0x00000039U) + RegMask = (SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x00000039U << SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL2_OFFSET ,0x000000FFU ,0x00000039U); + /*############################################################################################################################ */ + + /*Register : L3_TM_ILL11 @ 0XFD40D98C

+ + G2A_PCIe1 PLL ctr bypass value + PSU_SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL 0x2 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD40D98C, 0x000000F0U ,0x00000020U) + RegMask = (SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000002U << SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ILL11_OFFSET ,0x000000F0U ,0x00000020U); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL3 @ 0XFD40D900

+ + IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x7D + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD40D900, 0x000000FFU ,0x0000007DU) + RegMask = (SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x0000007DU); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL3 @ 0XFD40D92C

+ + E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x64 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40D92C, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L3_TM_ILL8 @ 0XFD40D980

+ + ILL calibration code change wait time + PSU_SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + ILL cal routine control + (OFFSET, MASK, VALUE) (0XFD40D980, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL8 @ 0XFD40D914

+ + IQ ILL polytrim bypass value + PSU_SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + iqpi polytrim + (OFFSET, MASK, VALUE) (0XFD40D914, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL9 @ 0XFD40D918

+ + bypass IQ polytrim + PSU_SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD40D918, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL8 @ 0XFD40D940

+ + E ILL polytrim bypass value + PSU_SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + epi polytrim + (OFFSET, MASK, VALUE) (0XFD40D940, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL9 @ 0XFD40D944

+ + bypass E polytrim + PSU_SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD40D944, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + // : SYMBOL LOCK AND WAIT + /*Register : L0_TM_DIG_21 @ 0XFD4010A8

+ + pre lock comma count threshold. 2'b 00 : 3, 2'b 01 : 5, 2'b 10 : 10, 2'b 11 : 20 + PSU_SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH 0x11 + + Control symbol alignment locking - wait counts + (OFFSET, MASK, VALUE) (0XFD4010A8, 0x00000003U ,0x00000003U) + RegMask = (SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_MASK | 0 ); + + RegVal = ((0x00000011U << SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_DIG_21_OFFSET ,0x00000003U ,0x00000003U); + /*############################################################################################################################ */ + + /*Register : L0_TM_DIG_10 @ 0XFD40107C

+ + CDR lock wait time. (1-16 us). cdr_lock_wait_time = 4'b xxxx + 4'b 0001 + PSU_SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME 0xF + + test control for changing cdr lock wait time + (OFFSET, MASK, VALUE) (0XFD40107C, 0x0000000FU ,0x0000000FU) + RegMask = (SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_MASK | 0 ); + + RegVal = ((0x0000000FU << SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_DIG_10_OFFSET ,0x0000000FU ,0x0000000FU); + /*############################################################################################################################ */ + + // : SIOU SETTINGS FOR BYPASS CONTROL,HSRX-DIG + /*Register : L0_TM_RST_DLY @ 0XFD4019A4

+ + Delay apb reset by specified amount + PSU_SERDES_L0_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD4019A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L0_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L0_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L0_TM_ANA_BYP_15 @ 0XFD401038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD401038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L0_TM_ANA_BYP_12 @ 0XFD40102C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40102C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L1_TM_RST_DLY @ 0XFD4059A4

+ + Delay apb reset by specified amount + PSU_SERDES_L1_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD4059A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L1_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L1_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L1_TM_ANA_BYP_15 @ 0XFD405038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD405038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L1_TM_ANA_BYP_12 @ 0XFD40502C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40502C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L2_TM_RST_DLY @ 0XFD4099A4

+ + Delay apb reset by specified amount + PSU_SERDES_L2_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD4099A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L2_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L2_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L2_TM_ANA_BYP_15 @ 0XFD409038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD409038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L2_TM_ANA_BYP_12 @ 0XFD40902C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40902C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L3_TM_RST_DLY @ 0XFD40D9A4

+ + Delay apb reset by specified amount + PSU_SERDES_L3_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD40D9A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L3_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L3_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L3_TM_ANA_BYP_15 @ 0XFD40D038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD40D038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L3_TM_ANA_BYP_12 @ 0XFD40D02C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40D02C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + // : GT LANE SETTINGS + /*Register : ICM_CFG0 @ 0XFD410010

+ + Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse + , 7 - Unused + PSU_SERDES_ICM_CFG0_L0_ICM_CFG 1 + + Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused + 7 - Unused + PSU_SERDES_ICM_CFG0_L1_ICM_CFG 4 + + ICM Configuration Register 0 + (OFFSET, MASK, VALUE) (0XFD410010, 0x00000077U ,0x00000041U) + RegMask = (SERDES_ICM_CFG0_L0_ICM_CFG_MASK | SERDES_ICM_CFG0_L1_ICM_CFG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT + | 0x00000004U << SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_ICM_CFG0_OFFSET ,0x00000077U ,0x00000041U); + /*############################################################################################################################ */ + + /*Register : ICM_CFG1 @ 0XFD410014

+ + Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused + 7 - Unused + PSU_SERDES_ICM_CFG1_L2_ICM_CFG 3 + + Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused + 7 - Unused + PSU_SERDES_ICM_CFG1_L3_ICM_CFG 2 + + ICM Configuration Register 1 (OFFSET, MASK, VALUE) (0XFD410014, 0x00000077U ,0x00000023U) RegMask = (SERDES_ICM_CFG1_L2_ICM_CFG_MASK | SERDES_ICM_CFG1_L3_ICM_CFG_MASK | 0 ); @@ -17756,48 +19115,128 @@ unsigned long psu_serdes_init_data() { // : ENABLE SERIAL DATA MUX DEEMPH /*Register : L1_TXPMD_TM_45 @ 0XFD404CB4

- Enable/disable DP post2 path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH 0x1 + Enable/disable DP post2 path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH 0x1 + + Override enable/disable of DP post2 path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH 0x1 + + Override enable/disable of DP post1 path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH 0x1 + + Enable/disable DP main path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH 0x1 + + Override enable/disable of DP main path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH 0x1 + + Post or pre or main DP path selection + (OFFSET, MASK, VALUE) (0XFD404CB4, 0x00000037U ,0x00000037U) + RegMask = (SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TXPMD_TM_45_OFFSET ,0x00000037U ,0x00000037U); + /*############################################################################################################################ */ + + /*Register : L1_TX_ANA_TM_118 @ 0XFD4041D8

+ + Test register force for enabling/disablign TX deemphasis bits <17:0> + PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0 0x1 + + Enable Override of TX deemphasis + (OFFSET, MASK, VALUE) (0XFD4041D8, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TX_ANA_TM_118 @ 0XFD40C1D8

+ + Test register force for enabling/disablign TX deemphasis bits <17:0> + PSU_SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0 0x1 + + Enable Override of TX deemphasis + (OFFSET, MASK, VALUE) (0XFD40C1D8, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + // : CDR AND RX EQUALIZATION SETTINGS + /*Register : L3_TM_CDR5 @ 0XFD40DC14

+ + FPHL FSM accumulate cycles + PSU_SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES 0x7 + + FFL Phase0 int gain aka 2ol SD update rate + PSU_SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN 0x6 + + Fast phase lock controls -- FSM accumulator cycle control and phase 0 int gain control. + (OFFSET, MASK, VALUE) (0XFD40DC14, 0x000000FFU ,0x000000E6U) + RegMask = (SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_MASK | SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_MASK | 0 ); + + RegVal = ((0x00000007U << SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_SHIFT + | 0x00000006U << SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_CDR5_OFFSET ,0x000000FFU ,0x000000E6U); + /*############################################################################################################################ */ + + /*Register : L3_TM_CDR16 @ 0XFD40DC40

+ + FFL Phase0 prop gain aka 1ol SD update rate + PSU_SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN 0xC - Override enable/disable of DP post2 path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH 0x1 + Fast phase lock controls -- phase 0 prop gain + (OFFSET, MASK, VALUE) (0XFD40DC40, 0x0000001FU ,0x0000000CU) + RegMask = (SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_MASK | 0 ); - Override enable/disable of DP post1 path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH 0x1 + RegVal = ((0x0000000CU << SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_CDR16_OFFSET ,0x0000001FU ,0x0000000CU); + /*############################################################################################################################ */ - Enable/disable DP main path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH 0x1 + /*Register : L3_TM_EQ0 @ 0XFD40D94C

- Override enable/disable of DP main path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH 0x1 + EQ stg 2 controls BYPASSED + PSU_SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP 1 - Post or pre or main DP path selection - (OFFSET, MASK, VALUE) (0XFD404CB4, 0x00000037U ,0x00000037U) - RegMask = (SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK | 0 ); + eq stg1 and stg2 controls + (OFFSET, MASK, VALUE) (0XFD40D94C, 0x00000020U ,0x00000020U) + RegMask = (SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_MASK | 0 ); - RegVal = ((0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT + RegVal = ((0x00000001U << SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_TXPMD_TM_45_OFFSET ,0x00000037U ,0x00000037U); + PSU_Mask_Write (SERDES_L3_TM_EQ0_OFFSET ,0x00000020U ,0x00000020U); /*############################################################################################################################ */ - /*Register : L1_TX_ANA_TM_118 @ 0XFD4041D8

+ /*Register : L3_TM_EQ1 @ 0XFD40D950

- Test register force for enabling/disablign TX deemphasis bits <17:0> - PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0 0x1 + EQ STG2 RL PROG + PSU_SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG 0x2 - Enable Override of TX deemphasis - (OFFSET, MASK, VALUE) (0XFD4041D8, 0x00000001U ,0x00000001U) - RegMask = (SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK | 0 ); + EQ stg 2 preamp mode val + PSU_SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL 0x1 - RegVal = ((0x00000001U << SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT + eq stg1 and stg2 controls + (OFFSET, MASK, VALUE) (0XFD40D950, 0x00000007U ,0x00000006U) + RegMask = (SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_MASK | SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_MASK | 0 ); + + RegVal = ((0x00000002U << SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_SHIFT + | 0x00000001U << SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U); + PSU_Mask_Write (SERDES_L3_TM_EQ1_OFFSET ,0x00000007U ,0x00000006U); /*############################################################################################################################ */ + // : GEM SERDES SETTINGS // : ENABLE PRE EMPHAIS AND VOLTAGE SWING /*Register : L1_TXPMD_TM_48 @ 0XFD404CC0

@@ -17827,6 +19266,20 @@ unsigned long psu_serdes_init_data() { PSU_Mask_Write (SERDES_L1_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000000U); /*############################################################################################################################ */ + /*Register : L3_TX_ANA_TM_18 @ 0XFD40C048

+ + pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved + PSU_SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0 0x1 + + Override for PIPE TX de-emphasis + (OFFSET, MASK, VALUE) (0XFD40C048, 0x000000FFU ,0x00000001U) + RegMask = (SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000001U); + /*############################################################################################################################ */ + return 1; } @@ -17862,6 +19315,20 @@ unsigned long psu_resetout_init_data() { PSU_Mask_Write (USB3_0_FPD_POWER_PRSNT_OFFSET ,0x00000001U ,0x00000001U); /*############################################################################################################################ */ + /*Register : fpd_pipe_clk @ 0XFF9D007C

+ + This bit is used to choose between PIPE clock coming from SerDes and the suspend clk + PSU_USB3_0_FPD_PIPE_CLK_OPTION 0x0 + + fpd_pipe_clk + (OFFSET, MASK, VALUE) (0XFF9D007C, 0x00000001U ,0x00000000U) + RegMask = (USB3_0_FPD_PIPE_CLK_OPTION_MASK | 0 ); + + RegVal = ((0x00000000U << USB3_0_FPD_PIPE_CLK_OPTION_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (USB3_0_FPD_PIPE_CLK_OFFSET ,0x00000001U ,0x00000000U); + /*############################################################################################################################ */ + // : /*Register : RST_LPD_TOP @ 0XFF5E023C

@@ -17925,27 +19392,23 @@ unsigned long psu_resetout_init_data() { PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000000U); /*############################################################################################################################ */ - // : PUTTING PCIE IN RESET + // : PUTTING PCIE CFG AND BRIDGE IN RESET /*Register : RST_FPD_TOP @ 0XFD1A0100

PCIE config reset PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET 0X0 - PCIE control block level reset - PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET 0X0 - PCIE bridge block level reset (AXI interface) PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET 0X0 FPD Block level software controlled reset - (OFFSET, MASK, VALUE) (0XFD1A0100, 0x000E0000U ,0x00000000U) - RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK | 0 ); + (OFFSET, MASK, VALUE) (0XFD1A0100, 0x000C0000U ,0x00000000U) + RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK | 0 ); RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT - | 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT | 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000E0000U ,0x00000000U); + PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000C0000U ,0x00000000U); /*############################################################################################################################ */ // : PUTTING DP IN RESET @@ -18001,7 +19464,7 @@ unsigned long psu_resetout_init_data() { . The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger alue. Note: This field is valid only in device mode. - PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM 0X9 + PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM 0x9 Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the @@ -18009,7 +19472,7 @@ unsigned long psu_resetout_init_data() { ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur ng hibernation. - This bit is valid only in device mode. - PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY 0x0 Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen _n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre @@ -18018,42 +19481,33 @@ unsigned long psu_resetout_init_data() { n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet d. - PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM 0x0 USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0. - PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL 0X0 - - Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co - figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app - ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F - r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s - t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati - g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi - when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed. - PSU_USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20 0X1 + PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL 0x0 Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1 full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0. - PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF 0x0 ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s lected through DWC_USB3_HSPHY_INTERFACE. - PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL 0X1 + PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL 0x1 PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz. - PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF 0x0 HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for @@ -18063,25 +19517,24 @@ unsigned long psu_resetout_init_data() { ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One 60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times - PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL 0X7 + PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL 0x7 Global USB2 PHY Configuration Register The application must program this register before starting any transactions on either he SoC bus or the USB. In Device-only configurations, only one register is needed. In Host mode, per-port registers are imple ented. - (OFFSET, MASK, VALUE) (0XFE20C200, 0x00003FFFU ,0x00002457U) - RegMask = (USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK | USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK | USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK | USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK | USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK | USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK | 0 ); + (OFFSET, MASK, VALUE) (0XFE20C200, 0x00003FBFU ,0x00002417U) + RegMask = (USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK | USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK | USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK | USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK | USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK | 0 ); RegVal = ((0x00000009U << USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT - | 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT | 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT | 0x00000007U << USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (USB3_0_XHCI_GUSB2PHYCFG_OFFSET ,0x00003FFFU ,0x00002457U); + PSU_Mask_Write (USB3_0_XHCI_GUSB2PHYCFG_OFFSET ,0x00003FBFU ,0x00002417U); /*############################################################################################################################ */ /*Register : GFLADJ @ 0XFE20C630

@@ -18095,7 +19548,7 @@ unsigned long psu_resetout_init_data() { uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value) - PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ 0X0 + PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ 0x0 Global Frame Length Adjustment Register This register provides options for the software to control the core behavior with res ect to SOF (Start of Frame) and ITP (Isochronous Timestamp Packet) timers and frame timer functionality. It provides an optio @@ -18107,64 +19560,9 @@ unsigned long psu_resetout_init_data() { RegVal = ((0x00000000U << USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT | 0 ) & RegMask); */ PSU_Mask_Write (USB3_0_XHCI_GFLADJ_OFFSET ,0x003FFF00U ,0x00000000U); - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE0 - /*Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

- - Status Read value of PLL Lock - PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD4023E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L0_PLL_STATUS_READ_1_OFFSET,0x00000010U); - - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE1 - /*Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

- - Status Read value of PLL Lock - PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD4063E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L1_PLL_STATUS_READ_1_OFFSET,0x00000010U); - - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE2 - /*Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

- - Status Read value of PLL Lock - PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD40A3E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L2_PLL_STATUS_READ_1_OFFSET,0x00000010U); - - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE3 - /*Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

- - Status Read value of PLL Lock - PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD40E3E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L3_PLL_STATUS_READ_1_OFFSET,0x00000010U); - /*############################################################################################################################ */ // : UPDATING TWO PCIE REGISTERS DEFAULT VALUES, AS THESE REGISTERS HAVE INCORRECT RESET VALUES IN SILICON. - /*Register : ATTR_37 @ 0XFD480094

- - Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r - gister.; EP=0x0001; RP=0x0001 - PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY 0X1 - - ATTR_37 - (OFFSET, MASK, VALUE) (0XFD480094, 0x00004000U ,0x00004000U) - RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK | 0 ); - - RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00004000U ,0x00004000U); - /*############################################################################################################################ */ - /*Register : ATTR_25 @ 0XFD480064

If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root @@ -18696,13 +20094,18 @@ unsigned long psu_resetout_init_data() { Required for Root.; EP=0x0000; RP=0x0001 PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP 0x1 + Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r + gister.; EP=0x0001; RP=0x0001 + PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY 0x1 + ATTR_37 - (OFFSET, MASK, VALUE) (0XFD480094, 0x00000200U ,0x00000200U) - RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK | 0 ); + (OFFSET, MASK, VALUE) (0XFD480094, 0x00004200U ,0x00004200U) + RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK | PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK | 0 ); RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT + | 0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00000200U ,0x00000200U); + PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00004200U ,0x00004200U); /*############################################################################################################################ */ /*Register : ATTR_93 @ 0XFD480174

@@ -18876,6 +20279,271 @@ unsigned long psu_resetout_init_data() { PSU_Mask_Write (PCIE_ATTRIB_ATTR_43_OFFSET ,0x00000100U ,0x00000000U); /*############################################################################################################################ */ + /*Register : ATTR_48 @ 0XFD4800C0

+ + MSI-X Table Size. This value is transferred to the MSI-X Message Control[10:0] field. Set to 0 if MSI-X is not enabled. Note + hat the core does not implement the table; that must be implemented in user logic.; EP=0x0003; RP=0x0000 + PSU_PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE 0 + + ATTR_48 + (OFFSET, MASK, VALUE) (0XFD4800C0, 0x000007FFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_48_OFFSET ,0x000007FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_46 @ 0XFD4800B8

+ + MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0001; + P=0x0000 + PSU_PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET 0 + + ATTR_46 + (OFFSET, MASK, VALUE) (0XFD4800B8, 0x0000FFFFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_46_OFFSET ,0x0000FFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_47 @ 0XFD4800BC

+ + MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0000; + P=0x0000 + PSU_PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET 0 + + ATTR_47 + (OFFSET, MASK, VALUE) (0XFD4800BC, 0x00001FFFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_47_OFFSET ,0x00001FFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_44 @ 0XFD4800B0

+ + MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x0001; RP=0x0000 + PSU_PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET 0 + + ATTR_44 + (OFFSET, MASK, VALUE) (0XFD4800B0, 0x0000FFFFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_44_OFFSET ,0x0000FFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_45 @ 0XFD4800B4

+ + MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x1000; RP=0x0000 + PSU_PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET 0 + + ATTR_45 + (OFFSET, MASK, VALUE) (0XFD4800B4, 0x0000FFF8U ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_45_OFFSET ,0x0000FFF8U ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : CB @ 0XFD48031C

+ + DT837748 Enable + PSU_PCIE_ATTRIB_CB_CB1 0x0 + + ECO Register 1 + (OFFSET, MASK, VALUE) (0XFD48031C, 0x00000002U ,0x00000000U) + RegMask = (PCIE_ATTRIB_CB_CB1_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_CB_CB1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_CB_OFFSET ,0x00000002U ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_35 @ 0XFD48008C

+ + Active State PM Support. Indicates the level of active state power management supported by the selected PCI Express Link, enc + ded as follows: 0 Reserved, 1 L0s entry supported, 2 Reserved, 3 L0s and L1 entry supported.; EP=0x0001; RP=0x0001 + PSU_PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT 0x0 + + ATTR_35 + (OFFSET, MASK, VALUE) (0XFD48008C, 0x00003000U ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_35_OFFSET ,0x00003000U ,0x00000000U); + /*############################################################################################################################ */ + + // : PUTTING PCIE CONTROL IN RESET + /*Register : RST_FPD_TOP @ 0XFD1A0100

+ + PCIE control block level reset + PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET 0X0 + + FPD Block level software controlled reset + (OFFSET, MASK, VALUE) (0XFD1A0100, 0x00020000U ,0x00000000U) + RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | 0 ); + + RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00020000U ,0x00000000U); + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE0 + /*Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

+ + Status Read value of PLL Lock + PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD4023E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L0_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE1 + /*Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

+ + Status Read value of PLL Lock + PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD4063E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L1_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE2 + /*Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

+ + Status Read value of PLL Lock + PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD40A3E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L2_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE3 + /*Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

+ + Status Read value of PLL Lock + PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD40E3E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L3_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : SATA AHCI VENDOR SETTING + /*Register : PP2C @ 0XFD0C00AC

+ + CIBGMN: COMINIT Burst Gap Minimum. + PSU_SATA_AHCI_VENDOR_PP2C_CIBGMN 0x18 + + CIBGMX: COMINIT Burst Gap Maximum. + PSU_SATA_AHCI_VENDOR_PP2C_CIBGMX 0x40 + + CIBGN: COMINIT Burst Gap Nominal. + PSU_SATA_AHCI_VENDOR_PP2C_CIBGN 0x18 + + CINMP: COMINIT Negate Minimum Period. + PSU_SATA_AHCI_VENDOR_PP2C_CINMP 0x28 + + PP2C - Port Phy2Cfg Register. This register controls the configuration of the Phy Control OOB timing for the COMINIT paramete + s for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00AC, 0xFFFFFFFFU ,0x28184018U) + RegMask = (SATA_AHCI_VENDOR_PP2C_CIBGMN_MASK | SATA_AHCI_VENDOR_PP2C_CIBGMX_MASK | SATA_AHCI_VENDOR_PP2C_CIBGN_MASK | SATA_AHCI_VENDOR_PP2C_CINMP_MASK | 0 ); + + RegVal = ((0x00000018U << SATA_AHCI_VENDOR_PP2C_CIBGMN_SHIFT + | 0x00000040U << SATA_AHCI_VENDOR_PP2C_CIBGMX_SHIFT + | 0x00000018U << SATA_AHCI_VENDOR_PP2C_CIBGN_SHIFT + | 0x00000028U << SATA_AHCI_VENDOR_PP2C_CINMP_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP2C_OFFSET ,0xFFFFFFFFU ,0x28184018U); + /*############################################################################################################################ */ + + /*Register : PP3C @ 0XFD0C00B0

+ + CWBGMN: COMWAKE Burst Gap Minimum. + PSU_SATA_AHCI_VENDOR_PP3C_CWBGMN 0x06 + + CWBGMX: COMWAKE Burst Gap Maximum. + PSU_SATA_AHCI_VENDOR_PP3C_CWBGMX 0x14 + + CWBGN: COMWAKE Burst Gap Nominal. + PSU_SATA_AHCI_VENDOR_PP3C_CWBGN 0x08 + + CWNMP: COMWAKE Negate Minimum Period. + PSU_SATA_AHCI_VENDOR_PP3C_CWNMP 0x0E + + PP3C - Port Phy3CfgRegister. This register controls the configuration of the Phy Control OOB timing for the COMWAKE parameter + for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00B0, 0xFFFFFFFFU ,0x0E081406U) + RegMask = (SATA_AHCI_VENDOR_PP3C_CWBGMN_MASK | SATA_AHCI_VENDOR_PP3C_CWBGMX_MASK | SATA_AHCI_VENDOR_PP3C_CWBGN_MASK | SATA_AHCI_VENDOR_PP3C_CWNMP_MASK | 0 ); + + RegVal = ((0x00000006U << SATA_AHCI_VENDOR_PP3C_CWBGMN_SHIFT + | 0x00000014U << SATA_AHCI_VENDOR_PP3C_CWBGMX_SHIFT + | 0x00000008U << SATA_AHCI_VENDOR_PP3C_CWBGN_SHIFT + | 0x0000000EU << SATA_AHCI_VENDOR_PP3C_CWNMP_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP3C_OFFSET ,0xFFFFFFFFU ,0x0E081406U); + /*############################################################################################################################ */ + + /*Register : PP4C @ 0XFD0C00B4

+ + BMX: COM Burst Maximum. + PSU_SATA_AHCI_VENDOR_PP4C_BMX 0x13 + + BNM: COM Burst Nominal. + PSU_SATA_AHCI_VENDOR_PP4C_BNM 0x08 + + SFD: Signal Failure Detection, if the signal detection de-asserts for a time greater than this then the OOB detector will det + rmine this is a line idle and cause the PhyInit state machine to exit the Phy Ready State. A value of zero disables the Signa + Failure Detector. The value is based on the OOB Detector Clock typically (PMCLK Clock Period) * SFD giving a nominal time of + 500ns based on a 150MHz PMCLK. + PSU_SATA_AHCI_VENDOR_PP4C_SFD 0x4A + + PTST: Partial to Slumber timer value, specific delay the controller should apply while in partial before entering slumber. Th + value is bases on the system clock divided by 128, total delay = (Sys Clock Period) * PTST * 128 + PSU_SATA_AHCI_VENDOR_PP4C_PTST 0x06 + + PP4C - Port Phy4Cfg Register. This register controls the configuration of the Phy Control Burst timing for the COM parameters + for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00B4, 0xFFFFFFFFU ,0x064A0813U) + RegMask = (SATA_AHCI_VENDOR_PP4C_BMX_MASK | SATA_AHCI_VENDOR_PP4C_BNM_MASK | SATA_AHCI_VENDOR_PP4C_SFD_MASK | SATA_AHCI_VENDOR_PP4C_PTST_MASK | 0 ); + + RegVal = ((0x00000013U << SATA_AHCI_VENDOR_PP4C_BMX_SHIFT + | 0x00000008U << SATA_AHCI_VENDOR_PP4C_BNM_SHIFT + | 0x0000004AU << SATA_AHCI_VENDOR_PP4C_SFD_SHIFT + | 0x00000006U << SATA_AHCI_VENDOR_PP4C_PTST_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP4C_OFFSET ,0xFFFFFFFFU ,0x064A0813U); + /*############################################################################################################################ */ + + /*Register : PP5C @ 0XFD0C00B8

+ + RIT: Retry Interval Timer. The calculated value divided by two, the lower digit of precision is not needed. + PSU_SATA_AHCI_VENDOR_PP5C_RIT 0xC96A4 + + RCT: Rate Change Timer, a value based on the 54.2us for which a SATA device will transmit at a fixed rate ALIGNp after OOB ha + completed, for a fast SERDES it is suggested that this value be 54.2us / 4 + PSU_SATA_AHCI_VENDOR_PP5C_RCT 0x3FF + + PP5C - Port Phy5Cfg Register. This register controls the configuration of the Phy Control Retry Interval timing for either Po + t 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00B8, 0xFFFFFFFFU ,0x3FFC96A4U) + RegMask = (SATA_AHCI_VENDOR_PP5C_RIT_MASK | SATA_AHCI_VENDOR_PP5C_RCT_MASK | 0 ); + + RegVal = ((0x000C96A4U << SATA_AHCI_VENDOR_PP5C_RIT_SHIFT + | 0x000003FFU << SATA_AHCI_VENDOR_PP5C_RCT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP5C_OFFSET ,0xFFFFFFFFU ,0x3FFC96A4U); + /*############################################################################################################################ */ + return 1; } @@ -19152,12 +20820,23 @@ unsigned long psu_ddr_phybringup_data() { unsigned int regval = 0; - Xil_Out32(0xFD090000U, 0x0000A845U); - Xil_Out32(0xFD090004U, 0x003FFFFFU); - Xil_Out32(0xFD09000CU, 0x00000010U); - Xil_Out32(0xFD090010U, 0x00000010U); + int dpll_divisor; + dpll_divisor = (Xil_In32(0xFD1A0080U) & 0x00003F00U) >> 0x00000008U; + prog_reg (0xFD1A0080U, 0x00003F00U, 0x00000008U, 0x00000005U); + prog_reg (0xFD080028U, 0x00000001U, 0x00000000U, 0x00000001U); + Xil_Out32(0xFD080004U, 0x00040003U); + while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U); + prog_reg (0xFD080684U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD0806A4U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD0806C4U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD0806E4U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD1A0080, 0x3F00, 0x8, dpll_divisor); + Xil_Out32(0xFD080004U, 0x40040071U); + while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U); + Xil_Out32(0xFD080004U, 0x40040001U); + while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U); // PHY BRINGUP SEQ - while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000000FU); + while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU); prog_reg (0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); //poll for PHY initialization to complete while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU); @@ -19174,14 +20853,14 @@ unsigned long psu_ddr_phybringup_data() { // Run Vref training in static read mode - Xil_Out32(0xFD080200U, 0x110011C7U); + Xil_Out32(0xFD080200U, 0x100091C7U); Xil_Out32(0xFD080018U, 0x00F01EF2U); - Xil_Out32(0xFD08001CU, 0x55AA0098U); - Xil_Out32(0xFD08142CU, 0x00001830U); - Xil_Out32(0xFD08146CU, 0x00001830U); - Xil_Out32(0xFD0814ACU, 0x00001830U); - Xil_Out32(0xFD0814ECU, 0x00001830U); - Xil_Out32(0xFD08152CU, 0x00001830U); + Xil_Out32(0xFD08001CU, 0x55AA5498U); + Xil_Out32(0xFD08142CU, 0x00041830U); + Xil_Out32(0xFD08146CU, 0x00041830U); + Xil_Out32(0xFD0814ACU, 0x00041830U); + Xil_Out32(0xFD0814ECU, 0x00041830U); + Xil_Out32(0xFD08152CU, 0x00041830U); Xil_Out32(0xFD080004, 0x00060001); //PUB_PIR @@ -19191,14 +20870,22 @@ unsigned long psu_ddr_phybringup_data() { } // Vref training is complete, disabling static read mode - Xil_Out32(0xFD080200U, 0x810011C7U); + Xil_Out32(0xFD080200U, 0x800091C7U); Xil_Out32(0xFD080018U, 0x00F12302U); - Xil_Out32(0xFD08001CU, 0x55AA0080U); - Xil_Out32(0xFD08142CU, 0x00001800U); - Xil_Out32(0xFD08146CU, 0x00001800U); - Xil_Out32(0xFD0814ACU, 0x00001800U); - Xil_Out32(0xFD0814ECU, 0x00001800U); - Xil_Out32(0xFD08152CU, 0x00001800U); + Xil_Out32(0xFD08001CU, 0x55AA5480U); + Xil_Out32(0xFD08142CU, 0x00041800U); + Xil_Out32(0xFD08146CU, 0x00041800U); + Xil_Out32(0xFD0814ACU, 0x00041800U); + Xil_Out32(0xFD0814ECU, 0x00041800U); + Xil_Out32(0xFD08152CU, 0x00041800U); + + + Xil_Out32(0xFD080004, 0x0000C001); //PUB_PIR + regval = Xil_In32(0xFD080030); //PUB_PGSR0 + while((regval & 0x80000C01) != 0x80000C01){ + regval = Xil_In32(0xFD080030); //PUB_PGSR0 + } + Xil_Out32(0xFD070180U, 0x01000040U); Xil_Out32(0xFD070060U, 0x00000000U); prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U); @@ -19228,7 +20915,7 @@ return 1; int mask_pollOnValue(u32 add , u32 mask, u32 value ) { - volatile u32 *addr = (volatile u32*) add; + volatile u32 *addr = (volatile u32*)(unsigned long) add; int i = 0; while ((*addr & mask)!= value) { if (i == PSU_MASK_POLL_TIME) { @@ -19241,7 +20928,7 @@ int mask_pollOnValue(u32 add , u32 mask, u32 value ) { } int mask_poll(u32 add , u32 mask) { - volatile u32 *addr = (volatile u32*) add; + volatile u32 *addr = (volatile u32*)(unsigned long) add; int i = 0; while (!(*addr & mask)) { if (i == PSU_MASK_POLL_TIME) { @@ -19258,7 +20945,7 @@ void mask_delay(u32 delay) { } u32 mask_read(u32 add , u32 mask ) { - volatile u32 *addr = (volatile u32*) add; + volatile u32 *addr = (volatile u32*)(unsigned long) add; u32 val = (*addr & mask); //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val); return val; @@ -19370,6 +21057,58 @@ void init_peripheral() tmp_regval &= ~0x00000001; Xil_Out32(0xFD690030, tmp_regval); } + +int psu_init_xppu_aper_ram() { + unsigned long APER_OFFSET = 0xFF981000; + int i = 0; + for (; i <= 400; i++) { + PSU_Mask_Write (APER_OFFSET ,0xF80FFFFFU ,0x08080000U); + APER_OFFSET = APER_OFFSET + 0x4; + } + + return 0; +} + +int psu_lpd_protection() { + psu_init_xppu_aper_ram(); + psu_lpd_xppu_data(); + return 0; +} + +int psu_ddr_protection() { + psu_ddr_xmpu0_data(); + psu_ddr_xmpu1_data(); + psu_ddr_xmpu2_data(); + psu_ddr_xmpu3_data(); + psu_ddr_xmpu4_data(); + psu_ddr_xmpu5_data(); + return 0; +} +int psu_ocm_protection() { + psu_ocm_xmpu_data(); + return 0; +} + +int psu_fpd_protection() { + psu_fpd_xmpu_data(); + return 0; +} + +int psu_protection_lock() { + psu_protection_lock_data(); + return 0; +} + +int psu_protection() { + psu_ddr_protection(); + psu_ocm_protection(); + psu_fpd_protection(); + psu_lpd_protection(); + return 0; +} + + + int psu_init() { diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.h index 97a2ae16d..e9741eb2f 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.h +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.h @@ -784,26 +784,14 @@ #define CRF_APB_VPLL_FRAC_CFG_DATA_DEFVAL 0x00000000 #define CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT 0 #define CRF_APB_VPLL_FRAC_CFG_DATA_MASK 0x0000FFFFU -#undef CRL_APB_GEM0_REF_CTRL_OFFSET -#define CRL_APB_GEM0_REF_CTRL_OFFSET 0XFF5E0050 -#undef CRL_APB_GEM1_REF_CTRL_OFFSET -#define CRL_APB_GEM1_REF_CTRL_OFFSET 0XFF5E0054 -#undef CRL_APB_GEM2_REF_CTRL_OFFSET -#define CRL_APB_GEM2_REF_CTRL_OFFSET 0XFF5E0058 #undef CRL_APB_GEM3_REF_CTRL_OFFSET #define CRL_APB_GEM3_REF_CTRL_OFFSET 0XFF5E005C -#undef CRL_APB_GEM_TSU_REF_CTRL_OFFSET -#define CRL_APB_GEM_TSU_REF_CTRL_OFFSET 0XFF5E0100 #undef CRL_APB_USB0_BUS_REF_CTRL_OFFSET #define CRL_APB_USB0_BUS_REF_CTRL_OFFSET 0XFF5E0060 -#undef CRL_APB_USB1_BUS_REF_CTRL_OFFSET -#define CRL_APB_USB1_BUS_REF_CTRL_OFFSET 0XFF5E0064 #undef CRL_APB_USB3_DUAL_REF_CTRL_OFFSET #define CRL_APB_USB3_DUAL_REF_CTRL_OFFSET 0XFF5E004C #undef CRL_APB_QSPI_REF_CTRL_OFFSET #define CRL_APB_QSPI_REF_CTRL_OFFSET 0XFF5E0068 -#undef CRL_APB_SDIO0_REF_CTRL_OFFSET -#define CRL_APB_SDIO0_REF_CTRL_OFFSET 0XFF5E006C #undef CRL_APB_SDIO1_REF_CTRL_OFFSET #define CRL_APB_SDIO1_REF_CTRL_OFFSET 0XFF5E0070 #undef IOU_SLCR_SDIO_CLK_CTRL_OFFSET @@ -816,20 +804,12 @@ #define CRL_APB_I2C0_REF_CTRL_OFFSET 0XFF5E0120 #undef CRL_APB_I2C1_REF_CTRL_OFFSET #define CRL_APB_I2C1_REF_CTRL_OFFSET 0XFF5E0124 -#undef CRL_APB_SPI0_REF_CTRL_OFFSET -#define CRL_APB_SPI0_REF_CTRL_OFFSET 0XFF5E007C -#undef CRL_APB_SPI1_REF_CTRL_OFFSET -#define CRL_APB_SPI1_REF_CTRL_OFFSET 0XFF5E0080 -#undef CRL_APB_CAN0_REF_CTRL_OFFSET -#define CRL_APB_CAN0_REF_CTRL_OFFSET 0XFF5E0084 #undef CRL_APB_CAN1_REF_CTRL_OFFSET #define CRL_APB_CAN1_REF_CTRL_OFFSET 0XFF5E0088 #undef CRL_APB_CPU_R5_CTRL_OFFSET #define CRL_APB_CPU_R5_CTRL_OFFSET 0XFF5E0090 #undef CRL_APB_IOU_SWITCH_CTRL_OFFSET #define CRL_APB_IOU_SWITCH_CTRL_OFFSET 0XFF5E009C -#undef CRL_APB_CSU_PLL_CTRL_OFFSET -#define CRL_APB_CSU_PLL_CTRL_OFFSET 0XFF5E00A0 #undef CRL_APB_PCAP_CTRL_OFFSET #define CRL_APB_PCAP_CTRL_OFFSET 0XFF5E00A4 #undef CRL_APB_LPD_SWITCH_CTRL_OFFSET @@ -838,8 +818,6 @@ #define CRL_APB_LPD_LSBUS_CTRL_OFFSET 0XFF5E00AC #undef CRL_APB_DBG_LPD_CTRL_OFFSET #define CRL_APB_DBG_LPD_CTRL_OFFSET 0XFF5E00B0 -#undef CRL_APB_NAND_REF_CTRL_OFFSET -#define CRL_APB_NAND_REF_CTRL_OFFSET 0XFF5E00B4 #undef CRL_APB_ADMA_REF_CTRL_OFFSET #define CRL_APB_ADMA_REF_CTRL_OFFSET 0XFF5E00B8 #undef CRL_APB_PL0_REF_CTRL_OFFSET @@ -884,8 +862,6 @@ #define CRF_APB_TOPSW_MAIN_CTRL_OFFSET 0XFD1A00C0 #undef CRF_APB_TOPSW_LSBUS_CTRL_OFFSET #define CRF_APB_TOPSW_LSBUS_CTRL_OFFSET 0XFD1A00C4 -#undef CRF_APB_GTGREF0_REF_CTRL_OFFSET -#define CRF_APB_GTGREF0_REF_CTRL_OFFSET 0XFD1A00C8 #undef CRF_APB_DBG_TSTMP_CTRL_OFFSET #define CRF_APB_DBG_TSTMP_CTRL_OFFSET 0XFD1A00F8 #undef IOU_SLCR_IOU_TTC_APB_CLK_OFFSET @@ -897,129 +873,6 @@ #undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET #define LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET 0XFF410050 -/*Clock active for the RX channel*/ -#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK -#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT 26 -#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK 0x04000000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_GEM0_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active for the RX channel*/ -#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK -#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT 26 -#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK 0x04000000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_GEM1_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active for the RX channel*/ -#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK -#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT 26 -#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK 0x04000000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_GEM2_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active for the RX channel*/ #undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_DEFVAL #undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT @@ -1061,39 +914,6 @@ #define CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK 0x00000007U -/*6 bit divider*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*6 bit divider*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK 0x01000000U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT @@ -1127,39 +947,6 @@ #define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT @@ -1226,39 +1013,6 @@ #define CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK -#define CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_SDIO1_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT @@ -1432,105 +1186,6 @@ #define CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_CLKACT_MASK -#define CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_SPI0_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_CLKACT_MASK -#define CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_SPI1_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK -#define CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_CLKACT_MASK -#define CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_CAN0_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_CAN1_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT @@ -1615,31 +1270,6 @@ #define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL -#undef CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT -#undef CRL_APB_CSU_PLL_CTRL_CLKACT_MASK -#define CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL 0x01001500 -#define CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_CSU_PLL_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK -#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL 0x01001500 -#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT -#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK -#define CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL 0x01001500 -#define CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_PCAP_CTRL_CLKACT_DEFVAL #undef CRL_APB_PCAP_CTRL_CLKACT_SHIFT @@ -1740,39 +1370,6 @@ #define CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_NAND_REF_CTRL_CLKACT_MASK -#define CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_NAND_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_NAND_REF_CTRL_SRCSEL_MASK -#define CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_NAND_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_ADMA_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT @@ -2388,31 +1985,6 @@ #define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT 24 #define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK 0x01000000U -/*6 bit divider*/ -#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT -#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK -#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL 0x00000800 -#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of - he new clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL -#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT -#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK -#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL 0x00000800 -#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL -#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT -#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK -#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL 0x00000800 -#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT 24 -#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK 0x01000000U - /*6 bit divider*/ #undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_DEFVAL #undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT @@ -2714,6 +2286,8 @@ #define DDR_PHY_PGCR0_OFFSET 0XFD080010 #undef DDR_PHY_PGCR2_OFFSET #define DDR_PHY_PGCR2_OFFSET 0XFD080018 +#undef DDR_PHY_PGCR3_OFFSET +#define DDR_PHY_PGCR3_OFFSET 0XFD08001C #undef DDR_PHY_PGCR5_OFFSET #define DDR_PHY_PGCR5_OFFSET 0XFD080024 #undef DDR_PHY_PTR0_OFFSET @@ -2742,6 +2316,8 @@ #define DDR_PHY_RDIMMGCR0_OFFSET 0XFD080140 #undef DDR_PHY_RDIMMGCR1_OFFSET #define DDR_PHY_RDIMMGCR1_OFFSET 0XFD080144 +#undef DDR_PHY_RDIMMCR0_OFFSET +#define DDR_PHY_RDIMMCR0_OFFSET 0XFD080150 #undef DDR_PHY_RDIMMCR1_OFFSET #define DDR_PHY_RDIMMCR1_OFFSET 0XFD080154 #undef DDR_PHY_MR0_OFFSET @@ -2774,6 +2350,8 @@ #define DDR_PHY_DTCR1_OFFSET 0XFD080204 #undef DDR_PHY_CATR0_OFFSET #define DDR_PHY_CATR0_OFFSET 0XFD080240 +#undef DDR_PHY_BISTLSR_OFFSET +#define DDR_PHY_BISTLSR_OFFSET 0XFD080414 #undef DDR_PHY_RIOCR5_OFFSET #define DDR_PHY_RIOCR5_OFFSET 0XFD0804F4 #undef DDR_PHY_ACIOCR0_OFFSET @@ -2790,12 +2368,18 @@ #define DDR_PHY_VTCR0_OFFSET 0XFD080528 #undef DDR_PHY_VTCR1_OFFSET #define DDR_PHY_VTCR1_OFFSET 0XFD08052C +#undef DDR_PHY_ACBDLR1_OFFSET +#define DDR_PHY_ACBDLR1_OFFSET 0XFD080544 +#undef DDR_PHY_ACBDLR2_OFFSET +#define DDR_PHY_ACBDLR2_OFFSET 0XFD080548 #undef DDR_PHY_ACBDLR6_OFFSET #define DDR_PHY_ACBDLR6_OFFSET 0XFD080558 #undef DDR_PHY_ACBDLR7_OFFSET #define DDR_PHY_ACBDLR7_OFFSET 0XFD08055C #undef DDR_PHY_ACBDLR8_OFFSET #define DDR_PHY_ACBDLR8_OFFSET 0XFD080560 +#undef DDR_PHY_ACBDLR9_OFFSET +#define DDR_PHY_ACBDLR9_OFFSET 0XFD080564 #undef DDR_PHY_ZQCR_OFFSET #define DDR_PHY_ZQCR_OFFSET 0XFD080680 #undef DDR_PHY_ZQ0PR0_OFFSET @@ -2928,30 +2512,40 @@ #define DDR_PHY_DX8LCDLR2_OFFSET 0XFD080F88 #undef DDR_PHY_DX8GTR0_OFFSET #define DDR_PHY_DX8GTR0_OFFSET 0XFD080FC0 +#undef DDR_PHY_DX8SL0OSC_OFFSET +#define DDR_PHY_DX8SL0OSC_OFFSET 0XFD081400 #undef DDR_PHY_DX8SL0DQSCTL_OFFSET #define DDR_PHY_DX8SL0DQSCTL_OFFSET 0XFD08141C #undef DDR_PHY_DX8SL0DXCTL2_OFFSET #define DDR_PHY_DX8SL0DXCTL2_OFFSET 0XFD08142C #undef DDR_PHY_DX8SL0IOCR_OFFSET #define DDR_PHY_DX8SL0IOCR_OFFSET 0XFD081430 +#undef DDR_PHY_DX8SL1OSC_OFFSET +#define DDR_PHY_DX8SL1OSC_OFFSET 0XFD081440 #undef DDR_PHY_DX8SL1DQSCTL_OFFSET #define DDR_PHY_DX8SL1DQSCTL_OFFSET 0XFD08145C #undef DDR_PHY_DX8SL1DXCTL2_OFFSET #define DDR_PHY_DX8SL1DXCTL2_OFFSET 0XFD08146C #undef DDR_PHY_DX8SL1IOCR_OFFSET #define DDR_PHY_DX8SL1IOCR_OFFSET 0XFD081470 +#undef DDR_PHY_DX8SL2OSC_OFFSET +#define DDR_PHY_DX8SL2OSC_OFFSET 0XFD081480 #undef DDR_PHY_DX8SL2DQSCTL_OFFSET #define DDR_PHY_DX8SL2DQSCTL_OFFSET 0XFD08149C #undef DDR_PHY_DX8SL2DXCTL2_OFFSET #define DDR_PHY_DX8SL2DXCTL2_OFFSET 0XFD0814AC #undef DDR_PHY_DX8SL2IOCR_OFFSET #define DDR_PHY_DX8SL2IOCR_OFFSET 0XFD0814B0 +#undef DDR_PHY_DX8SL3OSC_OFFSET +#define DDR_PHY_DX8SL3OSC_OFFSET 0XFD0814C0 #undef DDR_PHY_DX8SL3DQSCTL_OFFSET #define DDR_PHY_DX8SL3DQSCTL_OFFSET 0XFD0814DC #undef DDR_PHY_DX8SL3DXCTL2_OFFSET #define DDR_PHY_DX8SL3DXCTL2_OFFSET 0XFD0814EC #undef DDR_PHY_DX8SL3IOCR_OFFSET #define DDR_PHY_DX8SL3IOCR_OFFSET 0XFD0814F0 +#undef DDR_PHY_DX8SL4OSC_OFFSET +#define DDR_PHY_DX8SL4OSC_OFFSET 0XFD081500 #undef DDR_PHY_DX8SL4DQSCTL_OFFSET #define DDR_PHY_DX8SL4DQSCTL_OFFSET 0XFD08151C #undef DDR_PHY_DX8SL4DXCTL2_OFFSET @@ -6676,6 +6270,102 @@ #define DDR_PHY_PGCR2_TREFPRD_SHIFT 0 #define DDR_PHY_PGCR2_TREFPRD_MASK 0x0003FFFFU +/*CKN Enable*/ +#undef DDR_PHY_PGCR3_CKNEN_DEFVAL +#undef DDR_PHY_PGCR3_CKNEN_SHIFT +#undef DDR_PHY_PGCR3_CKNEN_MASK +#define DDR_PHY_PGCR3_CKNEN_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_CKNEN_SHIFT 24 +#define DDR_PHY_PGCR3_CKNEN_MASK 0xFF000000U + +/*CK Enable*/ +#undef DDR_PHY_PGCR3_CKEN_DEFVAL +#undef DDR_PHY_PGCR3_CKEN_SHIFT +#undef DDR_PHY_PGCR3_CKEN_MASK +#define DDR_PHY_PGCR3_CKEN_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_CKEN_SHIFT 16 +#define DDR_PHY_PGCR3_CKEN_MASK 0x00FF0000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_PGCR3_RESERVED_15_DEFVAL +#undef DDR_PHY_PGCR3_RESERVED_15_SHIFT +#undef DDR_PHY_PGCR3_RESERVED_15_MASK +#define DDR_PHY_PGCR3_RESERVED_15_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_RESERVED_15_SHIFT 15 +#define DDR_PHY_PGCR3_RESERVED_15_MASK 0x00008000U + +/*Enable Clock Gating for AC [0] ctl_rd_clk*/ +#undef DDR_PHY_PGCR3_GATEACRDCLK_DEFVAL +#undef DDR_PHY_PGCR3_GATEACRDCLK_SHIFT +#undef DDR_PHY_PGCR3_GATEACRDCLK_MASK +#define DDR_PHY_PGCR3_GATEACRDCLK_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_GATEACRDCLK_SHIFT 13 +#define DDR_PHY_PGCR3_GATEACRDCLK_MASK 0x00006000U + +/*Enable Clock Gating for AC [0] ddr_clk*/ +#undef DDR_PHY_PGCR3_GATEACDDRCLK_DEFVAL +#undef DDR_PHY_PGCR3_GATEACDDRCLK_SHIFT +#undef DDR_PHY_PGCR3_GATEACDDRCLK_MASK +#define DDR_PHY_PGCR3_GATEACDDRCLK_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_GATEACDDRCLK_SHIFT 11 +#define DDR_PHY_PGCR3_GATEACDDRCLK_MASK 0x00001800U + +/*Enable Clock Gating for AC [0] ctl_clk*/ +#undef DDR_PHY_PGCR3_GATEACCTLCLK_DEFVAL +#undef DDR_PHY_PGCR3_GATEACCTLCLK_SHIFT +#undef DDR_PHY_PGCR3_GATEACCTLCLK_MASK +#define DDR_PHY_PGCR3_GATEACCTLCLK_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_GATEACCTLCLK_SHIFT 9 +#define DDR_PHY_PGCR3_GATEACCTLCLK_MASK 0x00000600U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_PGCR3_RESERVED_8_DEFVAL +#undef DDR_PHY_PGCR3_RESERVED_8_SHIFT +#undef DDR_PHY_PGCR3_RESERVED_8_MASK +#define DDR_PHY_PGCR3_RESERVED_8_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_RESERVED_8_SHIFT 8 +#define DDR_PHY_PGCR3_RESERVED_8_MASK 0x00000100U + +/*Controls DDL Bypass Modes*/ +#undef DDR_PHY_PGCR3_DDLBYPMODE_DEFVAL +#undef DDR_PHY_PGCR3_DDLBYPMODE_SHIFT +#undef DDR_PHY_PGCR3_DDLBYPMODE_MASK +#define DDR_PHY_PGCR3_DDLBYPMODE_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_DDLBYPMODE_SHIFT 6 +#define DDR_PHY_PGCR3_DDLBYPMODE_MASK 0x000000C0U + +/*IO Loop-Back Select*/ +#undef DDR_PHY_PGCR3_IOLB_DEFVAL +#undef DDR_PHY_PGCR3_IOLB_SHIFT +#undef DDR_PHY_PGCR3_IOLB_MASK +#define DDR_PHY_PGCR3_IOLB_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_IOLB_SHIFT 5 +#define DDR_PHY_PGCR3_IOLB_MASK 0x00000020U + +/*AC Receive FIFO Read Mode*/ +#undef DDR_PHY_PGCR3_RDMODE_DEFVAL +#undef DDR_PHY_PGCR3_RDMODE_SHIFT +#undef DDR_PHY_PGCR3_RDMODE_MASK +#define DDR_PHY_PGCR3_RDMODE_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_RDMODE_SHIFT 3 +#define DDR_PHY_PGCR3_RDMODE_MASK 0x00000018U + +/*Read FIFO Reset Disable*/ +#undef DDR_PHY_PGCR3_DISRST_DEFVAL +#undef DDR_PHY_PGCR3_DISRST_SHIFT +#undef DDR_PHY_PGCR3_DISRST_MASK +#define DDR_PHY_PGCR3_DISRST_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_DISRST_SHIFT 2 +#define DDR_PHY_PGCR3_DISRST_MASK 0x00000004U + +/*Clock Level when Clock Gating*/ +#undef DDR_PHY_PGCR3_CLKLEVEL_DEFVAL +#undef DDR_PHY_PGCR3_CLKLEVEL_SHIFT +#undef DDR_PHY_PGCR3_CLKLEVEL_MASK +#define DDR_PHY_PGCR3_CLKLEVEL_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_CLKLEVEL_SHIFT 0 +#define DDR_PHY_PGCR3_CLKLEVEL_MASK 0x00000003U + /*Frequency B Ratio Term*/ #undef DDR_PHY_PGCR5_FRQBT_DEFVAL #undef DDR_PHY_PGCR5_FRQBT_SHIFT @@ -7685,6 +7375,72 @@ #define DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT 0 #define DDR_PHY_RDIMMGCR1_TBCSTAB_MASK 0x00003FFFU +/*DDR4/DDR3 Control Word 7*/ +#undef DDR_PHY_RDIMMCR0_RC7_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC7_SHIFT +#undef DDR_PHY_RDIMMCR0_RC7_MASK +#define DDR_PHY_RDIMMCR0_RC7_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC7_SHIFT 28 +#define DDR_PHY_RDIMMCR0_RC7_MASK 0xF0000000U + +/*DDR4 Control Word 6 (Comman space Control Word) / DDR3 Reserved*/ +#undef DDR_PHY_RDIMMCR0_RC6_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC6_SHIFT +#undef DDR_PHY_RDIMMCR0_RC6_MASK +#define DDR_PHY_RDIMMCR0_RC6_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC6_SHIFT 24 +#define DDR_PHY_RDIMMCR0_RC6_MASK 0x0F000000U + +/*DDR4/DDR3 Control Word 5 (CK Driver Characteristics Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC5_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC5_SHIFT +#undef DDR_PHY_RDIMMCR0_RC5_MASK +#define DDR_PHY_RDIMMCR0_RC5_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC5_SHIFT 20 +#define DDR_PHY_RDIMMCR0_RC5_MASK 0x00F00000U + +/*DDR4 Control Word 4 (ODT and CKE Signals Driver Characteristics Control Word) / DDR3 Control Word 4 (Control Signals Driver C + aracteristics Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC4_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC4_SHIFT +#undef DDR_PHY_RDIMMCR0_RC4_MASK +#define DDR_PHY_RDIMMCR0_RC4_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC4_SHIFT 16 +#define DDR_PHY_RDIMMCR0_RC4_MASK 0x000F0000U + +/*DDR4 Control Word 3 (CA and CS Signals Driver Characteristics Control Word) / DDR3 Control Word 3 (Command/Address Signals Dr + ver Characteristrics Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC3_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC3_SHIFT +#undef DDR_PHY_RDIMMCR0_RC3_MASK +#define DDR_PHY_RDIMMCR0_RC3_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC3_SHIFT 12 +#define DDR_PHY_RDIMMCR0_RC3_MASK 0x0000F000U + +/*DDR4 Control Word 2 (Timing and IBT Control Word) / DDR3 Control Word 2 (Timing Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC2_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC2_SHIFT +#undef DDR_PHY_RDIMMCR0_RC2_MASK +#define DDR_PHY_RDIMMCR0_RC2_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC2_SHIFT 8 +#define DDR_PHY_RDIMMCR0_RC2_MASK 0x00000F00U + +/*DDR4/DDR3 Control Word 1 (Clock Driver Enable Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC1_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC1_SHIFT +#undef DDR_PHY_RDIMMCR0_RC1_MASK +#define DDR_PHY_RDIMMCR0_RC1_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC1_SHIFT 4 +#define DDR_PHY_RDIMMCR0_RC1_MASK 0x000000F0U + +/*DDR4/DDR3 Control Word 0 (Global Features Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC0_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC0_SHIFT +#undef DDR_PHY_RDIMMCR0_RC0_MASK +#define DDR_PHY_RDIMMCR0_RC0_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC0_SHIFT 0 +#define DDR_PHY_RDIMMCR0_RC0_MASK 0x0000000FU + /*Control Word 15*/ #undef DDR_PHY_RDIMMCR1_RC15_DEFVAL #undef DDR_PHY_RDIMMCR1_RC15_SHIFT @@ -8672,6 +8428,14 @@ #define DDR_PHY_CATR0_CA1BYTE0_SHIFT 0 #define DDR_PHY_CATR0_CA1BYTE0_MASK 0x0000000FU +/*LFSR seed for pseudo-random BIST patterns*/ +#undef DDR_PHY_BISTLSR_SEED_DEFVAL +#undef DDR_PHY_BISTLSR_SEED_SHIFT +#undef DDR_PHY_BISTLSR_SEED_MASK +#define DDR_PHY_BISTLSR_SEED_DEFVAL +#define DDR_PHY_BISTLSR_SEED_SHIFT 0 +#define DDR_PHY_BISTLSR_SEED_MASK 0xFFFFFFFFU + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_RIOCR5_RESERVED_31_16_DEFVAL #undef DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT @@ -9232,6 +8996,134 @@ #define DDR_PHY_VTCR1_HVIO_SHIFT 0 #define DDR_PHY_VTCR1_HVIO_MASK 0x00000001U +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_31_30_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_31_30_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_31_30_MASK +#define DDR_PHY_ACBDLR1_RESERVED_31_30_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_ACBDLR1_RESERVED_31_30_MASK 0xC0000000U + +/*Delay select for the BDL on Parity.*/ +#undef DDR_PHY_ACBDLR1_PARBD_DEFVAL +#undef DDR_PHY_ACBDLR1_PARBD_SHIFT +#undef DDR_PHY_ACBDLR1_PARBD_MASK +#define DDR_PHY_ACBDLR1_PARBD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_PARBD_SHIFT 24 +#define DDR_PHY_ACBDLR1_PARBD_MASK 0x3F000000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_23_22_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_23_22_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_23_22_MASK +#define DDR_PHY_ACBDLR1_RESERVED_23_22_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_23_22_SHIFT 22 +#define DDR_PHY_ACBDLR1_RESERVED_23_22_MASK 0x00C00000U + +/*Delay select for the BDL on Address A[16]. In DDR3 mode this pin is connected to WE.*/ +#undef DDR_PHY_ACBDLR1_A16BD_DEFVAL +#undef DDR_PHY_ACBDLR1_A16BD_SHIFT +#undef DDR_PHY_ACBDLR1_A16BD_MASK +#define DDR_PHY_ACBDLR1_A16BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_A16BD_SHIFT 16 +#define DDR_PHY_ACBDLR1_A16BD_MASK 0x003F0000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_15_14_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_15_14_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_15_14_MASK +#define DDR_PHY_ACBDLR1_RESERVED_15_14_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_15_14_SHIFT 14 +#define DDR_PHY_ACBDLR1_RESERVED_15_14_MASK 0x0000C000U + +/*Delay select for the BDL on Address A[17]. When not in DDR4 modemode this pin is connected to CAS.*/ +#undef DDR_PHY_ACBDLR1_A17BD_DEFVAL +#undef DDR_PHY_ACBDLR1_A17BD_SHIFT +#undef DDR_PHY_ACBDLR1_A17BD_MASK +#define DDR_PHY_ACBDLR1_A17BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_A17BD_SHIFT 8 +#define DDR_PHY_ACBDLR1_A17BD_MASK 0x00003F00U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_7_6_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_7_6_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_7_6_MASK +#define DDR_PHY_ACBDLR1_RESERVED_7_6_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_7_6_SHIFT 6 +#define DDR_PHY_ACBDLR1_RESERVED_7_6_MASK 0x000000C0U + +/*Delay select for the BDL on ACTN.*/ +#undef DDR_PHY_ACBDLR1_ACTBD_DEFVAL +#undef DDR_PHY_ACBDLR1_ACTBD_SHIFT +#undef DDR_PHY_ACBDLR1_ACTBD_MASK +#define DDR_PHY_ACBDLR1_ACTBD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_ACTBD_SHIFT 0 +#define DDR_PHY_ACBDLR1_ACTBD_MASK 0x0000003FU + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_31_30_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_31_30_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_31_30_MASK +#define DDR_PHY_ACBDLR2_RESERVED_31_30_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_ACBDLR2_RESERVED_31_30_MASK 0xC0000000U + +/*Delay select for the BDL on BG[1].*/ +#undef DDR_PHY_ACBDLR2_BG1BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BG1BD_SHIFT +#undef DDR_PHY_ACBDLR2_BG1BD_MASK +#define DDR_PHY_ACBDLR2_BG1BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BG1BD_SHIFT 24 +#define DDR_PHY_ACBDLR2_BG1BD_MASK 0x3F000000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_23_22_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_23_22_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_23_22_MASK +#define DDR_PHY_ACBDLR2_RESERVED_23_22_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_23_22_SHIFT 22 +#define DDR_PHY_ACBDLR2_RESERVED_23_22_MASK 0x00C00000U + +/*Delay select for the BDL on BG[0].*/ +#undef DDR_PHY_ACBDLR2_BG0BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BG0BD_SHIFT +#undef DDR_PHY_ACBDLR2_BG0BD_MASK +#define DDR_PHY_ACBDLR2_BG0BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BG0BD_SHIFT 16 +#define DDR_PHY_ACBDLR2_BG0BD_MASK 0x003F0000U + +/*Reser.ved Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_15_14_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_15_14_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_15_14_MASK +#define DDR_PHY_ACBDLR2_RESERVED_15_14_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_15_14_SHIFT 14 +#define DDR_PHY_ACBDLR2_RESERVED_15_14_MASK 0x0000C000U + +/*Delay select for the BDL on BA[1].*/ +#undef DDR_PHY_ACBDLR2_BA1BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BA1BD_SHIFT +#undef DDR_PHY_ACBDLR2_BA1BD_MASK +#define DDR_PHY_ACBDLR2_BA1BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BA1BD_SHIFT 8 +#define DDR_PHY_ACBDLR2_BA1BD_MASK 0x00003F00U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_7_6_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_7_6_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_7_6_MASK +#define DDR_PHY_ACBDLR2_RESERVED_7_6_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_7_6_SHIFT 6 +#define DDR_PHY_ACBDLR2_RESERVED_7_6_MASK 0x000000C0U + +/*Delay select for the BDL on BA[0].*/ +#undef DDR_PHY_ACBDLR2_BA0BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BA0BD_SHIFT +#undef DDR_PHY_ACBDLR2_BA0BD_MASK +#define DDR_PHY_ACBDLR2_BA0BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BA0BD_SHIFT 0 +#define DDR_PHY_ACBDLR2_BA0BD_MASK 0x0000003FU + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_ACBDLR6_RESERVED_31_30_DEFVAL #undef DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT @@ -9424,6 +9316,70 @@ #define DDR_PHY_ACBDLR8_A08BD_SHIFT 0 #define DDR_PHY_ACBDLR8_A08BD_MASK 0x0000003FU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_31_30_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_31_30_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_31_30_MASK +#define DDR_PHY_ACBDLR9_RESERVED_31_30_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_ACBDLR9_RESERVED_31_30_MASK 0xC0000000U + +/*Delay select for the BDL on Address A[15].*/ +#undef DDR_PHY_ACBDLR9_A15BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A15BD_SHIFT +#undef DDR_PHY_ACBDLR9_A15BD_MASK +#define DDR_PHY_ACBDLR9_A15BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A15BD_SHIFT 24 +#define DDR_PHY_ACBDLR9_A15BD_MASK 0x3F000000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_23_22_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_23_22_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_23_22_MASK +#define DDR_PHY_ACBDLR9_RESERVED_23_22_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_23_22_SHIFT 22 +#define DDR_PHY_ACBDLR9_RESERVED_23_22_MASK 0x00C00000U + +/*Delay select for the BDL on Address A[14].*/ +#undef DDR_PHY_ACBDLR9_A14BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A14BD_SHIFT +#undef DDR_PHY_ACBDLR9_A14BD_MASK +#define DDR_PHY_ACBDLR9_A14BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A14BD_SHIFT 16 +#define DDR_PHY_ACBDLR9_A14BD_MASK 0x003F0000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_15_14_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_15_14_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_15_14_MASK +#define DDR_PHY_ACBDLR9_RESERVED_15_14_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_15_14_SHIFT 14 +#define DDR_PHY_ACBDLR9_RESERVED_15_14_MASK 0x0000C000U + +/*Delay select for the BDL on Address A[13].*/ +#undef DDR_PHY_ACBDLR9_A13BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A13BD_SHIFT +#undef DDR_PHY_ACBDLR9_A13BD_MASK +#define DDR_PHY_ACBDLR9_A13BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A13BD_SHIFT 8 +#define DDR_PHY_ACBDLR9_A13BD_MASK 0x00003F00U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_7_6_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_7_6_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_7_6_MASK +#define DDR_PHY_ACBDLR9_RESERVED_7_6_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_7_6_SHIFT 6 +#define DDR_PHY_ACBDLR9_RESERVED_7_6_MASK 0x000000C0U + +/*Delay select for the BDL on Address A[12].*/ +#undef DDR_PHY_ACBDLR9_A12BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A12BD_SHIFT +#undef DDR_PHY_ACBDLR9_A12BD_MASK +#define DDR_PHY_ACBDLR9_A12BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A12BD_SHIFT 0 +#define DDR_PHY_ACBDLR9_A12BD_MASK 0x0000003FU + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_ZQCR_RESERVED_31_26_DEFVAL #undef DDR_PHY_ZQCR_RESERVED_31_26_SHIFT @@ -14464,6 +14420,158 @@ #define DDR_PHY_DX8GTR0_DGSL_SHIFT 0 #define DDR_PHY_DX8GTR0_DGSL_MASK 0x0000001FU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL0OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL0OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL0OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL0OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL0OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL0OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL0OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL0OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL0OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL0OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL0OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL0OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL0OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL0OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL0OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL0OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBMODE_MASK +#define DDR_PHY_DX8SL0OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL0OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL0OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL0OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL0OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL0OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL0OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL0OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL0OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL0OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL0OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL0OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL0OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL0OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL0OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL0OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL0OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL0OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL0OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL0OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL0OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL0OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL0OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL0OSC_DLTST_MASK +#define DDR_PHY_DX8SL0OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL0OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL0OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL0OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL0OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL0OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL0OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL0OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL0OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL0OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL0OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL0OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL0OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL0OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL0OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL0OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL0OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL0OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL0OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL0OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL0OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL0OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL0OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL0OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL0OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL0OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL0OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCEN_MASK +#define DDR_PHY_DX8SL0OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL0OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT @@ -14752,6 +14860,158 @@ #define DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL0IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL1OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL1OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL1OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL1OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL1OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL1OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL1OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL1OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL1OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL1OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL1OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL1OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL1OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL1OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL1OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL1OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBMODE_MASK +#define DDR_PHY_DX8SL1OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL1OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL1OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL1OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL1OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL1OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL1OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL1OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL1OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL1OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL1OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL1OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL1OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL1OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL1OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL1OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL1OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL1OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL1OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL1OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL1OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL1OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL1OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL1OSC_DLTST_MASK +#define DDR_PHY_DX8SL1OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL1OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL1OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL1OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL1OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL1OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL1OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL1OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL1OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL1OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL1OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL1OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL1OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL1OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL1OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL1OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL1OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL1OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL1OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL1OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL1OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL1OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL1OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL1OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL1OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL1OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL1OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCEN_MASK +#define DDR_PHY_DX8SL1OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL1OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT @@ -15040,6 +15300,158 @@ #define DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL1IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL2OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL2OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL2OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL2OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL2OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL2OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL2OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL2OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL2OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL2OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL2OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL2OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL2OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL2OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL2OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL2OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBMODE_MASK +#define DDR_PHY_DX8SL2OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL2OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL2OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL2OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL2OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL2OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL2OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL2OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL2OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL2OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL2OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL2OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL2OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL2OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL2OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL2OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL2OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL2OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL2OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL2OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL2OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL2OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL2OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL2OSC_DLTST_MASK +#define DDR_PHY_DX8SL2OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL2OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL2OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL2OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL2OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL2OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL2OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL2OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL2OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL2OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL2OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL2OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL2OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL2OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL2OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL2OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL2OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL2OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL2OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL2OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL2OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL2OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL2OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL2OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL2OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL2OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL2OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCEN_MASK +#define DDR_PHY_DX8SL2OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL2OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT @@ -15328,6 +15740,158 @@ #define DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL2IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL3OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL3OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL3OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL3OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL3OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL3OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL3OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL3OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL3OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL3OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL3OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL3OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL3OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL3OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL3OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL3OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBMODE_MASK +#define DDR_PHY_DX8SL3OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL3OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL3OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL3OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL3OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL3OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL3OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL3OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL3OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL3OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL3OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL3OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL3OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL3OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL3OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL3OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL3OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL3OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL3OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL3OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL3OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL3OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL3OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL3OSC_DLTST_MASK +#define DDR_PHY_DX8SL3OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL3OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL3OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL3OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL3OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL3OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL3OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL3OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL3OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL3OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL3OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL3OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL3OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL3OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL3OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL3OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL3OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL3OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL3OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL3OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL3OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL3OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL3OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL3OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL3OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL3OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL3OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCEN_MASK +#define DDR_PHY_DX8SL3OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL3OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT @@ -15616,6 +16180,158 @@ #define DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL3IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL4OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL4OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL4OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL4OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL4OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL4OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL4OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL4OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL4OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL4OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL4OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL4OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL4OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL4OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL4OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL4OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBMODE_MASK +#define DDR_PHY_DX8SL4OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL4OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL4OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL4OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL4OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL4OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL4OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL4OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL4OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL4OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL4OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL4OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL4OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL4OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL4OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL4OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL4OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL4OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL4OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL4OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL4OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL4OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL4OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL4OSC_DLTST_MASK +#define DDR_PHY_DX8SL4OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL4OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL4OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL4OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL4OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL4OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL4OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL4OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL4OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL4OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL4OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL4OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL4OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL4OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL4OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL4OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL4OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL4OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL4OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL4OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL4OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL4OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL4OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL4OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL4OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL4OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL4OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCEN_MASK +#define DDR_PHY_DX8SL4OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL4OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT @@ -22022,208 +22738,208 @@ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT 0 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK 0x00000001U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT 12 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK 0x00001000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT 1 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK 0x00000002U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT 13 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK 0x00002000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT 2 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK 0x00000004U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT 14 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK 0x00004000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT 3 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK 0x00000008U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT 15 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK 0x00008000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT 4 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK 0x00000010U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT 16 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK 0x00010000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT 5 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK 0x00000020U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT 17 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK 0x00020000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT 6 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK 0x00000040U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT 18 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK 0x00040000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT 7 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK 0x00000080U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT 19 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK 0x00080000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT 8 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK 0x00000100U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT 20 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK 0x00100000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT 9 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK 0x00000200U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT 21 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK 0x00200000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT 10 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK 0x00000400U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT 22 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK 0x00400000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT 11 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK 0x00000800U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT 23 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK 0x00800000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT 12 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK 0x00001000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT 24 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK 0x01000000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT 13 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK 0x00002000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT 25 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK 0x02000000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT 14 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK 0x00004000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT 0 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK 0x00000001U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT 15 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK 0x00008000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT 1 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK 0x00000002U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT 16 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK 0x00010000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT 2 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK 0x00000004U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT 17 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK 0x00020000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT 3 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK 0x00000008U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT 18 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK 0x00040000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT 4 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK 0x00000010U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT 19 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK 0x00080000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT 5 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK 0x00000020U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT 20 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK 0x00100000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT 6 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK 0x00000040U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT 21 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK 0x00200000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT 7 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK 0x00000080U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT 22 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK 0x00400000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT 8 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK 0x00000100U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT 23 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK 0x00800000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT 9 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK 0x00000200U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT 24 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK 0x01000000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT 10 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK 0x00000400U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT 25 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK 0x02000000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT 11 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK 0x00000800U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL @@ -23716,10 +24432,14 @@ #define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_DEFVAL 0x00000000 #define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT 0 #define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK 0x00000001U +#undef CRL_APB_RST_LPD_IOU2_OFFSET +#define CRL_APB_RST_LPD_IOU2_OFFSET 0XFF5E0238 #undef CRL_APB_RST_LPD_IOU0_OFFSET #define CRL_APB_RST_LPD_IOU0_OFFSET 0XFF5E0230 #undef CRL_APB_RST_LPD_IOU2_OFFSET #define CRL_APB_RST_LPD_IOU2_OFFSET 0XFF5E0238 +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_OFFSET +#define IOU_SLCR_IOU_TAPDLY_BYPASS_OFFSET 0XFF180390 #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef CRF_APB_RST_FPD_TOP_OFFSET @@ -23732,6 +24452,8 @@ #define IOU_SLCR_SD_CONFIG_REG2_OFFSET 0XFF180320 #undef IOU_SLCR_SD_CONFIG_REG1_OFFSET #define IOU_SLCR_SD_CONFIG_REG1_OFFSET 0XFF18031C +#undef IOU_SLCR_SD_CONFIG_REG3_OFFSET +#define IOU_SLCR_SD_CONFIG_REG3_OFFSET 0XFF180324 #undef CRL_APB_RST_LPD_IOU2_OFFSET #define CRL_APB_RST_LPD_IOU2_OFFSET 0XFF5E0238 #undef CRL_APB_RST_LPD_IOU2_OFFSET @@ -23766,6 +24488,18 @@ #define APU_ACE_CTRL_OFFSET 0XFD5C0060 #undef RTC_CONTROL_OFFSET #define RTC_CONTROL_OFFSET 0XFFA60040 +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_OFFSET +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_OFFSET 0XFF260020 +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_OFFSET +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_OFFSET 0XFF260000 + +/*Block level reset*/ +#undef CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_DEFVAL +#undef CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_SHIFT +#undef CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_MASK +#define CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_DEFVAL 0x0017FFFF +#define CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_SHIFT 20 +#define CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_MASK 0x00100000U /*GEM 3 reset*/ #undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL @@ -23783,6 +24517,14 @@ #define CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT 0 #define CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK 0x00000001U +/*0: Do not by pass the tap delays on the Rx clock signal of LQSPI 1: Bypass the Tap delay on the Rx clock signal of LQSPI*/ +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_DEFVAL +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_SHIFT +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_MASK +#define IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_DEFVAL 0x00000007 +#define IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_SHIFT 2 +#define IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_MASK 0x00000004U + /*USB 0 reset for control registers*/ #undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL #undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT @@ -23952,6 +24694,16 @@ #define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT 23 #define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK 0x7F800000U +/*This is the Timer Count for Re-Tuning Timer for Re-Tuning Mode 1 to 3. Setting to 4'b0 disables Re-Tuning Timer. 0h - Get inf + rmation via other source 1h = 1 seconds 2h = 2 seconds 3h = 4 seconds 4h = 8 seconds -- n = 2(n-1) seconds -- Bh = 1024 secon + s Fh - Ch = Reserved*/ +#undef IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_DEFVAL +#undef IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_SHIFT +#undef IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_MASK +#define IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_DEFVAL 0x06070607 +#define IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_SHIFT 22 +#define IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_MASK 0x03C00000U + /*Block level reset*/ #undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_DEFVAL #undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT @@ -24442,6 +25194,80 @@ #define RTC_CONTROL_BATTERY_DISABLE_DEFVAL 0x01000000 #define RTC_CONTROL_BATTERY_DISABLE_SHIFT 31 #define RTC_CONTROL_BATTERY_DISABLE_MASK 0x80000000U + +/*Frequency in number of ticks per second. Valid range from 10 MHz to 100 MHz.*/ +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_DEFVAL +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_SHIFT +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_MASK +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_DEFVAL +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_SHIFT 0 +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_MASK 0xFFFFFFFFU + +/*Enable 0: The counter is disabled and not incrementing. 1: The counter is enabled and is incrementing.*/ +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_DEFVAL +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_SHIFT +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_MASK +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_DEFVAL 0x00000000 +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_SHIFT 0 +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_MASK 0x00000001U +#undef LPD_XPPU_CFG_IEN_OFFSET +#define LPD_XPPU_CFG_IEN_OFFSET 0XFF980018 + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_APER_PARITY_DEFVAL +#undef LPD_XPPU_CFG_IEN_APER_PARITY_SHIFT +#undef LPD_XPPU_CFG_IEN_APER_PARITY_MASK +#define LPD_XPPU_CFG_IEN_APER_PARITY_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_APER_PARITY_SHIFT 7 +#define LPD_XPPU_CFG_IEN_APER_PARITY_MASK 0x00000080U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_APER_TZ_DEFVAL +#undef LPD_XPPU_CFG_IEN_APER_TZ_SHIFT +#undef LPD_XPPU_CFG_IEN_APER_TZ_MASK +#define LPD_XPPU_CFG_IEN_APER_TZ_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_APER_TZ_SHIFT 6 +#define LPD_XPPU_CFG_IEN_APER_TZ_MASK 0x00000040U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_APER_PERM_DEFVAL +#undef LPD_XPPU_CFG_IEN_APER_PERM_SHIFT +#undef LPD_XPPU_CFG_IEN_APER_PERM_MASK +#define LPD_XPPU_CFG_IEN_APER_PERM_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_APER_PERM_SHIFT 5 +#define LPD_XPPU_CFG_IEN_APER_PERM_MASK 0x00000020U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_MID_PARITY_DEFVAL +#undef LPD_XPPU_CFG_IEN_MID_PARITY_SHIFT +#undef LPD_XPPU_CFG_IEN_MID_PARITY_MASK +#define LPD_XPPU_CFG_IEN_MID_PARITY_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_MID_PARITY_SHIFT 3 +#define LPD_XPPU_CFG_IEN_MID_PARITY_MASK 0x00000008U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_MID_RO_DEFVAL +#undef LPD_XPPU_CFG_IEN_MID_RO_SHIFT +#undef LPD_XPPU_CFG_IEN_MID_RO_MASK +#define LPD_XPPU_CFG_IEN_MID_RO_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_MID_RO_SHIFT 2 +#define LPD_XPPU_CFG_IEN_MID_RO_MASK 0x00000004U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_MID_MISS_DEFVAL +#undef LPD_XPPU_CFG_IEN_MID_MISS_SHIFT +#undef LPD_XPPU_CFG_IEN_MID_MISS_MASK +#define LPD_XPPU_CFG_IEN_MID_MISS_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_MID_MISS_SHIFT 1 +#define LPD_XPPU_CFG_IEN_MID_MISS_MASK 0x00000002U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_INV_APB_DEFVAL +#undef LPD_XPPU_CFG_IEN_INV_APB_SHIFT +#undef LPD_XPPU_CFG_IEN_INV_APB_MASK +#define LPD_XPPU_CFG_IEN_INV_APB_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_INV_APB_SHIFT 0 +#define LPD_XPPU_CFG_IEN_INV_APB_MASK 0x00000001U #undef SERDES_PLL_REF_SEL0_OFFSET #define SERDES_PLL_REF_SEL0_OFFSET 0XFD410000 #undef SERDES_PLL_REF_SEL1_OFFSET @@ -24508,6 +25334,126 @@ #define SERDES_L3_TX_DIG_TM_61_OFFSET 0XFD40C0F4 #undef SERDES_L3_TXPMA_ST_0_OFFSET #define SERDES_L3_TXPMA_ST_0_OFFSET 0XFD40CB00 +#undef SERDES_L0_TM_AUX_0_OFFSET +#define SERDES_L0_TM_AUX_0_OFFSET 0XFD4010CC +#undef SERDES_L2_TM_AUX_0_OFFSET +#define SERDES_L2_TM_AUX_0_OFFSET 0XFD4090CC +#undef SERDES_L0_TM_DIG_8_OFFSET +#define SERDES_L0_TM_DIG_8_OFFSET 0XFD401074 +#undef SERDES_L1_TM_DIG_8_OFFSET +#define SERDES_L1_TM_DIG_8_OFFSET 0XFD405074 +#undef SERDES_L2_TM_DIG_8_OFFSET +#define SERDES_L2_TM_DIG_8_OFFSET 0XFD409074 +#undef SERDES_L3_TM_DIG_8_OFFSET +#define SERDES_L3_TM_DIG_8_OFFSET 0XFD40D074 +#undef SERDES_L0_TM_MISC2_OFFSET +#define SERDES_L0_TM_MISC2_OFFSET 0XFD40189C +#undef SERDES_L0_TM_IQ_ILL1_OFFSET +#define SERDES_L0_TM_IQ_ILL1_OFFSET 0XFD4018F8 +#undef SERDES_L0_TM_IQ_ILL2_OFFSET +#define SERDES_L0_TM_IQ_ILL2_OFFSET 0XFD4018FC +#undef SERDES_L0_TM_ILL12_OFFSET +#define SERDES_L0_TM_ILL12_OFFSET 0XFD401990 +#undef SERDES_L0_TM_E_ILL1_OFFSET +#define SERDES_L0_TM_E_ILL1_OFFSET 0XFD401924 +#undef SERDES_L0_TM_E_ILL2_OFFSET +#define SERDES_L0_TM_E_ILL2_OFFSET 0XFD401928 +#undef SERDES_L0_TM_IQ_ILL3_OFFSET +#define SERDES_L0_TM_IQ_ILL3_OFFSET 0XFD401900 +#undef SERDES_L0_TM_E_ILL3_OFFSET +#define SERDES_L0_TM_E_ILL3_OFFSET 0XFD40192C +#undef SERDES_L0_TM_ILL8_OFFSET +#define SERDES_L0_TM_ILL8_OFFSET 0XFD401980 +#undef SERDES_L0_TM_IQ_ILL8_OFFSET +#define SERDES_L0_TM_IQ_ILL8_OFFSET 0XFD401914 +#undef SERDES_L0_TM_IQ_ILL9_OFFSET +#define SERDES_L0_TM_IQ_ILL9_OFFSET 0XFD401918 +#undef SERDES_L0_TM_E_ILL8_OFFSET +#define SERDES_L0_TM_E_ILL8_OFFSET 0XFD401940 +#undef SERDES_L0_TM_E_ILL9_OFFSET +#define SERDES_L0_TM_E_ILL9_OFFSET 0XFD401944 +#undef SERDES_L2_TM_MISC2_OFFSET +#define SERDES_L2_TM_MISC2_OFFSET 0XFD40989C +#undef SERDES_L2_TM_IQ_ILL1_OFFSET +#define SERDES_L2_TM_IQ_ILL1_OFFSET 0XFD4098F8 +#undef SERDES_L2_TM_IQ_ILL2_OFFSET +#define SERDES_L2_TM_IQ_ILL2_OFFSET 0XFD4098FC +#undef SERDES_L2_TM_ILL12_OFFSET +#define SERDES_L2_TM_ILL12_OFFSET 0XFD409990 +#undef SERDES_L2_TM_E_ILL1_OFFSET +#define SERDES_L2_TM_E_ILL1_OFFSET 0XFD409924 +#undef SERDES_L2_TM_E_ILL2_OFFSET +#define SERDES_L2_TM_E_ILL2_OFFSET 0XFD409928 +#undef SERDES_L2_TM_IQ_ILL3_OFFSET +#define SERDES_L2_TM_IQ_ILL3_OFFSET 0XFD409900 +#undef SERDES_L2_TM_E_ILL3_OFFSET +#define SERDES_L2_TM_E_ILL3_OFFSET 0XFD40992C +#undef SERDES_L2_TM_ILL8_OFFSET +#define SERDES_L2_TM_ILL8_OFFSET 0XFD409980 +#undef SERDES_L2_TM_IQ_ILL8_OFFSET +#define SERDES_L2_TM_IQ_ILL8_OFFSET 0XFD409914 +#undef SERDES_L2_TM_IQ_ILL9_OFFSET +#define SERDES_L2_TM_IQ_ILL9_OFFSET 0XFD409918 +#undef SERDES_L2_TM_E_ILL8_OFFSET +#define SERDES_L2_TM_E_ILL8_OFFSET 0XFD409940 +#undef SERDES_L2_TM_E_ILL9_OFFSET +#define SERDES_L2_TM_E_ILL9_OFFSET 0XFD409944 +#undef SERDES_L3_TM_MISC2_OFFSET +#define SERDES_L3_TM_MISC2_OFFSET 0XFD40D89C +#undef SERDES_L3_TM_IQ_ILL1_OFFSET +#define SERDES_L3_TM_IQ_ILL1_OFFSET 0XFD40D8F8 +#undef SERDES_L3_TM_IQ_ILL2_OFFSET +#define SERDES_L3_TM_IQ_ILL2_OFFSET 0XFD40D8FC +#undef SERDES_L3_TM_ILL12_OFFSET +#define SERDES_L3_TM_ILL12_OFFSET 0XFD40D990 +#undef SERDES_L3_TM_E_ILL1_OFFSET +#define SERDES_L3_TM_E_ILL1_OFFSET 0XFD40D924 +#undef SERDES_L3_TM_E_ILL2_OFFSET +#define SERDES_L3_TM_E_ILL2_OFFSET 0XFD40D928 +#undef SERDES_L3_TM_ILL11_OFFSET +#define SERDES_L3_TM_ILL11_OFFSET 0XFD40D98C +#undef SERDES_L3_TM_IQ_ILL3_OFFSET +#define SERDES_L3_TM_IQ_ILL3_OFFSET 0XFD40D900 +#undef SERDES_L3_TM_E_ILL3_OFFSET +#define SERDES_L3_TM_E_ILL3_OFFSET 0XFD40D92C +#undef SERDES_L3_TM_ILL8_OFFSET +#define SERDES_L3_TM_ILL8_OFFSET 0XFD40D980 +#undef SERDES_L3_TM_IQ_ILL8_OFFSET +#define SERDES_L3_TM_IQ_ILL8_OFFSET 0XFD40D914 +#undef SERDES_L3_TM_IQ_ILL9_OFFSET +#define SERDES_L3_TM_IQ_ILL9_OFFSET 0XFD40D918 +#undef SERDES_L3_TM_E_ILL8_OFFSET +#define SERDES_L3_TM_E_ILL8_OFFSET 0XFD40D940 +#undef SERDES_L3_TM_E_ILL9_OFFSET +#define SERDES_L3_TM_E_ILL9_OFFSET 0XFD40D944 +#undef SERDES_L0_TM_DIG_21_OFFSET +#define SERDES_L0_TM_DIG_21_OFFSET 0XFD4010A8 +#undef SERDES_L0_TM_DIG_10_OFFSET +#define SERDES_L0_TM_DIG_10_OFFSET 0XFD40107C +#undef SERDES_L0_TM_RST_DLY_OFFSET +#define SERDES_L0_TM_RST_DLY_OFFSET 0XFD4019A4 +#undef SERDES_L0_TM_ANA_BYP_15_OFFSET +#define SERDES_L0_TM_ANA_BYP_15_OFFSET 0XFD401038 +#undef SERDES_L0_TM_ANA_BYP_12_OFFSET +#define SERDES_L0_TM_ANA_BYP_12_OFFSET 0XFD40102C +#undef SERDES_L1_TM_RST_DLY_OFFSET +#define SERDES_L1_TM_RST_DLY_OFFSET 0XFD4059A4 +#undef SERDES_L1_TM_ANA_BYP_15_OFFSET +#define SERDES_L1_TM_ANA_BYP_15_OFFSET 0XFD405038 +#undef SERDES_L1_TM_ANA_BYP_12_OFFSET +#define SERDES_L1_TM_ANA_BYP_12_OFFSET 0XFD40502C +#undef SERDES_L2_TM_RST_DLY_OFFSET +#define SERDES_L2_TM_RST_DLY_OFFSET 0XFD4099A4 +#undef SERDES_L2_TM_ANA_BYP_15_OFFSET +#define SERDES_L2_TM_ANA_BYP_15_OFFSET 0XFD409038 +#undef SERDES_L2_TM_ANA_BYP_12_OFFSET +#define SERDES_L2_TM_ANA_BYP_12_OFFSET 0XFD40902C +#undef SERDES_L3_TM_RST_DLY_OFFSET +#define SERDES_L3_TM_RST_DLY_OFFSET 0XFD40D9A4 +#undef SERDES_L3_TM_ANA_BYP_15_OFFSET +#define SERDES_L3_TM_ANA_BYP_15_OFFSET 0XFD40D038 +#undef SERDES_L3_TM_ANA_BYP_12_OFFSET +#define SERDES_L3_TM_ANA_BYP_12_OFFSET 0XFD40D02C #undef SERDES_ICM_CFG0_OFFSET #define SERDES_ICM_CFG0_OFFSET 0XFD410010 #undef SERDES_ICM_CFG1_OFFSET @@ -24516,10 +25462,22 @@ #define SERDES_L1_TXPMD_TM_45_OFFSET 0XFD404CB4 #undef SERDES_L1_TX_ANA_TM_118_OFFSET #define SERDES_L1_TX_ANA_TM_118_OFFSET 0XFD4041D8 +#undef SERDES_L3_TX_ANA_TM_118_OFFSET +#define SERDES_L3_TX_ANA_TM_118_OFFSET 0XFD40C1D8 +#undef SERDES_L3_TM_CDR5_OFFSET +#define SERDES_L3_TM_CDR5_OFFSET 0XFD40DC14 +#undef SERDES_L3_TM_CDR16_OFFSET +#define SERDES_L3_TM_CDR16_OFFSET 0XFD40DC40 +#undef SERDES_L3_TM_EQ0_OFFSET +#define SERDES_L3_TM_EQ0_OFFSET 0XFD40D94C +#undef SERDES_L3_TM_EQ1_OFFSET +#define SERDES_L3_TM_EQ1_OFFSET 0XFD40D950 #undef SERDES_L1_TXPMD_TM_48_OFFSET #define SERDES_L1_TXPMD_TM_48_OFFSET 0XFD404CC0 #undef SERDES_L1_TX_ANA_TM_18_OFFSET #define SERDES_L1_TX_ANA_TM_18_OFFSET 0XFD404048 +#undef SERDES_L3_TX_ANA_TM_18_OFFSET +#define SERDES_L3_TX_ANA_TM_18_OFFSET 0XFD40C048 /*PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135 @@ -24921,6 +25879,486 @@ #define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT 4 #define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK 0x000000F0U +/*Spare- not used*/ +#undef SERDES_L0_TM_AUX_0_BIT_2_DEFVAL +#undef SERDES_L0_TM_AUX_0_BIT_2_SHIFT +#undef SERDES_L0_TM_AUX_0_BIT_2_MASK +#define SERDES_L0_TM_AUX_0_BIT_2_DEFVAL 0x00000000 +#define SERDES_L0_TM_AUX_0_BIT_2_SHIFT 5 +#define SERDES_L0_TM_AUX_0_BIT_2_MASK 0x00000020U + +/*Spare- not used*/ +#undef SERDES_L2_TM_AUX_0_BIT_2_DEFVAL +#undef SERDES_L2_TM_AUX_0_BIT_2_SHIFT +#undef SERDES_L2_TM_AUX_0_BIT_2_MASK +#define SERDES_L2_TM_AUX_0_BIT_2_DEFVAL 0x00000000 +#define SERDES_L2_TM_AUX_0_BIT_2_SHIFT 5 +#define SERDES_L2_TM_AUX_0_BIT_2_MASK 0x00000020U + +/*Enable Eye Surf*/ +#undef SERDES_L0_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L0_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L0_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L0_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L0_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L0_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*Enable Eye Surf*/ +#undef SERDES_L1_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L1_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L1_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L1_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L1_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L1_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*Enable Eye Surf*/ +#undef SERDES_L2_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L2_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L2_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L2_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L2_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L2_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*Enable Eye Surf*/ +#undef SERDES_L3_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L3_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L3_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L3_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L3_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L3_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*ILL calib counts BYPASSED with calcode bits*/ +#undef SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL +#undef SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT +#undef SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK +#define SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL 0x00000000 +#define SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT 7 +#define SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK 0x00000080U + +/*IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL +#undef SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT +#undef SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK +#define SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK 0x000000FFU + +/*IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL +#undef SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT +#undef SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK +#define SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK 0x000000FFU + +/*G1A pll ctr bypass value*/ +#undef SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL +#undef SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT +#undef SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK +#define SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT 0 +#define SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK 0x000000FFU + +/*E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL +#undef SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT +#undef SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK +#define SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT 0 +#define SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK 0x000000FFU + +/*E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL +#undef SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT +#undef SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK +#define SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT 0 +#define SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK 0x000000FFU + +/*IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL +#undef SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT +#undef SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK +#define SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK 0x000000FFU + +/*E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL +#undef SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT +#undef SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK +#define SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT 0 +#define SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK 0x000000FFU + +/*ILL calibration code change wait time*/ +#undef SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL +#undef SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT +#undef SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_MASK +#define SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL 0x00000002 +#define SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT 0 +#define SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_MASK 0x000000FFU + +/*IQ ILL polytrim bypass value*/ +#undef SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL +#undef SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT +#undef SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK +#define SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass IQ polytrim*/ +#undef SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL +#undef SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT +#undef SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK +#define SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK 0x00000001U + +/*E ILL polytrim bypass value*/ +#undef SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL +#undef SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT +#undef SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK +#define SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass E polytrim*/ +#undef SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL +#undef SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT +#undef SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK +#define SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT 0 +#define SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK 0x00000001U + +/*ILL calib counts BYPASSED with calcode bits*/ +#undef SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL +#undef SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT +#undef SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK +#define SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL 0x00000000 +#define SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT 7 +#define SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK 0x00000080U + +/*IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL +#undef SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT +#undef SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK +#define SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK 0x000000FFU + +/*IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL +#undef SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT +#undef SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK +#define SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK 0x000000FFU + +/*G1A pll ctr bypass value*/ +#undef SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL +#undef SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT +#undef SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK +#define SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT 0 +#define SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK 0x000000FFU + +/*E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL +#undef SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT +#undef SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK +#define SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT 0 +#define SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK 0x000000FFU + +/*E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL +#undef SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT +#undef SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK +#define SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT 0 +#define SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK 0x000000FFU + +/*IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL +#undef SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT +#undef SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK +#define SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK 0x000000FFU + +/*E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL +#undef SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT +#undef SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK +#define SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT 0 +#define SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK 0x000000FFU + +/*ILL calibration code change wait time*/ +#undef SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL +#undef SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT +#undef SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_MASK +#define SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL 0x00000002 +#define SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT 0 +#define SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_MASK 0x000000FFU + +/*IQ ILL polytrim bypass value*/ +#undef SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL +#undef SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT +#undef SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK +#define SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass IQ polytrim*/ +#undef SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL +#undef SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT +#undef SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK +#define SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK 0x00000001U + +/*E ILL polytrim bypass value*/ +#undef SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL +#undef SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT +#undef SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK +#define SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass E polytrim*/ +#undef SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL +#undef SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT +#undef SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK +#define SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT 0 +#define SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK 0x00000001U + +/*ILL calib counts BYPASSED with calcode bits*/ +#undef SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL +#undef SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT +#undef SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK +#define SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL 0x00000000 +#define SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT 7 +#define SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK 0x00000080U + +/*IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL +#undef SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT +#undef SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK +#define SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK 0x000000FFU + +/*IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL +#undef SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT +#undef SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK +#define SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK 0x000000FFU + +/*G1A pll ctr bypass value*/ +#undef SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL +#undef SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT +#undef SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK +#define SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT 0 +#define SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK 0x000000FFU + +/*E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL +#undef SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT +#undef SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK +#define SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT 0 +#define SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK 0x000000FFU + +/*E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL +#undef SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT +#undef SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK +#define SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT 0 +#define SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK 0x000000FFU + +/*G2A_PCIe1 PLL ctr bypass value*/ +#undef SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_DEFVAL +#undef SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_SHIFT +#undef SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_MASK +#define SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_SHIFT 4 +#define SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_MASK 0x000000F0U + +/*IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL +#undef SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT +#undef SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK +#define SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK 0x000000FFU + +/*E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL +#undef SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT +#undef SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK +#define SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT 0 +#define SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK 0x000000FFU + +/*ILL calibration code change wait time*/ +#undef SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL +#undef SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT +#undef SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_MASK +#define SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL 0x00000002 +#define SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT 0 +#define SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_MASK 0x000000FFU + +/*IQ ILL polytrim bypass value*/ +#undef SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL +#undef SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT +#undef SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK +#define SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass IQ polytrim*/ +#undef SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL +#undef SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT +#undef SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK +#define SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK 0x00000001U + +/*E ILL polytrim bypass value*/ +#undef SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL +#undef SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT +#undef SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK +#define SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass E polytrim*/ +#undef SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL +#undef SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT +#undef SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK +#define SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT 0 +#define SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK 0x00000001U + +/*pre lock comma count threshold. 2'b 00 : 3, 2'b 01 : 5, 2'b 10 : 10, 2'b 11 : 20*/ +#undef SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_DEFVAL +#undef SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_SHIFT +#undef SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_MASK +#define SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_DEFVAL 0x00000000 +#define SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_SHIFT 0 +#define SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_MASK 0x00000003U + +/*CDR lock wait time. (1-16 us). cdr_lock_wait_time = 4'b xxxx + 4'b 0001*/ +#undef SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_DEFVAL +#undef SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_SHIFT +#undef SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_MASK +#define SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_DEFVAL 0x00000001 +#define SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_SHIFT 0 +#define SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_MASK 0x0000000FU + +/*Delay apb reset by specified amount*/ +#undef SERDES_L0_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L0_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L0_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L0_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L0_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L0_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + +/*Delay apb reset by specified amount*/ +#undef SERDES_L1_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L1_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L1_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L1_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L1_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L1_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + +/*Delay apb reset by specified amount*/ +#undef SERDES_L2_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L2_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L2_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L2_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L2_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L2_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + +/*Delay apb reset by specified amount*/ +#undef SERDES_L3_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L3_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L3_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L3_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L3_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L3_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + /*Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse , 7 - Unused*/ #undef SERDES_ICM_CFG0_L0_ICM_CFG_DEFVAL @@ -25005,6 +26443,62 @@ #define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT 0 #define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK 0x00000001U +/*Test register force for enabling/disablign TX deemphasis bits <17:0>*/ +#undef SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL +#undef SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT +#undef SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK +#define SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL 0x00000000 +#define SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT 0 +#define SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK 0x00000001U + +/*FPHL FSM accumulate cycles*/ +#undef SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_DEFVAL +#undef SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_SHIFT +#undef SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_MASK +#define SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_DEFVAL 0x00000000 +#define SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_SHIFT 5 +#define SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_MASK 0x000000E0U + +/*FFL Phase0 int gain aka 2ol SD update rate*/ +#undef SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_DEFVAL +#undef SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_SHIFT +#undef SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_MASK +#define SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_DEFVAL 0x00000000 +#define SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_SHIFT 0 +#define SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_MASK 0x0000001FU + +/*FFL Phase0 prop gain aka 1ol SD update rate*/ +#undef SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_DEFVAL +#undef SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_SHIFT +#undef SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_MASK +#define SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_DEFVAL 0x00000000 +#define SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_SHIFT 0 +#define SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_MASK 0x0000001FU + +/*EQ stg 2 controls BYPASSED*/ +#undef SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_DEFVAL +#undef SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_SHIFT +#undef SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_MASK +#define SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_DEFVAL 0x00000000 +#define SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_SHIFT 5 +#define SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_MASK 0x00000020U + +/*EQ STG2 RL PROG*/ +#undef SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_DEFVAL +#undef SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_SHIFT +#undef SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_MASK +#define SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_DEFVAL 0x00000000 +#define SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_SHIFT 0 +#define SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_MASK 0x00000003U + +/*EQ stg 2 preamp mode val*/ +#undef SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_DEFVAL +#undef SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_SHIFT +#undef SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_MASK +#define SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_SHIFT 2 +#define SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_MASK 0x00000004U + /*Margining factor value*/ #undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_DEFVAL #undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT @@ -25020,10 +26514,20 @@ #define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL 0x00000002 #define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT 0 #define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK 0x000000FFU + +/*pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved*/ +#undef SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL +#undef SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT +#undef SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK +#define SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL 0x00000002 +#define SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT 0 +#define SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK 0x000000FFU #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef USB3_0_FPD_POWER_PRSNT_OFFSET #define USB3_0_FPD_POWER_PRSNT_OFFSET 0XFF9D0080 +#undef USB3_0_FPD_PIPE_CLK_OFFSET +#define USB3_0_FPD_PIPE_CLK_OFFSET 0XFF9D007C #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef CRL_APB_RST_LPD_IOU0_OFFSET @@ -25044,8 +26548,6 @@ #define USB3_0_XHCI_GUSB2PHYCFG_OFFSET 0XFE20C200 #undef USB3_0_XHCI_GFLADJ_OFFSET #define USB3_0_XHCI_GFLADJ_OFFSET 0XFE20C630 -#undef PCIE_ATTRIB_ATTR_37_OFFSET -#define PCIE_ATTRIB_ATTR_37_OFFSET 0XFD480094 #undef PCIE_ATTRIB_ATTR_25_OFFSET #define PCIE_ATTRIB_ATTR_25_OFFSET 0XFD480064 #undef PCIE_ATTRIB_ATTR_7_OFFSET @@ -25120,6 +26622,30 @@ #define PCIE_ATTRIB_ATTR_79_OFFSET 0XFD48013C #undef PCIE_ATTRIB_ATTR_43_OFFSET #define PCIE_ATTRIB_ATTR_43_OFFSET 0XFD4800AC +#undef PCIE_ATTRIB_ATTR_48_OFFSET +#define PCIE_ATTRIB_ATTR_48_OFFSET 0XFD4800C0 +#undef PCIE_ATTRIB_ATTR_46_OFFSET +#define PCIE_ATTRIB_ATTR_46_OFFSET 0XFD4800B8 +#undef PCIE_ATTRIB_ATTR_47_OFFSET +#define PCIE_ATTRIB_ATTR_47_OFFSET 0XFD4800BC +#undef PCIE_ATTRIB_ATTR_44_OFFSET +#define PCIE_ATTRIB_ATTR_44_OFFSET 0XFD4800B0 +#undef PCIE_ATTRIB_ATTR_45_OFFSET +#define PCIE_ATTRIB_ATTR_45_OFFSET 0XFD4800B4 +#undef PCIE_ATTRIB_CB_OFFSET +#define PCIE_ATTRIB_CB_OFFSET 0XFD48031C +#undef PCIE_ATTRIB_ATTR_35_OFFSET +#define PCIE_ATTRIB_ATTR_35_OFFSET 0XFD48008C +#undef CRF_APB_RST_FPD_TOP_OFFSET +#define CRF_APB_RST_FPD_TOP_OFFSET 0XFD1A0100 +#undef SATA_AHCI_VENDOR_PP2C_OFFSET +#define SATA_AHCI_VENDOR_PP2C_OFFSET 0XFD0C00AC +#undef SATA_AHCI_VENDOR_PP3C_OFFSET +#define SATA_AHCI_VENDOR_PP3C_OFFSET 0XFD0C00B0 +#undef SATA_AHCI_VENDOR_PP4C_OFFSET +#define SATA_AHCI_VENDOR_PP4C_OFFSET 0XFD0C00B4 +#undef SATA_AHCI_VENDOR_PP5C_OFFSET +#define SATA_AHCI_VENDOR_PP5C_OFFSET 0XFD0C00B8 /*USB 0 reset for control registers*/ #undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL @@ -25137,6 +26663,14 @@ #define USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT 0 #define USB3_0_FPD_POWER_PRSNT_OPTION_MASK 0x00000001U +/*This bit is used to choose between PIPE clock coming from SerDes and the suspend clk*/ +#undef USB3_0_FPD_PIPE_CLK_OPTION_DEFVAL +#undef USB3_0_FPD_PIPE_CLK_OPTION_SHIFT +#undef USB3_0_FPD_PIPE_CLK_OPTION_MASK +#define USB3_0_FPD_PIPE_CLK_OPTION_DEFVAL +#define USB3_0_FPD_PIPE_CLK_OPTION_SHIFT 0 +#define USB3_0_FPD_PIPE_CLK_OPTION_MASK 0x00000001U + /*USB 0 sleep circuit reset*/ #undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL #undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT @@ -25185,14 +26719,6 @@ #define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 19 #define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 0x00080000U -/*PCIE control block level reset*/ -#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL -#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT -#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK -#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 0x000F9FFE -#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 17 -#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 0x00020000U - /*PCIE bridge block level reset (AXI interface)*/ #undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL #undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT @@ -25278,20 +26804,6 @@ #define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT 7 #define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK 0x00000080U -/*Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co - figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app - ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F - r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s - t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati - g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi - when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed.*/ -#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL -#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT -#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK -#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL 0x00000000 -#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT 6 -#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK 0x00000040U - /*Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1 full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U @@ -25357,51 +26869,6 @@ #define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT 8 #define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK 0x003FFF00U -/*Status Read value of PLL Lock*/ -#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L0_PLL_STATUS_READ_1_OFFSET 0XFD4023E4 - -/*Status Read value of PLL Lock*/ -#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L1_PLL_STATUS_READ_1_OFFSET 0XFD4063E4 - -/*Status Read value of PLL Lock*/ -#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L2_PLL_STATUS_READ_1_OFFSET 0XFD40A3E4 - -/*Status Read value of PLL Lock*/ -#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L3_PLL_STATUS_READ_1_OFFSET 0XFD40E3E4 - -/*Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r - gister.; EP=0x0001; RP=0x0001*/ -#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL -#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT -#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK -#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL 0x000009FF -#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT 14 -#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK 0x00004000U - /*If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001*/ #undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_DEFVAL @@ -25827,6 +27294,15 @@ #define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT 9 #define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK 0x00000200U +/*Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r + gister.; EP=0x0001; RP=0x0001*/ +#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL +#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT +#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK +#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL 0x000009FF +#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT 14 +#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK 0x00004000U + /*Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L _REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000*/ #undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_DEFVAL @@ -25957,6 +27433,229 @@ #define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_DEFVAL 0x00000100 #define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT 8 #define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK 0x00000100U + +/*MSI-X Table Size. This value is transferred to the MSI-X Message Control[10:0] field. Set to 0 if MSI-X is not enabled. Note + hat the core does not implement the table; that must be implemented in user logic.; EP=0x0003; RP=0x0000*/ +#undef PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_DEFVAL +#undef PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_SHIFT +#undef PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_MASK +#define PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_DEFVAL +#define PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_SHIFT 0 +#define PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_MASK 0x000007FFU + +/*MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0001; + P=0x0000*/ +#undef PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#define PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT 0 +#define PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_MASK 0x0000FFFFU + +/*MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0000; + P=0x0000*/ +#undef PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#define PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT 0 +#define PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_MASK 0x00001FFFU + +/*MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x0001; RP=0x0000*/ +#undef PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL +#define PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT 0 +#define PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_MASK 0x0000FFFFU + +/*MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x1000; RP=0x0000*/ +#undef PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL 0x00008000 +#define PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT 3 +#define PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_MASK 0x0000FFF8U + +/*DT837748 Enable*/ +#undef PCIE_ATTRIB_CB_CB1_DEFVAL +#undef PCIE_ATTRIB_CB_CB1_SHIFT +#undef PCIE_ATTRIB_CB_CB1_MASK +#define PCIE_ATTRIB_CB_CB1_DEFVAL 0x00000001 +#define PCIE_ATTRIB_CB_CB1_SHIFT 1 +#define PCIE_ATTRIB_CB_CB1_MASK 0x00000002U + +/*Active State PM Support. Indicates the level of active state power management supported by the selected PCI Express Link, enc + ded as follows: 0 Reserved, 1 L0s entry supported, 2 Reserved, 3 L0s and L1 entry supported.; EP=0x0001; RP=0x0001*/ +#undef PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_DEFVAL +#undef PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_SHIFT +#undef PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_MASK +#define PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_DEFVAL 0x00001FFD +#define PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_SHIFT 12 +#define PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_MASK 0x00003000U + +/*PCIE control block level reset*/ +#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL +#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT +#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK +#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 0x000F9FFE +#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 17 +#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 0x00020000U + +/*Status Read value of PLL Lock*/ +#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L0_PLL_STATUS_READ_1_OFFSET 0XFD4023E4 + +/*Status Read value of PLL Lock*/ +#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L1_PLL_STATUS_READ_1_OFFSET 0XFD4063E4 + +/*Status Read value of PLL Lock*/ +#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L2_PLL_STATUS_READ_1_OFFSET 0XFD40A3E4 + +/*Status Read value of PLL Lock*/ +#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L3_PLL_STATUS_READ_1_OFFSET 0XFD40E3E4 + +/*CIBGMN: COMINIT Burst Gap Minimum.*/ +#undef SATA_AHCI_VENDOR_PP2C_CIBGMN_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CIBGMN_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CIBGMN_MASK +#define SATA_AHCI_VENDOR_PP2C_CIBGMN_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CIBGMN_SHIFT 0 +#define SATA_AHCI_VENDOR_PP2C_CIBGMN_MASK 0x000000FFU + +/*CIBGMX: COMINIT Burst Gap Maximum.*/ +#undef SATA_AHCI_VENDOR_PP2C_CIBGMX_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CIBGMX_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CIBGMX_MASK +#define SATA_AHCI_VENDOR_PP2C_CIBGMX_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CIBGMX_SHIFT 8 +#define SATA_AHCI_VENDOR_PP2C_CIBGMX_MASK 0x0000FF00U + +/*CIBGN: COMINIT Burst Gap Nominal.*/ +#undef SATA_AHCI_VENDOR_PP2C_CIBGN_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CIBGN_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CIBGN_MASK +#define SATA_AHCI_VENDOR_PP2C_CIBGN_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CIBGN_SHIFT 16 +#define SATA_AHCI_VENDOR_PP2C_CIBGN_MASK 0x00FF0000U + +/*CINMP: COMINIT Negate Minimum Period.*/ +#undef SATA_AHCI_VENDOR_PP2C_CINMP_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CINMP_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CINMP_MASK +#define SATA_AHCI_VENDOR_PP2C_CINMP_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CINMP_SHIFT 24 +#define SATA_AHCI_VENDOR_PP2C_CINMP_MASK 0xFF000000U + +/*CWBGMN: COMWAKE Burst Gap Minimum.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWBGMN_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWBGMN_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWBGMN_MASK +#define SATA_AHCI_VENDOR_PP3C_CWBGMN_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWBGMN_SHIFT 0 +#define SATA_AHCI_VENDOR_PP3C_CWBGMN_MASK 0x000000FFU + +/*CWBGMX: COMWAKE Burst Gap Maximum.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWBGMX_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWBGMX_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWBGMX_MASK +#define SATA_AHCI_VENDOR_PP3C_CWBGMX_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWBGMX_SHIFT 8 +#define SATA_AHCI_VENDOR_PP3C_CWBGMX_MASK 0x0000FF00U + +/*CWBGN: COMWAKE Burst Gap Nominal.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWBGN_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWBGN_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWBGN_MASK +#define SATA_AHCI_VENDOR_PP3C_CWBGN_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWBGN_SHIFT 16 +#define SATA_AHCI_VENDOR_PP3C_CWBGN_MASK 0x00FF0000U + +/*CWNMP: COMWAKE Negate Minimum Period.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWNMP_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWNMP_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWNMP_MASK +#define SATA_AHCI_VENDOR_PP3C_CWNMP_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWNMP_SHIFT 24 +#define SATA_AHCI_VENDOR_PP3C_CWNMP_MASK 0xFF000000U + +/*BMX: COM Burst Maximum.*/ +#undef SATA_AHCI_VENDOR_PP4C_BMX_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_BMX_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_BMX_MASK +#define SATA_AHCI_VENDOR_PP4C_BMX_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_BMX_SHIFT 0 +#define SATA_AHCI_VENDOR_PP4C_BMX_MASK 0x000000FFU + +/*BNM: COM Burst Nominal.*/ +#undef SATA_AHCI_VENDOR_PP4C_BNM_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_BNM_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_BNM_MASK +#define SATA_AHCI_VENDOR_PP4C_BNM_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_BNM_SHIFT 8 +#define SATA_AHCI_VENDOR_PP4C_BNM_MASK 0x0000FF00U + +/*SFD: Signal Failure Detection, if the signal detection de-asserts for a time greater than this then the OOB detector will det + rmine this is a line idle and cause the PhyInit state machine to exit the Phy Ready State. A value of zero disables the Signa + Failure Detector. The value is based on the OOB Detector Clock typically (PMCLK Clock Period) * SFD giving a nominal time of + 500ns based on a 150MHz PMCLK.*/ +#undef SATA_AHCI_VENDOR_PP4C_SFD_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_SFD_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_SFD_MASK +#define SATA_AHCI_VENDOR_PP4C_SFD_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_SFD_SHIFT 16 +#define SATA_AHCI_VENDOR_PP4C_SFD_MASK 0x00FF0000U + +/*PTST: Partial to Slumber timer value, specific delay the controller should apply while in partial before entering slumber. Th + value is bases on the system clock divided by 128, total delay = (Sys Clock Period) * PTST * 128*/ +#undef SATA_AHCI_VENDOR_PP4C_PTST_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_PTST_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_PTST_MASK +#define SATA_AHCI_VENDOR_PP4C_PTST_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_PTST_SHIFT 24 +#define SATA_AHCI_VENDOR_PP4C_PTST_MASK 0xFF000000U + +/*RIT: Retry Interval Timer. The calculated value divided by two, the lower digit of precision is not needed.*/ +#undef SATA_AHCI_VENDOR_PP5C_RIT_DEFVAL +#undef SATA_AHCI_VENDOR_PP5C_RIT_SHIFT +#undef SATA_AHCI_VENDOR_PP5C_RIT_MASK +#define SATA_AHCI_VENDOR_PP5C_RIT_DEFVAL 0x3FFC96A4 +#define SATA_AHCI_VENDOR_PP5C_RIT_SHIFT 0 +#define SATA_AHCI_VENDOR_PP5C_RIT_MASK 0x000FFFFFU + +/*RCT: Rate Change Timer, a value based on the 54.2us for which a SATA device will transmit at a fixed rate ALIGNp after OOB ha + completed, for a fast SERDES it is suggested that this value be 54.2us / 4*/ +#undef SATA_AHCI_VENDOR_PP5C_RCT_DEFVAL +#undef SATA_AHCI_VENDOR_PP5C_RCT_SHIFT +#undef SATA_AHCI_VENDOR_PP5C_RCT_MASK +#define SATA_AHCI_VENDOR_PP5C_RCT_DEFVAL 0x3FFC96A4 +#define SATA_AHCI_VENDOR_PP5C_RCT_SHIFT 20 +#define SATA_AHCI_VENDOR_PP5C_RCT_MASK 0xFFF00000U #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef CRL_APB_RST_LPD_IOU0_OFFSET @@ -26155,6 +27854,13 @@ extern "C" { int psu_init (); unsigned long psu_ps_pl_isolation_removal_data(); unsigned long psu_ps_pl_reset_config_data(); + int psu_protection(); + int psu_fpd_protection(); + int psu_ocm_protection(); + int psu_ddr_protection(); + int psu_lpd_protection(); + int psu_protection_lock(); + unsigned long psu_apply_master_tz(); #ifdef __cplusplus } #endif diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.tcl b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.tcl index ce5a46e85..b6d9c0418 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.tcl +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init.tcl @@ -521,69 +521,6 @@ set psu_pll_init_data { set psu_clock_init_data { # : CLOCK CONTROL SLCR REGISTER - # Register : GEM0_REF_CTRL @ 0XFF5E0050

- - # Clock active for the RX channel - # PSU_CRL_APB_GEM0_REF_CTRL_RX_CLKACT 0x1 - - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_GEM0_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR0 0x8 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_GEM0_REF_CTRL_SRCSEL 0x0 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E0050, 0x063F3F07U ,0x06010800U) */ - mask_write 0XFF5E0050 0x063F3F07 0x06010800 - # Register : GEM1_REF_CTRL @ 0XFF5E0054

- - # Clock active for the RX channel - # PSU_CRL_APB_GEM1_REF_CTRL_RX_CLKACT 0x1 - - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_GEM1_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR0 0x8 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_GEM1_REF_CTRL_SRCSEL 0x0 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E0054, 0x063F3F07U ,0x06010800U) */ - mask_write 0XFF5E0054 0x063F3F07 0x06010800 - # Register : GEM2_REF_CTRL @ 0XFF5E0058

- - # Clock active for the RX channel - # PSU_CRL_APB_GEM2_REF_CTRL_RX_CLKACT 0x1 - - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_GEM2_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR0 0x8 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_GEM2_REF_CTRL_SRCSEL 0x0 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E0058, 0x063F3F07U ,0x06010800U) */ - mask_write 0XFF5E0058 0x063F3F07 0x06010800 # Register : GEM3_REF_CTRL @ 0XFF5E005C

# Clock active for the RX channel @@ -605,24 +542,6 @@ set psu_clock_init_data { # This register controls this reference clock #(OFFSET, MASK, VALUE) (0XFF5E005C, 0x063F3F07U ,0x06010C00U) */ mask_write 0XFF5E005C 0x063F3F07 0x06010C00 - # Register : GEM_TSU_REF_CTRL @ 0XFF5E0100

- - # 6 bit divider - # PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0 0x6 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_GEM_TSU_REF_CTRL_SRCSEL 0x2 - - # 6 bit divider - # PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1 0x1 - - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_GEM_TSU_REF_CTRL_CLKACT 0x1 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E0100, 0x013F3F07U ,0x01010602U) */ - mask_write 0XFF5E0100 0x013F3F07 0x01010602 # Register : USB0_BUS_REF_CTRL @ 0XFF5E0060

# Clock active signal. Switch to 0 to disable the clock @@ -641,24 +560,6 @@ set psu_clock_init_data { # This register controls this reference clock #(OFFSET, MASK, VALUE) (0XFF5E0060, 0x023F3F07U ,0x02010600U) */ mask_write 0XFF5E0060 0x023F3F07 0x02010600 - # Register : USB1_BUS_REF_CTRL @ 0XFF5E0064

- - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_USB1_BUS_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0 0x4 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_USB1_BUS_REF_CTRL_SRCSEL 0x0 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E0064, 0x023F3F07U ,0x02010400U) */ - mask_write 0XFF5E0064 0x023F3F07 0x02010400 # Register : USB3_DUAL_REF_CTRL @ 0XFF5E004C

# Clock active signal. Switch to 0 to disable the clock @@ -695,24 +596,6 @@ set psu_clock_init_data { # This register controls this reference clock #(OFFSET, MASK, VALUE) (0XFF5E0068, 0x013F3F07U ,0x01010C00U) */ mask_write 0XFF5E0068 0x013F3F07 0x01010C00 - # Register : SDIO0_REF_CTRL @ 0XFF5E006C

- - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_SDIO0_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR0 0x7 - - # 000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_SDIO0_REF_CTRL_SRCSEL 0x2 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E006C, 0x013F3F07U ,0x01010702U) */ - mask_write 0XFF5E006C 0x013F3F07 0x01010702 # Register : SDIO1_REF_CTRL @ 0XFF5E0070

# Clock active signal. Switch to 0 to disable the clock @@ -811,60 +694,6 @@ set psu_clock_init_data { # This register controls this reference clock #(OFFSET, MASK, VALUE) (0XFF5E0124, 0x013F3F07U ,0x01010F00U) */ mask_write 0XFF5E0124 0x013F3F07 0x01010F00 - # Register : SPI0_REF_CTRL @ 0XFF5E007C

- - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_SPI0_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR0 0x7 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_SPI0_REF_CTRL_SRCSEL 0x2 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E007C, 0x013F3F07U ,0x01010702U) */ - mask_write 0XFF5E007C 0x013F3F07 0x01010702 - # Register : SPI1_REF_CTRL @ 0XFF5E0080

- - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_SPI1_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR0 0x7 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_SPI1_REF_CTRL_SRCSEL 0x2 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E0080, 0x013F3F07U ,0x01010702U) */ - mask_write 0XFF5E0080 0x013F3F07 0x01010702 - # Register : CAN0_REF_CTRL @ 0XFF5E0084

- - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_CAN0_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR0 0xa - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_CAN0_REF_CTRL_SRCSEL 0x0 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E0084, 0x013F3F07U ,0x01010A00U) */ - mask_write 0XFF5E0084 0x013F3F07 0x01010A00 # Register : CAN1_REF_CTRL @ 0XFF5E0088

# Clock active signal. Switch to 0 to disable the clock @@ -914,21 +743,6 @@ set psu_clock_init_data { # This register controls this reference clock #(OFFSET, MASK, VALUE) (0XFF5E009C, 0x01003F07U ,0x01000602U) */ mask_write 0XFF5E009C 0x01003F07 0x01000602 - # Register : CSU_PLL_CTRL @ 0XFF5E00A0

- - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_CSU_PLL_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_CSU_PLL_CTRL_DIVISOR0 0x3 - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_CSU_PLL_CTRL_SRCSEL 0x2 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E00A0, 0x01003F07U ,0x01000302U) */ - mask_write 0XFF5E00A0 0x01003F07 0x01000302 # Register : PCAP_CTRL @ 0XFF5E00A4

# Clock active signal. Switch to 0 to disable the clock @@ -989,24 +803,6 @@ set psu_clock_init_data { # This register controls this reference clock #(OFFSET, MASK, VALUE) (0XFF5E00B0, 0x01003F07U ,0x01000602U) */ mask_write 0XFF5E00B0 0x01003F07 0x01000602 - # Register : NAND_REF_CTRL @ 0XFF5E00B4

- - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRL_APB_NAND_REF_CTRL_CLKACT 0x1 - - # 6 bit divider - # PSU_CRL_APB_NAND_REF_CTRL_DIVISOR1 0x1 - - # 6 bit divider - # PSU_CRL_APB_NAND_REF_CTRL_DIVISOR0 0xa - - # 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - # clock. This is not usually an issue, but designers must be aware.) - # PSU_CRL_APB_NAND_REF_CTRL_SRCSEL 0x0 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFF5E00B4, 0x013F3F07U ,0x01010A00U) */ - mask_write 0XFF5E00B4 0x013F3F07 0x01010A00 # Register : ADMA_REF_CTRL @ 0XFF5E00B8

# Clock active signal. Switch to 0 to disable the clock @@ -1362,21 +1158,6 @@ set psu_clock_init_data { # This register controls this reference clock #(OFFSET, MASK, VALUE) (0XFD1A00C4, 0x01003F07U ,0x01000502U) */ mask_write 0XFD1A00C4 0x01003F07 0x01000502 - # Register : GTGREF0_REF_CTRL @ 0XFD1A00C8

- - # 6 bit divider - # PSU_CRF_APB_GTGREF0_REF_CTRL_DIVISOR0 0x4 - - # 000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of - # he new clock. This is not usually an issue, but designers must be aware.) - # PSU_CRF_APB_GTGREF0_REF_CTRL_SRCSEL 0x0 - - # Clock active signal. Switch to 0 to disable the clock - # PSU_CRF_APB_GTGREF0_REF_CTRL_CLKACT 0x1 - - # This register controls this reference clock - #(OFFSET, MASK, VALUE) (0XFD1A00C8, 0x01003F07U ,0x01000400U) */ - mask_write 0XFD1A00C8 0x01003F07 0x01000400 # Register : DBG_TSTMP_CTRL @ 0XFD1A00F8

# 6 bit divider @@ -2246,17 +2027,17 @@ set psu_ddr_init_data { # ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t # is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L # DDR2/LPDDR3/LPDDR4 devices. - # PSU_DDRC_DRAMTMG7_T_CKPDE 0x1 + # PSU_DDRC_DRAMTMG7_T_CKPDE 0x6 # This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable # time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO= # , program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti # g mDDR or LPDDR2/LPDDR3/LPDDR4 devices. - # PSU_DDRC_DRAMTMG7_T_CKPDX 0x1 + # PSU_DDRC_DRAMTMG7_T_CKPDX 0x6 # SDRAM Timing Register 7 - #(OFFSET, MASK, VALUE) (0XFD07011C, 0x00000F0FU ,0x00000101U) */ - mask_write 0XFD07011C 0x00000F0F 0x00000101 + #(OFFSET, MASK, VALUE) (0XFD07011C, 0x00000F0FU ,0x00000606U) */ + mask_write 0XFD07011C 0x00000F0F 0x00000606 # Register : DRAMTMG8 @ 0XFD070120

# tXS_FAST: Exit Self Refresh to ZQCL, ZQCS and MRS (only CL, WR, RTP and Geardown mode). For configurations with MEMC_FREQ_RAT @@ -2503,14 +2284,14 @@ set psu_ddr_init_data { # s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20 # 8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107 # cycles - 0xE - 262144 cycles - 0xF - Unlimited - # PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD 0x4 + # PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD 0x0 # Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled # PSU_DDRC_DFILPCFG0_DFI_LP_EN_PD 0x1 # DFI Low Power Configuration Register 0 - #(OFFSET, MASK, VALUE) (0XFD070198, 0x0FF1F1F1U ,0x07000141U) */ - mask_write 0XFD070198 0x0FF1F1F1 0x07000141 + #(OFFSET, MASK, VALUE) (0XFD070198, 0x0FF1F1F1U ,0x07000101U) */ + mask_write 0XFD070198 0x0FF1F1F1 0x07000101 # Register : DFILPCFG1 @ 0XFD07019C

# Value to drive on dfi_lp_wakeup signal when Maximum Power Saving Mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 @@ -3906,11 +3687,52 @@ set psu_ddr_init_data { # PSU_DDR_PHY_PGCR2_PLLFSMBYP 0x0 # Refresh Period - # PSU_DDR_PHY_PGCR2_TREFPRD 0x12302 + # PSU_DDR_PHY_PGCR2_TREFPRD 0x10028 # PHY General Configuration Register 2 - #(OFFSET, MASK, VALUE) (0XFD080018, 0xFFFFFFFFU ,0x00F12302U) */ - mask_write 0XFD080018 0xFFFFFFFF 0x00F12302 + #(OFFSET, MASK, VALUE) (0XFD080018, 0xFFFFFFFFU ,0x00F10028U) */ + mask_write 0XFD080018 0xFFFFFFFF 0x00F10028 + # Register : PGCR3 @ 0XFD08001C

+ + # CKN Enable + # PSU_DDR_PHY_PGCR3_CKNEN 0x55 + + # CK Enable + # PSU_DDR_PHY_PGCR3_CKEN 0xaa + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_PGCR3_RESERVED_15 0x0 + + # Enable Clock Gating for AC [0] ctl_rd_clk + # PSU_DDR_PHY_PGCR3_GATEACRDCLK 0x2 + + # Enable Clock Gating for AC [0] ddr_clk + # PSU_DDR_PHY_PGCR3_GATEACDDRCLK 0x2 + + # Enable Clock Gating for AC [0] ctl_clk + # PSU_DDR_PHY_PGCR3_GATEACCTLCLK 0x2 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_PGCR3_RESERVED_8 0x0 + + # Controls DDL Bypass Modes + # PSU_DDR_PHY_PGCR3_DDLBYPMODE 0x2 + + # IO Loop-Back Select + # PSU_DDR_PHY_PGCR3_IOLB 0x0 + + # AC Receive FIFO Read Mode + # PSU_DDR_PHY_PGCR3_RDMODE 0x0 + + # Read FIFO Reset Disable + # PSU_DDR_PHY_PGCR3_DISRST 0x0 + + # Clock Level when Clock Gating + # PSU_DDR_PHY_PGCR3_CLKLEVEL 0x0 + + # PHY General Configuration Register 3 + #(OFFSET, MASK, VALUE) (0XFD08001C, 0xFFFFFFFFU ,0x55AA5480U) */ + mask_write 0XFD08001C 0xFFFFFFFF 0x55AA5480 # Register : PGCR5 @ 0XFD080024

# Frequency B Ratio Term @@ -4093,17 +3915,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DTPR0_RESERVED_15 0x0 # Precharge command period - # PSU_DDR_PHY_DTPR0_TRP 0x12 + # PSU_DDR_PHY_DTPR0_TRP 0xf # Reserved. Return zeroes on reads. # PSU_DDR_PHY_DTPR0_RESERVED_7_5 0x0 # Internal read to precharge command delay - # PSU_DDR_PHY_DTPR0_TRTP 0x8 + # PSU_DDR_PHY_DTPR0_TRTP 0x9 # DRAM Timing Parameters Register 0 - #(OFFSET, MASK, VALUE) (0XFD080110, 0xFFFFFFFFU ,0x06241208U) */ - mask_write 0XFD080110 0xFFFFFFFF 0x06241208 + #(OFFSET, MASK, VALUE) (0XFD080110, 0xFFFFFFFFU ,0x06240F09U) */ + mask_write 0XFD080110 0xFFFFFFFF 0x06240F09 # Register : DTPR1 @ 0XFD080114

# Reserved. Return zeroes on reads. @@ -4183,11 +4005,11 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DTPR3_RESERVED_7_3 0x0 # DQS output access time from CK/CK# (LPDDR2/3 only) - # PSU_DDR_PHY_DTPR3_TDQSCK 0x4 + # PSU_DDR_PHY_DTPR3_TDQSCK 0x0 # DRAM Timing Parameters Register 3 - #(OFFSET, MASK, VALUE) (0XFD08011C, 0xFFFFFFFFU ,0x83000804U) */ - mask_write 0XFD08011C 0xFFFFFFFF 0x83000804 + #(OFFSET, MASK, VALUE) (0XFD08011C, 0xFFFFFFFFU ,0x83000800U) */ + mask_write 0XFD08011C 0xFFFFFFFF 0x83000800 # Register : DTPR4 @ 0XFD080120

# Reserved. Return zeroes on reads. @@ -4360,6 +4182,37 @@ set psu_ddr_init_data { # RDIMM General Configuration Register 1 #(OFFSET, MASK, VALUE) (0XFD080144, 0xFFFFFFFFU ,0x00000C80U) */ mask_write 0XFD080144 0xFFFFFFFF 0x00000C80 + # Register : RDIMMCR0 @ 0XFD080150

+ + # DDR4/DDR3 Control Word 7 + # PSU_DDR_PHY_RDIMMCR0_RC7 0x0 + + # DDR4 Control Word 6 (Comman space Control Word) / DDR3 Reserved + # PSU_DDR_PHY_RDIMMCR0_RC6 0x0 + + # DDR4/DDR3 Control Word 5 (CK Driver Characteristics Control Word) + # PSU_DDR_PHY_RDIMMCR0_RC5 0x0 + + # DDR4 Control Word 4 (ODT and CKE Signals Driver Characteristics Control Word) / DDR3 Control Word 4 (Control Signals Driver C + # aracteristics Control Word) + # PSU_DDR_PHY_RDIMMCR0_RC4 0x0 + + # DDR4 Control Word 3 (CA and CS Signals Driver Characteristics Control Word) / DDR3 Control Word 3 (Command/Address Signals Dr + # ver Characteristrics Control Word) + # PSU_DDR_PHY_RDIMMCR0_RC3 0x0 + + # DDR4 Control Word 2 (Timing and IBT Control Word) / DDR3 Control Word 2 (Timing Control Word) + # PSU_DDR_PHY_RDIMMCR0_RC2 0x0 + + # DDR4/DDR3 Control Word 1 (Clock Driver Enable Control Word) + # PSU_DDR_PHY_RDIMMCR0_RC1 0x0 + + # DDR4/DDR3 Control Word 0 (Global Features Control Word) + # PSU_DDR_PHY_RDIMMCR0_RC0 0x0 + + # RDIMM Control Register 0 + #(OFFSET, MASK, VALUE) (0XFD080150, 0xFFFFFFFFU ,0x00000000U) */ + mask_write 0XFD080150 0xFFFFFFFF 0x00000000 # Register : RDIMMCR1 @ 0XFD080154

# Control Word 15 @@ -4703,7 +4556,7 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DTCR0_RESERVED_27_26 0x0 # Data Training Debug Rank Select - # PSU_DDR_PHY_DTCR0_DTDRS 0x1 + # PSU_DDR_PHY_DTCR0_DTDRS 0x0 # Data Training with Early/Extended Gate # PSU_DDR_PHY_DTCR0_DTEXG 0x0 @@ -4721,7 +4574,7 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DTCR0_DTDBS 0x0 # Data Training read DBI deskewing configuration - # PSU_DDR_PHY_DTCR0_DTRDBITR 0x0 + # PSU_DDR_PHY_DTCR0_DTRDBITR 0x2 # Reserved. Return zeroes on reads. # PSU_DDR_PHY_DTCR0_RESERVED_13 0x0 @@ -4745,8 +4598,8 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DTCR0_DTRPTN 0x7 # Data Training Configuration Register 0 - #(OFFSET, MASK, VALUE) (0XFD080200, 0xFFFFFFFFU ,0x810011C7U) */ - mask_write 0XFD080200 0xFFFFFFFF 0x810011C7 + #(OFFSET, MASK, VALUE) (0XFD080200, 0xFFFFFFFFU ,0x800091C7U) */ + mask_write 0XFD080200 0xFFFFFFFF 0x800091C7 # Register : DTCR1 @ 0XFD080204

# Rank Enable. @@ -4812,6 +4665,14 @@ set psu_ddr_init_data { # CA Training Register 0 #(OFFSET, MASK, VALUE) (0XFD080240, 0xFFFFFFFFU ,0x00141054U) */ mask_write 0XFD080240 0xFFFFFFFF 0x00141054 + # Register : BISTLSR @ 0XFD080414

+ + # LFSR seed for pseudo-random BIST patterns + # PSU_DDR_PHY_BISTLSR_SEED 0x12341000 + + # BIST LFSR Seed Register + #(OFFSET, MASK, VALUE) (0XFD080414, 0xFFFFFFFFU ,0x12341000U) */ + mask_write 0XFD080414 0xFFFFFFFF 0x12341000 # Register : RIOCR5 @ 0XFD0804F4

# Reserved. Return zeroes on reads. @@ -5045,13 +4906,13 @@ set psu_ddr_init_data { # PSU_DDR_PHY_VTCR1_SHREN 0x1 # Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training - # PSU_DDR_PHY_VTCR1_TVREFIO 0x4 + # PSU_DDR_PHY_VTCR1_TVREFIO 0x7 # Eye LCDL Offset value for VREF training - # PSU_DDR_PHY_VTCR1_EOFF 0x1 + # PSU_DDR_PHY_VTCR1_EOFF 0x0 # Number of LCDL Eye points for which VREF training is repeated - # PSU_DDR_PHY_VTCR1_ENUM 0x1 + # PSU_DDR_PHY_VTCR1_ENUM 0x0 # HOST (IO) internal VREF training Enable # PSU_DDR_PHY_VTCR1_HVEN 0x1 @@ -5060,8 +4921,66 @@ set psu_ddr_init_data { # PSU_DDR_PHY_VTCR1_HVIO 0x1 # VREF Training Control Register 1 - #(OFFSET, MASK, VALUE) (0XFD08052C, 0xFFFFFFFFU ,0x07F0018FU) */ - mask_write 0XFD08052C 0xFFFFFFFF 0x07F0018F + #(OFFSET, MASK, VALUE) (0XFD08052C, 0xFFFFFFFFU ,0x07F001E3U) */ + mask_write 0XFD08052C 0xFFFFFFFF 0x07F001E3 + # Register : ACBDLR1 @ 0XFD080544

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR1_RESERVED_31_30 0x0 + + # Delay select for the BDL on Parity. + # PSU_DDR_PHY_ACBDLR1_PARBD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR1_RESERVED_23_22 0x0 + + # Delay select for the BDL on Address A[16]. In DDR3 mode this pin is connected to WE. + # PSU_DDR_PHY_ACBDLR1_A16BD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR1_RESERVED_15_14 0x0 + + # Delay select for the BDL on Address A[17]. When not in DDR4 modemode this pin is connected to CAS. + # PSU_DDR_PHY_ACBDLR1_A17BD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR1_RESERVED_7_6 0x0 + + # Delay select for the BDL on ACTN. + # PSU_DDR_PHY_ACBDLR1_ACTBD 0x0 + + # AC Bit Delay Line Register 1 + #(OFFSET, MASK, VALUE) (0XFD080544, 0xFFFFFFFFU ,0x00000000U) */ + mask_write 0XFD080544 0xFFFFFFFF 0x00000000 + # Register : ACBDLR2 @ 0XFD080548

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR2_RESERVED_31_30 0x0 + + # Delay select for the BDL on BG[1]. + # PSU_DDR_PHY_ACBDLR2_BG1BD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR2_RESERVED_23_22 0x0 + + # Delay select for the BDL on BG[0]. + # PSU_DDR_PHY_ACBDLR2_BG0BD 0x0 + + # Reser.ved Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR2_RESERVED_15_14 0x0 + + # Delay select for the BDL on BA[1]. + # PSU_DDR_PHY_ACBDLR2_BA1BD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR2_RESERVED_7_6 0x0 + + # Delay select for the BDL on BA[0]. + # PSU_DDR_PHY_ACBDLR2_BA0BD 0x0 + + # AC Bit Delay Line Register 2 + #(OFFSET, MASK, VALUE) (0XFD080548, 0xFFFFFFFFU ,0x00000000U) */ + mask_write 0XFD080548 0xFFFFFFFF 0x00000000 # Register : ACBDLR6 @ 0XFD080558

# Reserved. Return zeroes on reads. @@ -5149,6 +5068,35 @@ set psu_ddr_init_data { # AC Bit Delay Line Register 8 #(OFFSET, MASK, VALUE) (0XFD080560, 0xFFFFFFFFU ,0x00000000U) */ mask_write 0XFD080560 0xFFFFFFFF 0x00000000 + # Register : ACBDLR9 @ 0XFD080564

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR9_RESERVED_31_30 0x0 + + # Delay select for the BDL on Address A[15]. + # PSU_DDR_PHY_ACBDLR9_A15BD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR9_RESERVED_23_22 0x0 + + # Delay select for the BDL on Address A[14]. + # PSU_DDR_PHY_ACBDLR9_A14BD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR9_RESERVED_15_14 0x0 + + # Delay select for the BDL on Address A[13]. + # PSU_DDR_PHY_ACBDLR9_A13BD 0x0 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_ACBDLR9_RESERVED_7_6 0x0 + + # Delay select for the BDL on Address A[12]. + # PSU_DDR_PHY_ACBDLR9_A12BD 0x0 + + # AC Bit Delay Line Register 9 + #(OFFSET, MASK, VALUE) (0XFD080564, 0xFFFFFFFFU ,0x00000000U) */ + mask_write 0XFD080564 0xFFFFFFFF 0x00000000 # Register : ZQCR @ 0XFD080680

# Reserved. Return zeroes on reads. @@ -5430,17 +5378,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX0GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX0GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX0GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX0GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX0GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX0GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080714, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080714 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080714, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080714 0xFFFFFFFF 0x09094F4F # Register : DX0GCR6 @ 0XFD080718

# Reserved. Returns zeros on reads. @@ -5631,17 +5579,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX1GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX1GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX1GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX1GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX1GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX1GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080814, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080814 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080814, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080814 0xFFFFFFFF 0x09094F4F # Register : DX1GCR6 @ 0XFD080818

# Reserved. Returns zeros on reads. @@ -5867,17 +5815,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX2GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX2GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX2GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX2GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX2GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX2GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080914, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080914 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080914, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080914 0xFFFFFFFF 0x09094F4F # Register : DX2GCR6 @ 0XFD080918

# Reserved. Returns zeros on reads. @@ -6103,17 +6051,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX3GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX3GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX3GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX3GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX3GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX3GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080A14, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080A14 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080A14, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080A14 0xFFFFFFFF 0x09094F4F # Register : DX3GCR6 @ 0XFD080A18

# Reserved. Returns zeros on reads. @@ -6339,17 +6287,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX4GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX4GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX4GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX4GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX4GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX4GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080B14, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080B14 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080B14, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080B14 0xFFFFFFFF 0x09094F4F # Register : DX4GCR6 @ 0XFD080B18

# Reserved. Returns zeros on reads. @@ -6575,17 +6523,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX5GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX5GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX5GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX5GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX5GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX5GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080C14, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080C14 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080C14, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080C14 0xFFFFFFFF 0x09094F4F # Register : DX5GCR6 @ 0XFD080C18

# Reserved. Returns zeros on reads. @@ -6811,17 +6759,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX6GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX6GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX6GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX6GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX6GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX6GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080D14, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080D14 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080D14, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080D14 0xFFFFFFFF 0x09094F4F # Register : DX6GCR6 @ 0XFD080D18

# Reserved. Returns zeros on reads. @@ -7047,17 +6995,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX7GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX7GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX7GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX7GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX7GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX7GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080E14, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080E14 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080E14, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080E14 0xFFFFFFFF 0x09094F4F # Register : DX7GCR6 @ 0XFD080E18

# Reserved. Returns zeros on reads. @@ -7283,17 +7231,17 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8GCR5_RESERVED_15 0x0 # Byte Lane internal VREF Select for Rank 1 - # PSU_DDR_PHY_DX8GCR5_DXREFISELR1 0x55 + # PSU_DDR_PHY_DX8GCR5_DXREFISELR1 0x4f # Reserved. Returns zeros on reads. # PSU_DDR_PHY_DX8GCR5_RESERVED_7 0x0 # Byte Lane internal VREF Select for Rank 0 - # PSU_DDR_PHY_DX8GCR5_DXREFISELR0 0x55 + # PSU_DDR_PHY_DX8GCR5_DXREFISELR0 0x4f # DATX8 n General Configuration Register 5 - #(OFFSET, MASK, VALUE) (0XFD080F14, 0xFFFFFFFFU ,0x09095555U) */ - mask_write 0XFD080F14 0xFFFFFFFF 0x09095555 + #(OFFSET, MASK, VALUE) (0XFD080F14, 0xFFFFFFFFU ,0x09094F4FU) */ + mask_write 0XFD080F14 0xFFFFFFFF 0x09094F4F # Register : DX8GCR6 @ 0XFD080F18

# Reserved. Returns zeros on reads. @@ -7369,6 +7317,68 @@ set psu_ddr_init_data { # DATX8 n General Timing Register 0 #(OFFSET, MASK, VALUE) (0XFD080FC0, 0xFFFFFFFFU ,0x00020000U) */ mask_write 0XFD080FC0 0xFFFFFFFF 0x00020000 + # Register : DX8SL0OSC @ 0XFD081400

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_DX8SL0OSC_RESERVED_31_30 0x0 + + # Enable Clock Gating for DX ddr_clk + # PSU_DDR_PHY_DX8SL0OSC_GATEDXRDCLK 0x2 + + # Enable Clock Gating for DX ctl_rd_clk + # PSU_DDR_PHY_DX8SL0OSC_GATEDXDDRCLK 0x2 + + # Enable Clock Gating for DX ctl_clk + # PSU_DDR_PHY_DX8SL0OSC_GATEDXCTLCLK 0x2 + + # Selects the level to which clocks will be stalled when clock gating is enabled. + # PSU_DDR_PHY_DX8SL0OSC_CLKLEVEL 0x0 + + # Loopback Mode + # PSU_DDR_PHY_DX8SL0OSC_LBMODE 0x0 + + # Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + # PSU_DDR_PHY_DX8SL0OSC_LBGSDQS 0x0 + + # Loopback DQS Gating + # PSU_DDR_PHY_DX8SL0OSC_LBGDQS 0x0 + + # Loopback DQS Shift + # PSU_DDR_PHY_DX8SL0OSC_LBDQSS 0x0 + + # PHY High-Speed Reset + # PSU_DDR_PHY_DX8SL0OSC_PHYHRST 0x1 + + # PHY FIFO Reset + # PSU_DDR_PHY_DX8SL0OSC_PHYFRST 0x1 + + # Delay Line Test Start + # PSU_DDR_PHY_DX8SL0OSC_DLTST 0x0 + + # Delay Line Test Mode + # PSU_DDR_PHY_DX8SL0OSC_DLTMODE 0x0 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL0OSC_RESERVED_12_11 0x3 + + # Oscillator Mode Write-Data Delay Line Select + # PSU_DDR_PHY_DX8SL0OSC_OSCWDDL 0x3 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL0OSC_RESERVED_8_7 0x3 + + # Oscillator Mode Write-Leveling Delay Line Select + # PSU_DDR_PHY_DX8SL0OSC_OSCWDL 0x3 + + # Oscillator Mode Division + # PSU_DDR_PHY_DX8SL0OSC_OSCDIV 0xf + + # Oscillator Enable + # PSU_DDR_PHY_DX8SL0OSC_OSCEN 0x0 + + # DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + #(OFFSET, MASK, VALUE) (0XFD081400, 0xFFFFFFFFU ,0x2A019FFEU) */ + mask_write 0XFD081400 0xFFFFFFFF 0x2A019FFE # Register : DX8SL0DQSCTL @ 0XFD08141C

# Reserved. Return zeroes on reads. @@ -7408,14 +7418,14 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL0DQSCTL_DXSR 0x3 # DQS_N Resistor - # PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES 0xc + # PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES 0x0 # DQS Resistor - # PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES 0x4 + # PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES 0x0 # DATX8 0-1 DQS Control Register - #(OFFSET, MASK, VALUE) (0XFD08141C, 0xFFFFFFFFU ,0x012643C4U) */ - mask_write 0XFD08141C 0xFFFFFFFF 0x012643C4 + #(OFFSET, MASK, VALUE) (0XFD08141C, 0xFFFFFFFFU ,0x01264300U) */ + mask_write 0XFD08141C 0xFFFFFFFF 0x01264300 # Register : DX8SL0DXCTL2 @ 0XFD08142C

# Reserved. Return zeroes on reads. @@ -7428,7 +7438,7 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL0DXCTL2_POSOEX 0x0 # OE Extension during Pre-amble - # PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX 0x0 + # PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX 0x1 # Reserved. Return zeroes on reads. # PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_17 0x0 @@ -7467,8 +7477,8 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_0 0x0 # DATX8 0-1 DX Control Register 2 - #(OFFSET, MASK, VALUE) (0XFD08142C, 0xFFFFFFFFU ,0x00001800U) */ - mask_write 0XFD08142C 0xFFFFFFFF 0x00001800 + #(OFFSET, MASK, VALUE) (0XFD08142C, 0xFFFFFFFFU ,0x00041800U) */ + mask_write 0XFD08142C 0xFFFFFFFF 0x00041800 # Register : DX8SL0IOCR @ 0XFD081430

# Reserved. Return zeroes on reads. @@ -7492,6 +7502,68 @@ set psu_ddr_init_data { # DATX8 0-1 I/O Configuration Register #(OFFSET, MASK, VALUE) (0XFD081430, 0xFFFFFFFFU ,0x70800000U) */ mask_write 0XFD081430 0xFFFFFFFF 0x70800000 + # Register : DX8SL1OSC @ 0XFD081440

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_DX8SL1OSC_RESERVED_31_30 0x0 + + # Enable Clock Gating for DX ddr_clk + # PSU_DDR_PHY_DX8SL1OSC_GATEDXRDCLK 0x2 + + # Enable Clock Gating for DX ctl_rd_clk + # PSU_DDR_PHY_DX8SL1OSC_GATEDXDDRCLK 0x2 + + # Enable Clock Gating for DX ctl_clk + # PSU_DDR_PHY_DX8SL1OSC_GATEDXCTLCLK 0x2 + + # Selects the level to which clocks will be stalled when clock gating is enabled. + # PSU_DDR_PHY_DX8SL1OSC_CLKLEVEL 0x0 + + # Loopback Mode + # PSU_DDR_PHY_DX8SL1OSC_LBMODE 0x0 + + # Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + # PSU_DDR_PHY_DX8SL1OSC_LBGSDQS 0x0 + + # Loopback DQS Gating + # PSU_DDR_PHY_DX8SL1OSC_LBGDQS 0x0 + + # Loopback DQS Shift + # PSU_DDR_PHY_DX8SL1OSC_LBDQSS 0x0 + + # PHY High-Speed Reset + # PSU_DDR_PHY_DX8SL1OSC_PHYHRST 0x1 + + # PHY FIFO Reset + # PSU_DDR_PHY_DX8SL1OSC_PHYFRST 0x1 + + # Delay Line Test Start + # PSU_DDR_PHY_DX8SL1OSC_DLTST 0x0 + + # Delay Line Test Mode + # PSU_DDR_PHY_DX8SL1OSC_DLTMODE 0x0 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL1OSC_RESERVED_12_11 0x3 + + # Oscillator Mode Write-Data Delay Line Select + # PSU_DDR_PHY_DX8SL1OSC_OSCWDDL 0x3 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL1OSC_RESERVED_8_7 0x3 + + # Oscillator Mode Write-Leveling Delay Line Select + # PSU_DDR_PHY_DX8SL1OSC_OSCWDL 0x3 + + # Oscillator Mode Division + # PSU_DDR_PHY_DX8SL1OSC_OSCDIV 0xf + + # Oscillator Enable + # PSU_DDR_PHY_DX8SL1OSC_OSCEN 0x0 + + # DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + #(OFFSET, MASK, VALUE) (0XFD081440, 0xFFFFFFFFU ,0x2A019FFEU) */ + mask_write 0XFD081440 0xFFFFFFFF 0x2A019FFE # Register : DX8SL1DQSCTL @ 0XFD08145C

# Reserved. Return zeroes on reads. @@ -7531,14 +7603,14 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL1DQSCTL_DXSR 0x3 # DQS_N Resistor - # PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES 0xc + # PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES 0x0 # DQS Resistor - # PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES 0x4 + # PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES 0x0 # DATX8 0-1 DQS Control Register - #(OFFSET, MASK, VALUE) (0XFD08145C, 0xFFFFFFFFU ,0x012643C4U) */ - mask_write 0XFD08145C 0xFFFFFFFF 0x012643C4 + #(OFFSET, MASK, VALUE) (0XFD08145C, 0xFFFFFFFFU ,0x01264300U) */ + mask_write 0XFD08145C 0xFFFFFFFF 0x01264300 # Register : DX8SL1DXCTL2 @ 0XFD08146C

# Reserved. Return zeroes on reads. @@ -7551,7 +7623,7 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL1DXCTL2_POSOEX 0x0 # OE Extension during Pre-amble - # PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX 0x0 + # PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX 0x1 # Reserved. Return zeroes on reads. # PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_17 0x0 @@ -7590,8 +7662,8 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_0 0x0 # DATX8 0-1 DX Control Register 2 - #(OFFSET, MASK, VALUE) (0XFD08146C, 0xFFFFFFFFU ,0x00001800U) */ - mask_write 0XFD08146C 0xFFFFFFFF 0x00001800 + #(OFFSET, MASK, VALUE) (0XFD08146C, 0xFFFFFFFFU ,0x00041800U) */ + mask_write 0XFD08146C 0xFFFFFFFF 0x00041800 # Register : DX8SL1IOCR @ 0XFD081470

# Reserved. Return zeroes on reads. @@ -7615,16 +7687,78 @@ set psu_ddr_init_data { # DATX8 0-1 I/O Configuration Register #(OFFSET, MASK, VALUE) (0XFD081470, 0xFFFFFFFFU ,0x70800000U) */ mask_write 0XFD081470 0xFFFFFFFF 0x70800000 - # Register : DX8SL2DQSCTL @ 0XFD08149C

+ # Register : DX8SL2OSC @ 0XFD081480

# Reserved. Return zeroes on reads. - # PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25 0x0 + # PSU_DDR_PHY_DX8SL2OSC_RESERVED_31_30 0x0 - # Read Path Rise-to-Rise Mode - # PSU_DDR_PHY_DX8SL2DQSCTL_RRRMODE 0x1 + # Enable Clock Gating for DX ddr_clk + # PSU_DDR_PHY_DX8SL2OSC_GATEDXRDCLK 0x2 - # Reserved. Return zeroes on reads. - # PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22 0x0 + # Enable Clock Gating for DX ctl_rd_clk + # PSU_DDR_PHY_DX8SL2OSC_GATEDXDDRCLK 0x2 + + # Enable Clock Gating for DX ctl_clk + # PSU_DDR_PHY_DX8SL2OSC_GATEDXCTLCLK 0x2 + + # Selects the level to which clocks will be stalled when clock gating is enabled. + # PSU_DDR_PHY_DX8SL2OSC_CLKLEVEL 0x0 + + # Loopback Mode + # PSU_DDR_PHY_DX8SL2OSC_LBMODE 0x0 + + # Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + # PSU_DDR_PHY_DX8SL2OSC_LBGSDQS 0x0 + + # Loopback DQS Gating + # PSU_DDR_PHY_DX8SL2OSC_LBGDQS 0x0 + + # Loopback DQS Shift + # PSU_DDR_PHY_DX8SL2OSC_LBDQSS 0x0 + + # PHY High-Speed Reset + # PSU_DDR_PHY_DX8SL2OSC_PHYHRST 0x1 + + # PHY FIFO Reset + # PSU_DDR_PHY_DX8SL2OSC_PHYFRST 0x1 + + # Delay Line Test Start + # PSU_DDR_PHY_DX8SL2OSC_DLTST 0x0 + + # Delay Line Test Mode + # PSU_DDR_PHY_DX8SL2OSC_DLTMODE 0x0 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL2OSC_RESERVED_12_11 0x3 + + # Oscillator Mode Write-Data Delay Line Select + # PSU_DDR_PHY_DX8SL2OSC_OSCWDDL 0x3 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL2OSC_RESERVED_8_7 0x3 + + # Oscillator Mode Write-Leveling Delay Line Select + # PSU_DDR_PHY_DX8SL2OSC_OSCWDL 0x3 + + # Oscillator Mode Division + # PSU_DDR_PHY_DX8SL2OSC_OSCDIV 0xf + + # Oscillator Enable + # PSU_DDR_PHY_DX8SL2OSC_OSCEN 0x0 + + # DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + #(OFFSET, MASK, VALUE) (0XFD081480, 0xFFFFFFFFU ,0x2A019FFEU) */ + mask_write 0XFD081480 0xFFFFFFFF 0x2A019FFE + # Register : DX8SL2DQSCTL @ 0XFD08149C

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25 0x0 + + # Read Path Rise-to-Rise Mode + # PSU_DDR_PHY_DX8SL2DQSCTL_RRRMODE 0x1 + + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22 0x0 # Write Path Rise-to-Rise Mode # PSU_DDR_PHY_DX8SL2DQSCTL_WRRMODE 0x1 @@ -7654,14 +7788,14 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL2DQSCTL_DXSR 0x3 # DQS_N Resistor - # PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES 0xc + # PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES 0x0 # DQS Resistor - # PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES 0x4 + # PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES 0x0 # DATX8 0-1 DQS Control Register - #(OFFSET, MASK, VALUE) (0XFD08149C, 0xFFFFFFFFU ,0x012643C4U) */ - mask_write 0XFD08149C 0xFFFFFFFF 0x012643C4 + #(OFFSET, MASK, VALUE) (0XFD08149C, 0xFFFFFFFFU ,0x01264300U) */ + mask_write 0XFD08149C 0xFFFFFFFF 0x01264300 # Register : DX8SL2DXCTL2 @ 0XFD0814AC

# Reserved. Return zeroes on reads. @@ -7674,7 +7808,7 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL2DXCTL2_POSOEX 0x0 # OE Extension during Pre-amble - # PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX 0x0 + # PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX 0x1 # Reserved. Return zeroes on reads. # PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_17 0x0 @@ -7713,8 +7847,8 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_0 0x0 # DATX8 0-1 DX Control Register 2 - #(OFFSET, MASK, VALUE) (0XFD0814AC, 0xFFFFFFFFU ,0x00001800U) */ - mask_write 0XFD0814AC 0xFFFFFFFF 0x00001800 + #(OFFSET, MASK, VALUE) (0XFD0814AC, 0xFFFFFFFFU ,0x00041800U) */ + mask_write 0XFD0814AC 0xFFFFFFFF 0x00041800 # Register : DX8SL2IOCR @ 0XFD0814B0

# Reserved. Return zeroes on reads. @@ -7738,6 +7872,68 @@ set psu_ddr_init_data { # DATX8 0-1 I/O Configuration Register #(OFFSET, MASK, VALUE) (0XFD0814B0, 0xFFFFFFFFU ,0x70800000U) */ mask_write 0XFD0814B0 0xFFFFFFFF 0x70800000 + # Register : DX8SL3OSC @ 0XFD0814C0

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_DX8SL3OSC_RESERVED_31_30 0x0 + + # Enable Clock Gating for DX ddr_clk + # PSU_DDR_PHY_DX8SL3OSC_GATEDXRDCLK 0x2 + + # Enable Clock Gating for DX ctl_rd_clk + # PSU_DDR_PHY_DX8SL3OSC_GATEDXDDRCLK 0x2 + + # Enable Clock Gating for DX ctl_clk + # PSU_DDR_PHY_DX8SL3OSC_GATEDXCTLCLK 0x2 + + # Selects the level to which clocks will be stalled when clock gating is enabled. + # PSU_DDR_PHY_DX8SL3OSC_CLKLEVEL 0x0 + + # Loopback Mode + # PSU_DDR_PHY_DX8SL3OSC_LBMODE 0x0 + + # Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + # PSU_DDR_PHY_DX8SL3OSC_LBGSDQS 0x0 + + # Loopback DQS Gating + # PSU_DDR_PHY_DX8SL3OSC_LBGDQS 0x0 + + # Loopback DQS Shift + # PSU_DDR_PHY_DX8SL3OSC_LBDQSS 0x0 + + # PHY High-Speed Reset + # PSU_DDR_PHY_DX8SL3OSC_PHYHRST 0x1 + + # PHY FIFO Reset + # PSU_DDR_PHY_DX8SL3OSC_PHYFRST 0x1 + + # Delay Line Test Start + # PSU_DDR_PHY_DX8SL3OSC_DLTST 0x0 + + # Delay Line Test Mode + # PSU_DDR_PHY_DX8SL3OSC_DLTMODE 0x0 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL3OSC_RESERVED_12_11 0x3 + + # Oscillator Mode Write-Data Delay Line Select + # PSU_DDR_PHY_DX8SL3OSC_OSCWDDL 0x3 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL3OSC_RESERVED_8_7 0x3 + + # Oscillator Mode Write-Leveling Delay Line Select + # PSU_DDR_PHY_DX8SL3OSC_OSCWDL 0x3 + + # Oscillator Mode Division + # PSU_DDR_PHY_DX8SL3OSC_OSCDIV 0xf + + # Oscillator Enable + # PSU_DDR_PHY_DX8SL3OSC_OSCEN 0x0 + + # DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + #(OFFSET, MASK, VALUE) (0XFD0814C0, 0xFFFFFFFFU ,0x2A019FFEU) */ + mask_write 0XFD0814C0 0xFFFFFFFF 0x2A019FFE # Register : DX8SL3DQSCTL @ 0XFD0814DC

# Reserved. Return zeroes on reads. @@ -7777,14 +7973,14 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL3DQSCTL_DXSR 0x3 # DQS_N Resistor - # PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES 0xc + # PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES 0x0 # DQS Resistor - # PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES 0x4 + # PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES 0x0 # DATX8 0-1 DQS Control Register - #(OFFSET, MASK, VALUE) (0XFD0814DC, 0xFFFFFFFFU ,0x012643C4U) */ - mask_write 0XFD0814DC 0xFFFFFFFF 0x012643C4 + #(OFFSET, MASK, VALUE) (0XFD0814DC, 0xFFFFFFFFU ,0x01264300U) */ + mask_write 0XFD0814DC 0xFFFFFFFF 0x01264300 # Register : DX8SL3DXCTL2 @ 0XFD0814EC

# Reserved. Return zeroes on reads. @@ -7797,7 +7993,7 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL3DXCTL2_POSOEX 0x0 # OE Extension during Pre-amble - # PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX 0x0 + # PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX 0x1 # Reserved. Return zeroes on reads. # PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_17 0x0 @@ -7836,8 +8032,8 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_0 0x0 # DATX8 0-1 DX Control Register 2 - #(OFFSET, MASK, VALUE) (0XFD0814EC, 0xFFFFFFFFU ,0x00001800U) */ - mask_write 0XFD0814EC 0xFFFFFFFF 0x00001800 + #(OFFSET, MASK, VALUE) (0XFD0814EC, 0xFFFFFFFFU ,0x00041800U) */ + mask_write 0XFD0814EC 0xFFFFFFFF 0x00041800 # Register : DX8SL3IOCR @ 0XFD0814F0

# Reserved. Return zeroes on reads. @@ -7861,6 +8057,68 @@ set psu_ddr_init_data { # DATX8 0-1 I/O Configuration Register #(OFFSET, MASK, VALUE) (0XFD0814F0, 0xFFFFFFFFU ,0x70800000U) */ mask_write 0XFD0814F0 0xFFFFFFFF 0x70800000 + # Register : DX8SL4OSC @ 0XFD081500

+ + # Reserved. Return zeroes on reads. + # PSU_DDR_PHY_DX8SL4OSC_RESERVED_31_30 0x0 + + # Enable Clock Gating for DX ddr_clk + # PSU_DDR_PHY_DX8SL4OSC_GATEDXRDCLK 0x2 + + # Enable Clock Gating for DX ctl_rd_clk + # PSU_DDR_PHY_DX8SL4OSC_GATEDXDDRCLK 0x2 + + # Enable Clock Gating for DX ctl_clk + # PSU_DDR_PHY_DX8SL4OSC_GATEDXCTLCLK 0x2 + + # Selects the level to which clocks will be stalled when clock gating is enabled. + # PSU_DDR_PHY_DX8SL4OSC_CLKLEVEL 0x0 + + # Loopback Mode + # PSU_DDR_PHY_DX8SL4OSC_LBMODE 0x0 + + # Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + # PSU_DDR_PHY_DX8SL4OSC_LBGSDQS 0x0 + + # Loopback DQS Gating + # PSU_DDR_PHY_DX8SL4OSC_LBGDQS 0x0 + + # Loopback DQS Shift + # PSU_DDR_PHY_DX8SL4OSC_LBDQSS 0x0 + + # PHY High-Speed Reset + # PSU_DDR_PHY_DX8SL4OSC_PHYHRST 0x1 + + # PHY FIFO Reset + # PSU_DDR_PHY_DX8SL4OSC_PHYFRST 0x1 + + # Delay Line Test Start + # PSU_DDR_PHY_DX8SL4OSC_DLTST 0x0 + + # Delay Line Test Mode + # PSU_DDR_PHY_DX8SL4OSC_DLTMODE 0x0 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL4OSC_RESERVED_12_11 0x3 + + # Oscillator Mode Write-Data Delay Line Select + # PSU_DDR_PHY_DX8SL4OSC_OSCWDDL 0x3 + + # Reserved. Caution, do not write to this register field. + # PSU_DDR_PHY_DX8SL4OSC_RESERVED_8_7 0x3 + + # Oscillator Mode Write-Leveling Delay Line Select + # PSU_DDR_PHY_DX8SL4OSC_OSCWDL 0x3 + + # Oscillator Mode Division + # PSU_DDR_PHY_DX8SL4OSC_OSCDIV 0xf + + # Oscillator Enable + # PSU_DDR_PHY_DX8SL4OSC_OSCEN 0x0 + + # DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + #(OFFSET, MASK, VALUE) (0XFD081500, 0xFFFFFFFFU ,0x2A019FFEU) */ + mask_write 0XFD081500 0xFFFFFFFF 0x2A019FFE # Register : DX8SL4DQSCTL @ 0XFD08151C

# Reserved. Return zeroes on reads. @@ -7900,14 +8158,14 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL4DQSCTL_DXSR 0x3 # DQS_N Resistor - # PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES 0xc + # PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES 0x0 # DQS Resistor - # PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES 0x4 + # PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES 0x0 # DATX8 0-1 DQS Control Register - #(OFFSET, MASK, VALUE) (0XFD08151C, 0xFFFFFFFFU ,0x012643C4U) */ - mask_write 0XFD08151C 0xFFFFFFFF 0x012643C4 + #(OFFSET, MASK, VALUE) (0XFD08151C, 0xFFFFFFFFU ,0x01264300U) */ + mask_write 0XFD08151C 0xFFFFFFFF 0x01264300 # Register : DX8SL4DXCTL2 @ 0XFD08152C

# Reserved. Return zeroes on reads. @@ -7920,7 +8178,7 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL4DXCTL2_POSOEX 0x0 # OE Extension during Pre-amble - # PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX 0x0 + # PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX 0x1 # Reserved. Return zeroes on reads. # PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_17 0x0 @@ -7959,8 +8217,8 @@ set psu_ddr_init_data { # PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_0 0x0 # DATX8 0-1 DX Control Register 2 - #(OFFSET, MASK, VALUE) (0XFD08152C, 0xFFFFFFFFU ,0x00001800U) */ - mask_write 0XFD08152C 0xFFFFFFFF 0x00001800 + #(OFFSET, MASK, VALUE) (0XFD08152C, 0xFFFFFFFFU ,0x00041800U) */ + mask_write 0XFD08152C 0xFFFFFFFF 0x00041800 # Register : DX8SL4IOCR @ 0XFD081530

# Reserved. Return zeroes on reads. @@ -8717,7 +8975,7 @@ set psu_mio_init_data { # Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc # n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper) - # PSU_IOU_SLCR_MIO_PIN_26_L2_SEL 1 + # PSU_IOU_SLCR_MIO_PIN_26_L2_SEL 0 # Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can # , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal @@ -8727,8 +8985,8 @@ set psu_mio_init_data { # PSU_IOU_SLCR_MIO_PIN_26_L3_SEL 0 # Configures MIO Pin 26 peripheral interface mapping - #(OFFSET, MASK, VALUE) (0XFF180068, 0x000000FEU ,0x00000008U) */ - mask_write 0XFF180068 0x000000FE 0x00000008 + #(OFFSET, MASK, VALUE) (0XFF180068, 0x000000FEU ,0x00000000U) */ + mask_write 0XFF180068 0x000000FE 0x00000000 # Register : MIO_PIN_27 @ 0XFF18006C

# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[0]- (TX RGMII data) @@ -8740,7 +8998,7 @@ set psu_mio_init_data { # Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc # n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp # t, dp_aux_data_out- (Dp Aux Data) - # PSU_IOU_SLCR_MIO_PIN_27_L2_SEL 0 + # PSU_IOU_SLCR_MIO_PIN_27_L2_SEL 3 # Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can # , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa @@ -8750,8 +9008,8 @@ set psu_mio_init_data { # PSU_IOU_SLCR_MIO_PIN_27_L3_SEL 0 # Configures MIO Pin 27 peripheral interface mapping - #(OFFSET, MASK, VALUE) (0XFF18006C, 0x000000FEU ,0x00000000U) */ - mask_write 0XFF18006C 0x000000FE 0x00000000 + #(OFFSET, MASK, VALUE) (0XFF18006C, 0x000000FEU ,0x00000018U) */ + mask_write 0XFF18006C 0x000000FE 0x00000018 # Register : MIO_PIN_28 @ 0XFF180070

# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[1]- (TX RGMII data) @@ -8762,7 +9020,7 @@ set psu_mio_init_data { # Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc # n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug) - # PSU_IOU_SLCR_MIO_PIN_28_L2_SEL 0 + # PSU_IOU_SLCR_MIO_PIN_28_L2_SEL 3 # Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can # , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa @@ -8771,8 +9029,8 @@ set psu_mio_init_data { # PSU_IOU_SLCR_MIO_PIN_28_L3_SEL 0 # Configures MIO Pin 28 peripheral interface mapping - #(OFFSET, MASK, VALUE) (0XFF180070, 0x000000FEU ,0x00000000U) */ - mask_write 0XFF180070 0x000000FE 0x00000000 + #(OFFSET, MASK, VALUE) (0XFF180070, 0x000000FEU ,0x00000018U) */ + mask_write 0XFF180070 0x000000FE 0x00000018 # Register : MIO_PIN_29 @ 0XFF180074

# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[2]- (TX RGMII data) @@ -8784,7 +9042,7 @@ set psu_mio_init_data { # Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc # n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp # t, dp_aux_data_out- (Dp Aux Data) - # PSU_IOU_SLCR_MIO_PIN_29_L2_SEL 0 + # PSU_IOU_SLCR_MIO_PIN_29_L2_SEL 3 # Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can # , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal @@ -8794,8 +9052,8 @@ set psu_mio_init_data { # PSU_IOU_SLCR_MIO_PIN_29_L3_SEL 0 # Configures MIO Pin 29 peripheral interface mapping - #(OFFSET, MASK, VALUE) (0XFF180074, 0x000000FEU ,0x00000000U) */ - mask_write 0XFF180074 0x000000FE 0x00000000 + #(OFFSET, MASK, VALUE) (0XFF180074, 0x000000FEU ,0x00000018U) */ + mask_write 0XFF180074 0x000000FE 0x00000018 # Register : MIO_PIN_30 @ 0XFF180078

# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[3]- (TX RGMII data) @@ -8806,7 +9064,7 @@ set psu_mio_init_data { # Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc # n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug) - # PSU_IOU_SLCR_MIO_PIN_30_L2_SEL 0 + # PSU_IOU_SLCR_MIO_PIN_30_L2_SEL 3 # Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can # , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal @@ -8816,8 +9074,8 @@ set psu_mio_init_data { # PSU_IOU_SLCR_MIO_PIN_30_L3_SEL 0 # Configures MIO Pin 30 peripheral interface mapping - #(OFFSET, MASK, VALUE) (0XFF180078, 0x000000FEU ,0x00000000U) */ - mask_write 0XFF180078 0x000000FE 0x00000000 + #(OFFSET, MASK, VALUE) (0XFF180078, 0x000000FEU ,0x00000018U) */ + mask_write 0XFF180078 0x000000FE 0x00000018 # Register : MIO_PIN_31 @ 0XFF18007C

# Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_ctl- (TX RGMII control) @@ -9923,26 +10181,26 @@ set psu_mio_init_data { # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI 1 # Master Tri-state Enable for pin 26, active high - # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI 1 + # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI 0 # Master Tri-state Enable for pin 27, active high # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI 0 # Master Tri-state Enable for pin 28, active high - # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI 0 + # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI 1 # Master Tri-state Enable for pin 29, active high # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI 0 # Master Tri-state Enable for pin 30, active high - # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI 0 + # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI 1 # Master Tri-state Enable for pin 31, active high # PSU_IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI 0 # MIO pin Tri-state Enables, 31:0 - #(OFFSET, MASK, VALUE) (0XFF180204, 0xFFFFFFFFU ,0x06240000U) */ - mask_write 0XFF180204 0xFFFFFFFF 0x06240000 + #(OFFSET, MASK, VALUE) (0XFF180204, 0xFFFFFFFFU ,0x52240000U) */ + mask_write 0XFF180204 0xFFFFFFFF 0x52240000 # Register : MIO_MST_TRI1 @ 0XFF180208

# Master Tri-state Enable for pin 32, active high @@ -11611,6 +11869,15 @@ set psu_mio_init_data { set psu_peripherals_init_data { # : RESET BLOCKS + # : TIMESTAMP + # Register : RST_LPD_IOU2 @ 0XFF5E0238

+ + # Block level reset + # PSU_CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET 0 + + # Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset. + #(OFFSET, MASK, VALUE) (0XFF5E0238, 0x00100000U ,0x00000000U) */ + mask_write 0XFF5E0238 0x00100000 0x00000000 # : ENET # Register : RST_LPD_IOU0 @ 0XFF5E0230

@@ -11629,6 +11896,15 @@ set psu_peripherals_init_data { # Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset. #(OFFSET, MASK, VALUE) (0XFF5E0238, 0x00000001U ,0x00000000U) */ mask_write 0XFF5E0238 0x00000001 0x00000000 + # : QSPI TAP DELAY + # Register : IOU_TAPDLY_BYPASS @ 0XFF180390

+ + # 0: Do not by pass the tap delays on the Rx clock signal of LQSPI 1: Bypass the Tap delay on the Rx clock signal of LQSPI + # PSU_IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX 1 + + # IOU tap delay bypass for the LQSPI and NAND controllers + #(OFFSET, MASK, VALUE) (0XFF180390, 0x00000004U ,0x00000004U) */ + mask_write 0XFF180390 0x00000004 0x00000004 # : NAND # : USB # Register : RST_LPD_TOP @ 0XFF5E023C

@@ -11728,6 +12004,17 @@ set psu_peripherals_init_data { # SD Config Register 1 #(OFFSET, MASK, VALUE) (0XFF18031C, 0x7F800000U ,0x63800000U) */ mask_write 0XFF18031C 0x7F800000 0x63800000 + # : SD1 RETUNER + # Register : SD_CONFIG_REG3 @ 0XFF180324

+ + # This is the Timer Count for Re-Tuning Timer for Re-Tuning Mode 1 to 3. Setting to 4'b0 disables Re-Tuning Timer. 0h - Get inf + # rmation via other source 1h = 1 seconds 2h = 2 seconds 3h = 4 seconds 4h = 8 seconds -- n = 2(n-1) seconds -- Bh = 1024 secon + # s Fh - Ch = Reserved + # PSU_IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR 0X0 + + # SD Config Register 3 + #(OFFSET, MASK, VALUE) (0XFF180324, 0x03C00000U ,0x00000000U) */ + mask_write 0XFF180324 0x03C00000 0x00000000 # : CAN # Register : RST_LPD_IOU2 @ 0XFF5E0238

@@ -12024,6 +12311,25 @@ set psu_peripherals_init_data { # This register controls various functionalities within the RTC #(OFFSET, MASK, VALUE) (0XFFA60040, 0x80000000U ,0x80000000U) */ mask_write 0XFFA60040 0x80000000 0x80000000 + # : TIMESTAMP COUNTER + # Register : base_frequency_ID_register @ 0XFF260020

+ + # Frequency in number of ticks per second. Valid range from 10 MHz to 100 MHz. + # PSU_IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ 0x5f5e100 + + # Program this register to match the clock frequency of the timestamp generator, in ticks per second. For example, for a 50 MHz + # clock, program 0x02FAF080. This register is not accessible to the read-only programming interface. + #(OFFSET, MASK, VALUE) (0XFF260020, 0xFFFFFFFFU ,0x05F5E100U) */ + mask_write 0XFF260020 0xFFFFFFFF 0x05F5E100 + # Register : counter_control_register @ 0XFF260000

+ + # Enable 0: The counter is disabled and not incrementing. 1: The counter is enabled and is incrementing. + # PSU_IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN 0x1 + + # Controls the counter increments. This register is not accessible to the read-only programming interface. + #(OFFSET, MASK, VALUE) (0XFF260000, 0x00000001U ,0x00000001U) */ + mask_write 0XFF260000 0x00000001 0x00000001 + # : TTC SRC SELECT } set psu_post_config_data { @@ -12035,6 +12341,75 @@ set psu_peripherals_powerdwn_data { # : POWER DOWN TRIGGER } +set psu_lpd_xppu_data { + # : XPPU INTERRUPT ENABLE + # Register : IEN @ 0XFF980018

+ + # See Interuppt Status Register for details + # PSU_LPD_XPPU_CFG_IEN_APER_PARITY 0X1 + + # See Interuppt Status Register for details + # PSU_LPD_XPPU_CFG_IEN_APER_TZ 0X1 + + # See Interuppt Status Register for details + # PSU_LPD_XPPU_CFG_IEN_APER_PERM 0X1 + + # See Interuppt Status Register for details + # PSU_LPD_XPPU_CFG_IEN_MID_PARITY 0X1 + + # See Interuppt Status Register for details + # PSU_LPD_XPPU_CFG_IEN_MID_RO 0X1 + + # See Interuppt Status Register for details + # PSU_LPD_XPPU_CFG_IEN_MID_MISS 0X1 + + # See Interuppt Status Register for details + # PSU_LPD_XPPU_CFG_IEN_INV_APB 0X1 + + # Interrupt Enable Register + #(OFFSET, MASK, VALUE) (0XFF980018, 0x000000EFU ,0x000000EFU) */ + mask_write 0XFF980018 0x000000EF 0x000000EF +} + +set psu_ddr_xmpu0_data { +} + +set psu_ddr_xmpu1_data { +} + +set psu_ddr_xmpu2_data { +} + +set psu_ddr_xmpu3_data { +} + +set psu_ddr_xmpu4_data { +} + +set psu_ddr_xmpu5_data { +} + +set psu_ocm_xmpu_data { +} + +set psu_fpd_xmpu_data { +} + +set psu_protection_lock_data { +} + +set psu_apply_master_tz { + # : RPU + # : DP TZ + # : SATA TZ + # : PCIE TZ + # : USB TZ + # : SD TZ + # : GEM TZ + # : QSPI TZ + # : NAND TZ +} + set psu_serdes_init_data { # : SERDES INITIALIZATION # : GT REFERENCE CLOCK SOURCE SELECTION @@ -12145,59 +12520,59 @@ set psu_serdes_init_data { # Register : L3_PLL_SS_STEPS_0_LSB @ 0XFD40E368

# Spread Spectrum No of Steps [7:0] - # PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x0 + # PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0xE0 # Spread Spectrum No of Steps bits 7:0 - #(OFFSET, MASK, VALUE) (0XFD40E368, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD40E368 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD40E368, 0x000000FFU ,0x000000E0U) */ + mask_write 0XFD40E368 0x000000FF 0x000000E0 # Register : L3_PLL_SS_STEPS_1_MSB @ 0XFD40E36C

# Spread Spectrum No of Steps [10:8] - # PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x0 + # PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x3 # Spread Spectrum No of Steps bits 10:8 - #(OFFSET, MASK, VALUE) (0XFD40E36C, 0x00000007U ,0x00000000U) */ - mask_write 0XFD40E36C 0x00000007 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD40E36C, 0x00000007U ,0x00000003U) */ + mask_write 0XFD40E36C 0x00000007 0x00000003 # Register : L1_PLL_SS_STEPS_0_LSB @ 0XFD406368

# Spread Spectrum No of Steps [7:0] - # PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x0 + # PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x58 # Spread Spectrum No of Steps bits 7:0 - #(OFFSET, MASK, VALUE) (0XFD406368, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD406368 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD406368, 0x000000FFU ,0x00000058U) */ + mask_write 0XFD406368 0x000000FF 0x00000058 # Register : L1_PLL_SS_STEPS_1_MSB @ 0XFD40636C

# Spread Spectrum No of Steps [10:8] - # PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x0 + # PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x3 # Spread Spectrum No of Steps bits 10:8 - #(OFFSET, MASK, VALUE) (0XFD40636C, 0x00000007U ,0x00000000U) */ - mask_write 0XFD40636C 0x00000007 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD40636C, 0x00000007U ,0x00000003U) */ + mask_write 0XFD40636C 0x00000007 0x00000003 # Register : L1_PLL_SS_STEP_SIZE_0_LSB @ 0XFD406370

# Step Size for Spread Spectrum [7:0] - # PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x0 + # PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x7C # Step Size for Spread Spectrum LSB - #(OFFSET, MASK, VALUE) (0XFD406370, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD406370 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD406370, 0x000000FFU ,0x0000007CU) */ + mask_write 0XFD406370 0x000000FF 0x0000007C # Register : L1_PLL_SS_STEP_SIZE_1 @ 0XFD406374

# Step Size for Spread Spectrum [15:8] - # PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x0 + # PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x33 # Step Size for Spread Spectrum 1 - #(OFFSET, MASK, VALUE) (0XFD406374, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD406374 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD406374, 0x000000FFU ,0x00000033U) */ + mask_write 0XFD406374 0x000000FF 0x00000033 # Register : L1_PLL_SS_STEP_SIZE_2 @ 0XFD406378

# Step Size for Spread Spectrum [23:16] - # PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x0 + # PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x2 # Step Size for Spread Spectrum 2 - #(OFFSET, MASK, VALUE) (0XFD406378, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD406378 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD406378, 0x000000FFU ,0x00000002U) */ + mask_write 0XFD406378 0x000000FF 0x00000002 # Register : L1_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40637C

# Step Size for Spread Spectrum [25:24] @@ -12253,27 +12628,27 @@ set psu_serdes_init_data { # Register : L3_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40E370

# Step Size for Spread Spectrum [7:0] - # PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x0 + # PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0xC9 # Step Size for Spread Spectrum LSB - #(OFFSET, MASK, VALUE) (0XFD40E370, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD40E370 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD40E370, 0x000000FFU ,0x000000C9U) */ + mask_write 0XFD40E370 0x000000FF 0x000000C9 # Register : L3_PLL_SS_STEP_SIZE_1 @ 0XFD40E374

# Step Size for Spread Spectrum [15:8] - # PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x0 + # PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0xD2 # Step Size for Spread Spectrum 1 - #(OFFSET, MASK, VALUE) (0XFD40E374, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD40E374 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD40E374, 0x000000FFU ,0x000000D2U) */ + mask_write 0XFD40E374 0x000000FF 0x000000D2 # Register : L3_PLL_SS_STEP_SIZE_2 @ 0XFD40E378

# Step Size for Spread Spectrum [23:16] - # PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x0 + # PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x1 # Step Size for Spread Spectrum 2 - #(OFFSET, MASK, VALUE) (0XFD40E378, 0x000000FFU ,0x00000000U) */ - mask_write 0XFD40E378 0x000000FF 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD40E378, 0x000000FFU ,0x00000001U) */ + mask_write 0XFD40E378 0x000000FF 0x00000001 # Register : L3_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40E37C

# Step Size for Spread Spectrum [25:24] @@ -12360,6 +12735,491 @@ set psu_serdes_init_data { # Opmode Info #(OFFSET, MASK, VALUE) (0XFD40CB00, 0x000000F0U ,0x000000F0U) */ mask_write 0XFD40CB00 0x000000F0 0x000000F0 + # : ENABLE CHICKEN BIT FOR PCIE AND USB + # Register : L0_TM_AUX_0 @ 0XFD4010CC

+ + # Spare- not used + # PSU_SERDES_L0_TM_AUX_0_BIT_2 1 + + # Spare registers + #(OFFSET, MASK, VALUE) (0XFD4010CC, 0x00000020U ,0x00000020U) */ + mask_write 0XFD4010CC 0x00000020 0x00000020 + # Register : L2_TM_AUX_0 @ 0XFD4090CC

+ + # Spare- not used + # PSU_SERDES_L2_TM_AUX_0_BIT_2 1 + + # Spare registers + #(OFFSET, MASK, VALUE) (0XFD4090CC, 0x00000020U ,0x00000020U) */ + mask_write 0XFD4090CC 0x00000020 0x00000020 + # : ENABLING EYE SURF + # Register : L0_TM_DIG_8 @ 0XFD401074

+ + # Enable Eye Surf + # PSU_SERDES_L0_TM_DIG_8_EYESURF_ENABLE 0x1 + + # Test modes for Elastic buffer and enabling Eye Surf + #(OFFSET, MASK, VALUE) (0XFD401074, 0x00000010U ,0x00000010U) */ + mask_write 0XFD401074 0x00000010 0x00000010 + # Register : L1_TM_DIG_8 @ 0XFD405074

+ + # Enable Eye Surf + # PSU_SERDES_L1_TM_DIG_8_EYESURF_ENABLE 0x1 + + # Test modes for Elastic buffer and enabling Eye Surf + #(OFFSET, MASK, VALUE) (0XFD405074, 0x00000010U ,0x00000010U) */ + mask_write 0XFD405074 0x00000010 0x00000010 + # Register : L2_TM_DIG_8 @ 0XFD409074

+ + # Enable Eye Surf + # PSU_SERDES_L2_TM_DIG_8_EYESURF_ENABLE 0x1 + + # Test modes for Elastic buffer and enabling Eye Surf + #(OFFSET, MASK, VALUE) (0XFD409074, 0x00000010U ,0x00000010U) */ + mask_write 0XFD409074 0x00000010 0x00000010 + # Register : L3_TM_DIG_8 @ 0XFD40D074

+ + # Enable Eye Surf + # PSU_SERDES_L3_TM_DIG_8_EYESURF_ENABLE 0x1 + + # Test modes for Elastic buffer and enabling Eye Surf + #(OFFSET, MASK, VALUE) (0XFD40D074, 0x00000010U ,0x00000010U) */ + mask_write 0XFD40D074 0x00000010 0x00000010 + # : ILL SETTINGS FOR GAIN AND LOCK SETTINGS + # Register : L0_TM_MISC2 @ 0XFD40189C

+ + # ILL calib counts BYPASSED with calcode bits + # PSU_SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + # sampler cal + #(OFFSET, MASK, VALUE) (0XFD40189C, 0x00000080U ,0x00000080U) */ + mask_write 0XFD40189C 0x00000080 0x00000080 + # Register : L0_TM_IQ_ILL1 @ 0XFD4018F8

+ + # IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + # PSU_SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x64 + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD4018F8, 0x000000FFU ,0x00000064U) */ + mask_write 0XFD4018F8 0x000000FF 0x00000064 + # Register : L0_TM_IQ_ILL2 @ 0XFD4018FC

+ + # IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + # PSU_SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x64 + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD4018FC, 0x000000FFU ,0x00000064U) */ + mask_write 0XFD4018FC 0x000000FF 0x00000064 + # Register : L0_TM_ILL12 @ 0XFD401990

+ + # G1A pll ctr bypass value + # PSU_SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x11 + + # ill pll counter values + #(OFFSET, MASK, VALUE) (0XFD401990, 0x000000FFU ,0x00000011U) */ + mask_write 0XFD401990 0x000000FF 0x00000011 + # Register : L0_TM_E_ILL1 @ 0XFD401924

+ + # E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + # PSU_SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0x4 + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD401924, 0x000000FFU ,0x00000004U) */ + mask_write 0XFD401924 0x000000FF 0x00000004 + # Register : L0_TM_E_ILL2 @ 0XFD401928

+ + # E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + # PSU_SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0xFE + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD401928, 0x000000FFU ,0x000000FEU) */ + mask_write 0XFD401928 0x000000FF 0x000000FE + # Register : L0_TM_IQ_ILL3 @ 0XFD401900

+ + # IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + # PSU_SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x64 + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD401900, 0x000000FFU ,0x00000064U) */ + mask_write 0XFD401900 0x000000FF 0x00000064 + # Register : L0_TM_E_ILL3 @ 0XFD40192C

+ + # E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + # PSU_SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x0 + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD40192C, 0x000000FFU ,0x00000000U) */ + mask_write 0XFD40192C 0x000000FF 0x00000000 + # Register : L0_TM_ILL8 @ 0XFD401980

+ + # ILL calibration code change wait time + # PSU_SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + # ILL cal routine control + #(OFFSET, MASK, VALUE) (0XFD401980, 0x000000FFU ,0x000000FFU) */ + mask_write 0XFD401980 0x000000FF 0x000000FF + # Register : L0_TM_IQ_ILL8 @ 0XFD401914

+ + # IQ ILL polytrim bypass value + # PSU_SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + # iqpi polytrim + #(OFFSET, MASK, VALUE) (0XFD401914, 0x000000FFU ,0x000000F7U) */ + mask_write 0XFD401914 0x000000FF 0x000000F7 + # Register : L0_TM_IQ_ILL9 @ 0XFD401918

+ + # bypass IQ polytrim + # PSU_SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + # enables for lf,constant gm trim and polytirm + #(OFFSET, MASK, VALUE) (0XFD401918, 0x00000001U ,0x00000001U) */ + mask_write 0XFD401918 0x00000001 0x00000001 + # Register : L0_TM_E_ILL8 @ 0XFD401940

+ + # E ILL polytrim bypass value + # PSU_SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + # epi polytrim + #(OFFSET, MASK, VALUE) (0XFD401940, 0x000000FFU ,0x000000F7U) */ + mask_write 0XFD401940 0x000000FF 0x000000F7 + # Register : L0_TM_E_ILL9 @ 0XFD401944

+ + # bypass E polytrim + # PSU_SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + # enables for lf,constant gm trim and polytirm + #(OFFSET, MASK, VALUE) (0XFD401944, 0x00000001U ,0x00000001U) */ + mask_write 0XFD401944 0x00000001 0x00000001 + # Register : L2_TM_MISC2 @ 0XFD40989C

+ + # ILL calib counts BYPASSED with calcode bits + # PSU_SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + # sampler cal + #(OFFSET, MASK, VALUE) (0XFD40989C, 0x00000080U ,0x00000080U) */ + mask_write 0XFD40989C 0x00000080 0x00000080 + # Register : L2_TM_IQ_ILL1 @ 0XFD4098F8

+ + # IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + # PSU_SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x1A + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD4098F8, 0x000000FFU ,0x0000001AU) */ + mask_write 0XFD4098F8 0x000000FF 0x0000001A + # Register : L2_TM_IQ_ILL2 @ 0XFD4098FC

+ + # IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + # PSU_SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x1A + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD4098FC, 0x000000FFU ,0x0000001AU) */ + mask_write 0XFD4098FC 0x000000FF 0x0000001A + # Register : L2_TM_ILL12 @ 0XFD409990

+ + # G1A pll ctr bypass value + # PSU_SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x10 + + # ill pll counter values + #(OFFSET, MASK, VALUE) (0XFD409990, 0x000000FFU ,0x00000010U) */ + mask_write 0XFD409990 0x000000FF 0x00000010 + # Register : L2_TM_E_ILL1 @ 0XFD409924

+ + # E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + # PSU_SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0xFE + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD409924, 0x000000FFU ,0x000000FEU) */ + mask_write 0XFD409924 0x000000FF 0x000000FE + # Register : L2_TM_E_ILL2 @ 0XFD409928

+ + # E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + # PSU_SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0x0 + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD409928, 0x000000FFU ,0x00000000U) */ + mask_write 0XFD409928 0x000000FF 0x00000000 + # Register : L2_TM_IQ_ILL3 @ 0XFD409900

+ + # IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + # PSU_SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x1A + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD409900, 0x000000FFU ,0x0000001AU) */ + mask_write 0XFD409900 0x000000FF 0x0000001A + # Register : L2_TM_E_ILL3 @ 0XFD40992C

+ + # E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + # PSU_SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x0 + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD40992C, 0x000000FFU ,0x00000000U) */ + mask_write 0XFD40992C 0x000000FF 0x00000000 + # Register : L2_TM_ILL8 @ 0XFD409980

+ + # ILL calibration code change wait time + # PSU_SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + # ILL cal routine control + #(OFFSET, MASK, VALUE) (0XFD409980, 0x000000FFU ,0x000000FFU) */ + mask_write 0XFD409980 0x000000FF 0x000000FF + # Register : L2_TM_IQ_ILL8 @ 0XFD409914

+ + # IQ ILL polytrim bypass value + # PSU_SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + # iqpi polytrim + #(OFFSET, MASK, VALUE) (0XFD409914, 0x000000FFU ,0x000000F7U) */ + mask_write 0XFD409914 0x000000FF 0x000000F7 + # Register : L2_TM_IQ_ILL9 @ 0XFD409918

+ + # bypass IQ polytrim + # PSU_SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + # enables for lf,constant gm trim and polytirm + #(OFFSET, MASK, VALUE) (0XFD409918, 0x00000001U ,0x00000001U) */ + mask_write 0XFD409918 0x00000001 0x00000001 + # Register : L2_TM_E_ILL8 @ 0XFD409940

+ + # E ILL polytrim bypass value + # PSU_SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + # epi polytrim + #(OFFSET, MASK, VALUE) (0XFD409940, 0x000000FFU ,0x000000F7U) */ + mask_write 0XFD409940 0x000000FF 0x000000F7 + # Register : L2_TM_E_ILL9 @ 0XFD409944

+ + # bypass E polytrim + # PSU_SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + # enables for lf,constant gm trim and polytirm + #(OFFSET, MASK, VALUE) (0XFD409944, 0x00000001U ,0x00000001U) */ + mask_write 0XFD409944 0x00000001 0x00000001 + # Register : L3_TM_MISC2 @ 0XFD40D89C

+ + # ILL calib counts BYPASSED with calcode bits + # PSU_SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + # sampler cal + #(OFFSET, MASK, VALUE) (0XFD40D89C, 0x00000080U ,0x00000080U) */ + mask_write 0XFD40D89C 0x00000080 0x00000080 + # Register : L3_TM_IQ_ILL1 @ 0XFD40D8F8

+ + # IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + # PSU_SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x7D + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD40D8F8, 0x000000FFU ,0x0000007DU) */ + mask_write 0XFD40D8F8 0x000000FF 0x0000007D + # Register : L3_TM_IQ_ILL2 @ 0XFD40D8FC

+ + # IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + # PSU_SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x7D + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD40D8FC, 0x000000FFU ,0x0000007DU) */ + mask_write 0XFD40D8FC 0x000000FF 0x0000007D + # Register : L3_TM_ILL12 @ 0XFD40D990

+ + # G1A pll ctr bypass value + # PSU_SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x1 + + # ill pll counter values + #(OFFSET, MASK, VALUE) (0XFD40D990, 0x000000FFU ,0x00000001U) */ + mask_write 0XFD40D990 0x000000FF 0x00000001 + # Register : L3_TM_E_ILL1 @ 0XFD40D924

+ + # E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + # PSU_SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0x9C + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD40D924, 0x000000FFU ,0x0000009CU) */ + mask_write 0XFD40D924 0x000000FF 0x0000009C + # Register : L3_TM_E_ILL2 @ 0XFD40D928

+ + # E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + # PSU_SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0x39 + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD40D928, 0x000000FFU ,0x00000039U) */ + mask_write 0XFD40D928 0x000000FF 0x00000039 + # Register : L3_TM_ILL11 @ 0XFD40D98C

+ + # G2A_PCIe1 PLL ctr bypass value + # PSU_SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL 0x2 + + # ill pll counter values + #(OFFSET, MASK, VALUE) (0XFD40D98C, 0x000000F0U ,0x00000020U) */ + mask_write 0XFD40D98C 0x000000F0 0x00000020 + # Register : L3_TM_IQ_ILL3 @ 0XFD40D900

+ + # IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + # PSU_SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x7D + + # iqpi cal code + #(OFFSET, MASK, VALUE) (0XFD40D900, 0x000000FFU ,0x0000007DU) */ + mask_write 0XFD40D900 0x000000FF 0x0000007D + # Register : L3_TM_E_ILL3 @ 0XFD40D92C

+ + # E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + # PSU_SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x64 + + # epi cal code + #(OFFSET, MASK, VALUE) (0XFD40D92C, 0x000000FFU ,0x00000064U) */ + mask_write 0XFD40D92C 0x000000FF 0x00000064 + # Register : L3_TM_ILL8 @ 0XFD40D980

+ + # ILL calibration code change wait time + # PSU_SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + # ILL cal routine control + #(OFFSET, MASK, VALUE) (0XFD40D980, 0x000000FFU ,0x000000FFU) */ + mask_write 0XFD40D980 0x000000FF 0x000000FF + # Register : L3_TM_IQ_ILL8 @ 0XFD40D914

+ + # IQ ILL polytrim bypass value + # PSU_SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + # iqpi polytrim + #(OFFSET, MASK, VALUE) (0XFD40D914, 0x000000FFU ,0x000000F7U) */ + mask_write 0XFD40D914 0x000000FF 0x000000F7 + # Register : L3_TM_IQ_ILL9 @ 0XFD40D918

+ + # bypass IQ polytrim + # PSU_SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + # enables for lf,constant gm trim and polytirm + #(OFFSET, MASK, VALUE) (0XFD40D918, 0x00000001U ,0x00000001U) */ + mask_write 0XFD40D918 0x00000001 0x00000001 + # Register : L3_TM_E_ILL8 @ 0XFD40D940

+ + # E ILL polytrim bypass value + # PSU_SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + # epi polytrim + #(OFFSET, MASK, VALUE) (0XFD40D940, 0x000000FFU ,0x000000F7U) */ + mask_write 0XFD40D940 0x000000FF 0x000000F7 + # Register : L3_TM_E_ILL9 @ 0XFD40D944

+ + # bypass E polytrim + # PSU_SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + # enables for lf,constant gm trim and polytirm + #(OFFSET, MASK, VALUE) (0XFD40D944, 0x00000001U ,0x00000001U) */ + mask_write 0XFD40D944 0x00000001 0x00000001 + # : SYMBOL LOCK AND WAIT + # Register : L0_TM_DIG_21 @ 0XFD4010A8

+ + # pre lock comma count threshold. 2'b 00 : 3, 2'b 01 : 5, 2'b 10 : 10, 2'b 11 : 20 + # PSU_SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH 0x11 + + # Control symbol alignment locking - wait counts + #(OFFSET, MASK, VALUE) (0XFD4010A8, 0x00000003U ,0x00000003U) */ + mask_write 0XFD4010A8 0x00000003 0x00000003 + # Register : L0_TM_DIG_10 @ 0XFD40107C

+ + # CDR lock wait time. (1-16 us). cdr_lock_wait_time = 4'b xxxx + 4'b 0001 + # PSU_SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME 0xF + + # test control for changing cdr lock wait time + #(OFFSET, MASK, VALUE) (0XFD40107C, 0x0000000FU ,0x0000000FU) */ + mask_write 0XFD40107C 0x0000000F 0x0000000F + # : SIOU SETTINGS FOR BYPASS CONTROL,HSRX-DIG + # Register : L0_TM_RST_DLY @ 0XFD4019A4

+ + # Delay apb reset by specified amount + # PSU_SERDES_L0_TM_RST_DLY_APB_RST_DLY 0xFF + + # reset delay for apb reset w.r.t pso of hsrx + #(OFFSET, MASK, VALUE) (0XFD4019A4, 0x000000FFU ,0x000000FFU) */ + mask_write 0XFD4019A4 0x000000FF 0x000000FF + # Register : L0_TM_ANA_BYP_15 @ 0XFD401038

+ + # Enable Bypass for <7> of TM_ANA_BYPS_15 + # PSU_SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + # Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + #(OFFSET, MASK, VALUE) (0XFD401038, 0x00000040U ,0x00000040U) */ + mask_write 0XFD401038 0x00000040 0x00000040 + # Register : L0_TM_ANA_BYP_12 @ 0XFD40102C

+ + # Enable Bypass for <7> of TM_ANA_BYPS_12 + # PSU_SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + # Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + #(OFFSET, MASK, VALUE) (0XFD40102C, 0x00000040U ,0x00000040U) */ + mask_write 0XFD40102C 0x00000040 0x00000040 + # Register : L1_TM_RST_DLY @ 0XFD4059A4

+ + # Delay apb reset by specified amount + # PSU_SERDES_L1_TM_RST_DLY_APB_RST_DLY 0xFF + + # reset delay for apb reset w.r.t pso of hsrx + #(OFFSET, MASK, VALUE) (0XFD4059A4, 0x000000FFU ,0x000000FFU) */ + mask_write 0XFD4059A4 0x000000FF 0x000000FF + # Register : L1_TM_ANA_BYP_15 @ 0XFD405038

+ + # Enable Bypass for <7> of TM_ANA_BYPS_15 + # PSU_SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + # Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + #(OFFSET, MASK, VALUE) (0XFD405038, 0x00000040U ,0x00000040U) */ + mask_write 0XFD405038 0x00000040 0x00000040 + # Register : L1_TM_ANA_BYP_12 @ 0XFD40502C

+ + # Enable Bypass for <7> of TM_ANA_BYPS_12 + # PSU_SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + # Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + #(OFFSET, MASK, VALUE) (0XFD40502C, 0x00000040U ,0x00000040U) */ + mask_write 0XFD40502C 0x00000040 0x00000040 + # Register : L2_TM_RST_DLY @ 0XFD4099A4

+ + # Delay apb reset by specified amount + # PSU_SERDES_L2_TM_RST_DLY_APB_RST_DLY 0xFF + + # reset delay for apb reset w.r.t pso of hsrx + #(OFFSET, MASK, VALUE) (0XFD4099A4, 0x000000FFU ,0x000000FFU) */ + mask_write 0XFD4099A4 0x000000FF 0x000000FF + # Register : L2_TM_ANA_BYP_15 @ 0XFD409038

+ + # Enable Bypass for <7> of TM_ANA_BYPS_15 + # PSU_SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + # Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + #(OFFSET, MASK, VALUE) (0XFD409038, 0x00000040U ,0x00000040U) */ + mask_write 0XFD409038 0x00000040 0x00000040 + # Register : L2_TM_ANA_BYP_12 @ 0XFD40902C

+ + # Enable Bypass for <7> of TM_ANA_BYPS_12 + # PSU_SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + # Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + #(OFFSET, MASK, VALUE) (0XFD40902C, 0x00000040U ,0x00000040U) */ + mask_write 0XFD40902C 0x00000040 0x00000040 + # Register : L3_TM_RST_DLY @ 0XFD40D9A4

+ + # Delay apb reset by specified amount + # PSU_SERDES_L3_TM_RST_DLY_APB_RST_DLY 0xFF + + # reset delay for apb reset w.r.t pso of hsrx + #(OFFSET, MASK, VALUE) (0XFD40D9A4, 0x000000FFU ,0x000000FFU) */ + mask_write 0XFD40D9A4 0x000000FF 0x000000FF + # Register : L3_TM_ANA_BYP_15 @ 0XFD40D038

+ + # Enable Bypass for <7> of TM_ANA_BYPS_15 + # PSU_SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + # Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + #(OFFSET, MASK, VALUE) (0XFD40D038, 0x00000040U ,0x00000040U) */ + mask_write 0XFD40D038 0x00000040 0x00000040 + # Register : L3_TM_ANA_BYP_12 @ 0XFD40D02C

+ + # Enable Bypass for <7> of TM_ANA_BYPS_12 + # PSU_SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + # Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + #(OFFSET, MASK, VALUE) (0XFD40D02C, 0x00000040U ,0x00000040U) */ + mask_write 0XFD40D02C 0x00000040 0x00000040 # : GT LANE SETTINGS # Register : ICM_CFG0 @ 0XFD410010

@@ -12417,6 +13277,54 @@ set psu_serdes_init_data { # Enable Override of TX deemphasis #(OFFSET, MASK, VALUE) (0XFD4041D8, 0x00000001U ,0x00000001U) */ mask_write 0XFD4041D8 0x00000001 0x00000001 + # Register : L3_TX_ANA_TM_118 @ 0XFD40C1D8

+ + # Test register force for enabling/disablign TX deemphasis bits <17:0> + # PSU_SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0 0x1 + + # Enable Override of TX deemphasis + #(OFFSET, MASK, VALUE) (0XFD40C1D8, 0x00000001U ,0x00000001U) */ + mask_write 0XFD40C1D8 0x00000001 0x00000001 + # : CDR AND RX EQUALIZATION SETTINGS + # Register : L3_TM_CDR5 @ 0XFD40DC14

+ + # FPHL FSM accumulate cycles + # PSU_SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES 0x7 + + # FFL Phase0 int gain aka 2ol SD update rate + # PSU_SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN 0x6 + + # Fast phase lock controls -- FSM accumulator cycle control and phase 0 int gain control. + #(OFFSET, MASK, VALUE) (0XFD40DC14, 0x000000FFU ,0x000000E6U) */ + mask_write 0XFD40DC14 0x000000FF 0x000000E6 + # Register : L3_TM_CDR16 @ 0XFD40DC40

+ + # FFL Phase0 prop gain aka 1ol SD update rate + # PSU_SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN 0xC + + # Fast phase lock controls -- phase 0 prop gain + #(OFFSET, MASK, VALUE) (0XFD40DC40, 0x0000001FU ,0x0000000CU) */ + mask_write 0XFD40DC40 0x0000001F 0x0000000C + # Register : L3_TM_EQ0 @ 0XFD40D94C

+ + # EQ stg 2 controls BYPASSED + # PSU_SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP 1 + + # eq stg1 and stg2 controls + #(OFFSET, MASK, VALUE) (0XFD40D94C, 0x00000020U ,0x00000020U) */ + mask_write 0XFD40D94C 0x00000020 0x00000020 + # Register : L3_TM_EQ1 @ 0XFD40D950

+ + # EQ STG2 RL PROG + # PSU_SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG 0x2 + + # EQ stg 2 preamp mode val + # PSU_SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL 0x1 + + # eq stg1 and stg2 controls + #(OFFSET, MASK, VALUE) (0XFD40D950, 0x00000007U ,0x00000006U) */ + mask_write 0XFD40D950 0x00000007 0x00000006 + # : GEM SERDES SETTINGS # : ENABLE PRE EMPHAIS AND VOLTAGE SWING # Register : L1_TXPMD_TM_48 @ 0XFD404CC0

@@ -12434,6 +13342,14 @@ set psu_serdes_init_data { # Override for PIPE TX de-emphasis #(OFFSET, MASK, VALUE) (0XFD404048, 0x000000FFU ,0x00000000U) */ mask_write 0XFD404048 0x000000FF 0x00000000 + # Register : L3_TX_ANA_TM_18 @ 0XFD40C048

+ + # pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved + # PSU_SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0 0x1 + + # Override for PIPE TX de-emphasis + #(OFFSET, MASK, VALUE) (0XFD40C048, 0x000000FFU ,0x00000001U) */ + mask_write 0XFD40C048 0x000000FF 0x00000001 } set psu_resetout_init_data { @@ -12456,6 +13372,14 @@ set psu_resetout_init_data { # fpd_power_prsnt #(OFFSET, MASK, VALUE) (0XFF9D0080, 0x00000001U ,0x00000001U) */ mask_write 0XFF9D0080 0x00000001 0x00000001 + # Register : fpd_pipe_clk @ 0XFF9D007C

+ + # This bit is used to choose between PIPE clock coming from SerDes and the suspend clk + # PSU_USB3_0_FPD_PIPE_CLK_OPTION 0x0 + + # fpd_pipe_clk + #(OFFSET, MASK, VALUE) (0XFF9D007C, 0x00000001U ,0x00000000U) */ + mask_write 0XFF9D007C 0x00000001 0x00000000 # : # Register : RST_LPD_TOP @ 0XFF5E023C

@@ -12494,21 +13418,18 @@ set psu_resetout_init_data { # FPD Block level software controlled reset #(OFFSET, MASK, VALUE) (0XFD1A0100, 0x00000002U ,0x00000000U) */ mask_write 0XFD1A0100 0x00000002 0x00000000 - # : PUTTING PCIE IN RESET + # : PUTTING PCIE CFG AND BRIDGE IN RESET # Register : RST_FPD_TOP @ 0XFD1A0100

# PCIE config reset # PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET 0X0 - # PCIE control block level reset - # PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET 0X0 - # PCIE bridge block level reset (AXI interface) # PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET 0X0 # FPD Block level software controlled reset - #(OFFSET, MASK, VALUE) (0XFD1A0100, 0x000E0000U ,0x00000000U) */ - mask_write 0XFD1A0100 0x000E0000 0x00000000 + #(OFFSET, MASK, VALUE) (0XFD1A0100, 0x000C0000U ,0x00000000U) */ + mask_write 0XFD1A0100 0x000C0000 0x00000000 # : PUTTING DP IN RESET # Register : RST_FPD_TOP @ 0XFD1A0100

@@ -12544,7 +13465,7 @@ set psu_resetout_init_data { # . The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit # UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger # alue. Note: This field is valid only in device mode. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM 0X9 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM 0x9 # Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio # of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the @@ -12552,7 +13473,7 @@ set psu_resetout_init_data { # ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power # off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur # ng hibernation. - This bit is valid only in device mode. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY 0X0 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY 0x0 # Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen # _n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre @@ -12561,42 +13482,33 @@ set psu_resetout_init_data { # n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma # d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet # d. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM 0X0 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM 0x0 # USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P # Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - # 'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte # in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i # active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL 0X0 - - # Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co - # figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app - # ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F - # r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s - # t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati - # g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi - # when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20 0X1 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL 0x0 # Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1 # full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with # ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U # B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF 0X0 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF 0x0 # ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa # e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons # ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s # lected through DWC_USB3_HSPHY_INTERFACE. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL 0X1 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL 0x1 # PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a # 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same # lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen # ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I # any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz. - # PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF 0X0 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF 0x0 # HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by # a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for @@ -12606,13 +13518,13 @@ set psu_resetout_init_data { # ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH # clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One # 60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times - # PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL 0X7 + # PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL 0x7 # Global USB2 PHY Configuration Register The application must program this register before starting any transactions on either # he SoC bus or the USB. In Device-only configurations, only one register is needed. In Host mode, per-port registers are imple # ented. - #(OFFSET, MASK, VALUE) (0XFE20C200, 0x00003FFFU ,0x00002457U) */ - mask_write 0XFE20C200 0x00003FFF 0x00002457 + #(OFFSET, MASK, VALUE) (0XFE20C200, 0x00003FBFU ,0x00002417U) */ + mask_write 0XFE20C200 0x00003FBF 0x00002417 # Register : GFLADJ @ 0XFE20C630

# This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk. This register @@ -12624,7 +13536,7 @@ set psu_resetout_init_data { # uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ = # ((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P # RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value) - # PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ 0X0 + # PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ 0x0 # Global Frame Length Adjustment Register This register provides options for the software to control the core behavior with res # ect to SOF (Start of Frame) and ITP (Isochronous Timestamp Packet) timers and frame timer functionality. It provides an optio @@ -12632,40 +13544,7 @@ set psu_resetout_init_data { # rom the ref_clk. This facilitates hardware LPM in host mode with the SOF or ITP counters being run from the ref_clk signal. #(OFFSET, MASK, VALUE) (0XFE20C630, 0x003FFF00U ,0x00000000U) */ mask_write 0XFE20C630 0x003FFF00 0x00000000 - # : CHECK PLL LOCK FOR LANE0 - # Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

- - # Status Read value of PLL Lock - # PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - mask_poll 0XFD4023E4 0x00000010 - # : CHECK PLL LOCK FOR LANE1 - # Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

- - # Status Read value of PLL Lock - # PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - mask_poll 0XFD4063E4 0x00000010 - # : CHECK PLL LOCK FOR LANE2 - # Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

- - # Status Read value of PLL Lock - # PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - mask_poll 0XFD40A3E4 0x00000010 - # : CHECK PLL LOCK FOR LANE3 - # Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

- - # Status Read value of PLL Lock - # PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - mask_poll 0XFD40E3E4 0x00000010 # : UPDATING TWO PCIE REGISTERS DEFAULT VALUES, AS THESE REGISTERS HAVE INCORRECT RESET VALUES IN SILICON. - # Register : ATTR_37 @ 0XFD480094

- - # Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r - # gister.; EP=0x0001; RP=0x0001 - # PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY 0X1 - - # ATTR_37 - #(OFFSET, MASK, VALUE) (0XFD480094, 0x00004000U ,0x00004000U) */ - mask_write 0XFD480094 0x00004000 0x00004000 # Register : ATTR_25 @ 0XFD480064

# If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root @@ -13029,9 +13908,13 @@ set psu_resetout_init_data { # Required for Root.; EP=0x0000; RP=0x0001 # PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP 0x1 + # Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r + # gister.; EP=0x0001; RP=0x0001 + # PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY 0x1 + # ATTR_37 - #(OFFSET, MASK, VALUE) (0XFD480094, 0x00000200U ,0x00000200U) */ - mask_write 0XFD480094 0x00000200 0x00000200 + #(OFFSET, MASK, VALUE) (0XFD480094, 0x00004200U ,0x00004200U) */ + mask_write 0XFD480094 0x00004200 0x00004200 # Register : ATTR_93 @ 0XFD480174

# Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L @@ -13138,6 +14021,173 @@ set psu_resetout_init_data { # ATTR_43 #(OFFSET, MASK, VALUE) (0XFD4800AC, 0x00000100U ,0x00000000U) */ mask_write 0XFD4800AC 0x00000100 0x00000000 + # Register : ATTR_48 @ 0XFD4800C0

+ + # MSI-X Table Size. This value is transferred to the MSI-X Message Control[10:0] field. Set to 0 if MSI-X is not enabled. Note + # hat the core does not implement the table; that must be implemented in user logic.; EP=0x0003; RP=0x0000 + # PSU_PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE 0 + + # ATTR_48 + #(OFFSET, MASK, VALUE) (0XFD4800C0, 0x000007FFU ,0x00000000U) */ + mask_write 0XFD4800C0 0x000007FF 0x00000000 + # Register : ATTR_46 @ 0XFD4800B8

+ + # MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0001; + # P=0x0000 + # PSU_PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET 0 + + # ATTR_46 + #(OFFSET, MASK, VALUE) (0XFD4800B8, 0x0000FFFFU ,0x00000000U) */ + mask_write 0XFD4800B8 0x0000FFFF 0x00000000 + # Register : ATTR_47 @ 0XFD4800BC

+ + # MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0000; + # P=0x0000 + # PSU_PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET 0 + + # ATTR_47 + #(OFFSET, MASK, VALUE) (0XFD4800BC, 0x00001FFFU ,0x00000000U) */ + mask_write 0XFD4800BC 0x00001FFF 0x00000000 + # Register : ATTR_44 @ 0XFD4800B0

+ + # MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + # 0x0001; RP=0x0000 + # PSU_PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET 0 + + # ATTR_44 + #(OFFSET, MASK, VALUE) (0XFD4800B0, 0x0000FFFFU ,0x00000000U) */ + mask_write 0XFD4800B0 0x0000FFFF 0x00000000 + # Register : ATTR_45 @ 0XFD4800B4

+ + # MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + # 0x1000; RP=0x0000 + # PSU_PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET 0 + + # ATTR_45 + #(OFFSET, MASK, VALUE) (0XFD4800B4, 0x0000FFF8U ,0x00000000U) */ + mask_write 0XFD4800B4 0x0000FFF8 0x00000000 + # Register : CB @ 0XFD48031C

+ + # DT837748 Enable + # PSU_PCIE_ATTRIB_CB_CB1 0x0 + + # ECO Register 1 + #(OFFSET, MASK, VALUE) (0XFD48031C, 0x00000002U ,0x00000000U) */ + mask_write 0XFD48031C 0x00000002 0x00000000 + # Register : ATTR_35 @ 0XFD48008C

+ + # Active State PM Support. Indicates the level of active state power management supported by the selected PCI Express Link, enc + # ded as follows: 0 Reserved, 1 L0s entry supported, 2 Reserved, 3 L0s and L1 entry supported.; EP=0x0001; RP=0x0001 + # PSU_PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT 0x0 + + # ATTR_35 + #(OFFSET, MASK, VALUE) (0XFD48008C, 0x00003000U ,0x00000000U) */ + mask_write 0XFD48008C 0x00003000 0x00000000 + # : PUTTING PCIE CONTROL IN RESET + # Register : RST_FPD_TOP @ 0XFD1A0100

+ + # PCIE control block level reset + # PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET 0X0 + + # FPD Block level software controlled reset + #(OFFSET, MASK, VALUE) (0XFD1A0100, 0x00020000U ,0x00000000U) */ + mask_write 0XFD1A0100 0x00020000 0x00000000 + # : CHECK PLL LOCK FOR LANE0 + # Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

+ + # Status Read value of PLL Lock + # PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + mask_poll 0XFD4023E4 0x00000010 + # : CHECK PLL LOCK FOR LANE1 + # Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

+ + # Status Read value of PLL Lock + # PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + mask_poll 0XFD4063E4 0x00000010 + # : CHECK PLL LOCK FOR LANE2 + # Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

+ + # Status Read value of PLL Lock + # PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + mask_poll 0XFD40A3E4 0x00000010 + # : CHECK PLL LOCK FOR LANE3 + # Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

+ + # Status Read value of PLL Lock + # PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + mask_poll 0XFD40E3E4 0x00000010 + # : SATA AHCI VENDOR SETTING + # Register : PP2C @ 0XFD0C00AC

+ + # CIBGMN: COMINIT Burst Gap Minimum. + # PSU_SATA_AHCI_VENDOR_PP2C_CIBGMN 0x18 + + # CIBGMX: COMINIT Burst Gap Maximum. + # PSU_SATA_AHCI_VENDOR_PP2C_CIBGMX 0x40 + + # CIBGN: COMINIT Burst Gap Nominal. + # PSU_SATA_AHCI_VENDOR_PP2C_CIBGN 0x18 + + # CINMP: COMINIT Negate Minimum Period. + # PSU_SATA_AHCI_VENDOR_PP2C_CINMP 0x28 + + # PP2C - Port Phy2Cfg Register. This register controls the configuration of the Phy Control OOB timing for the COMINIT paramete + # s for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + #(OFFSET, MASK, VALUE) (0XFD0C00AC, 0xFFFFFFFFU ,0x28184018U) */ + mask_write 0XFD0C00AC 0xFFFFFFFF 0x28184018 + # Register : PP3C @ 0XFD0C00B0

+ + # CWBGMN: COMWAKE Burst Gap Minimum. + # PSU_SATA_AHCI_VENDOR_PP3C_CWBGMN 0x06 + + # CWBGMX: COMWAKE Burst Gap Maximum. + # PSU_SATA_AHCI_VENDOR_PP3C_CWBGMX 0x14 + + # CWBGN: COMWAKE Burst Gap Nominal. + # PSU_SATA_AHCI_VENDOR_PP3C_CWBGN 0x08 + + # CWNMP: COMWAKE Negate Minimum Period. + # PSU_SATA_AHCI_VENDOR_PP3C_CWNMP 0x0E + + # PP3C - Port Phy3CfgRegister. This register controls the configuration of the Phy Control OOB timing for the COMWAKE parameter + # for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + #(OFFSET, MASK, VALUE) (0XFD0C00B0, 0xFFFFFFFFU ,0x0E081406U) */ + mask_write 0XFD0C00B0 0xFFFFFFFF 0x0E081406 + # Register : PP4C @ 0XFD0C00B4

+ + # BMX: COM Burst Maximum. + # PSU_SATA_AHCI_VENDOR_PP4C_BMX 0x13 + + # BNM: COM Burst Nominal. + # PSU_SATA_AHCI_VENDOR_PP4C_BNM 0x08 + + # SFD: Signal Failure Detection, if the signal detection de-asserts for a time greater than this then the OOB detector will det + # rmine this is a line idle and cause the PhyInit state machine to exit the Phy Ready State. A value of zero disables the Signa + # Failure Detector. The value is based on the OOB Detector Clock typically (PMCLK Clock Period) * SFD giving a nominal time of + # 500ns based on a 150MHz PMCLK. + # PSU_SATA_AHCI_VENDOR_PP4C_SFD 0x4A + + # PTST: Partial to Slumber timer value, specific delay the controller should apply while in partial before entering slumber. Th + # value is bases on the system clock divided by 128, total delay = (Sys Clock Period) * PTST * 128 + # PSU_SATA_AHCI_VENDOR_PP4C_PTST 0x06 + + # PP4C - Port Phy4Cfg Register. This register controls the configuration of the Phy Control Burst timing for the COM parameters + # for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + #(OFFSET, MASK, VALUE) (0XFD0C00B4, 0xFFFFFFFFU ,0x064A0813U) */ + mask_write 0XFD0C00B4 0xFFFFFFFF 0x064A0813 + # Register : PP5C @ 0XFD0C00B8

+ + # RIT: Retry Interval Timer. The calculated value divided by two, the lower digit of precision is not needed. + # PSU_SATA_AHCI_VENDOR_PP5C_RIT 0xC96A4 + + # RCT: Rate Change Timer, a value based on the 54.2us for which a SATA device will transmit at a fixed rate ALIGNp after OOB ha + # completed, for a fast SERDES it is suggested that this value be 54.2us / 4 + # PSU_SATA_AHCI_VENDOR_PP5C_RCT 0x3FF + + # PP5C - Port Phy5Cfg Register. This register controls the configuration of the Phy Control Retry Interval timing for either Po + # t 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + #(OFFSET, MASK, VALUE) (0XFD0C00B8, 0xFFFFFFFFU ,0x3FFC96A4U) */ + mask_write 0XFD0C00B8 0xFFFFFFFF 0x3FFC96A4 } set psu_resetin_init_data { @@ -13438,9 +14488,15 @@ proc init_serdes {} { proc poll { addr mask data} { set curval "0x[string range [mrd -force $addr] end-8 end]" set maskedval [expr {$curval & $mask}] + set count 1 while { $maskedval != $data } { set curval "0x[string range [mrd -force $addr] end-8 end]" set maskedval [expr {$curval & $mask}] + set count [ expr { $count + 1 } ] + if { $count == 100000000 } { + puts "Timeout Reached. Mask poll failed at ADDRESS: $addr MASK: $mask" + break + } } } @@ -13465,13 +14521,97 @@ proc init_peripheral {} { mask_write 0xFD690030 0x00000001 0x00000000 } +proc psu_init_xppu_aper_ram {} { + set APER_OFFSET 0xFF981000 + set i 0 + while { $i <= 400 } { + mask_write $APER_OFFSET 0xF80FFFFF 0x08080000 + set APER_OFFSET [ expr $APER_OFFSET + 4 ] + set APER_OFFSET "0x[format %08X [ expr $APER_OFFSET] ]" + set i [ expr { $i + 1 } ] + } + +} +proc psu_lpd_protection {} { + set saved_mode [configparams force-mem-accesses] + configparams force-mem-accesses 1 + + psu_init_xppu_aper_ram; + variable psu_lpd_xppu_data + init_ps [subst {$psu_lpd_xppu_data }] + + configparams force-mem-accesses $saved_mode +} + +proc psu_ddr_protection {} { + set saved_mode [configparams force-mem-accesses] + configparams force-mem-accesses 1 + + variable psu_ddr_xmpu0_data + variable psu_ddr_xmpu1_data + variable psu_ddr_xmpu2_data + variable psu_ddr_xmpu3_data + variable psu_ddr_xmpu4_data + variable psu_ddr_xmpu5_data + init_ps [subst {$psu_ddr_xmpu0_data $psu_ddr_xmpu1_data $psu_ddr_xmpu2_data $psu_ddr_xmpu3_data $psu_ddr_xmpu4_data $psu_ddr_xmpu5_data}] + + configparams force-mem-accesses $saved_mode +} + +proc psu_ocm_protection {} { + set saved_mode [configparams force-mem-accesses] + configparams force-mem-accesses 1 + + variable psu_ocm_xmpu_data + init_ps [subst {$psu_ocm_xmpu_data }] + + configparams force-mem-accesses $saved_mode +} + +proc psu_fpd_protection {} { + set saved_mode [configparams force-mem-accesses] + configparams force-mem-accesses 1 + + variable psu_fpd_xmpu_data + init_ps [subst {$psu_fpd_xmpu_data }] + + configparams force-mem-accesses $saved_mode +} + +proc psu_protection_lock {} { + set saved_mode [configparams force-mem-accesses] + configparams force-mem-accesses 1 + + variable psu_protection_lock_data + init_ps [subst {$psu_protection_lock_data }] + + configparams force-mem-accesses $saved_mode +} + +proc psu_protection {} { + psu_ddr_protection + psu_ocm_protection + psu_fpd_protection + psu_lpd_protection +} + proc psu_ddr_phybringup_data {} { -mwr -force 0xFD090000 0x0000A845 -mwr -force 0xFD090004 0x003FFFFF -mwr -force 0xFD09000C 0x00000010 -mwr -force 0xFD090010 0x00000010 +set dpll_divisor [expr {(0x00003F00 & [mrd -force -value 0xFD1A0080]) >> 0x00000008 }] + psu_mask_write 0xFD1A0080 0x00003F00 0x00000500 + psu_mask_write 0xFD080028 0x00000001 0x00000001 +mwr -force 0xFD080004 0x00040003 +mask_poll 0xFD080030 0x00000001 + psu_mask_write 0xFD080684 0x06000000 0x02000000 + psu_mask_write 0xFD0806A4 0x06000000 0x02000000 + psu_mask_write 0xFD0806C4 0x06000000 0x02000000 + psu_mask_write 0xFD0806E4 0x06000000 0x02000000 + psu_mask_write 0xFD1A0080 0x3F00 [expr {($dpll_divisor << 8)}] +mwr -force 0xFD080004 0x40040071 +mask_poll 0xFD080030 0x00000001 +mwr -force 0xFD080004 0x40040001 +mask_poll 0xFD080030 0x00000001 poll 0xFD080030 0x0000000F 0x0000000F psu_mask_write 0xFD080004 0x00000001 0x00000001 @@ -13505,29 +14645,34 @@ poll 0xFD080030 0x00000FFF 0x00000FFF # Run Vref training in static read mode -mwr -force 0xFD080200 0x110011C7 +mwr -force 0xFD080200 0x100091C7 mwr -force 0xFD080018 0x00F01EF2 -mwr -force 0xFD08001C 0x55AA0098 -mwr -force 0xFD08142C 0x00001830 -mwr -force 0xFD08146C 0x00001830 -mwr -force 0xFD0814AC 0x00001830 -mwr -force 0xFD0814EC 0x00001830 -mwr -force 0xFD08152C 0x00001830 +mwr -force 0xFD08001C 0x55AA5498 +mwr -force 0xFD08142C 0x00041830 +mwr -force 0xFD08146C 0x00041830 +mwr -force 0xFD0814AC 0x00041830 +mwr -force 0xFD0814EC 0x00041830 +mwr -force 0xFD08152C 0x00041830 psu_mask_write 0xFD080004 0xFFFFFFFF 0x00060001 #trigger VreFPHY training -poll 0xFD080030 0x00004001 0x00004001 +poll 0xFD080030 0x00000C01 0x00000C01 #//Poll PUB_PGSR0 for Trng complete - # Vref training is complete, disabling static read mode -mwr -force 0xFD080200 0x810011C7 +mwr -force 0xFD080200 0x800091C7 mwr -force 0xFD080018 0x00F12302 -mwr -force 0xFD08001C 0x55AA0080 -mwr -force 0xFD08142C 0x00001800 -mwr -force 0xFD08146C 0x00001800 -mwr -force 0xFD0814AC 0x00001800 -mwr -force 0xFD0814EC 0x00001800 -mwr -force 0xFD08152C 0x00001800 +mwr -force 0xFD08001C 0x55AA5480 +mwr -force 0xFD08142C 0x00041800 +mwr -force 0xFD08146C 0x00041800 +mwr -force 0xFD0814AC 0x00041800 +mwr -force 0xFD0814EC 0x00041800 +mwr -force 0xFD08152C 0x00041800 +psu_mask_write 0xFD080004 0xFFFFFFFF 0x0000C001 + + #trigger VreFPHY training +poll 0xFD080030 0x00004001 0x00004001 + + #//Poll PUB_PGSR0 for Trng complete mwr -force 0xFD070180 0x01000040 mwr -force 0xFD070060 0x00000000 psu_mask_write 0xFD080014 0x00000040 0x00000000 diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.c b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.c index a6cdc38f1..8ed7cf1dc 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.c +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.c @@ -19,8 +19,17 @@ ******************************************************************************/ #include +#include #include "psu_init_gpl.h" +int mask_pollOnValue(u32 add , u32 mask, u32 value ); + +int mask_poll(u32 add , u32 mask ); + +void mask_delay(u32 delay); + +u32 mask_read(u32 add , u32 mask ); + static void PSU_Mask_Write (unsigned long offset, unsigned long mask, unsigned long val) { unsigned long RegVal = 0x0; @@ -30,6 +39,14 @@ static void PSU_Mask_Write (unsigned long offset, unsigned long mask, unsigned l Xil_Out32 (offset, RegVal); } + void prog_reg (unsigned long addr, unsigned long mask, unsigned long shift, unsigned long value) { + int rdata =0; + rdata = Xil_In32(addr); + rdata = rdata & (~mask); + rdata = rdata | (value << shift); + Xil_Out32(addr,rdata); + } + unsigned long psu_pll_init_data() { // : RPLL INIT /*Register : RPLL_CFG @ 0XFF5E0034

@@ -841,99 +858,6 @@ unsigned long psu_pll_init_data() { } unsigned long psu_clock_init_data() { // : CLOCK CONTROL SLCR REGISTER - /*Register : GEM0_REF_CTRL @ 0XFF5E0050

- - Clock active for the RX channel - PSU_CRL_APB_GEM0_REF_CTRL_RX_CLKACT 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_GEM0_REF_CTRL_DIVISOR0 0x8 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM0_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0050, 0x063F3F07U ,0x06010800U) - RegMask = (CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_CLKACT_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT - | 0x00000008U << CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM0_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U); - /*############################################################################################################################ */ - - /*Register : GEM1_REF_CTRL @ 0XFF5E0054

- - Clock active for the RX channel - PSU_CRL_APB_GEM1_REF_CTRL_RX_CLKACT 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM1_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_GEM1_REF_CTRL_DIVISOR0 0x8 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM1_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0054, 0x063F3F07U ,0x06010800U) - RegMask = (CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_CLKACT_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT - | 0x00000008U << CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM1_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U); - /*############################################################################################################################ */ - - /*Register : GEM2_REF_CTRL @ 0XFF5E0058

- - Clock active for the RX channel - PSU_CRL_APB_GEM2_REF_CTRL_RX_CLKACT 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM2_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_GEM2_REF_CTRL_DIVISOR0 0x8 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM2_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0058, 0x063F3F07U ,0x06010800U) - RegMask = (CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_CLKACT_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT - | 0x00000008U << CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM2_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010800U); - /*############################################################################################################################ */ - /*Register : GEM3_REF_CTRL @ 0XFF5E005C

Clock active for the RX channel @@ -965,33 +889,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_GEM3_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010C00U); /*############################################################################################################################ */ - /*Register : GEM_TSU_REF_CTRL @ 0XFF5E0100

- - 6 bit divider - PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0 0x6 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_GEM_TSU_REF_CTRL_SRCSEL 0x2 - - 6 bit divider - PSU_CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1 0x1 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_GEM_TSU_REF_CTRL_CLKACT 0x1 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0100, 0x013F3F07U ,0x01010602U) - RegMask = (CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK | CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK | 0 ); - - RegVal = ((0x00000006U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT - | 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT - | 0x00000001U << CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_GEM_TSU_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010602U); - /*############################################################################################################################ */ - /*Register : USB0_BUS_REF_CTRL @ 0XFF5E0060

Clock active signal. Switch to 0 to disable the clock @@ -1019,33 +916,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_USB0_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010600U); /*############################################################################################################################ */ - /*Register : USB1_BUS_REF_CTRL @ 0XFF5E0064

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_USB1_BUS_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0 0x4 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_USB1_BUS_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0064, 0x023F3F07U ,0x02010400U) - RegMask = (CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT - | 0x00000004U << CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_USB1_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010400U); - /*############################################################################################################################ */ - /*Register : USB3_DUAL_REF_CTRL @ 0XFF5E004C

Clock active signal. Switch to 0 to disable the clock @@ -1100,33 +970,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_QSPI_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010C00U); /*############################################################################################################################ */ - /*Register : SDIO0_REF_CTRL @ 0XFF5E006C

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_SDIO0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_SDIO0_REF_CTRL_DIVISOR0 0x7 - - 000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_SDIO0_REF_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E006C, 0x013F3F07U ,0x01010702U) - RegMask = (CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT - | 0x00000007U << CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_SDIO0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U); - /*############################################################################################################################ */ - /*Register : SDIO1_REF_CTRL @ 0XFF5E0070

Clock active signal. Switch to 0 to disable the clock @@ -1276,87 +1119,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_I2C1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U); /*############################################################################################################################ */ - /*Register : SPI0_REF_CTRL @ 0XFF5E007C

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_SPI0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_SPI0_REF_CTRL_DIVISOR0 0x7 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_SPI0_REF_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E007C, 0x013F3F07U ,0x01010702U) - RegMask = (CRL_APB_SPI0_REF_CTRL_CLKACT_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT - | 0x00000007U << CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_SPI0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U); - /*############################################################################################################################ */ - - /*Register : SPI1_REF_CTRL @ 0XFF5E0080

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_SPI1_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_SPI1_REF_CTRL_DIVISOR0 0x7 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_SPI1_REF_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0080, 0x013F3F07U ,0x01010702U) - RegMask = (CRL_APB_SPI1_REF_CTRL_CLKACT_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK | CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK | CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT - | 0x00000007U << CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_SPI1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010702U); - /*############################################################################################################################ */ - - /*Register : CAN0_REF_CTRL @ 0XFF5E0084

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_CAN0_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_CAN0_REF_CTRL_DIVISOR0 0xa - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_CAN0_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E0084, 0x013F3F07U ,0x01010A00U) - RegMask = (CRL_APB_CAN0_REF_CTRL_CLKACT_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK | CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK | CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT - | 0x0000000AU << CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_CAN0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U); - /*############################################################################################################################ */ - /*Register : CAN1_REF_CTRL @ 0XFF5E0088

Clock active signal. Switch to 0 to disable the clock @@ -1431,29 +1193,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_IOU_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000602U); /*############################################################################################################################ */ - /*Register : CSU_PLL_CTRL @ 0XFF5E00A0

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_CSU_PLL_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_CSU_PLL_CTRL_DIVISOR0 0x3 - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_CSU_PLL_CTRL_SRCSEL 0x2 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E00A0, 0x01003F07U ,0x01000302U) - RegMask = (CRL_APB_CSU_PLL_CTRL_CLKACT_MASK | CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK | CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT - | 0x00000003U << CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT - | 0x00000002U << CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_CSU_PLL_CTRL_OFFSET ,0x01003F07U ,0x01000302U); - /*############################################################################################################################ */ - /*Register : PCAP_CTRL @ 0XFF5E00A4

Clock active signal. Switch to 0 to disable the clock @@ -1546,33 +1285,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRL_APB_DBG_LPD_CTRL_OFFSET ,0x01003F07U ,0x01000602U); /*############################################################################################################################ */ - /*Register : NAND_REF_CTRL @ 0XFF5E00B4

- - Clock active signal. Switch to 0 to disable the clock - PSU_CRL_APB_NAND_REF_CTRL_CLKACT 0x1 - - 6 bit divider - PSU_CRL_APB_NAND_REF_CTRL_DIVISOR1 0x1 - - 6 bit divider - PSU_CRL_APB_NAND_REF_CTRL_DIVISOR0 0xa - - 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.) - PSU_CRL_APB_NAND_REF_CTRL_SRCSEL 0x0 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFF5E00B4, 0x013F3F07U ,0x01010A00U) - RegMask = (CRL_APB_NAND_REF_CTRL_CLKACT_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK | CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK | CRL_APB_NAND_REF_CTRL_SRCSEL_MASK | 0 ); - - RegVal = ((0x00000001U << CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT - | 0x00000001U << CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT - | 0x0000000AU << CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRL_APB_NAND_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010A00U); - /*############################################################################################################################ */ - /*Register : ADMA_REF_CTRL @ 0XFF5E00B8

Clock active signal. Switch to 0 to disable the clock @@ -2112,29 +1824,6 @@ unsigned long psu_clock_init_data() { PSU_Mask_Write (CRF_APB_TOPSW_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000502U); /*############################################################################################################################ */ - /*Register : GTGREF0_REF_CTRL @ 0XFD1A00C8

- - 6 bit divider - PSU_CRF_APB_GTGREF0_REF_CTRL_DIVISOR0 0x4 - - 000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of - he new clock. This is not usually an issue, but designers must be aware.) - PSU_CRF_APB_GTGREF0_REF_CTRL_SRCSEL 0x0 - - Clock active signal. Switch to 0 to disable the clock - PSU_CRF_APB_GTGREF0_REF_CTRL_CLKACT 0x1 - - This register controls this reference clock - (OFFSET, MASK, VALUE) (0XFD1A00C8, 0x01003F07U ,0x01000400U) - RegMask = (CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK | CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK | CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK | 0 ); - - RegVal = ((0x00000004U << CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT - | 0x00000000U << CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT - | 0x00000001U << CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (CRF_APB_GTGREF0_REF_CTRL_OFFSET ,0x01003F07U ,0x01000400U); - /*############################################################################################################################ */ - /*Register : DBG_TSTMP_CTRL @ 0XFD1A00F8

6 bit divider @@ -3305,22 +2994,22 @@ unsigned long psu_ddr_init_data() { ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L DDR2/LPDDR3/LPDDR4 devices. - PSU_DDRC_DRAMTMG7_T_CKPDE 0x1 + PSU_DDRC_DRAMTMG7_T_CKPDE 0x6 This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO= , program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti g mDDR or LPDDR2/LPDDR3/LPDDR4 devices. - PSU_DDRC_DRAMTMG7_T_CKPDX 0x1 + PSU_DDRC_DRAMTMG7_T_CKPDX 0x6 SDRAM Timing Register 7 - (OFFSET, MASK, VALUE) (0XFD07011C, 0x00000F0FU ,0x00000101U) + (OFFSET, MASK, VALUE) (0XFD07011C, 0x00000F0FU ,0x00000606U) RegMask = (DDRC_DRAMTMG7_T_CKPDE_MASK | DDRC_DRAMTMG7_T_CKPDX_MASK | 0 ); - RegVal = ((0x00000001U << DDRC_DRAMTMG7_T_CKPDE_SHIFT - | 0x00000001U << DDRC_DRAMTMG7_T_CKPDX_SHIFT + RegVal = ((0x00000006U << DDRC_DRAMTMG7_T_CKPDE_SHIFT + | 0x00000006U << DDRC_DRAMTMG7_T_CKPDX_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDRC_DRAMTMG7_OFFSET ,0x00000F0FU ,0x00000101U); + PSU_Mask_Write (DDRC_DRAMTMG7_OFFSET ,0x00000F0FU ,0x00000606U); /*############################################################################################################################ */ /*Register : DRAMTMG8 @ 0XFD070120

@@ -3643,13 +3332,13 @@ unsigned long psu_ddr_init_data() { s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20 8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107 cycles - 0xE - 262144 cycles - 0xF - Unlimited - PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD 0x4 + PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD 0x0 Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled PSU_DDRC_DFILPCFG0_DFI_LP_EN_PD 0x1 DFI Low Power Configuration Register 0 - (OFFSET, MASK, VALUE) (0XFD070198, 0x0FF1F1F1U ,0x07000141U) + (OFFSET, MASK, VALUE) (0XFD070198, 0x0FF1F1F1U ,0x07000101U) RegMask = (DDRC_DFILPCFG0_DFI_TLP_RESP_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK | DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK | 0 ); RegVal = ((0x00000007U << DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT @@ -3657,10 +3346,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT | 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT | 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT - | 0x00000004U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT + | 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT | 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDRC_DFILPCFG0_OFFSET ,0x0FF1F1F1U ,0x07000141U); + PSU_Mask_Write (DDRC_DFILPCFG0_OFFSET ,0x0FF1F1F1U ,0x07000101U); /*############################################################################################################################ */ /*Register : DFILPCFG1 @ 0XFD07019C

@@ -5607,10 +5296,10 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_PGCR2_PLLFSMBYP 0x0 Refresh Period - PSU_DDR_PHY_PGCR2_TREFPRD 0x12302 + PSU_DDR_PHY_PGCR2_TREFPRD 0x10028 PHY General Configuration Register 2 - (OFFSET, MASK, VALUE) (0XFD080018, 0xFFFFFFFFU ,0x00F12302U) + (OFFSET, MASK, VALUE) (0XFD080018, 0xFFFFFFFFU ,0x00F10028U) RegMask = (DDR_PHY_PGCR2_CLRTSTAT_MASK | DDR_PHY_PGCR2_CLRZCAL_MASK | DDR_PHY_PGCR2_CLRPERR_MASK | DDR_PHY_PGCR2_ICPC_MASK | DDR_PHY_PGCR2_DTPMXTMR_MASK | DDR_PHY_PGCR2_INITFSMBYP_MASK | DDR_PHY_PGCR2_PLLFSMBYP_MASK | DDR_PHY_PGCR2_TREFPRD_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_PGCR2_CLRTSTAT_SHIFT @@ -5620,9 +5309,67 @@ unsigned long psu_ddr_init_data() { | 0x0000000FU << DDR_PHY_PGCR2_DTPMXTMR_SHIFT | 0x00000000U << DDR_PHY_PGCR2_INITFSMBYP_SHIFT | 0x00000000U << DDR_PHY_PGCR2_PLLFSMBYP_SHIFT - | 0x00012302U << DDR_PHY_PGCR2_TREFPRD_SHIFT + | 0x00010028U << DDR_PHY_PGCR2_TREFPRD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_PGCR2_OFFSET ,0xFFFFFFFFU ,0x00F10028U); + /*############################################################################################################################ */ + + /*Register : PGCR3 @ 0XFD08001C

+ + CKN Enable + PSU_DDR_PHY_PGCR3_CKNEN 0x55 + + CK Enable + PSU_DDR_PHY_PGCR3_CKEN 0xaa + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_PGCR3_RESERVED_15 0x0 + + Enable Clock Gating for AC [0] ctl_rd_clk + PSU_DDR_PHY_PGCR3_GATEACRDCLK 0x2 + + Enable Clock Gating for AC [0] ddr_clk + PSU_DDR_PHY_PGCR3_GATEACDDRCLK 0x2 + + Enable Clock Gating for AC [0] ctl_clk + PSU_DDR_PHY_PGCR3_GATEACCTLCLK 0x2 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_PGCR3_RESERVED_8 0x0 + + Controls DDL Bypass Modes + PSU_DDR_PHY_PGCR3_DDLBYPMODE 0x2 + + IO Loop-Back Select + PSU_DDR_PHY_PGCR3_IOLB 0x0 + + AC Receive FIFO Read Mode + PSU_DDR_PHY_PGCR3_RDMODE 0x0 + + Read FIFO Reset Disable + PSU_DDR_PHY_PGCR3_DISRST 0x0 + + Clock Level when Clock Gating + PSU_DDR_PHY_PGCR3_CLKLEVEL 0x0 + + PHY General Configuration Register 3 + (OFFSET, MASK, VALUE) (0XFD08001C, 0xFFFFFFFFU ,0x55AA5480U) + RegMask = (DDR_PHY_PGCR3_CKNEN_MASK | DDR_PHY_PGCR3_CKEN_MASK | DDR_PHY_PGCR3_RESERVED_15_MASK | DDR_PHY_PGCR3_GATEACRDCLK_MASK | DDR_PHY_PGCR3_GATEACDDRCLK_MASK | DDR_PHY_PGCR3_GATEACCTLCLK_MASK | DDR_PHY_PGCR3_RESERVED_8_MASK | DDR_PHY_PGCR3_DDLBYPMODE_MASK | DDR_PHY_PGCR3_IOLB_MASK | DDR_PHY_PGCR3_RDMODE_MASK | DDR_PHY_PGCR3_DISRST_MASK | DDR_PHY_PGCR3_CLKLEVEL_MASK | 0 ); + + RegVal = ((0x00000055U << DDR_PHY_PGCR3_CKNEN_SHIFT + | 0x000000AAU << DDR_PHY_PGCR3_CKEN_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_RESERVED_15_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_GATEACRDCLK_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_GATEACDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_GATEACCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_RESERVED_8_SHIFT + | 0x00000002U << DDR_PHY_PGCR3_DDLBYPMODE_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_IOLB_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_RDMODE_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_DISRST_SHIFT + | 0x00000000U << DDR_PHY_PGCR3_CLKLEVEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_PGCR2_OFFSET ,0xFFFFFFFFU ,0x00F12302U); + PSU_Mask_Write (DDR_PHY_PGCR3_OFFSET ,0xFFFFFFFFU ,0x55AA5480U); /*############################################################################################################################ */ /*Register : PGCR5 @ 0XFD080024

@@ -5878,16 +5625,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTPR0_RESERVED_15 0x0 Precharge command period - PSU_DDR_PHY_DTPR0_TRP 0x12 + PSU_DDR_PHY_DTPR0_TRP 0xf Reserved. Return zeroes on reads. PSU_DDR_PHY_DTPR0_RESERVED_7_5 0x0 Internal read to precharge command delay - PSU_DDR_PHY_DTPR0_TRTP 0x8 + PSU_DDR_PHY_DTPR0_TRTP 0x9 DRAM Timing Parameters Register 0 - (OFFSET, MASK, VALUE) (0XFD080110, 0xFFFFFFFFU ,0x06241208U) + (OFFSET, MASK, VALUE) (0XFD080110, 0xFFFFFFFFU ,0x06240F09U) RegMask = (DDR_PHY_DTPR0_RESERVED_31_29_MASK | DDR_PHY_DTPR0_TRRD_MASK | DDR_PHY_DTPR0_RESERVED_23_MASK | DDR_PHY_DTPR0_TRAS_MASK | DDR_PHY_DTPR0_RESERVED_15_MASK | DDR_PHY_DTPR0_TRP_MASK | DDR_PHY_DTPR0_RESERVED_7_5_MASK | DDR_PHY_DTPR0_TRTP_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DTPR0_RESERVED_31_29_SHIFT @@ -5895,11 +5642,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DTPR0_RESERVED_23_SHIFT | 0x00000024U << DDR_PHY_DTPR0_TRAS_SHIFT | 0x00000000U << DDR_PHY_DTPR0_RESERVED_15_SHIFT - | 0x00000012U << DDR_PHY_DTPR0_TRP_SHIFT + | 0x0000000FU << DDR_PHY_DTPR0_TRP_SHIFT | 0x00000000U << DDR_PHY_DTPR0_RESERVED_7_5_SHIFT - | 0x00000008U << DDR_PHY_DTPR0_TRTP_SHIFT + | 0x00000009U << DDR_PHY_DTPR0_TRTP_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DTPR0_OFFSET ,0xFFFFFFFFU ,0x06241208U); + PSU_Mask_Write (DDR_PHY_DTPR0_OFFSET ,0xFFFFFFFFU ,0x06240F09U); /*############################################################################################################################ */ /*Register : DTPR1 @ 0XFD080114

@@ -6007,10 +5754,10 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTPR3_RESERVED_7_3 0x0 DQS output access time from CK/CK# (LPDDR2/3 only) - PSU_DDR_PHY_DTPR3_TDQSCK 0x4 + PSU_DDR_PHY_DTPR3_TDQSCK 0x0 DRAM Timing Parameters Register 3 - (OFFSET, MASK, VALUE) (0XFD08011C, 0xFFFFFFFFU ,0x83000804U) + (OFFSET, MASK, VALUE) (0XFD08011C, 0xFFFFFFFFU ,0x83000800U) RegMask = (DDR_PHY_DTPR3_TOFDX_MASK | DDR_PHY_DTPR3_TCCD_MASK | DDR_PHY_DTPR3_TDLLK_MASK | DDR_PHY_DTPR3_RESERVED_15_12_MASK | DDR_PHY_DTPR3_TDQSCKMAX_MASK | DDR_PHY_DTPR3_RESERVED_7_3_MASK | DDR_PHY_DTPR3_TDQSCK_MASK | 0 ); RegVal = ((0x00000004U << DDR_PHY_DTPR3_TOFDX_SHIFT @@ -6019,9 +5766,9 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DTPR3_RESERVED_15_12_SHIFT | 0x00000008U << DDR_PHY_DTPR3_TDQSCKMAX_SHIFT | 0x00000000U << DDR_PHY_DTPR3_RESERVED_7_3_SHIFT - | 0x00000004U << DDR_PHY_DTPR3_TDQSCK_SHIFT + | 0x00000000U << DDR_PHY_DTPR3_TDQSCK_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DTPR3_OFFSET ,0xFFFFFFFFU ,0x83000804U); + PSU_Mask_Write (DDR_PHY_DTPR3_OFFSET ,0xFFFFFFFFU ,0x83000800U); /*############################################################################################################################ */ /*Register : DTPR4 @ 0XFD080120

@@ -6270,6 +6017,50 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_RDIMMGCR1_OFFSET ,0xFFFFFFFFU ,0x00000C80U); /*############################################################################################################################ */ + /*Register : RDIMMCR0 @ 0XFD080150

+ + DDR4/DDR3 Control Word 7 + PSU_DDR_PHY_RDIMMCR0_RC7 0x0 + + DDR4 Control Word 6 (Comman space Control Word) / DDR3 Reserved + PSU_DDR_PHY_RDIMMCR0_RC6 0x0 + + DDR4/DDR3 Control Word 5 (CK Driver Characteristics Control Word) + PSU_DDR_PHY_RDIMMCR0_RC5 0x0 + + DDR4 Control Word 4 (ODT and CKE Signals Driver Characteristics Control Word) / DDR3 Control Word 4 (Control Signals Driver C + aracteristics Control Word) + PSU_DDR_PHY_RDIMMCR0_RC4 0x0 + + DDR4 Control Word 3 (CA and CS Signals Driver Characteristics Control Word) / DDR3 Control Word 3 (Command/Address Signals Dr + ver Characteristrics Control Word) + PSU_DDR_PHY_RDIMMCR0_RC3 0x0 + + DDR4 Control Word 2 (Timing and IBT Control Word) / DDR3 Control Word 2 (Timing Control Word) + PSU_DDR_PHY_RDIMMCR0_RC2 0x0 + + DDR4/DDR3 Control Word 1 (Clock Driver Enable Control Word) + PSU_DDR_PHY_RDIMMCR0_RC1 0x0 + + DDR4/DDR3 Control Word 0 (Global Features Control Word) + PSU_DDR_PHY_RDIMMCR0_RC0 0x0 + + RDIMM Control Register 0 + (OFFSET, MASK, VALUE) (0XFD080150, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_RDIMMCR0_RC7_MASK | DDR_PHY_RDIMMCR0_RC6_MASK | DDR_PHY_RDIMMCR0_RC5_MASK | DDR_PHY_RDIMMCR0_RC4_MASK | DDR_PHY_RDIMMCR0_RC3_MASK | DDR_PHY_RDIMMCR0_RC2_MASK | DDR_PHY_RDIMMCR0_RC1_MASK | DDR_PHY_RDIMMCR0_RC0_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_RDIMMCR0_RC7_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC6_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC5_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC4_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC3_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC2_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC1_SHIFT + | 0x00000000U << DDR_PHY_RDIMMCR0_RC0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_RDIMMCR0_OFFSET ,0xFFFFFFFFU ,0x00000000U); + /*############################################################################################################################ */ + /*Register : RDIMMCR1 @ 0XFD080154

Control Word 15 @@ -6767,7 +6558,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTCR0_RESERVED_27_26 0x0 Data Training Debug Rank Select - PSU_DDR_PHY_DTCR0_DTDRS 0x1 + PSU_DDR_PHY_DTCR0_DTDRS 0x0 Data Training with Early/Extended Gate PSU_DDR_PHY_DTCR0_DTEXG 0x0 @@ -6785,7 +6576,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTCR0_DTDBS 0x0 Data Training read DBI deskewing configuration - PSU_DDR_PHY_DTCR0_DTRDBITR 0x0 + PSU_DDR_PHY_DTCR0_DTRDBITR 0x2 Reserved. Return zeroes on reads. PSU_DDR_PHY_DTCR0_RESERVED_13 0x0 @@ -6809,18 +6600,18 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DTCR0_DTRPTN 0x7 Data Training Configuration Register 0 - (OFFSET, MASK, VALUE) (0XFD080200, 0xFFFFFFFFU ,0x810011C7U) + (OFFSET, MASK, VALUE) (0XFD080200, 0xFFFFFFFFU ,0x800091C7U) RegMask = (DDR_PHY_DTCR0_RFSHDT_MASK | DDR_PHY_DTCR0_RESERVED_27_26_MASK | DDR_PHY_DTCR0_DTDRS_MASK | DDR_PHY_DTCR0_DTEXG_MASK | DDR_PHY_DTCR0_DTEXD_MASK | DDR_PHY_DTCR0_DTDSTP_MASK | DDR_PHY_DTCR0_DTDEN_MASK | DDR_PHY_DTCR0_DTDBS_MASK | DDR_PHY_DTCR0_DTRDBITR_MASK | DDR_PHY_DTCR0_RESERVED_13_MASK | DDR_PHY_DTCR0_DTWBDDM_MASK | DDR_PHY_DTCR0_RFSHEN_MASK | DDR_PHY_DTCR0_DTCMPD_MASK | DDR_PHY_DTCR0_DTMPR_MASK | DDR_PHY_DTCR0_RESERVED_5_4_MASK | DDR_PHY_DTCR0_DTRPTN_MASK | 0 ); RegVal = ((0x00000008U << DDR_PHY_DTCR0_RFSHDT_SHIFT | 0x00000000U << DDR_PHY_DTCR0_RESERVED_27_26_SHIFT - | 0x00000001U << DDR_PHY_DTCR0_DTDRS_SHIFT + | 0x00000000U << DDR_PHY_DTCR0_DTDRS_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTEXG_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTEXD_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTDSTP_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTDEN_SHIFT | 0x00000000U << DDR_PHY_DTCR0_DTDBS_SHIFT - | 0x00000000U << DDR_PHY_DTCR0_DTRDBITR_SHIFT + | 0x00000002U << DDR_PHY_DTCR0_DTRDBITR_SHIFT | 0x00000000U << DDR_PHY_DTCR0_RESERVED_13_SHIFT | 0x00000001U << DDR_PHY_DTCR0_DTWBDDM_SHIFT | 0x00000001U << DDR_PHY_DTCR0_RFSHEN_SHIFT @@ -6829,7 +6620,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DTCR0_RESERVED_5_4_SHIFT | 0x00000007U << DDR_PHY_DTCR0_DTRPTN_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DTCR0_OFFSET ,0xFFFFFFFFU ,0x810011C7U); + PSU_Mask_Write (DDR_PHY_DTCR0_OFFSET ,0xFFFFFFFFU ,0x800091C7U); /*############################################################################################################################ */ /*Register : DTCR1 @ 0XFD080204

@@ -6925,6 +6716,20 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_CATR0_OFFSET ,0xFFFFFFFFU ,0x00141054U); /*############################################################################################################################ */ + /*Register : BISTLSR @ 0XFD080414

+ + LFSR seed for pseudo-random BIST patterns + PSU_DDR_PHY_BISTLSR_SEED 0x12341000 + + BIST LFSR Seed Register + (OFFSET, MASK, VALUE) (0XFD080414, 0xFFFFFFFFU ,0x12341000U) + RegMask = (DDR_PHY_BISTLSR_SEED_MASK | 0 ); + + RegVal = ((0x12341000U << DDR_PHY_BISTLSR_SEED_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_BISTLSR_OFFSET ,0xFFFFFFFFU ,0x12341000U); + /*############################################################################################################################ */ + /*Register : RIOCR5 @ 0XFD0804F4

Reserved. Return zeroes on reads. @@ -7250,13 +7055,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_VTCR1_SHREN 0x1 Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training - PSU_DDR_PHY_VTCR1_TVREFIO 0x4 + PSU_DDR_PHY_VTCR1_TVREFIO 0x7 Eye LCDL Offset value for VREF training - PSU_DDR_PHY_VTCR1_EOFF 0x1 + PSU_DDR_PHY_VTCR1_EOFF 0x0 Number of LCDL Eye points for which VREF training is repeated - PSU_DDR_PHY_VTCR1_ENUM 0x1 + PSU_DDR_PHY_VTCR1_ENUM 0x0 HOST (IO) internal VREF training Enable PSU_DDR_PHY_VTCR1_HVEN 0x1 @@ -7265,7 +7070,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_VTCR1_HVIO 0x1 VREF Training Control Register 1 - (OFFSET, MASK, VALUE) (0XFD08052C, 0xFFFFFFFFU ,0x07F0018FU) + (OFFSET, MASK, VALUE) (0XFD08052C, 0xFFFFFFFFU ,0x07F001E3U) RegMask = (DDR_PHY_VTCR1_HVSS_MASK | DDR_PHY_VTCR1_RESERVED_27_MASK | DDR_PHY_VTCR1_HVMAX_MASK | DDR_PHY_VTCR1_RESERVED_19_MASK | DDR_PHY_VTCR1_HVMIN_MASK | DDR_PHY_VTCR1_RESERVED_11_MASK | DDR_PHY_VTCR1_SHRNK_MASK | DDR_PHY_VTCR1_SHREN_MASK | DDR_PHY_VTCR1_TVREFIO_MASK | DDR_PHY_VTCR1_EOFF_MASK | DDR_PHY_VTCR1_ENUM_MASK | DDR_PHY_VTCR1_HVEN_MASK | DDR_PHY_VTCR1_HVIO_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_VTCR1_HVSS_SHIFT @@ -7276,69 +7081,153 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_VTCR1_RESERVED_11_SHIFT | 0x00000000U << DDR_PHY_VTCR1_SHRNK_SHIFT | 0x00000001U << DDR_PHY_VTCR1_SHREN_SHIFT - | 0x00000004U << DDR_PHY_VTCR1_TVREFIO_SHIFT - | 0x00000001U << DDR_PHY_VTCR1_EOFF_SHIFT - | 0x00000001U << DDR_PHY_VTCR1_ENUM_SHIFT + | 0x00000007U << DDR_PHY_VTCR1_TVREFIO_SHIFT + | 0x00000000U << DDR_PHY_VTCR1_EOFF_SHIFT + | 0x00000000U << DDR_PHY_VTCR1_ENUM_SHIFT | 0x00000001U << DDR_PHY_VTCR1_HVEN_SHIFT | 0x00000001U << DDR_PHY_VTCR1_HVIO_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_VTCR1_OFFSET ,0xFFFFFFFFU ,0x07F0018FU); + PSU_Mask_Write (DDR_PHY_VTCR1_OFFSET ,0xFFFFFFFFU ,0x07F001E3U); /*############################################################################################################################ */ - /*Register : ACBDLR6 @ 0XFD080558

+ /*Register : ACBDLR1 @ 0XFD080544

Reserved. Return zeroes on reads. - PSU_DDR_PHY_ACBDLR6_RESERVED_31_30 0x0 + PSU_DDR_PHY_ACBDLR1_RESERVED_31_30 0x0 - Delay select for the BDL on Address A[3]. - PSU_DDR_PHY_ACBDLR6_A03BD 0x0 + Delay select for the BDL on Parity. + PSU_DDR_PHY_ACBDLR1_PARBD 0x0 Reserved. Return zeroes on reads. - PSU_DDR_PHY_ACBDLR6_RESERVED_23_22 0x0 + PSU_DDR_PHY_ACBDLR1_RESERVED_23_22 0x0 - Delay select for the BDL on Address A[2]. - PSU_DDR_PHY_ACBDLR6_A02BD 0x0 + Delay select for the BDL on Address A[16]. In DDR3 mode this pin is connected to WE. + PSU_DDR_PHY_ACBDLR1_A16BD 0x0 Reserved. Return zeroes on reads. - PSU_DDR_PHY_ACBDLR6_RESERVED_15_14 0x0 + PSU_DDR_PHY_ACBDLR1_RESERVED_15_14 0x0 - Delay select for the BDL on Address A[1]. - PSU_DDR_PHY_ACBDLR6_A01BD 0x0 + Delay select for the BDL on Address A[17]. When not in DDR4 modemode this pin is connected to CAS. + PSU_DDR_PHY_ACBDLR1_A17BD 0x0 Reserved. Return zeroes on reads. - PSU_DDR_PHY_ACBDLR6_RESERVED_7_6 0x0 + PSU_DDR_PHY_ACBDLR1_RESERVED_7_6 0x0 - Delay select for the BDL on Address A[0]. - PSU_DDR_PHY_ACBDLR6_A00BD 0x0 + Delay select for the BDL on ACTN. + PSU_DDR_PHY_ACBDLR1_ACTBD 0x0 - AC Bit Delay Line Register 6 - (OFFSET, MASK, VALUE) (0XFD080558, 0xFFFFFFFFU ,0x00000000U) - RegMask = (DDR_PHY_ACBDLR6_RESERVED_31_30_MASK | DDR_PHY_ACBDLR6_A03BD_MASK | DDR_PHY_ACBDLR6_RESERVED_23_22_MASK | DDR_PHY_ACBDLR6_A02BD_MASK | DDR_PHY_ACBDLR6_RESERVED_15_14_MASK | DDR_PHY_ACBDLR6_A01BD_MASK | DDR_PHY_ACBDLR6_RESERVED_7_6_MASK | DDR_PHY_ACBDLR6_A00BD_MASK | 0 ); + AC Bit Delay Line Register 1 + (OFFSET, MASK, VALUE) (0XFD080544, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_ACBDLR1_RESERVED_31_30_MASK | DDR_PHY_ACBDLR1_PARBD_MASK | DDR_PHY_ACBDLR1_RESERVED_23_22_MASK | DDR_PHY_ACBDLR1_A16BD_MASK | DDR_PHY_ACBDLR1_RESERVED_15_14_MASK | DDR_PHY_ACBDLR1_A17BD_MASK | DDR_PHY_ACBDLR1_RESERVED_7_6_MASK | DDR_PHY_ACBDLR1_ACTBD_MASK | 0 ); - RegVal = ((0x00000000U << DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT - | 0x00000000U << DDR_PHY_ACBDLR6_A03BD_SHIFT - | 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT - | 0x00000000U << DDR_PHY_ACBDLR6_A02BD_SHIFT - | 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT - | 0x00000000U << DDR_PHY_ACBDLR6_A01BD_SHIFT - | 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT - | 0x00000000U << DDR_PHY_ACBDLR6_A00BD_SHIFT + RegVal = ((0x00000000U << DDR_PHY_ACBDLR1_RESERVED_31_30_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_PARBD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_23_22_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_A16BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_15_14_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_A17BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_7_6_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR1_ACTBD_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_ACBDLR6_OFFSET ,0xFFFFFFFFU ,0x00000000U); + PSU_Mask_Write (DDR_PHY_ACBDLR1_OFFSET ,0xFFFFFFFFU ,0x00000000U); /*############################################################################################################################ */ - /*Register : ACBDLR7 @ 0XFD08055C

+ /*Register : ACBDLR2 @ 0XFD080548

Reserved. Return zeroes on reads. - PSU_DDR_PHY_ACBDLR7_RESERVED_31_30 0x0 + PSU_DDR_PHY_ACBDLR2_RESERVED_31_30 0x0 - Delay select for the BDL on Address A[7]. - PSU_DDR_PHY_ACBDLR7_A07BD 0x0 + Delay select for the BDL on BG[1]. + PSU_DDR_PHY_ACBDLR2_BG1BD 0x0 Reserved. Return zeroes on reads. - PSU_DDR_PHY_ACBDLR7_RESERVED_23_22 0x0 + PSU_DDR_PHY_ACBDLR2_RESERVED_23_22 0x0 - Delay select for the BDL on Address A[6]. + Delay select for the BDL on BG[0]. + PSU_DDR_PHY_ACBDLR2_BG0BD 0x0 + + Reser.ved Return zeroes on reads. + PSU_DDR_PHY_ACBDLR2_RESERVED_15_14 0x0 + + Delay select for the BDL on BA[1]. + PSU_DDR_PHY_ACBDLR2_BA1BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR2_RESERVED_7_6 0x0 + + Delay select for the BDL on BA[0]. + PSU_DDR_PHY_ACBDLR2_BA0BD 0x0 + + AC Bit Delay Line Register 2 + (OFFSET, MASK, VALUE) (0XFD080548, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_ACBDLR2_RESERVED_31_30_MASK | DDR_PHY_ACBDLR2_BG1BD_MASK | DDR_PHY_ACBDLR2_RESERVED_23_22_MASK | DDR_PHY_ACBDLR2_BG0BD_MASK | DDR_PHY_ACBDLR2_RESERVED_15_14_MASK | DDR_PHY_ACBDLR2_BA1BD_MASK | DDR_PHY_ACBDLR2_RESERVED_7_6_MASK | DDR_PHY_ACBDLR2_BA0BD_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_ACBDLR2_RESERVED_31_30_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BG1BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_23_22_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BG0BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_15_14_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BA1BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_7_6_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR2_BA0BD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_ACBDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ACBDLR6 @ 0XFD080558

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR6_RESERVED_31_30 0x0 + + Delay select for the BDL on Address A[3]. + PSU_DDR_PHY_ACBDLR6_A03BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR6_RESERVED_23_22 0x0 + + Delay select for the BDL on Address A[2]. + PSU_DDR_PHY_ACBDLR6_A02BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR6_RESERVED_15_14 0x0 + + Delay select for the BDL on Address A[1]. + PSU_DDR_PHY_ACBDLR6_A01BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR6_RESERVED_7_6 0x0 + + Delay select for the BDL on Address A[0]. + PSU_DDR_PHY_ACBDLR6_A00BD 0x0 + + AC Bit Delay Line Register 6 + (OFFSET, MASK, VALUE) (0XFD080558, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_ACBDLR6_RESERVED_31_30_MASK | DDR_PHY_ACBDLR6_A03BD_MASK | DDR_PHY_ACBDLR6_RESERVED_23_22_MASK | DDR_PHY_ACBDLR6_A02BD_MASK | DDR_PHY_ACBDLR6_RESERVED_15_14_MASK | DDR_PHY_ACBDLR6_A01BD_MASK | DDR_PHY_ACBDLR6_RESERVED_7_6_MASK | DDR_PHY_ACBDLR6_A00BD_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR6_A03BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR6_A02BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR6_A01BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR6_A00BD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_ACBDLR6_OFFSET ,0xFFFFFFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ACBDLR7 @ 0XFD08055C

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR7_RESERVED_31_30 0x0 + + Delay select for the BDL on Address A[7]. + PSU_DDR_PHY_ACBDLR7_A07BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR7_RESERVED_23_22 0x0 + + Delay select for the BDL on Address A[6]. PSU_DDR_PHY_ACBDLR7_A06BD 0x0 Reserved. Return zeroes on reads. @@ -7411,6 +7300,48 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_ACBDLR8_OFFSET ,0xFFFFFFFFU ,0x00000000U); /*############################################################################################################################ */ + /*Register : ACBDLR9 @ 0XFD080564

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR9_RESERVED_31_30 0x0 + + Delay select for the BDL on Address A[15]. + PSU_DDR_PHY_ACBDLR9_A15BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR9_RESERVED_23_22 0x0 + + Delay select for the BDL on Address A[14]. + PSU_DDR_PHY_ACBDLR9_A14BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR9_RESERVED_15_14 0x0 + + Delay select for the BDL on Address A[13]. + PSU_DDR_PHY_ACBDLR9_A13BD 0x0 + + Reserved. Return zeroes on reads. + PSU_DDR_PHY_ACBDLR9_RESERVED_7_6 0x0 + + Delay select for the BDL on Address A[12]. + PSU_DDR_PHY_ACBDLR9_A12BD 0x0 + + AC Bit Delay Line Register 9 + (OFFSET, MASK, VALUE) (0XFD080564, 0xFFFFFFFFU ,0x00000000U) + RegMask = (DDR_PHY_ACBDLR9_RESERVED_31_30_MASK | DDR_PHY_ACBDLR9_A15BD_MASK | DDR_PHY_ACBDLR9_RESERVED_23_22_MASK | DDR_PHY_ACBDLR9_A14BD_MASK | DDR_PHY_ACBDLR9_RESERVED_15_14_MASK | DDR_PHY_ACBDLR9_A13BD_MASK | DDR_PHY_ACBDLR9_RESERVED_7_6_MASK | DDR_PHY_ACBDLR9_A12BD_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_ACBDLR9_RESERVED_31_30_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A15BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_23_22_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A14BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_15_14_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A13BD_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_7_6_SHIFT + | 0x00000000U << DDR_PHY_ACBDLR9_A12BD_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_ACBDLR9_OFFSET ,0xFFFFFFFFU ,0x00000000U); + /*############################################################################################################################ */ + /*Register : ZQCR @ 0XFD080680

Reserved. Return zeroes on reads. @@ -7803,16 +7734,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX0GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX0GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX0GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX0GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX0GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX0GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080714, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080714, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX0GCR5_RESERVED_31_MASK | DDR_PHY_DX0GCR5_DXREFISELR3_MASK | DDR_PHY_DX0GCR5_RESERVED_23_MASK | DDR_PHY_DX0GCR5_DXREFISELR2_MASK | DDR_PHY_DX0GCR5_RESERVED_15_MASK | DDR_PHY_DX0GCR5_DXREFISELR1_MASK | DDR_PHY_DX0GCR5_RESERVED_7_MASK | DDR_PHY_DX0GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX0GCR5_RESERVED_31_SHIFT @@ -7820,11 +7751,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX0GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX0GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX0GCR6 @ 0XFD080718

@@ -8091,16 +8022,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX1GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX1GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX1GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX1GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX1GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX1GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080814, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080814, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX1GCR5_RESERVED_31_MASK | DDR_PHY_DX1GCR5_DXREFISELR3_MASK | DDR_PHY_DX1GCR5_RESERVED_23_MASK | DDR_PHY_DX1GCR5_DXREFISELR2_MASK | DDR_PHY_DX1GCR5_RESERVED_15_MASK | DDR_PHY_DX1GCR5_DXREFISELR1_MASK | DDR_PHY_DX1GCR5_RESERVED_7_MASK | DDR_PHY_DX1GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX1GCR5_RESERVED_31_SHIFT @@ -8108,11 +8039,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX1GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX1GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX1GCR6 @ 0XFD080818

@@ -8429,16 +8360,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX2GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX2GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX2GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX2GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX2GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX2GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080914, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080914, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX2GCR5_RESERVED_31_MASK | DDR_PHY_DX2GCR5_DXREFISELR3_MASK | DDR_PHY_DX2GCR5_RESERVED_23_MASK | DDR_PHY_DX2GCR5_DXREFISELR2_MASK | DDR_PHY_DX2GCR5_RESERVED_15_MASK | DDR_PHY_DX2GCR5_DXREFISELR1_MASK | DDR_PHY_DX2GCR5_RESERVED_7_MASK | DDR_PHY_DX2GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX2GCR5_RESERVED_31_SHIFT @@ -8446,11 +8377,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX2GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX2GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX2GCR6 @ 0XFD080918

@@ -8767,16 +8698,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX3GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX3GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX3GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX3GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX3GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX3GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080A14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080A14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX3GCR5_RESERVED_31_MASK | DDR_PHY_DX3GCR5_DXREFISELR3_MASK | DDR_PHY_DX3GCR5_RESERVED_23_MASK | DDR_PHY_DX3GCR5_DXREFISELR2_MASK | DDR_PHY_DX3GCR5_RESERVED_15_MASK | DDR_PHY_DX3GCR5_DXREFISELR1_MASK | DDR_PHY_DX3GCR5_RESERVED_7_MASK | DDR_PHY_DX3GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX3GCR5_RESERVED_31_SHIFT @@ -8784,11 +8715,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX3GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX3GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX3GCR6 @ 0XFD080A18

@@ -9105,16 +9036,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX4GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX4GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX4GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX4GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX4GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX4GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080B14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080B14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX4GCR5_RESERVED_31_MASK | DDR_PHY_DX4GCR5_DXREFISELR3_MASK | DDR_PHY_DX4GCR5_RESERVED_23_MASK | DDR_PHY_DX4GCR5_DXREFISELR2_MASK | DDR_PHY_DX4GCR5_RESERVED_15_MASK | DDR_PHY_DX4GCR5_DXREFISELR1_MASK | DDR_PHY_DX4GCR5_RESERVED_7_MASK | DDR_PHY_DX4GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX4GCR5_RESERVED_31_SHIFT @@ -9122,11 +9053,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX4GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX4GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX4GCR6 @ 0XFD080B18

@@ -9443,16 +9374,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX5GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX5GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX5GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX5GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX5GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX5GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080C14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080C14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX5GCR5_RESERVED_31_MASK | DDR_PHY_DX5GCR5_DXREFISELR3_MASK | DDR_PHY_DX5GCR5_RESERVED_23_MASK | DDR_PHY_DX5GCR5_DXREFISELR2_MASK | DDR_PHY_DX5GCR5_RESERVED_15_MASK | DDR_PHY_DX5GCR5_DXREFISELR1_MASK | DDR_PHY_DX5GCR5_RESERVED_7_MASK | DDR_PHY_DX5GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX5GCR5_RESERVED_31_SHIFT @@ -9460,11 +9391,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX5GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX5GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX5GCR6 @ 0XFD080C18

@@ -9781,16 +9712,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX6GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX6GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX6GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX6GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX6GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX6GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080D14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080D14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX6GCR5_RESERVED_31_MASK | DDR_PHY_DX6GCR5_DXREFISELR3_MASK | DDR_PHY_DX6GCR5_RESERVED_23_MASK | DDR_PHY_DX6GCR5_DXREFISELR2_MASK | DDR_PHY_DX6GCR5_RESERVED_15_MASK | DDR_PHY_DX6GCR5_DXREFISELR1_MASK | DDR_PHY_DX6GCR5_RESERVED_7_MASK | DDR_PHY_DX6GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX6GCR5_RESERVED_31_SHIFT @@ -9798,11 +9729,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX6GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX6GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX6GCR6 @ 0XFD080D18

@@ -10119,16 +10050,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX7GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX7GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX7GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX7GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX7GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX7GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080E14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080E14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX7GCR5_RESERVED_31_MASK | DDR_PHY_DX7GCR5_DXREFISELR3_MASK | DDR_PHY_DX7GCR5_RESERVED_23_MASK | DDR_PHY_DX7GCR5_DXREFISELR2_MASK | DDR_PHY_DX7GCR5_RESERVED_15_MASK | DDR_PHY_DX7GCR5_DXREFISELR1_MASK | DDR_PHY_DX7GCR5_RESERVED_7_MASK | DDR_PHY_DX7GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX7GCR5_RESERVED_31_SHIFT @@ -10136,11 +10067,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX7GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX7GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX7GCR6 @ 0XFD080E18

@@ -10457,16 +10388,16 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8GCR5_RESERVED_15 0x0 Byte Lane internal VREF Select for Rank 1 - PSU_DDR_PHY_DX8GCR5_DXREFISELR1 0x55 + PSU_DDR_PHY_DX8GCR5_DXREFISELR1 0x4f Reserved. Returns zeros on reads. PSU_DDR_PHY_DX8GCR5_RESERVED_7 0x0 Byte Lane internal VREF Select for Rank 0 - PSU_DDR_PHY_DX8GCR5_DXREFISELR0 0x55 + PSU_DDR_PHY_DX8GCR5_DXREFISELR0 0x4f DATX8 n General Configuration Register 5 - (OFFSET, MASK, VALUE) (0XFD080F14, 0xFFFFFFFFU ,0x09095555U) + (OFFSET, MASK, VALUE) (0XFD080F14, 0xFFFFFFFFU ,0x09094F4FU) RegMask = (DDR_PHY_DX8GCR5_RESERVED_31_MASK | DDR_PHY_DX8GCR5_DXREFISELR3_MASK | DDR_PHY_DX8GCR5_RESERVED_23_MASK | DDR_PHY_DX8GCR5_DXREFISELR2_MASK | DDR_PHY_DX8GCR5_RESERVED_15_MASK | DDR_PHY_DX8GCR5_DXREFISELR1_MASK | DDR_PHY_DX8GCR5_RESERVED_7_MASK | DDR_PHY_DX8GCR5_DXREFISELR0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8GCR5_RESERVED_31_SHIFT @@ -10474,11 +10405,11 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_23_SHIFT | 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT | 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_15_SHIFT - | 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT + | 0x0000004FU << DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT | 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_7_SHIFT - | 0x00000055U << DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT + | 0x0000004FU << DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8GCR5_OFFSET ,0xFFFFFFFFU ,0x09095555U); + PSU_Mask_Write (DDR_PHY_DX8GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU); /*############################################################################################################################ */ /*Register : DX8GCR6 @ 0XFD080F18

@@ -10591,6 +10522,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U); /*############################################################################################################################ */ + /*Register : DX8SL0OSC @ 0XFD081400

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL0OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL0OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL0OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL0OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL0OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL0OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL0OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL0OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL0OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL0OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL0OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL0OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL0OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL0OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL0OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL0OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL0OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL0OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL0OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081400, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL0OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL0OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL0OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL0OSC_LBMODE_MASK | DDR_PHY_DX8SL0OSC_LBGSDQS_MASK | DDR_PHY_DX8SL0OSC_LBGDQS_MASK | DDR_PHY_DX8SL0OSC_LBDQSS_MASK | DDR_PHY_DX8SL0OSC_PHYHRST_MASK | DDR_PHY_DX8SL0OSC_PHYFRST_MASK | DDR_PHY_DX8SL0OSC_DLTST_MASK | DDR_PHY_DX8SL0OSC_DLTMODE_MASK | DDR_PHY_DX8SL0OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL0OSC_OSCWDDL_MASK | DDR_PHY_DX8SL0OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL0OSC_OSCWDL_MASK | DDR_PHY_DX8SL0OSC_OSCDIV_MASK | DDR_PHY_DX8SL0OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL0OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL0OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL0OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL0OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL0OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL0OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL0DQSCTL @ 0XFD08141C

Reserved. Return zeroes on reads. @@ -10630,13 +10647,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL0DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08141C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08141C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL0DQSCTL_DXSR_MASK | DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT @@ -10651,10 +10668,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL0DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL0DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL0DXCTL2 @ 0XFD08142C

@@ -10669,7 +10686,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL0DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_17 0x0 @@ -10708,13 +10725,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD08142C, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD08142C, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL0DXCTL2_IOAG_MASK | DDR_PHY_DX8SL0DXCTL2_IOLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL0DXCTL2_RDBI_MASK | DDR_PHY_DX8SL0DXCTL2_WDBI_MASK | DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL0DXCTL2_DISRST_MASK | DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT @@ -10728,7 +10745,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL0DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL0DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL0IOCR @ 0XFD081430

@@ -10765,6 +10782,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL0IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL1OSC @ 0XFD081440

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL1OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL1OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL1OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL1OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL1OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL1OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL1OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL1OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL1OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL1OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL1OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL1OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL1OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL1OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL1OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL1OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL1OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL1OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL1OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081440, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL1OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL1OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL1OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL1OSC_LBMODE_MASK | DDR_PHY_DX8SL1OSC_LBGSDQS_MASK | DDR_PHY_DX8SL1OSC_LBGDQS_MASK | DDR_PHY_DX8SL1OSC_LBDQSS_MASK | DDR_PHY_DX8SL1OSC_PHYHRST_MASK | DDR_PHY_DX8SL1OSC_PHYFRST_MASK | DDR_PHY_DX8SL1OSC_DLTST_MASK | DDR_PHY_DX8SL1OSC_DLTMODE_MASK | DDR_PHY_DX8SL1OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL1OSC_OSCWDDL_MASK | DDR_PHY_DX8SL1OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL1OSC_OSCWDL_MASK | DDR_PHY_DX8SL1OSC_OSCDIV_MASK | DDR_PHY_DX8SL1OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL1OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL1OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL1OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL1OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL1OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL1OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL1DQSCTL @ 0XFD08145C

Reserved. Return zeroes on reads. @@ -10804,13 +10907,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL1DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08145C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08145C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL1DQSCTL_DXSR_MASK | DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT @@ -10825,10 +10928,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL1DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL1DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL1DXCTL2 @ 0XFD08146C

@@ -10843,7 +10946,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL1DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_17 0x0 @@ -10882,13 +10985,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD08146C, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD08146C, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL1DXCTL2_IOAG_MASK | DDR_PHY_DX8SL1DXCTL2_IOLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL1DXCTL2_RDBI_MASK | DDR_PHY_DX8SL1DXCTL2_WDBI_MASK | DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL1DXCTL2_DISRST_MASK | DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT @@ -10902,7 +11005,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL1DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL1DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL1IOCR @ 0XFD081470

@@ -10939,6 +11042,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL1IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL2OSC @ 0XFD081480

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL2OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL2OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL2OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL2OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL2OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL2OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL2OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL2OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL2OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL2OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL2OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL2OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL2OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL2OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL2OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL2OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL2OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL2OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL2OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081480, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL2OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL2OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL2OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL2OSC_LBMODE_MASK | DDR_PHY_DX8SL2OSC_LBGSDQS_MASK | DDR_PHY_DX8SL2OSC_LBGDQS_MASK | DDR_PHY_DX8SL2OSC_LBDQSS_MASK | DDR_PHY_DX8SL2OSC_PHYHRST_MASK | DDR_PHY_DX8SL2OSC_PHYFRST_MASK | DDR_PHY_DX8SL2OSC_DLTST_MASK | DDR_PHY_DX8SL2OSC_DLTMODE_MASK | DDR_PHY_DX8SL2OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL2OSC_OSCWDDL_MASK | DDR_PHY_DX8SL2OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL2OSC_OSCWDL_MASK | DDR_PHY_DX8SL2OSC_OSCDIV_MASK | DDR_PHY_DX8SL2OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL2OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL2OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL2OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL2OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL2OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL2OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL2DQSCTL @ 0XFD08149C

Reserved. Return zeroes on reads. @@ -10978,13 +11167,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL2DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08149C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08149C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL2DQSCTL_DXSR_MASK | DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT @@ -10999,10 +11188,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL2DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL2DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL2DXCTL2 @ 0XFD0814AC

@@ -11017,7 +11206,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL2DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_17 0x0 @@ -11056,13 +11245,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD0814AC, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD0814AC, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL2DXCTL2_IOAG_MASK | DDR_PHY_DX8SL2DXCTL2_IOLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL2DXCTL2_RDBI_MASK | DDR_PHY_DX8SL2DXCTL2_WDBI_MASK | DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL2DXCTL2_DISRST_MASK | DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT @@ -11076,7 +11265,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL2DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL2DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL2IOCR @ 0XFD0814B0

@@ -11113,6 +11302,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL2IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL3OSC @ 0XFD0814C0

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL3OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL3OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL3OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL3OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL3OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL3OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL3OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL3OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL3OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL3OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL3OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL3OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL3OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL3OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL3OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL3OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL3OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL3OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL3OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD0814C0, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL3OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL3OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL3OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL3OSC_LBMODE_MASK | DDR_PHY_DX8SL3OSC_LBGSDQS_MASK | DDR_PHY_DX8SL3OSC_LBGDQS_MASK | DDR_PHY_DX8SL3OSC_LBDQSS_MASK | DDR_PHY_DX8SL3OSC_PHYHRST_MASK | DDR_PHY_DX8SL3OSC_PHYFRST_MASK | DDR_PHY_DX8SL3OSC_DLTST_MASK | DDR_PHY_DX8SL3OSC_DLTMODE_MASK | DDR_PHY_DX8SL3OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL3OSC_OSCWDDL_MASK | DDR_PHY_DX8SL3OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL3OSC_OSCWDL_MASK | DDR_PHY_DX8SL3OSC_OSCDIV_MASK | DDR_PHY_DX8SL3OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL3OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL3OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL3OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL3OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL3OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL3OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL3DQSCTL @ 0XFD0814DC

Reserved. Return zeroes on reads. @@ -11152,13 +11427,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL3DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD0814DC, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD0814DC, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL3DQSCTL_DXSR_MASK | DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT @@ -11173,10 +11448,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL3DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL3DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL3DXCTL2 @ 0XFD0814EC

@@ -11191,7 +11466,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL3DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_17 0x0 @@ -11230,13 +11505,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD0814EC, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD0814EC, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL3DXCTL2_IOAG_MASK | DDR_PHY_DX8SL3DXCTL2_IOLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL3DXCTL2_RDBI_MASK | DDR_PHY_DX8SL3DXCTL2_WDBI_MASK | DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL3DXCTL2_DISRST_MASK | DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT @@ -11250,7 +11525,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL3DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL3DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL3IOCR @ 0XFD0814F0

@@ -11287,6 +11562,92 @@ unsigned long psu_ddr_init_data() { PSU_Mask_Write (DDR_PHY_DX8SL3IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U); /*############################################################################################################################ */ + /*Register : DX8SL4OSC @ 0XFD081500

+ + Reserved. Return zeroes on reads. + PSU_DDR_PHY_DX8SL4OSC_RESERVED_31_30 0x0 + + Enable Clock Gating for DX ddr_clk + PSU_DDR_PHY_DX8SL4OSC_GATEDXRDCLK 0x2 + + Enable Clock Gating for DX ctl_rd_clk + PSU_DDR_PHY_DX8SL4OSC_GATEDXDDRCLK 0x2 + + Enable Clock Gating for DX ctl_clk + PSU_DDR_PHY_DX8SL4OSC_GATEDXCTLCLK 0x2 + + Selects the level to which clocks will be stalled when clock gating is enabled. + PSU_DDR_PHY_DX8SL4OSC_CLKLEVEL 0x0 + + Loopback Mode + PSU_DDR_PHY_DX8SL4OSC_LBMODE 0x0 + + Load GSDQS LCDL with 2x the calibrated GSDQSPRD value + PSU_DDR_PHY_DX8SL4OSC_LBGSDQS 0x0 + + Loopback DQS Gating + PSU_DDR_PHY_DX8SL4OSC_LBGDQS 0x0 + + Loopback DQS Shift + PSU_DDR_PHY_DX8SL4OSC_LBDQSS 0x0 + + PHY High-Speed Reset + PSU_DDR_PHY_DX8SL4OSC_PHYHRST 0x1 + + PHY FIFO Reset + PSU_DDR_PHY_DX8SL4OSC_PHYFRST 0x1 + + Delay Line Test Start + PSU_DDR_PHY_DX8SL4OSC_DLTST 0x0 + + Delay Line Test Mode + PSU_DDR_PHY_DX8SL4OSC_DLTMODE 0x0 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL4OSC_RESERVED_12_11 0x3 + + Oscillator Mode Write-Data Delay Line Select + PSU_DDR_PHY_DX8SL4OSC_OSCWDDL 0x3 + + Reserved. Caution, do not write to this register field. + PSU_DDR_PHY_DX8SL4OSC_RESERVED_8_7 0x3 + + Oscillator Mode Write-Leveling Delay Line Select + PSU_DDR_PHY_DX8SL4OSC_OSCWDL 0x3 + + Oscillator Mode Division + PSU_DDR_PHY_DX8SL4OSC_OSCDIV 0xf + + Oscillator Enable + PSU_DDR_PHY_DX8SL4OSC_OSCEN 0x0 + + DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register + (OFFSET, MASK, VALUE) (0XFD081500, 0xFFFFFFFFU ,0x2A019FFEU) + RegMask = (DDR_PHY_DX8SL4OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL4OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL4OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL4OSC_LBMODE_MASK | DDR_PHY_DX8SL4OSC_LBGSDQS_MASK | DDR_PHY_DX8SL4OSC_LBGDQS_MASK | DDR_PHY_DX8SL4OSC_LBDQSS_MASK | DDR_PHY_DX8SL4OSC_PHYHRST_MASK | DDR_PHY_DX8SL4OSC_PHYFRST_MASK | DDR_PHY_DX8SL4OSC_DLTST_MASK | DDR_PHY_DX8SL4OSC_DLTMODE_MASK | DDR_PHY_DX8SL4OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL4OSC_OSCWDDL_MASK | DDR_PHY_DX8SL4OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL4OSC_OSCWDL_MASK | DDR_PHY_DX8SL4OSC_OSCDIV_MASK | DDR_PHY_DX8SL4OSC_OSCEN_MASK | 0 ); + + RegVal = ((0x00000000U << DDR_PHY_DX8SL4OSC_RESERVED_31_30_SHIFT + | 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXRDCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_SHIFT + | 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_CLKLEVEL_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBMODE_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBGSDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBGDQS_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_LBDQSS_SHIFT + | 0x00000001U << DDR_PHY_DX8SL4OSC_PHYHRST_SHIFT + | 0x00000001U << DDR_PHY_DX8SL4OSC_PHYFRST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_DLTST_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_DLTMODE_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_RESERVED_12_11_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_OSCWDDL_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_RESERVED_8_7_SHIFT + | 0x00000003U << DDR_PHY_DX8SL4OSC_OSCWDL_SHIFT + | 0x0000000FU << DDR_PHY_DX8SL4OSC_OSCDIV_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4OSC_OSCEN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (DDR_PHY_DX8SL4OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU); + /*############################################################################################################################ */ + /*Register : DX8SL4DQSCTL @ 0XFD08151C

Reserved. Return zeroes on reads. @@ -11326,13 +11687,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL4DQSCTL_DXSR 0x3 DQS_N Resistor - PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES 0xc + PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES 0x0 DQS Resistor - PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES 0x4 + PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES 0x0 DATX8 0-1 DQS Control Register - (OFFSET, MASK, VALUE) (0XFD08151C, 0xFFFFFFFFU ,0x012643C4U) + (OFFSET, MASK, VALUE) (0XFD08151C, 0xFFFFFFFFU ,0x01264300U) RegMask = (DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL4DQSCTL_DXSR_MASK | DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT @@ -11347,10 +11708,10 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT | 0x00000003U << DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT - | 0x0000000CU << DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT - | 0x00000004U << DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT + | 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL4DQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U); + PSU_Mask_Write (DDR_PHY_DX8SL4DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U); /*############################################################################################################################ */ /*Register : DX8SL4DXCTL2 @ 0XFD08152C

@@ -11365,7 +11726,7 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL4DXCTL2_POSOEX 0x0 OE Extension during Pre-amble - PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX 0x0 + PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX 0x1 Reserved. Return zeroes on reads. PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_17 0x0 @@ -11404,13 +11765,13 @@ unsigned long psu_ddr_init_data() { PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_0 0x0 DATX8 0-1 DX Control Register 2 - (OFFSET, MASK, VALUE) (0XFD08152C, 0xFFFFFFFFU ,0x00001800U) + (OFFSET, MASK, VALUE) (0XFD08152C, 0xFFFFFFFFU ,0x00041800U) RegMask = (DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL4DXCTL2_IOAG_MASK | DDR_PHY_DX8SL4DXCTL2_IOLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL4DXCTL2_RDBI_MASK | DDR_PHY_DX8SL4DXCTL2_WDBI_MASK | DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL4DXCTL2_DISRST_MASK | DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK | 0 ); RegVal = ((0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT - | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT + | 0x00000001U << DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT @@ -11424,7 +11785,7 @@ unsigned long psu_ddr_init_data() { | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT | 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (DDR_PHY_DX8SL4DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00001800U); + PSU_Mask_Write (DDR_PHY_DX8SL4DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U); /*############################################################################################################################ */ /*Register : DX8SL4IOCR @ 0XFD081530

@@ -12478,7 +12839,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper) - PSU_IOU_SLCR_MIO_PIN_26_L2_SEL 1 + PSU_IOU_SLCR_MIO_PIN_26_L2_SEL 0 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal @@ -12488,15 +12849,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_26_L3_SEL 0 Configures MIO Pin 26 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180068, 0x000000FEU ,0x00000008U) + (OFFSET, MASK, VALUE) (0XFF180068, 0x000000FEU ,0x00000000U) RegMask = (IOU_SLCR_MIO_PIN_26_L0_SEL_MASK | IOU_SLCR_MIO_PIN_26_L1_SEL_MASK | IOU_SLCR_MIO_PIN_26_L2_SEL_MASK | IOU_SLCR_MIO_PIN_26_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT - | 0x00000001U << IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT + | 0x00000000U << IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_26_OFFSET ,0x000000FEU ,0x00000008U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_26_OFFSET ,0x000000FEU ,0x00000000U); /*############################################################################################################################ */ /*Register : MIO_PIN_27 @ 0XFF18006C

@@ -12510,7 +12871,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp t, dp_aux_data_out- (Dp Aux Data) - PSU_IOU_SLCR_MIO_PIN_27_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_27_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can , Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa @@ -12520,15 +12881,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_27_L3_SEL 0 Configures MIO Pin 27 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF18006C, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF18006C, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_27_L0_SEL_MASK | IOU_SLCR_MIO_PIN_27_L1_SEL_MASK | IOU_SLCR_MIO_PIN_27_L2_SEL_MASK | IOU_SLCR_MIO_PIN_27_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_27_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_27_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_28 @ 0XFF180070

@@ -12541,7 +12902,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug) - PSU_IOU_SLCR_MIO_PIN_28_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_28_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can , Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa @@ -12550,15 +12911,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_28_L3_SEL 0 Configures MIO Pin 28 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180070, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF180070, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_28_L0_SEL_MASK | IOU_SLCR_MIO_PIN_28_L1_SEL_MASK | IOU_SLCR_MIO_PIN_28_L2_SEL_MASK | IOU_SLCR_MIO_PIN_28_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_28_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_28_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_29 @ 0XFF180074

@@ -12572,7 +12933,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp t, dp_aux_data_out- (Dp Aux Data) - PSU_IOU_SLCR_MIO_PIN_29_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_29_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can , Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal @@ -12582,15 +12943,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_29_L3_SEL 0 Configures MIO Pin 29 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180074, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF180074, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_29_L0_SEL_MASK | IOU_SLCR_MIO_PIN_29_L1_SEL_MASK | IOU_SLCR_MIO_PIN_29_L2_SEL_MASK | IOU_SLCR_MIO_PIN_29_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_29_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_29_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_30 @ 0XFF180078

@@ -12603,7 +12964,7 @@ unsigned long psu_mio_init_data() { Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug) - PSU_IOU_SLCR_MIO_PIN_30_L2_SEL 0 + PSU_IOU_SLCR_MIO_PIN_30_L2_SEL 3 Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can , Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal @@ -12613,15 +12974,15 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_PIN_30_L3_SEL 0 Configures MIO Pin 30 peripheral interface mapping - (OFFSET, MASK, VALUE) (0XFF180078, 0x000000FEU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFF180078, 0x000000FEU ,0x00000018U) RegMask = (IOU_SLCR_MIO_PIN_30_L0_SEL_MASK | IOU_SLCR_MIO_PIN_30_L1_SEL_MASK | IOU_SLCR_MIO_PIN_30_L2_SEL_MASK | IOU_SLCR_MIO_PIN_30_L3_SEL_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT - | 0x00000000U << IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT + | 0x00000003U << IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT | 0x00000000U << IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_PIN_30_OFFSET ,0x000000FEU ,0x00000000U); + PSU_Mask_Write (IOU_SLCR_MIO_PIN_30_OFFSET ,0x000000FEU ,0x00000018U); /*############################################################################################################################ */ /*Register : MIO_PIN_31 @ 0XFF18007C

@@ -14152,25 +14513,25 @@ unsigned long psu_mio_init_data() { PSU_IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI 1 Master Tri-state Enable for pin 26, active high - PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI 1 + PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI 0 Master Tri-state Enable for pin 27, active high PSU_IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI 0 Master Tri-state Enable for pin 28, active high - PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI 0 + PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI 1 Master Tri-state Enable for pin 29, active high PSU_IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI 0 Master Tri-state Enable for pin 30, active high - PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI 0 + PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI 1 Master Tri-state Enable for pin 31, active high PSU_IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI 0 MIO pin Tri-state Enables, 31:0 - (OFFSET, MASK, VALUE) (0XFF180204, 0xFFFFFFFFU ,0x06240000U) + (OFFSET, MASK, VALUE) (0XFF180204, 0xFFFFFFFFU ,0x52240000U) RegMask = (IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK | 0 ); RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT @@ -14199,14 +14560,14 @@ unsigned long psu_mio_init_data() { | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT - | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT + | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT - | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT + | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT - | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT + | 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT | 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI0_OFFSET ,0xFFFFFFFFU ,0x06240000U); + PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI0_OFFSET ,0xFFFFFFFFU ,0x52240000U); /*############################################################################################################################ */ /*Register : MIO_MST_TRI1 @ 0XFF180208

@@ -16501,6 +16862,21 @@ unsigned long psu_mio_init_data() { } unsigned long psu_peripherals_init_data() { // : RESET BLOCKS + // : TIMESTAMP + /*Register : RST_LPD_IOU2 @ 0XFF5E0238

+ + Block level reset + PSU_CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET 0 + + Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset. + (OFFSET, MASK, VALUE) (0XFF5E0238, 0x00100000U ,0x00000000U) + RegMask = (CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_MASK | 0 ); + + RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00100000U ,0x00000000U); + /*############################################################################################################################ */ + // : ENET /*Register : RST_LPD_IOU0 @ 0XFF5E0230

@@ -16531,6 +16907,21 @@ unsigned long psu_peripherals_init_data() { PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000001U ,0x00000000U); /*############################################################################################################################ */ + // : QSPI TAP DELAY + /*Register : IOU_TAPDLY_BYPASS @ 0XFF180390

+ + 0: Do not by pass the tap delays on the Rx clock signal of LQSPI 1: Bypass the Tap delay on the Rx clock signal of LQSPI + PSU_IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX 1 + + IOU tap delay bypass for the LQSPI and NAND controllers + (OFFSET, MASK, VALUE) (0XFF180390, 0x00000004U ,0x00000004U) + RegMask = (IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_MASK | 0 ); + + RegVal = ((0x00000001U << IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SLCR_IOU_TAPDLY_BYPASS_OFFSET ,0x00000004U ,0x00000004U); + /*############################################################################################################################ */ + // : NAND // : USB /*Register : RST_LPD_TOP @ 0XFF5E023C

@@ -16681,6 +17072,23 @@ unsigned long psu_peripherals_init_data() { PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG1_OFFSET ,0x7F800000U ,0x63800000U); /*############################################################################################################################ */ + // : SD1 RETUNER + /*Register : SD_CONFIG_REG3 @ 0XFF180324

+ + This is the Timer Count for Re-Tuning Timer for Re-Tuning Mode 1 to 3. Setting to 4'b0 disables Re-Tuning Timer. 0h - Get inf + rmation via other source 1h = 1 seconds 2h = 2 seconds 3h = 4 seconds 4h = 8 seconds -- n = 2(n-1) seconds -- Bh = 1024 secon + s Fh - Ch = Reserved + PSU_IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR 0X0 + + SD Config Register 3 + (OFFSET, MASK, VALUE) (0XFF180324, 0x03C00000U ,0x00000000U) + RegMask = (IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_MASK | 0 ); + + RegVal = ((0x00000000U << IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG3_OFFSET ,0x03C00000U ,0x00000000U); + /*############################################################################################################################ */ + // : CAN /*Register : RST_LPD_IOU2 @ 0XFF5E0238

@@ -17121,6 +17529,37 @@ unsigned long psu_peripherals_init_data() { PSU_Mask_Write (RTC_CONTROL_OFFSET ,0x80000000U ,0x80000000U); /*############################################################################################################################ */ + // : TIMESTAMP COUNTER + /*Register : base_frequency_ID_register @ 0XFF260020

+ + Frequency in number of ticks per second. Valid range from 10 MHz to 100 MHz. + PSU_IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ 0x5f5e100 + + Program this register to match the clock frequency of the timestamp generator, in ticks per second. For example, for a 50 MHz + clock, program 0x02FAF080. This register is not accessible to the read-only programming interface. + (OFFSET, MASK, VALUE) (0XFF260020, 0xFFFFFFFFU ,0x05F5E100U) + RegMask = (IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_MASK | 0 ); + + RegVal = ((0x05F5E100U << IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_OFFSET ,0xFFFFFFFFU ,0x05F5E100U); + /*############################################################################################################################ */ + + /*Register : counter_control_register @ 0XFF260000

+ + Enable 0: The counter is disabled and not incrementing. 1: The counter is enabled and is incrementing. + PSU_IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN 0x1 + + Controls the counter increments. This register is not accessible to the read-only programming interface. + (OFFSET, MASK, VALUE) (0XFF260000, 0x00000001U ,0x00000001U) + RegMask = (IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_MASK | 0 ); + + RegVal = ((0x00000001U << IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (IOU_SCNTRS_COUNTER_CONTROL_REGISTER_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + // : TTC SRC SELECT return 1; } @@ -17135,14 +17574,106 @@ unsigned long psu_peripherals_powerdwn_data() { return 1; } -unsigned long psu_serdes_init_data() { - // : SERDES INITIALIZATION - // : GT REFERENCE CLOCK SOURCE SELECTION - /*Register : PLL_REF_SEL0 @ 0XFD410000

+unsigned long psu_lpd_xppu_data() { + // : XPPU INTERRUPT ENABLE + /*Register : IEN @ 0XFF980018

- PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - - 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135 - Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_APER_PARITY 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_APER_TZ 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_APER_PERM 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_MID_PARITY 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_MID_RO 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_MID_MISS 0X1 + + See Interuppt Status Register for details + PSU_LPD_XPPU_CFG_IEN_INV_APB 0X1 + + Interrupt Enable Register + (OFFSET, MASK, VALUE) (0XFF980018, 0x000000EFU ,0x000000EFU) + RegMask = (LPD_XPPU_CFG_IEN_APER_PARITY_MASK | LPD_XPPU_CFG_IEN_APER_TZ_MASK | LPD_XPPU_CFG_IEN_APER_PERM_MASK | LPD_XPPU_CFG_IEN_MID_PARITY_MASK | LPD_XPPU_CFG_IEN_MID_RO_MASK | LPD_XPPU_CFG_IEN_MID_MISS_MASK | LPD_XPPU_CFG_IEN_INV_APB_MASK | 0 ); + + RegVal = ((0x00000001U << LPD_XPPU_CFG_IEN_APER_PARITY_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_APER_TZ_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_APER_PERM_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_MID_PARITY_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_MID_RO_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_MID_MISS_SHIFT + | 0x00000001U << LPD_XPPU_CFG_IEN_INV_APB_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (LPD_XPPU_CFG_IEN_OFFSET ,0x000000EFU ,0x000000EFU); + /*############################################################################################################################ */ + + + return 1; +} +unsigned long psu_ddr_xmpu0_data() { + + return 1; +} +unsigned long psu_ddr_xmpu1_data() { + + return 1; +} +unsigned long psu_ddr_xmpu2_data() { + + return 1; +} +unsigned long psu_ddr_xmpu3_data() { + + return 1; +} +unsigned long psu_ddr_xmpu4_data() { + + return 1; +} +unsigned long psu_ddr_xmpu5_data() { + + return 1; +} +unsigned long psu_ocm_xmpu_data() { + + return 1; +} +unsigned long psu_fpd_xmpu_data() { + + return 1; +} +unsigned long psu_protection_lock_data() { + + return 1; +} +unsigned long psu_apply_master_tz() { + // : RPU + // : DP TZ + // : SATA TZ + // : PCIE TZ + // : USB TZ + // : SD TZ + // : GEM TZ + // : QSPI TZ + // : NAND TZ + + return 1; +} +unsigned long psu_serdes_init_data() { + // : SERDES INITIALIZATION + // : GT REFERENCE CLOCK SOURCE SELECTION + /*Register : PLL_REF_SEL0 @ 0XFD410000

+ + PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - + 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135 + Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved PSU_SERDES_PLL_REF_SEL0_PLLREFSEL0 0xD PLL0 Reference Selection Register @@ -17313,99 +17844,99 @@ unsigned long psu_serdes_init_data() { /*Register : L3_PLL_SS_STEPS_0_LSB @ 0XFD40E368

Spread Spectrum No of Steps [7:0] - PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x0 + PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0xE0 Spread Spectrum No of Steps bits 7:0 - (OFFSET, MASK, VALUE) (0XFD40E368, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E368, 0x000000FFU ,0x000000E0U) RegMask = (SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT + RegVal = ((0x000000E0U << SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x000000E0U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEPS_1_MSB @ 0XFD40E36C

Spread Spectrum No of Steps [10:8] - PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x0 + PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x3 Spread Spectrum No of Steps bits 10:8 - (OFFSET, MASK, VALUE) (0XFD40E36C, 0x00000007U ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E36C, 0x00000007U ,0x00000003U) RegMask = (SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT + RegVal = ((0x00000003U << SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEPS_0_LSB @ 0XFD406368

Spread Spectrum No of Steps [7:0] - PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x0 + PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB 0x58 Spread Spectrum No of Steps bits 7:0 - (OFFSET, MASK, VALUE) (0XFD406368, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406368, 0x000000FFU ,0x00000058U) RegMask = (SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT + RegVal = ((0x00000058U << SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000058U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEPS_1_MSB @ 0XFD40636C

Spread Spectrum No of Steps [10:8] - PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x0 + PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB 0x3 Spread Spectrum No of Steps bits 10:8 - (OFFSET, MASK, VALUE) (0XFD40636C, 0x00000007U ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40636C, 0x00000007U ,0x00000003U) RegMask = (SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT + RegVal = ((0x00000003U << SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_0_LSB @ 0XFD406370

Step Size for Spread Spectrum [7:0] - PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x0 + PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x7C Step Size for Spread Spectrum LSB - (OFFSET, MASK, VALUE) (0XFD406370, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406370, 0x000000FFU ,0x0000007CU) RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT + RegVal = ((0x0000007CU << SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x0000007CU); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_1 @ 0XFD406374

Step Size for Spread Spectrum [15:8] - PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x0 + PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x33 Step Size for Spread Spectrum 1 - (OFFSET, MASK, VALUE) (0XFD406374, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406374, 0x000000FFU ,0x00000033U) RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT + RegVal = ((0x00000033U << SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000033U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_2 @ 0XFD406378

Step Size for Spread Spectrum [23:16] - PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x0 + PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x2 Step Size for Spread Spectrum 2 - (OFFSET, MASK, VALUE) (0XFD406378, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD406378, 0x000000FFU ,0x00000002U) RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT + RegVal = ((0x00000002U << SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000002U); /*############################################################################################################################ */ /*Register : L1_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40637C

@@ -17497,43 +18028,43 @@ unsigned long psu_serdes_init_data() { /*Register : L3_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40E370

Step Size for Spread Spectrum [7:0] - PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0x0 + PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB 0xC9 Step Size for Spread Spectrum LSB - (OFFSET, MASK, VALUE) (0XFD40E370, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E370, 0x000000FFU ,0x000000C9U) RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT + RegVal = ((0x000000C9U << SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x000000C9U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEP_SIZE_1 @ 0XFD40E374

Step Size for Spread Spectrum [15:8] - PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0x0 + PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1 0xD2 Step Size for Spread Spectrum 1 - (OFFSET, MASK, VALUE) (0XFD40E374, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E374, 0x000000FFU ,0x000000D2U) RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT + RegVal = ((0x000000D2U << SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x000000D2U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEP_SIZE_2 @ 0XFD40E378

Step Size for Spread Spectrum [23:16] - PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x0 + PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2 0x1 Step Size for Spread Spectrum 2 - (OFFSET, MASK, VALUE) (0XFD40E378, 0x000000FFU ,0x00000000U) + (OFFSET, MASK, VALUE) (0XFD40E378, 0x000000FFU ,0x00000001U) RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK | 0 ); - RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT + RegVal = ((0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000000U); + PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000001U); /*############################################################################################################################ */ /*Register : L3_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40E37C

@@ -17674,6 +18205,851 @@ unsigned long psu_serdes_init_data() { PSU_Mask_Write (SERDES_L3_TXPMA_ST_0_OFFSET ,0x000000F0U ,0x000000F0U); /*############################################################################################################################ */ + // : ENABLE CHICKEN BIT FOR PCIE AND USB + /*Register : L0_TM_AUX_0 @ 0XFD4010CC

+ + Spare- not used + PSU_SERDES_L0_TM_AUX_0_BIT_2 1 + + Spare registers + (OFFSET, MASK, VALUE) (0XFD4010CC, 0x00000020U ,0x00000020U) + RegMask = (SERDES_L0_TM_AUX_0_BIT_2_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_AUX_0_BIT_2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_AUX_0_OFFSET ,0x00000020U ,0x00000020U); + /*############################################################################################################################ */ + + /*Register : L2_TM_AUX_0 @ 0XFD4090CC

+ + Spare- not used + PSU_SERDES_L2_TM_AUX_0_BIT_2 1 + + Spare registers + (OFFSET, MASK, VALUE) (0XFD4090CC, 0x00000020U ,0x00000020U) + RegMask = (SERDES_L2_TM_AUX_0_BIT_2_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_AUX_0_BIT_2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_AUX_0_OFFSET ,0x00000020U ,0x00000020U); + /*############################################################################################################################ */ + + // : ENABLING EYE SURF + /*Register : L0_TM_DIG_8 @ 0XFD401074

+ + Enable Eye Surf + PSU_SERDES_L0_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD401074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L0_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L1_TM_DIG_8 @ 0XFD405074

+ + Enable Eye Surf + PSU_SERDES_L1_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD405074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L1_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L2_TM_DIG_8 @ 0XFD409074

+ + Enable Eye Surf + PSU_SERDES_L2_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD409074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L2_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L3_TM_DIG_8 @ 0XFD40D074

+ + Enable Eye Surf + PSU_SERDES_L3_TM_DIG_8_EYESURF_ENABLE 0x1 + + Test modes for Elastic buffer and enabling Eye Surf + (OFFSET, MASK, VALUE) (0XFD40D074, 0x00000010U ,0x00000010U) + RegMask = (SERDES_L3_TM_DIG_8_EYESURF_ENABLE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_DIG_8_EYESURF_ENABLE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U); + /*############################################################################################################################ */ + + // : ILL SETTINGS FOR GAIN AND LOCK SETTINGS + /*Register : L0_TM_MISC2 @ 0XFD40189C

+ + ILL calib counts BYPASSED with calcode bits + PSU_SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + sampler cal + (OFFSET, MASK, VALUE) (0XFD40189C, 0x00000080U ,0x00000080U) + RegMask = (SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL1 @ 0XFD4018F8

+ + IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x64 + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4018F8, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL2 @ 0XFD4018FC

+ + IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x64 + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4018FC, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L0_TM_ILL12 @ 0XFD401990

+ + G1A pll ctr bypass value + PSU_SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x11 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD401990, 0x000000FFU ,0x00000011U) + RegMask = (SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000011U << SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ILL12_OFFSET ,0x000000FFU ,0x00000011U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL1 @ 0XFD401924

+ + E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0x4 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD401924, 0x000000FFU ,0x00000004U) + RegMask = (SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x00000004U << SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL1_OFFSET ,0x000000FFU ,0x00000004U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL2 @ 0XFD401928

+ + E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0xFE + + epi cal code + (OFFSET, MASK, VALUE) (0XFD401928, 0x000000FFU ,0x000000FEU) + RegMask = (SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x000000FEU << SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL2_OFFSET ,0x000000FFU ,0x000000FEU); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL3 @ 0XFD401900

+ + IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x64 + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD401900, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL3 @ 0XFD40192C

+ + E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x0 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40192C, 0x000000FFU ,0x00000000U) + RegMask = (SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000000U << SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : L0_TM_ILL8 @ 0XFD401980

+ + ILL calibration code change wait time + PSU_SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + ILL cal routine control + (OFFSET, MASK, VALUE) (0XFD401980, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL8 @ 0XFD401914

+ + IQ ILL polytrim bypass value + PSU_SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + iqpi polytrim + (OFFSET, MASK, VALUE) (0XFD401914, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L0_TM_IQ_ILL9 @ 0XFD401918

+ + bypass IQ polytrim + PSU_SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD401918, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL8 @ 0XFD401940

+ + E ILL polytrim bypass value + PSU_SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + epi polytrim + (OFFSET, MASK, VALUE) (0XFD401940, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L0_TM_E_ILL9 @ 0XFD401944

+ + bypass E polytrim + PSU_SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD401944, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L2_TM_MISC2 @ 0XFD40989C

+ + ILL calib counts BYPASSED with calcode bits + PSU_SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + sampler cal + (OFFSET, MASK, VALUE) (0XFD40989C, 0x00000080U ,0x00000080U) + RegMask = (SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL1 @ 0XFD4098F8

+ + IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x1A + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4098F8, 0x000000FFU ,0x0000001AU) + RegMask = (SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x0000001AU); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL2 @ 0XFD4098FC

+ + IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x1A + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD4098FC, 0x000000FFU ,0x0000001AU) + RegMask = (SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x0000001AU); + /*############################################################################################################################ */ + + /*Register : L2_TM_ILL12 @ 0XFD409990

+ + G1A pll ctr bypass value + PSU_SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x10 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD409990, 0x000000FFU ,0x00000010U) + RegMask = (SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000010U << SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ILL12_OFFSET ,0x000000FFU ,0x00000010U); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL1 @ 0XFD409924

+ + E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0xFE + + epi cal code + (OFFSET, MASK, VALUE) (0XFD409924, 0x000000FFU ,0x000000FEU) + RegMask = (SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x000000FEU << SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL1_OFFSET ,0x000000FFU ,0x000000FEU); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL2 @ 0XFD409928

+ + E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0x0 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD409928, 0x000000FFU ,0x00000000U) + RegMask = (SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x00000000U << SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL2_OFFSET ,0x000000FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL3 @ 0XFD409900

+ + IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x1A + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD409900, 0x000000FFU ,0x0000001AU) + RegMask = (SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x0000001AU); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL3 @ 0XFD40992C

+ + E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x0 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40992C, 0x000000FFU ,0x00000000U) + RegMask = (SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000000U << SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : L2_TM_ILL8 @ 0XFD409980

+ + ILL calibration code change wait time + PSU_SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + ILL cal routine control + (OFFSET, MASK, VALUE) (0XFD409980, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL8 @ 0XFD409914

+ + IQ ILL polytrim bypass value + PSU_SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + iqpi polytrim + (OFFSET, MASK, VALUE) (0XFD409914, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L2_TM_IQ_ILL9 @ 0XFD409918

+ + bypass IQ polytrim + PSU_SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD409918, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL8 @ 0XFD409940

+ + E ILL polytrim bypass value + PSU_SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + epi polytrim + (OFFSET, MASK, VALUE) (0XFD409940, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L2_TM_E_ILL9 @ 0XFD409944

+ + bypass E polytrim + PSU_SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD409944, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TM_MISC2 @ 0XFD40D89C

+ + ILL calib counts BYPASSED with calcode bits + PSU_SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS 0x1 + + sampler cal + (OFFSET, MASK, VALUE) (0XFD40D89C, 0x00000080U ,0x00000080U) + RegMask = (SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL1 @ 0XFD40D8F8

+ + IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0 0x7D + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD40D8F8, 0x000000FFU ,0x0000007DU) + RegMask = (SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x0000007DU); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL2 @ 0XFD40D8FC

+ + IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1 0x7D + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD40D8FC, 0x000000FFU ,0x0000007DU) + RegMask = (SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x0000007DU); + /*############################################################################################################################ */ + + /*Register : L3_TM_ILL12 @ 0XFD40D990

+ + G1A pll ctr bypass value + PSU_SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL 0x1 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD40D990, 0x000000FFU ,0x00000001U) + RegMask = (SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ILL12_OFFSET ,0x000000FFU ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL1 @ 0XFD40D924

+ + E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS + PSU_SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0 0x9C + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40D924, 0x000000FFU ,0x0000009CU) + RegMask = (SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK | 0 ); + + RegVal = ((0x0000009CU << SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL1_OFFSET ,0x000000FFU ,0x0000009CU); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL2 @ 0XFD40D928

+ + E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2 + PSU_SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1 0x39 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40D928, 0x000000FFU ,0x00000039U) + RegMask = (SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK | 0 ); + + RegVal = ((0x00000039U << SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL2_OFFSET ,0x000000FFU ,0x00000039U); + /*############################################################################################################################ */ + + /*Register : L3_TM_ILL11 @ 0XFD40D98C

+ + G2A_PCIe1 PLL ctr bypass value + PSU_SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL 0x2 + + ill pll counter values + (OFFSET, MASK, VALUE) (0XFD40D98C, 0x000000F0U ,0x00000020U) + RegMask = (SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_MASK | 0 ); + + RegVal = ((0x00000002U << SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ILL11_OFFSET ,0x000000F0U ,0x00000020U); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL3 @ 0XFD40D900

+ + IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2 0x7D + + iqpi cal code + (OFFSET, MASK, VALUE) (0XFD40D900, 0x000000FFU ,0x0000007DU) + RegMask = (SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x0000007DU); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL3 @ 0XFD40D92C

+ + E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3 + PSU_SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2 0x64 + + epi cal code + (OFFSET, MASK, VALUE) (0XFD40D92C, 0x000000FFU ,0x00000064U) + RegMask = (SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK | 0 ); + + RegVal = ((0x00000064U << SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000064U); + /*############################################################################################################################ */ + + /*Register : L3_TM_ILL8 @ 0XFD40D980

+ + ILL calibration code change wait time + PSU_SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT 0xFF + + ILL cal routine control + (OFFSET, MASK, VALUE) (0XFD40D980, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL8 @ 0XFD40D914

+ + IQ ILL polytrim bypass value + PSU_SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL 0xF7 + + iqpi polytrim + (OFFSET, MASK, VALUE) (0XFD40D914, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L3_TM_IQ_ILL9 @ 0XFD40D918

+ + bypass IQ polytrim + PSU_SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD40D918, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL8 @ 0XFD40D940

+ + E ILL polytrim bypass value + PSU_SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL 0xF7 + + epi polytrim + (OFFSET, MASK, VALUE) (0XFD40D940, 0x000000FFU ,0x000000F7U) + RegMask = (SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK | 0 ); + + RegVal = ((0x000000F7U << SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U); + /*############################################################################################################################ */ + + /*Register : L3_TM_E_ILL9 @ 0XFD40D944

+ + bypass E polytrim + PSU_SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM 0x1 + + enables for lf,constant gm trim and polytirm + (OFFSET, MASK, VALUE) (0XFD40D944, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + // : SYMBOL LOCK AND WAIT + /*Register : L0_TM_DIG_21 @ 0XFD4010A8

+ + pre lock comma count threshold. 2'b 00 : 3, 2'b 01 : 5, 2'b 10 : 10, 2'b 11 : 20 + PSU_SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH 0x11 + + Control symbol alignment locking - wait counts + (OFFSET, MASK, VALUE) (0XFD4010A8, 0x00000003U ,0x00000003U) + RegMask = (SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_MASK | 0 ); + + RegVal = ((0x00000011U << SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_DIG_21_OFFSET ,0x00000003U ,0x00000003U); + /*############################################################################################################################ */ + + /*Register : L0_TM_DIG_10 @ 0XFD40107C

+ + CDR lock wait time. (1-16 us). cdr_lock_wait_time = 4'b xxxx + 4'b 0001 + PSU_SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME 0xF + + test control for changing cdr lock wait time + (OFFSET, MASK, VALUE) (0XFD40107C, 0x0000000FU ,0x0000000FU) + RegMask = (SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_MASK | 0 ); + + RegVal = ((0x0000000FU << SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_DIG_10_OFFSET ,0x0000000FU ,0x0000000FU); + /*############################################################################################################################ */ + + // : SIOU SETTINGS FOR BYPASS CONTROL,HSRX-DIG + /*Register : L0_TM_RST_DLY @ 0XFD4019A4

+ + Delay apb reset by specified amount + PSU_SERDES_L0_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD4019A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L0_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L0_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L0_TM_ANA_BYP_15 @ 0XFD401038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD401038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L0_TM_ANA_BYP_12 @ 0XFD40102C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40102C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L0_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L1_TM_RST_DLY @ 0XFD4059A4

+ + Delay apb reset by specified amount + PSU_SERDES_L1_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD4059A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L1_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L1_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L1_TM_ANA_BYP_15 @ 0XFD405038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD405038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L1_TM_ANA_BYP_12 @ 0XFD40502C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40502C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L2_TM_RST_DLY @ 0XFD4099A4

+ + Delay apb reset by specified amount + PSU_SERDES_L2_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD4099A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L2_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L2_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L2_TM_ANA_BYP_15 @ 0XFD409038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD409038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L2_TM_ANA_BYP_12 @ 0XFD40902C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40902C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L2_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L3_TM_RST_DLY @ 0XFD40D9A4

+ + Delay apb reset by specified amount + PSU_SERDES_L3_TM_RST_DLY_APB_RST_DLY 0xFF + + reset delay for apb reset w.r.t pso of hsrx + (OFFSET, MASK, VALUE) (0XFD40D9A4, 0x000000FFU ,0x000000FFU) + RegMask = (SERDES_L3_TM_RST_DLY_APB_RST_DLY_MASK | 0 ); + + RegVal = ((0x000000FFU << SERDES_L3_TM_RST_DLY_APB_RST_DLY_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU); + /*############################################################################################################################ */ + + /*Register : L3_TM_ANA_BYP_15 @ 0XFD40D038

+ + Enable Bypass for <7> of TM_ANA_BYPS_15 + PSU_SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE 0x1 + + Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c + (OFFSET, MASK, VALUE) (0XFD40D038, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + + /*Register : L3_TM_ANA_BYP_12 @ 0XFD40D02C

+ + Enable Bypass for <7> of TM_ANA_BYPS_12 + PSU_SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG 0x1 + + Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls + (OFFSET, MASK, VALUE) (0XFD40D02C, 0x00000040U ,0x00000040U) + RegMask = (SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U); + /*############################################################################################################################ */ + // : GT LANE SETTINGS /*Register : ICM_CFG0 @ 0XFD410010

@@ -17719,48 +19095,128 @@ unsigned long psu_serdes_init_data() { // : ENABLE SERIAL DATA MUX DEEMPH /*Register : L1_TXPMD_TM_45 @ 0XFD404CB4

- Enable/disable DP post2 path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH 0x1 + Enable/disable DP post2 path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH 0x1 + + Override enable/disable of DP post2 path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH 0x1 + + Override enable/disable of DP post1 path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH 0x1 + + Enable/disable DP main path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH 0x1 + + Override enable/disable of DP main path + PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH 0x1 + + Post or pre or main DP path selection + (OFFSET, MASK, VALUE) (0XFD404CB4, 0x00000037U ,0x00000037U) + RegMask = (SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT + | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TXPMD_TM_45_OFFSET ,0x00000037U ,0x00000037U); + /*############################################################################################################################ */ + + /*Register : L1_TX_ANA_TM_118 @ 0XFD4041D8

+ + Test register force for enabling/disablign TX deemphasis bits <17:0> + PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0 0x1 + + Enable Override of TX deemphasis + (OFFSET, MASK, VALUE) (0XFD4041D8, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L1_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + /*Register : L3_TX_ANA_TM_118 @ 0XFD40C1D8

+ + Test register force for enabling/disablign TX deemphasis bits <17:0> + PSU_SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0 0x1 + + Enable Override of TX deemphasis + (OFFSET, MASK, VALUE) (0XFD40C1D8, 0x00000001U ,0x00000001U) + RegMask = (SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U); + /*############################################################################################################################ */ + + // : CDR AND RX EQUALIZATION SETTINGS + /*Register : L3_TM_CDR5 @ 0XFD40DC14

+ + FPHL FSM accumulate cycles + PSU_SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES 0x7 + + FFL Phase0 int gain aka 2ol SD update rate + PSU_SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN 0x6 + + Fast phase lock controls -- FSM accumulator cycle control and phase 0 int gain control. + (OFFSET, MASK, VALUE) (0XFD40DC14, 0x000000FFU ,0x000000E6U) + RegMask = (SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_MASK | SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_MASK | 0 ); + + RegVal = ((0x00000007U << SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_SHIFT + | 0x00000006U << SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_CDR5_OFFSET ,0x000000FFU ,0x000000E6U); + /*############################################################################################################################ */ + + /*Register : L3_TM_CDR16 @ 0XFD40DC40

+ + FFL Phase0 prop gain aka 1ol SD update rate + PSU_SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN 0xC - Override enable/disable of DP post2 path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH 0x1 + Fast phase lock controls -- phase 0 prop gain + (OFFSET, MASK, VALUE) (0XFD40DC40, 0x0000001FU ,0x0000000CU) + RegMask = (SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_MASK | 0 ); - Override enable/disable of DP post1 path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH 0x1 + RegVal = ((0x0000000CU << SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TM_CDR16_OFFSET ,0x0000001FU ,0x0000000CU); + /*############################################################################################################################ */ - Enable/disable DP main path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH 0x1 + /*Register : L3_TM_EQ0 @ 0XFD40D94C

- Override enable/disable of DP main path - PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH 0x1 + EQ stg 2 controls BYPASSED + PSU_SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP 1 - Post or pre or main DP path selection - (OFFSET, MASK, VALUE) (0XFD404CB4, 0x00000037U ,0x00000037U) - RegMask = (SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK | 0 ); + eq stg1 and stg2 controls + (OFFSET, MASK, VALUE) (0XFD40D94C, 0x00000020U ,0x00000020U) + RegMask = (SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_MASK | 0 ); - RegVal = ((0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT - | 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT + RegVal = ((0x00000001U << SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_TXPMD_TM_45_OFFSET ,0x00000037U ,0x00000037U); + PSU_Mask_Write (SERDES_L3_TM_EQ0_OFFSET ,0x00000020U ,0x00000020U); /*############################################################################################################################ */ - /*Register : L1_TX_ANA_TM_118 @ 0XFD4041D8

+ /*Register : L3_TM_EQ1 @ 0XFD40D950

- Test register force for enabling/disablign TX deemphasis bits <17:0> - PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0 0x1 + EQ STG2 RL PROG + PSU_SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG 0x2 - Enable Override of TX deemphasis - (OFFSET, MASK, VALUE) (0XFD4041D8, 0x00000001U ,0x00000001U) - RegMask = (SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK | 0 ); + EQ stg 2 preamp mode val + PSU_SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL 0x1 - RegVal = ((0x00000001U << SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT + eq stg1 and stg2 controls + (OFFSET, MASK, VALUE) (0XFD40D950, 0x00000007U ,0x00000006U) + RegMask = (SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_MASK | SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_MASK | 0 ); + + RegVal = ((0x00000002U << SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_SHIFT + | 0x00000001U << SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (SERDES_L1_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U); + PSU_Mask_Write (SERDES_L3_TM_EQ1_OFFSET ,0x00000007U ,0x00000006U); /*############################################################################################################################ */ + // : GEM SERDES SETTINGS // : ENABLE PRE EMPHAIS AND VOLTAGE SWING /*Register : L1_TXPMD_TM_48 @ 0XFD404CC0

@@ -17790,6 +19246,20 @@ unsigned long psu_serdes_init_data() { PSU_Mask_Write (SERDES_L1_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000000U); /*############################################################################################################################ */ + /*Register : L3_TX_ANA_TM_18 @ 0XFD40C048

+ + pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved + PSU_SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0 0x1 + + Override for PIPE TX de-emphasis + (OFFSET, MASK, VALUE) (0XFD40C048, 0x000000FFU ,0x00000001U) + RegMask = (SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK | 0 ); + + RegVal = ((0x00000001U << SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SERDES_L3_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000001U); + /*############################################################################################################################ */ + return 1; } @@ -17825,6 +19295,20 @@ unsigned long psu_resetout_init_data() { PSU_Mask_Write (USB3_0_FPD_POWER_PRSNT_OFFSET ,0x00000001U ,0x00000001U); /*############################################################################################################################ */ + /*Register : fpd_pipe_clk @ 0XFF9D007C

+ + This bit is used to choose between PIPE clock coming from SerDes and the suspend clk + PSU_USB3_0_FPD_PIPE_CLK_OPTION 0x0 + + fpd_pipe_clk + (OFFSET, MASK, VALUE) (0XFF9D007C, 0x00000001U ,0x00000000U) + RegMask = (USB3_0_FPD_PIPE_CLK_OPTION_MASK | 0 ); + + RegVal = ((0x00000000U << USB3_0_FPD_PIPE_CLK_OPTION_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (USB3_0_FPD_PIPE_CLK_OFFSET ,0x00000001U ,0x00000000U); + /*############################################################################################################################ */ + // : /*Register : RST_LPD_TOP @ 0XFF5E023C

@@ -17888,27 +19372,23 @@ unsigned long psu_resetout_init_data() { PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000000U); /*############################################################################################################################ */ - // : PUTTING PCIE IN RESET + // : PUTTING PCIE CFG AND BRIDGE IN RESET /*Register : RST_FPD_TOP @ 0XFD1A0100

PCIE config reset PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET 0X0 - PCIE control block level reset - PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET 0X0 - PCIE bridge block level reset (AXI interface) PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET 0X0 FPD Block level software controlled reset - (OFFSET, MASK, VALUE) (0XFD1A0100, 0x000E0000U ,0x00000000U) - RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK | 0 ); + (OFFSET, MASK, VALUE) (0XFD1A0100, 0x000C0000U ,0x00000000U) + RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK | 0 ); RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT - | 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT | 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000E0000U ,0x00000000U); + PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000C0000U ,0x00000000U); /*############################################################################################################################ */ // : PUTTING DP IN RESET @@ -17964,7 +19444,7 @@ unsigned long psu_resetout_init_data() { . The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger alue. Note: This field is valid only in device mode. - PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM 0X9 + PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM 0x9 Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the @@ -17972,7 +19452,7 @@ unsigned long psu_resetout_init_data() { ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur ng hibernation. - This bit is valid only in device mode. - PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY 0x0 Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen _n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre @@ -17981,42 +19461,33 @@ unsigned long psu_resetout_init_data() { n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet d. - PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM 0x0 USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0. - PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL 0X0 - - Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co - figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app - ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F - r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s - t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati - g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi - when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed. - PSU_USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20 0X1 + PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL 0x0 Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1 full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0. - PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF 0x0 ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s lected through DWC_USB3_HSPHY_INTERFACE. - PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL 0X1 + PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL 0x1 PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz. - PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF 0X0 + PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF 0x0 HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for @@ -18026,25 +19497,24 @@ unsigned long psu_resetout_init_data() { ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One 60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times - PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL 0X7 + PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL 0x7 Global USB2 PHY Configuration Register The application must program this register before starting any transactions on either he SoC bus or the USB. In Device-only configurations, only one register is needed. In Host mode, per-port registers are imple ented. - (OFFSET, MASK, VALUE) (0XFE20C200, 0x00003FFFU ,0x00002457U) - RegMask = (USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK | USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK | USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK | USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK | USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK | USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK | 0 ); + (OFFSET, MASK, VALUE) (0XFE20C200, 0x00003FBFU ,0x00002417U) + RegMask = (USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK | USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK | USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK | USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK | USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK | 0 ); RegVal = ((0x00000009U << USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT - | 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT | 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT | 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT | 0x00000007U << USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (USB3_0_XHCI_GUSB2PHYCFG_OFFSET ,0x00003FFFU ,0x00002457U); + PSU_Mask_Write (USB3_0_XHCI_GUSB2PHYCFG_OFFSET ,0x00003FBFU ,0x00002417U); /*############################################################################################################################ */ /*Register : GFLADJ @ 0XFE20C630

@@ -18058,7 +19528,7 @@ unsigned long psu_resetout_init_data() { uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value) - PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ 0X0 + PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ 0x0 Global Frame Length Adjustment Register This register provides options for the software to control the core behavior with res ect to SOF (Start of Frame) and ITP (Isochronous Timestamp Packet) timers and frame timer functionality. It provides an optio @@ -18070,64 +19540,9 @@ unsigned long psu_resetout_init_data() { RegVal = ((0x00000000U << USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT | 0 ) & RegMask); */ PSU_Mask_Write (USB3_0_XHCI_GFLADJ_OFFSET ,0x003FFF00U ,0x00000000U); - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE0 - /*Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

- - Status Read value of PLL Lock - PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD4023E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L0_PLL_STATUS_READ_1_OFFSET,0x00000010U); - - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE1 - /*Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

- - Status Read value of PLL Lock - PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD4063E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L1_PLL_STATUS_READ_1_OFFSET,0x00000010U); - - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE2 - /*Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

- - Status Read value of PLL Lock - PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD40A3E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L2_PLL_STATUS_READ_1_OFFSET,0x00000010U); - - /*############################################################################################################################ */ - - // : CHECK PLL LOCK FOR LANE3 - /*Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

- - Status Read value of PLL Lock - PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 - (OFFSET, MASK, VALUE) (0XFD40E3E4, 0x00000010U ,0x00000010U) */ - mask_poll(SERDES_L3_PLL_STATUS_READ_1_OFFSET,0x00000010U); - /*############################################################################################################################ */ // : UPDATING TWO PCIE REGISTERS DEFAULT VALUES, AS THESE REGISTERS HAVE INCORRECT RESET VALUES IN SILICON. - /*Register : ATTR_37 @ 0XFD480094

- - Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r - gister.; EP=0x0001; RP=0x0001 - PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY 0X1 - - ATTR_37 - (OFFSET, MASK, VALUE) (0XFD480094, 0x00004000U ,0x00004000U) - RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK | 0 ); - - RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT - | 0 ) & RegMask); */ - PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00004000U ,0x00004000U); - /*############################################################################################################################ */ - /*Register : ATTR_25 @ 0XFD480064

If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root @@ -18659,13 +20074,18 @@ unsigned long psu_resetout_init_data() { Required for Root.; EP=0x0000; RP=0x0001 PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP 0x1 + Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r + gister.; EP=0x0001; RP=0x0001 + PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY 0x1 + ATTR_37 - (OFFSET, MASK, VALUE) (0XFD480094, 0x00000200U ,0x00000200U) - RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK | 0 ); + (OFFSET, MASK, VALUE) (0XFD480094, 0x00004200U ,0x00004200U) + RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK | PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK | 0 ); RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT + | 0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT | 0 ) & RegMask); */ - PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00000200U ,0x00000200U); + PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00004200U ,0x00004200U); /*############################################################################################################################ */ /*Register : ATTR_93 @ 0XFD480174

@@ -18839,6 +20259,271 @@ unsigned long psu_resetout_init_data() { PSU_Mask_Write (PCIE_ATTRIB_ATTR_43_OFFSET ,0x00000100U ,0x00000000U); /*############################################################################################################################ */ + /*Register : ATTR_48 @ 0XFD4800C0

+ + MSI-X Table Size. This value is transferred to the MSI-X Message Control[10:0] field. Set to 0 if MSI-X is not enabled. Note + hat the core does not implement the table; that must be implemented in user logic.; EP=0x0003; RP=0x0000 + PSU_PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE 0 + + ATTR_48 + (OFFSET, MASK, VALUE) (0XFD4800C0, 0x000007FFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_48_OFFSET ,0x000007FFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_46 @ 0XFD4800B8

+ + MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0001; + P=0x0000 + PSU_PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET 0 + + ATTR_46 + (OFFSET, MASK, VALUE) (0XFD4800B8, 0x0000FFFFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_46_OFFSET ,0x0000FFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_47 @ 0XFD4800BC

+ + MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0000; + P=0x0000 + PSU_PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET 0 + + ATTR_47 + (OFFSET, MASK, VALUE) (0XFD4800BC, 0x00001FFFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_47_OFFSET ,0x00001FFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_44 @ 0XFD4800B0

+ + MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x0001; RP=0x0000 + PSU_PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET 0 + + ATTR_44 + (OFFSET, MASK, VALUE) (0XFD4800B0, 0x0000FFFFU ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_44_OFFSET ,0x0000FFFFU ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_45 @ 0XFD4800B4

+ + MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x1000; RP=0x0000 + PSU_PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET 0 + + ATTR_45 + (OFFSET, MASK, VALUE) (0XFD4800B4, 0x0000FFF8U ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_45_OFFSET ,0x0000FFF8U ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : CB @ 0XFD48031C

+ + DT837748 Enable + PSU_PCIE_ATTRIB_CB_CB1 0x0 + + ECO Register 1 + (OFFSET, MASK, VALUE) (0XFD48031C, 0x00000002U ,0x00000000U) + RegMask = (PCIE_ATTRIB_CB_CB1_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_CB_CB1_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_CB_OFFSET ,0x00000002U ,0x00000000U); + /*############################################################################################################################ */ + + /*Register : ATTR_35 @ 0XFD48008C

+ + Active State PM Support. Indicates the level of active state power management supported by the selected PCI Express Link, enc + ded as follows: 0 Reserved, 1 L0s entry supported, 2 Reserved, 3 L0s and L1 entry supported.; EP=0x0001; RP=0x0001 + PSU_PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT 0x0 + + ATTR_35 + (OFFSET, MASK, VALUE) (0XFD48008C, 0x00003000U ,0x00000000U) + RegMask = (PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_MASK | 0 ); + + RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (PCIE_ATTRIB_ATTR_35_OFFSET ,0x00003000U ,0x00000000U); + /*############################################################################################################################ */ + + // : PUTTING PCIE CONTROL IN RESET + /*Register : RST_FPD_TOP @ 0XFD1A0100

+ + PCIE control block level reset + PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET 0X0 + + FPD Block level software controlled reset + (OFFSET, MASK, VALUE) (0XFD1A0100, 0x00020000U ,0x00000000U) + RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | 0 ); + + RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00020000U ,0x00000000U); + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE0 + /*Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4

+ + Status Read value of PLL Lock + PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD4023E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L0_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE1 + /*Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4

+ + Status Read value of PLL Lock + PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD4063E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L1_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE2 + /*Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4

+ + Status Read value of PLL Lock + PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD40A3E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L2_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : CHECK PLL LOCK FOR LANE3 + /*Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4

+ + Status Read value of PLL Lock + PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ 1 + (OFFSET, MASK, VALUE) (0XFD40E3E4, 0x00000010U ,0x00000010U) */ + mask_poll(SERDES_L3_PLL_STATUS_READ_1_OFFSET,0x00000010U); + + /*############################################################################################################################ */ + + // : SATA AHCI VENDOR SETTING + /*Register : PP2C @ 0XFD0C00AC

+ + CIBGMN: COMINIT Burst Gap Minimum. + PSU_SATA_AHCI_VENDOR_PP2C_CIBGMN 0x18 + + CIBGMX: COMINIT Burst Gap Maximum. + PSU_SATA_AHCI_VENDOR_PP2C_CIBGMX 0x40 + + CIBGN: COMINIT Burst Gap Nominal. + PSU_SATA_AHCI_VENDOR_PP2C_CIBGN 0x18 + + CINMP: COMINIT Negate Minimum Period. + PSU_SATA_AHCI_VENDOR_PP2C_CINMP 0x28 + + PP2C - Port Phy2Cfg Register. This register controls the configuration of the Phy Control OOB timing for the COMINIT paramete + s for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00AC, 0xFFFFFFFFU ,0x28184018U) + RegMask = (SATA_AHCI_VENDOR_PP2C_CIBGMN_MASK | SATA_AHCI_VENDOR_PP2C_CIBGMX_MASK | SATA_AHCI_VENDOR_PP2C_CIBGN_MASK | SATA_AHCI_VENDOR_PP2C_CINMP_MASK | 0 ); + + RegVal = ((0x00000018U << SATA_AHCI_VENDOR_PP2C_CIBGMN_SHIFT + | 0x00000040U << SATA_AHCI_VENDOR_PP2C_CIBGMX_SHIFT + | 0x00000018U << SATA_AHCI_VENDOR_PP2C_CIBGN_SHIFT + | 0x00000028U << SATA_AHCI_VENDOR_PP2C_CINMP_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP2C_OFFSET ,0xFFFFFFFFU ,0x28184018U); + /*############################################################################################################################ */ + + /*Register : PP3C @ 0XFD0C00B0

+ + CWBGMN: COMWAKE Burst Gap Minimum. + PSU_SATA_AHCI_VENDOR_PP3C_CWBGMN 0x06 + + CWBGMX: COMWAKE Burst Gap Maximum. + PSU_SATA_AHCI_VENDOR_PP3C_CWBGMX 0x14 + + CWBGN: COMWAKE Burst Gap Nominal. + PSU_SATA_AHCI_VENDOR_PP3C_CWBGN 0x08 + + CWNMP: COMWAKE Negate Minimum Period. + PSU_SATA_AHCI_VENDOR_PP3C_CWNMP 0x0E + + PP3C - Port Phy3CfgRegister. This register controls the configuration of the Phy Control OOB timing for the COMWAKE parameter + for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00B0, 0xFFFFFFFFU ,0x0E081406U) + RegMask = (SATA_AHCI_VENDOR_PP3C_CWBGMN_MASK | SATA_AHCI_VENDOR_PP3C_CWBGMX_MASK | SATA_AHCI_VENDOR_PP3C_CWBGN_MASK | SATA_AHCI_VENDOR_PP3C_CWNMP_MASK | 0 ); + + RegVal = ((0x00000006U << SATA_AHCI_VENDOR_PP3C_CWBGMN_SHIFT + | 0x00000014U << SATA_AHCI_VENDOR_PP3C_CWBGMX_SHIFT + | 0x00000008U << SATA_AHCI_VENDOR_PP3C_CWBGN_SHIFT + | 0x0000000EU << SATA_AHCI_VENDOR_PP3C_CWNMP_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP3C_OFFSET ,0xFFFFFFFFU ,0x0E081406U); + /*############################################################################################################################ */ + + /*Register : PP4C @ 0XFD0C00B4

+ + BMX: COM Burst Maximum. + PSU_SATA_AHCI_VENDOR_PP4C_BMX 0x13 + + BNM: COM Burst Nominal. + PSU_SATA_AHCI_VENDOR_PP4C_BNM 0x08 + + SFD: Signal Failure Detection, if the signal detection de-asserts for a time greater than this then the OOB detector will det + rmine this is a line idle and cause the PhyInit state machine to exit the Phy Ready State. A value of zero disables the Signa + Failure Detector. The value is based on the OOB Detector Clock typically (PMCLK Clock Period) * SFD giving a nominal time of + 500ns based on a 150MHz PMCLK. + PSU_SATA_AHCI_VENDOR_PP4C_SFD 0x4A + + PTST: Partial to Slumber timer value, specific delay the controller should apply while in partial before entering slumber. Th + value is bases on the system clock divided by 128, total delay = (Sys Clock Period) * PTST * 128 + PSU_SATA_AHCI_VENDOR_PP4C_PTST 0x06 + + PP4C - Port Phy4Cfg Register. This register controls the configuration of the Phy Control Burst timing for the COM parameters + for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00B4, 0xFFFFFFFFU ,0x064A0813U) + RegMask = (SATA_AHCI_VENDOR_PP4C_BMX_MASK | SATA_AHCI_VENDOR_PP4C_BNM_MASK | SATA_AHCI_VENDOR_PP4C_SFD_MASK | SATA_AHCI_VENDOR_PP4C_PTST_MASK | 0 ); + + RegVal = ((0x00000013U << SATA_AHCI_VENDOR_PP4C_BMX_SHIFT + | 0x00000008U << SATA_AHCI_VENDOR_PP4C_BNM_SHIFT + | 0x0000004AU << SATA_AHCI_VENDOR_PP4C_SFD_SHIFT + | 0x00000006U << SATA_AHCI_VENDOR_PP4C_PTST_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP4C_OFFSET ,0xFFFFFFFFU ,0x064A0813U); + /*############################################################################################################################ */ + + /*Register : PP5C @ 0XFD0C00B8

+ + RIT: Retry Interval Timer. The calculated value divided by two, the lower digit of precision is not needed. + PSU_SATA_AHCI_VENDOR_PP5C_RIT 0xC96A4 + + RCT: Rate Change Timer, a value based on the 54.2us for which a SATA device will transmit at a fixed rate ALIGNp after OOB ha + completed, for a fast SERDES it is suggested that this value be 54.2us / 4 + PSU_SATA_AHCI_VENDOR_PP5C_RCT 0x3FF + + PP5C - Port Phy5Cfg Register. This register controls the configuration of the Phy Control Retry Interval timing for either Po + t 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register. + (OFFSET, MASK, VALUE) (0XFD0C00B8, 0xFFFFFFFFU ,0x3FFC96A4U) + RegMask = (SATA_AHCI_VENDOR_PP5C_RIT_MASK | SATA_AHCI_VENDOR_PP5C_RCT_MASK | 0 ); + + RegVal = ((0x000C96A4U << SATA_AHCI_VENDOR_PP5C_RIT_SHIFT + | 0x000003FFU << SATA_AHCI_VENDOR_PP5C_RCT_SHIFT + | 0 ) & RegMask); */ + PSU_Mask_Write (SATA_AHCI_VENDOR_PP5C_OFFSET ,0xFFFFFFFFU ,0x3FFC96A4U); + /*############################################################################################################################ */ + return 1; } @@ -19115,12 +20800,23 @@ unsigned long psu_ddr_phybringup_data() { unsigned int regval = 0; - Xil_Out32(0xFD090000U, 0x0000A845U); - Xil_Out32(0xFD090004U, 0x003FFFFFU); - Xil_Out32(0xFD09000CU, 0x00000010U); - Xil_Out32(0xFD090010U, 0x00000010U); + int dpll_divisor; + dpll_divisor = (Xil_In32(0xFD1A0080U) & 0x00003F00U) >> 0x00000008U; + prog_reg (0xFD1A0080U, 0x00003F00U, 0x00000008U, 0x00000005U); + prog_reg (0xFD080028U, 0x00000001U, 0x00000000U, 0x00000001U); + Xil_Out32(0xFD080004U, 0x00040003U); + while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U); + prog_reg (0xFD080684U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD0806A4U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD0806C4U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD0806E4U, 0x06000000U, 0x00000019U, 0x00000001U); + prog_reg (0xFD1A0080, 0x3F00, 0x8, dpll_divisor); + Xil_Out32(0xFD080004U, 0x40040071U); + while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U); + Xil_Out32(0xFD080004U, 0x40040001U); + while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U); // PHY BRINGUP SEQ - while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000000FU); + while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU); prog_reg (0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); //poll for PHY initialization to complete while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU); @@ -19137,14 +20833,14 @@ unsigned long psu_ddr_phybringup_data() { // Run Vref training in static read mode - Xil_Out32(0xFD080200U, 0x110011C7U); + Xil_Out32(0xFD080200U, 0x100091C7U); Xil_Out32(0xFD080018U, 0x00F01EF2U); - Xil_Out32(0xFD08001CU, 0x55AA0098U); - Xil_Out32(0xFD08142CU, 0x00001830U); - Xil_Out32(0xFD08146CU, 0x00001830U); - Xil_Out32(0xFD0814ACU, 0x00001830U); - Xil_Out32(0xFD0814ECU, 0x00001830U); - Xil_Out32(0xFD08152CU, 0x00001830U); + Xil_Out32(0xFD08001CU, 0x55AA5498U); + Xil_Out32(0xFD08142CU, 0x00041830U); + Xil_Out32(0xFD08146CU, 0x00041830U); + Xil_Out32(0xFD0814ACU, 0x00041830U); + Xil_Out32(0xFD0814ECU, 0x00041830U); + Xil_Out32(0xFD08152CU, 0x00041830U); Xil_Out32(0xFD080004, 0x00060001); //PUB_PIR @@ -19154,14 +20850,22 @@ unsigned long psu_ddr_phybringup_data() { } // Vref training is complete, disabling static read mode - Xil_Out32(0xFD080200U, 0x810011C7U); + Xil_Out32(0xFD080200U, 0x800091C7U); Xil_Out32(0xFD080018U, 0x00F12302U); - Xil_Out32(0xFD08001CU, 0x55AA0080U); - Xil_Out32(0xFD08142CU, 0x00001800U); - Xil_Out32(0xFD08146CU, 0x00001800U); - Xil_Out32(0xFD0814ACU, 0x00001800U); - Xil_Out32(0xFD0814ECU, 0x00001800U); - Xil_Out32(0xFD08152CU, 0x00001800U); + Xil_Out32(0xFD08001CU, 0x55AA5480U); + Xil_Out32(0xFD08142CU, 0x00041800U); + Xil_Out32(0xFD08146CU, 0x00041800U); + Xil_Out32(0xFD0814ACU, 0x00041800U); + Xil_Out32(0xFD0814ECU, 0x00041800U); + Xil_Out32(0xFD08152CU, 0x00041800U); + + + Xil_Out32(0xFD080004, 0x0000C001); //PUB_PIR + regval = Xil_In32(0xFD080030); //PUB_PGSR0 + while((regval & 0x80000C01) != 0x80000C01){ + regval = Xil_In32(0xFD080030); //PUB_PGSR0 + } + Xil_Out32(0xFD070180U, 0x01000040U); Xil_Out32(0xFD070060U, 0x00000000U); prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U); @@ -19191,7 +20895,7 @@ return 1; int mask_pollOnValue(u32 add , u32 mask, u32 value ) { - volatile u32 *addr = (volatile u32*) add; + volatile u32 *addr = (volatile u32*)(unsigned long) add; int i = 0; while ((*addr & mask)!= value) { if (i == PSU_MASK_POLL_TIME) { @@ -19204,7 +20908,7 @@ int mask_pollOnValue(u32 add , u32 mask, u32 value ) { } int mask_poll(u32 add , u32 mask) { - volatile u32 *addr = (volatile u32*) add; + volatile u32 *addr = (volatile u32*)(unsigned long) add; int i = 0; while (!(*addr & mask)) { if (i == PSU_MASK_POLL_TIME) { @@ -19221,7 +20925,7 @@ void mask_delay(u32 delay) { } u32 mask_read(u32 add , u32 mask ) { - volatile u32 *addr = (volatile u32*) add; + volatile u32 *addr = (volatile u32*)(unsigned long) add; u32 val = (*addr & mask); //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val); return val; @@ -19333,6 +21037,58 @@ void init_peripheral() tmp_regval &= ~0x00000001; Xil_Out32(0xFD690030, tmp_regval); } + +int psu_init_xppu_aper_ram() { + unsigned long APER_OFFSET = 0xFF981000; + int i = 0; + for (; i <= 400; i++) { + PSU_Mask_Write (APER_OFFSET ,0xF80FFFFFU ,0x08080000U); + APER_OFFSET = APER_OFFSET + 0x4; + } + + return 0; +} + +int psu_lpd_protection() { + psu_init_xppu_aper_ram(); + psu_lpd_xppu_data(); + return 0; +} + +int psu_ddr_protection() { + psu_ddr_xmpu0_data(); + psu_ddr_xmpu1_data(); + psu_ddr_xmpu2_data(); + psu_ddr_xmpu3_data(); + psu_ddr_xmpu4_data(); + psu_ddr_xmpu5_data(); + return 0; +} +int psu_ocm_protection() { + psu_ocm_xmpu_data(); + return 0; +} + +int psu_fpd_protection() { + psu_fpd_xmpu_data(); + return 0; +} + +int psu_protection_lock() { + psu_protection_lock_data(); + return 0; +} + +int psu_protection() { + psu_ddr_protection(); + psu_ocm_protection(); + psu_fpd_protection(); + psu_lpd_protection(); + return 0; +} + + + int psu_init() { diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.h b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.h index ae33f880c..0fb578181 100644 --- a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.h +++ b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/psu_init_gpl.h @@ -772,26 +772,14 @@ #define CRF_APB_VPLL_FRAC_CFG_DATA_DEFVAL 0x00000000 #define CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT 0 #define CRF_APB_VPLL_FRAC_CFG_DATA_MASK 0x0000FFFFU -#undef CRL_APB_GEM0_REF_CTRL_OFFSET -#define CRL_APB_GEM0_REF_CTRL_OFFSET 0XFF5E0050 -#undef CRL_APB_GEM1_REF_CTRL_OFFSET -#define CRL_APB_GEM1_REF_CTRL_OFFSET 0XFF5E0054 -#undef CRL_APB_GEM2_REF_CTRL_OFFSET -#define CRL_APB_GEM2_REF_CTRL_OFFSET 0XFF5E0058 #undef CRL_APB_GEM3_REF_CTRL_OFFSET #define CRL_APB_GEM3_REF_CTRL_OFFSET 0XFF5E005C -#undef CRL_APB_GEM_TSU_REF_CTRL_OFFSET -#define CRL_APB_GEM_TSU_REF_CTRL_OFFSET 0XFF5E0100 #undef CRL_APB_USB0_BUS_REF_CTRL_OFFSET #define CRL_APB_USB0_BUS_REF_CTRL_OFFSET 0XFF5E0060 -#undef CRL_APB_USB1_BUS_REF_CTRL_OFFSET -#define CRL_APB_USB1_BUS_REF_CTRL_OFFSET 0XFF5E0064 #undef CRL_APB_USB3_DUAL_REF_CTRL_OFFSET #define CRL_APB_USB3_DUAL_REF_CTRL_OFFSET 0XFF5E004C #undef CRL_APB_QSPI_REF_CTRL_OFFSET #define CRL_APB_QSPI_REF_CTRL_OFFSET 0XFF5E0068 -#undef CRL_APB_SDIO0_REF_CTRL_OFFSET -#define CRL_APB_SDIO0_REF_CTRL_OFFSET 0XFF5E006C #undef CRL_APB_SDIO1_REF_CTRL_OFFSET #define CRL_APB_SDIO1_REF_CTRL_OFFSET 0XFF5E0070 #undef IOU_SLCR_SDIO_CLK_CTRL_OFFSET @@ -804,20 +792,12 @@ #define CRL_APB_I2C0_REF_CTRL_OFFSET 0XFF5E0120 #undef CRL_APB_I2C1_REF_CTRL_OFFSET #define CRL_APB_I2C1_REF_CTRL_OFFSET 0XFF5E0124 -#undef CRL_APB_SPI0_REF_CTRL_OFFSET -#define CRL_APB_SPI0_REF_CTRL_OFFSET 0XFF5E007C -#undef CRL_APB_SPI1_REF_CTRL_OFFSET -#define CRL_APB_SPI1_REF_CTRL_OFFSET 0XFF5E0080 -#undef CRL_APB_CAN0_REF_CTRL_OFFSET -#define CRL_APB_CAN0_REF_CTRL_OFFSET 0XFF5E0084 #undef CRL_APB_CAN1_REF_CTRL_OFFSET #define CRL_APB_CAN1_REF_CTRL_OFFSET 0XFF5E0088 #undef CRL_APB_CPU_R5_CTRL_OFFSET #define CRL_APB_CPU_R5_CTRL_OFFSET 0XFF5E0090 #undef CRL_APB_IOU_SWITCH_CTRL_OFFSET #define CRL_APB_IOU_SWITCH_CTRL_OFFSET 0XFF5E009C -#undef CRL_APB_CSU_PLL_CTRL_OFFSET -#define CRL_APB_CSU_PLL_CTRL_OFFSET 0XFF5E00A0 #undef CRL_APB_PCAP_CTRL_OFFSET #define CRL_APB_PCAP_CTRL_OFFSET 0XFF5E00A4 #undef CRL_APB_LPD_SWITCH_CTRL_OFFSET @@ -826,8 +806,6 @@ #define CRL_APB_LPD_LSBUS_CTRL_OFFSET 0XFF5E00AC #undef CRL_APB_DBG_LPD_CTRL_OFFSET #define CRL_APB_DBG_LPD_CTRL_OFFSET 0XFF5E00B0 -#undef CRL_APB_NAND_REF_CTRL_OFFSET -#define CRL_APB_NAND_REF_CTRL_OFFSET 0XFF5E00B4 #undef CRL_APB_ADMA_REF_CTRL_OFFSET #define CRL_APB_ADMA_REF_CTRL_OFFSET 0XFF5E00B8 #undef CRL_APB_PL0_REF_CTRL_OFFSET @@ -872,8 +850,6 @@ #define CRF_APB_TOPSW_MAIN_CTRL_OFFSET 0XFD1A00C0 #undef CRF_APB_TOPSW_LSBUS_CTRL_OFFSET #define CRF_APB_TOPSW_LSBUS_CTRL_OFFSET 0XFD1A00C4 -#undef CRF_APB_GTGREF0_REF_CTRL_OFFSET -#define CRF_APB_GTGREF0_REF_CTRL_OFFSET 0XFD1A00C8 #undef CRF_APB_DBG_TSTMP_CTRL_OFFSET #define CRF_APB_DBG_TSTMP_CTRL_OFFSET 0XFD1A00F8 #undef IOU_SLCR_IOU_TTC_APB_CLK_OFFSET @@ -885,129 +861,6 @@ #undef LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET #define LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET 0XFF410050 -/*Clock active for the RX channel*/ -#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK -#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_SHIFT 26 -#define CRL_APB_GEM0_REF_CTRL_RX_CLKACT_MASK 0x04000000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM0_REF_CTRL_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_GEM0_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM0_REF_CTRL_SRCSEL_DEFVAL 0x00002500 -#define CRL_APB_GEM0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM0_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active for the RX channel*/ -#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK -#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_SHIFT 26 -#define CRL_APB_GEM1_REF_CTRL_RX_CLKACT_MASK 0x04000000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM1_REF_CTRL_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_GEM1_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM1_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM1_REF_CTRL_SRCSEL_DEFVAL 0x00002500 -#define CRL_APB_GEM1_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM1_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active for the RX channel*/ -#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK -#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_SHIFT 26 -#define CRL_APB_GEM2_REF_CTRL_RX_CLKACT_MASK 0x04000000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM2_REF_CTRL_CLKACT_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_GEM2_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM2_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM2_REF_CTRL_SRCSEL_DEFVAL 0x00002500 -#define CRL_APB_GEM2_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM2_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active for the RX channel*/ #undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_DEFVAL #undef CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT @@ -1049,39 +902,6 @@ #define CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK 0x00000007U -/*6 bit divider*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_GEM_TSU_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*6 bit divider*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_GEM_TSU_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK -#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_DEFVAL 0x00051000 -#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_GEM_TSU_REF_CTRL_CLKACT_MASK 0x01000000U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT @@ -1115,39 +935,6 @@ #define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_SHIFT 25 -#define CRL_APB_USB1_BUS_REF_CTRL_CLKACT_MASK 0x02000000U - -/*6 bit divider*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_USB1_BUS_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK -#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_DEFVAL 0x00052000 -#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_USB1_BUS_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT @@ -1214,39 +1001,6 @@ #define CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK -#define CRL_APB_SDIO0_REF_CTRL_CLKACT_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_SDIO0_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_SDIO0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_DEFVAL 0x01000F00 -#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_SDIO0_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_SDIO1_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT @@ -1420,105 +1174,6 @@ #define CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_CLKACT_MASK -#define CRL_APB_SPI0_REF_CTRL_CLKACT_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_SPI0_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_SPI0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_SPI0_REF_CTRL_SRCSEL_DEFVAL 0x01001800 -#define CRL_APB_SPI0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_SPI0_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_CLKACT_MASK -#define CRL_APB_SPI1_REF_CTRL_CLKACT_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_SPI1_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_SPI1_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK -#define CRL_APB_SPI1_REF_CTRL_SRCSEL_DEFVAL 0x01001800 -#define CRL_APB_SPI1_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_SPI1_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_CLKACT_MASK -#define CRL_APB_CAN0_REF_CTRL_CLKACT_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_CAN0_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_CAN0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK -#define CRL_APB_CAN0_REF_CTRL_SRCSEL_DEFVAL 0x01001800 -#define CRL_APB_CAN0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_CAN0_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_CAN1_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT @@ -1603,31 +1258,6 @@ #define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL -#undef CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT -#undef CRL_APB_CSU_PLL_CTRL_CLKACT_MASK -#define CRL_APB_CSU_PLL_CTRL_CLKACT_DEFVAL 0x01001500 -#define CRL_APB_CSU_PLL_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_CSU_PLL_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK -#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_DEFVAL 0x01001500 -#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_CSU_PLL_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT -#undef CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK -#define CRL_APB_CSU_PLL_CTRL_SRCSEL_DEFVAL 0x01001500 -#define CRL_APB_CSU_PLL_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_CSU_PLL_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_PCAP_CTRL_CLKACT_DEFVAL #undef CRL_APB_PCAP_CTRL_CLKACT_SHIFT @@ -1728,39 +1358,6 @@ #define CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT 0 #define CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK 0x00000007U -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT -#undef CRL_APB_NAND_REF_CTRL_CLKACT_MASK -#define CRL_APB_NAND_REF_CTRL_CLKACT_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_CLKACT_SHIFT 24 -#define CRL_APB_NAND_REF_CTRL_CLKACT_MASK 0x01000000U - -/*6 bit divider*/ -#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT -#undef CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK -#define CRL_APB_NAND_REF_CTRL_DIVISOR1_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_DIVISOR1_SHIFT 16 -#define CRL_APB_NAND_REF_CTRL_DIVISOR1_MASK 0x003F0000U - -/*6 bit divider*/ -#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT -#undef CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK -#define CRL_APB_NAND_REF_CTRL_DIVISOR0_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRL_APB_NAND_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new - clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL -#undef CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT -#undef CRL_APB_NAND_REF_CTRL_SRCSEL_MASK -#define CRL_APB_NAND_REF_CTRL_SRCSEL_DEFVAL 0x00052000 -#define CRL_APB_NAND_REF_CTRL_SRCSEL_SHIFT 0 -#define CRL_APB_NAND_REF_CTRL_SRCSEL_MASK 0x00000007U - /*Clock active signal. Switch to 0 to disable the clock*/ #undef CRL_APB_ADMA_REF_CTRL_CLKACT_DEFVAL #undef CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT @@ -2376,31 +1973,6 @@ #define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT 24 #define CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK 0x01000000U -/*6 bit divider*/ -#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL -#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT -#undef CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK -#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_DEFVAL 0x00000800 -#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_SHIFT 8 -#define CRF_APB_GTGREF0_REF_CTRL_DIVISOR0_MASK 0x00003F00U - -/*000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of - he new clock. This is not usually an issue, but designers must be aware.)*/ -#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL -#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT -#undef CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK -#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_DEFVAL 0x00000800 -#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_SHIFT 0 -#define CRF_APB_GTGREF0_REF_CTRL_SRCSEL_MASK 0x00000007U - -/*Clock active signal. Switch to 0 to disable the clock*/ -#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL -#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT -#undef CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK -#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_DEFVAL 0x00000800 -#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_SHIFT 24 -#define CRF_APB_GTGREF0_REF_CTRL_CLKACT_MASK 0x01000000U - /*6 bit divider*/ #undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_DEFVAL #undef CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT @@ -2702,6 +2274,8 @@ #define DDR_PHY_PGCR0_OFFSET 0XFD080010 #undef DDR_PHY_PGCR2_OFFSET #define DDR_PHY_PGCR2_OFFSET 0XFD080018 +#undef DDR_PHY_PGCR3_OFFSET +#define DDR_PHY_PGCR3_OFFSET 0XFD08001C #undef DDR_PHY_PGCR5_OFFSET #define DDR_PHY_PGCR5_OFFSET 0XFD080024 #undef DDR_PHY_PTR0_OFFSET @@ -2730,6 +2304,8 @@ #define DDR_PHY_RDIMMGCR0_OFFSET 0XFD080140 #undef DDR_PHY_RDIMMGCR1_OFFSET #define DDR_PHY_RDIMMGCR1_OFFSET 0XFD080144 +#undef DDR_PHY_RDIMMCR0_OFFSET +#define DDR_PHY_RDIMMCR0_OFFSET 0XFD080150 #undef DDR_PHY_RDIMMCR1_OFFSET #define DDR_PHY_RDIMMCR1_OFFSET 0XFD080154 #undef DDR_PHY_MR0_OFFSET @@ -2762,6 +2338,8 @@ #define DDR_PHY_DTCR1_OFFSET 0XFD080204 #undef DDR_PHY_CATR0_OFFSET #define DDR_PHY_CATR0_OFFSET 0XFD080240 +#undef DDR_PHY_BISTLSR_OFFSET +#define DDR_PHY_BISTLSR_OFFSET 0XFD080414 #undef DDR_PHY_RIOCR5_OFFSET #define DDR_PHY_RIOCR5_OFFSET 0XFD0804F4 #undef DDR_PHY_ACIOCR0_OFFSET @@ -2778,12 +2356,18 @@ #define DDR_PHY_VTCR0_OFFSET 0XFD080528 #undef DDR_PHY_VTCR1_OFFSET #define DDR_PHY_VTCR1_OFFSET 0XFD08052C +#undef DDR_PHY_ACBDLR1_OFFSET +#define DDR_PHY_ACBDLR1_OFFSET 0XFD080544 +#undef DDR_PHY_ACBDLR2_OFFSET +#define DDR_PHY_ACBDLR2_OFFSET 0XFD080548 #undef DDR_PHY_ACBDLR6_OFFSET #define DDR_PHY_ACBDLR6_OFFSET 0XFD080558 #undef DDR_PHY_ACBDLR7_OFFSET #define DDR_PHY_ACBDLR7_OFFSET 0XFD08055C #undef DDR_PHY_ACBDLR8_OFFSET #define DDR_PHY_ACBDLR8_OFFSET 0XFD080560 +#undef DDR_PHY_ACBDLR9_OFFSET +#define DDR_PHY_ACBDLR9_OFFSET 0XFD080564 #undef DDR_PHY_ZQCR_OFFSET #define DDR_PHY_ZQCR_OFFSET 0XFD080680 #undef DDR_PHY_ZQ0PR0_OFFSET @@ -2916,30 +2500,40 @@ #define DDR_PHY_DX8LCDLR2_OFFSET 0XFD080F88 #undef DDR_PHY_DX8GTR0_OFFSET #define DDR_PHY_DX8GTR0_OFFSET 0XFD080FC0 +#undef DDR_PHY_DX8SL0OSC_OFFSET +#define DDR_PHY_DX8SL0OSC_OFFSET 0XFD081400 #undef DDR_PHY_DX8SL0DQSCTL_OFFSET #define DDR_PHY_DX8SL0DQSCTL_OFFSET 0XFD08141C #undef DDR_PHY_DX8SL0DXCTL2_OFFSET #define DDR_PHY_DX8SL0DXCTL2_OFFSET 0XFD08142C #undef DDR_PHY_DX8SL0IOCR_OFFSET #define DDR_PHY_DX8SL0IOCR_OFFSET 0XFD081430 +#undef DDR_PHY_DX8SL1OSC_OFFSET +#define DDR_PHY_DX8SL1OSC_OFFSET 0XFD081440 #undef DDR_PHY_DX8SL1DQSCTL_OFFSET #define DDR_PHY_DX8SL1DQSCTL_OFFSET 0XFD08145C #undef DDR_PHY_DX8SL1DXCTL2_OFFSET #define DDR_PHY_DX8SL1DXCTL2_OFFSET 0XFD08146C #undef DDR_PHY_DX8SL1IOCR_OFFSET #define DDR_PHY_DX8SL1IOCR_OFFSET 0XFD081470 +#undef DDR_PHY_DX8SL2OSC_OFFSET +#define DDR_PHY_DX8SL2OSC_OFFSET 0XFD081480 #undef DDR_PHY_DX8SL2DQSCTL_OFFSET #define DDR_PHY_DX8SL2DQSCTL_OFFSET 0XFD08149C #undef DDR_PHY_DX8SL2DXCTL2_OFFSET #define DDR_PHY_DX8SL2DXCTL2_OFFSET 0XFD0814AC #undef DDR_PHY_DX8SL2IOCR_OFFSET #define DDR_PHY_DX8SL2IOCR_OFFSET 0XFD0814B0 +#undef DDR_PHY_DX8SL3OSC_OFFSET +#define DDR_PHY_DX8SL3OSC_OFFSET 0XFD0814C0 #undef DDR_PHY_DX8SL3DQSCTL_OFFSET #define DDR_PHY_DX8SL3DQSCTL_OFFSET 0XFD0814DC #undef DDR_PHY_DX8SL3DXCTL2_OFFSET #define DDR_PHY_DX8SL3DXCTL2_OFFSET 0XFD0814EC #undef DDR_PHY_DX8SL3IOCR_OFFSET #define DDR_PHY_DX8SL3IOCR_OFFSET 0XFD0814F0 +#undef DDR_PHY_DX8SL4OSC_OFFSET +#define DDR_PHY_DX8SL4OSC_OFFSET 0XFD081500 #undef DDR_PHY_DX8SL4DQSCTL_OFFSET #define DDR_PHY_DX8SL4DQSCTL_OFFSET 0XFD08151C #undef DDR_PHY_DX8SL4DXCTL2_OFFSET @@ -6664,6 +6258,102 @@ #define DDR_PHY_PGCR2_TREFPRD_SHIFT 0 #define DDR_PHY_PGCR2_TREFPRD_MASK 0x0003FFFFU +/*CKN Enable*/ +#undef DDR_PHY_PGCR3_CKNEN_DEFVAL +#undef DDR_PHY_PGCR3_CKNEN_SHIFT +#undef DDR_PHY_PGCR3_CKNEN_MASK +#define DDR_PHY_PGCR3_CKNEN_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_CKNEN_SHIFT 24 +#define DDR_PHY_PGCR3_CKNEN_MASK 0xFF000000U + +/*CK Enable*/ +#undef DDR_PHY_PGCR3_CKEN_DEFVAL +#undef DDR_PHY_PGCR3_CKEN_SHIFT +#undef DDR_PHY_PGCR3_CKEN_MASK +#define DDR_PHY_PGCR3_CKEN_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_CKEN_SHIFT 16 +#define DDR_PHY_PGCR3_CKEN_MASK 0x00FF0000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_PGCR3_RESERVED_15_DEFVAL +#undef DDR_PHY_PGCR3_RESERVED_15_SHIFT +#undef DDR_PHY_PGCR3_RESERVED_15_MASK +#define DDR_PHY_PGCR3_RESERVED_15_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_RESERVED_15_SHIFT 15 +#define DDR_PHY_PGCR3_RESERVED_15_MASK 0x00008000U + +/*Enable Clock Gating for AC [0] ctl_rd_clk*/ +#undef DDR_PHY_PGCR3_GATEACRDCLK_DEFVAL +#undef DDR_PHY_PGCR3_GATEACRDCLK_SHIFT +#undef DDR_PHY_PGCR3_GATEACRDCLK_MASK +#define DDR_PHY_PGCR3_GATEACRDCLK_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_GATEACRDCLK_SHIFT 13 +#define DDR_PHY_PGCR3_GATEACRDCLK_MASK 0x00006000U + +/*Enable Clock Gating for AC [0] ddr_clk*/ +#undef DDR_PHY_PGCR3_GATEACDDRCLK_DEFVAL +#undef DDR_PHY_PGCR3_GATEACDDRCLK_SHIFT +#undef DDR_PHY_PGCR3_GATEACDDRCLK_MASK +#define DDR_PHY_PGCR3_GATEACDDRCLK_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_GATEACDDRCLK_SHIFT 11 +#define DDR_PHY_PGCR3_GATEACDDRCLK_MASK 0x00001800U + +/*Enable Clock Gating for AC [0] ctl_clk*/ +#undef DDR_PHY_PGCR3_GATEACCTLCLK_DEFVAL +#undef DDR_PHY_PGCR3_GATEACCTLCLK_SHIFT +#undef DDR_PHY_PGCR3_GATEACCTLCLK_MASK +#define DDR_PHY_PGCR3_GATEACCTLCLK_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_GATEACCTLCLK_SHIFT 9 +#define DDR_PHY_PGCR3_GATEACCTLCLK_MASK 0x00000600U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_PGCR3_RESERVED_8_DEFVAL +#undef DDR_PHY_PGCR3_RESERVED_8_SHIFT +#undef DDR_PHY_PGCR3_RESERVED_8_MASK +#define DDR_PHY_PGCR3_RESERVED_8_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_RESERVED_8_SHIFT 8 +#define DDR_PHY_PGCR3_RESERVED_8_MASK 0x00000100U + +/*Controls DDL Bypass Modes*/ +#undef DDR_PHY_PGCR3_DDLBYPMODE_DEFVAL +#undef DDR_PHY_PGCR3_DDLBYPMODE_SHIFT +#undef DDR_PHY_PGCR3_DDLBYPMODE_MASK +#define DDR_PHY_PGCR3_DDLBYPMODE_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_DDLBYPMODE_SHIFT 6 +#define DDR_PHY_PGCR3_DDLBYPMODE_MASK 0x000000C0U + +/*IO Loop-Back Select*/ +#undef DDR_PHY_PGCR3_IOLB_DEFVAL +#undef DDR_PHY_PGCR3_IOLB_SHIFT +#undef DDR_PHY_PGCR3_IOLB_MASK +#define DDR_PHY_PGCR3_IOLB_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_IOLB_SHIFT 5 +#define DDR_PHY_PGCR3_IOLB_MASK 0x00000020U + +/*AC Receive FIFO Read Mode*/ +#undef DDR_PHY_PGCR3_RDMODE_DEFVAL +#undef DDR_PHY_PGCR3_RDMODE_SHIFT +#undef DDR_PHY_PGCR3_RDMODE_MASK +#define DDR_PHY_PGCR3_RDMODE_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_RDMODE_SHIFT 3 +#define DDR_PHY_PGCR3_RDMODE_MASK 0x00000018U + +/*Read FIFO Reset Disable*/ +#undef DDR_PHY_PGCR3_DISRST_DEFVAL +#undef DDR_PHY_PGCR3_DISRST_SHIFT +#undef DDR_PHY_PGCR3_DISRST_MASK +#define DDR_PHY_PGCR3_DISRST_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_DISRST_SHIFT 2 +#define DDR_PHY_PGCR3_DISRST_MASK 0x00000004U + +/*Clock Level when Clock Gating*/ +#undef DDR_PHY_PGCR3_CLKLEVEL_DEFVAL +#undef DDR_PHY_PGCR3_CLKLEVEL_SHIFT +#undef DDR_PHY_PGCR3_CLKLEVEL_MASK +#define DDR_PHY_PGCR3_CLKLEVEL_DEFVAL 0x55AA0080 +#define DDR_PHY_PGCR3_CLKLEVEL_SHIFT 0 +#define DDR_PHY_PGCR3_CLKLEVEL_MASK 0x00000003U + /*Frequency B Ratio Term*/ #undef DDR_PHY_PGCR5_FRQBT_DEFVAL #undef DDR_PHY_PGCR5_FRQBT_SHIFT @@ -7673,6 +7363,72 @@ #define DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT 0 #define DDR_PHY_RDIMMGCR1_TBCSTAB_MASK 0x00003FFFU +/*DDR4/DDR3 Control Word 7*/ +#undef DDR_PHY_RDIMMCR0_RC7_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC7_SHIFT +#undef DDR_PHY_RDIMMCR0_RC7_MASK +#define DDR_PHY_RDIMMCR0_RC7_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC7_SHIFT 28 +#define DDR_PHY_RDIMMCR0_RC7_MASK 0xF0000000U + +/*DDR4 Control Word 6 (Comman space Control Word) / DDR3 Reserved*/ +#undef DDR_PHY_RDIMMCR0_RC6_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC6_SHIFT +#undef DDR_PHY_RDIMMCR0_RC6_MASK +#define DDR_PHY_RDIMMCR0_RC6_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC6_SHIFT 24 +#define DDR_PHY_RDIMMCR0_RC6_MASK 0x0F000000U + +/*DDR4/DDR3 Control Word 5 (CK Driver Characteristics Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC5_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC5_SHIFT +#undef DDR_PHY_RDIMMCR0_RC5_MASK +#define DDR_PHY_RDIMMCR0_RC5_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC5_SHIFT 20 +#define DDR_PHY_RDIMMCR0_RC5_MASK 0x00F00000U + +/*DDR4 Control Word 4 (ODT and CKE Signals Driver Characteristics Control Word) / DDR3 Control Word 4 (Control Signals Driver C + aracteristics Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC4_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC4_SHIFT +#undef DDR_PHY_RDIMMCR0_RC4_MASK +#define DDR_PHY_RDIMMCR0_RC4_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC4_SHIFT 16 +#define DDR_PHY_RDIMMCR0_RC4_MASK 0x000F0000U + +/*DDR4 Control Word 3 (CA and CS Signals Driver Characteristics Control Word) / DDR3 Control Word 3 (Command/Address Signals Dr + ver Characteristrics Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC3_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC3_SHIFT +#undef DDR_PHY_RDIMMCR0_RC3_MASK +#define DDR_PHY_RDIMMCR0_RC3_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC3_SHIFT 12 +#define DDR_PHY_RDIMMCR0_RC3_MASK 0x0000F000U + +/*DDR4 Control Word 2 (Timing and IBT Control Word) / DDR3 Control Word 2 (Timing Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC2_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC2_SHIFT +#undef DDR_PHY_RDIMMCR0_RC2_MASK +#define DDR_PHY_RDIMMCR0_RC2_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC2_SHIFT 8 +#define DDR_PHY_RDIMMCR0_RC2_MASK 0x00000F00U + +/*DDR4/DDR3 Control Word 1 (Clock Driver Enable Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC1_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC1_SHIFT +#undef DDR_PHY_RDIMMCR0_RC1_MASK +#define DDR_PHY_RDIMMCR0_RC1_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC1_SHIFT 4 +#define DDR_PHY_RDIMMCR0_RC1_MASK 0x000000F0U + +/*DDR4/DDR3 Control Word 0 (Global Features Control Word)*/ +#undef DDR_PHY_RDIMMCR0_RC0_DEFVAL +#undef DDR_PHY_RDIMMCR0_RC0_SHIFT +#undef DDR_PHY_RDIMMCR0_RC0_MASK +#define DDR_PHY_RDIMMCR0_RC0_DEFVAL 0x00000000 +#define DDR_PHY_RDIMMCR0_RC0_SHIFT 0 +#define DDR_PHY_RDIMMCR0_RC0_MASK 0x0000000FU + /*Control Word 15*/ #undef DDR_PHY_RDIMMCR1_RC15_DEFVAL #undef DDR_PHY_RDIMMCR1_RC15_SHIFT @@ -8660,6 +8416,14 @@ #define DDR_PHY_CATR0_CA1BYTE0_SHIFT 0 #define DDR_PHY_CATR0_CA1BYTE0_MASK 0x0000000FU +/*LFSR seed for pseudo-random BIST patterns*/ +#undef DDR_PHY_BISTLSR_SEED_DEFVAL +#undef DDR_PHY_BISTLSR_SEED_SHIFT +#undef DDR_PHY_BISTLSR_SEED_MASK +#define DDR_PHY_BISTLSR_SEED_DEFVAL +#define DDR_PHY_BISTLSR_SEED_SHIFT 0 +#define DDR_PHY_BISTLSR_SEED_MASK 0xFFFFFFFFU + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_RIOCR5_RESERVED_31_16_DEFVAL #undef DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT @@ -9220,6 +8984,134 @@ #define DDR_PHY_VTCR1_HVIO_SHIFT 0 #define DDR_PHY_VTCR1_HVIO_MASK 0x00000001U +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_31_30_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_31_30_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_31_30_MASK +#define DDR_PHY_ACBDLR1_RESERVED_31_30_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_ACBDLR1_RESERVED_31_30_MASK 0xC0000000U + +/*Delay select for the BDL on Parity.*/ +#undef DDR_PHY_ACBDLR1_PARBD_DEFVAL +#undef DDR_PHY_ACBDLR1_PARBD_SHIFT +#undef DDR_PHY_ACBDLR1_PARBD_MASK +#define DDR_PHY_ACBDLR1_PARBD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_PARBD_SHIFT 24 +#define DDR_PHY_ACBDLR1_PARBD_MASK 0x3F000000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_23_22_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_23_22_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_23_22_MASK +#define DDR_PHY_ACBDLR1_RESERVED_23_22_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_23_22_SHIFT 22 +#define DDR_PHY_ACBDLR1_RESERVED_23_22_MASK 0x00C00000U + +/*Delay select for the BDL on Address A[16]. In DDR3 mode this pin is connected to WE.*/ +#undef DDR_PHY_ACBDLR1_A16BD_DEFVAL +#undef DDR_PHY_ACBDLR1_A16BD_SHIFT +#undef DDR_PHY_ACBDLR1_A16BD_MASK +#define DDR_PHY_ACBDLR1_A16BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_A16BD_SHIFT 16 +#define DDR_PHY_ACBDLR1_A16BD_MASK 0x003F0000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_15_14_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_15_14_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_15_14_MASK +#define DDR_PHY_ACBDLR1_RESERVED_15_14_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_15_14_SHIFT 14 +#define DDR_PHY_ACBDLR1_RESERVED_15_14_MASK 0x0000C000U + +/*Delay select for the BDL on Address A[17]. When not in DDR4 modemode this pin is connected to CAS.*/ +#undef DDR_PHY_ACBDLR1_A17BD_DEFVAL +#undef DDR_PHY_ACBDLR1_A17BD_SHIFT +#undef DDR_PHY_ACBDLR1_A17BD_MASK +#define DDR_PHY_ACBDLR1_A17BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_A17BD_SHIFT 8 +#define DDR_PHY_ACBDLR1_A17BD_MASK 0x00003F00U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR1_RESERVED_7_6_DEFVAL +#undef DDR_PHY_ACBDLR1_RESERVED_7_6_SHIFT +#undef DDR_PHY_ACBDLR1_RESERVED_7_6_MASK +#define DDR_PHY_ACBDLR1_RESERVED_7_6_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_RESERVED_7_6_SHIFT 6 +#define DDR_PHY_ACBDLR1_RESERVED_7_6_MASK 0x000000C0U + +/*Delay select for the BDL on ACTN.*/ +#undef DDR_PHY_ACBDLR1_ACTBD_DEFVAL +#undef DDR_PHY_ACBDLR1_ACTBD_SHIFT +#undef DDR_PHY_ACBDLR1_ACTBD_MASK +#define DDR_PHY_ACBDLR1_ACTBD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR1_ACTBD_SHIFT 0 +#define DDR_PHY_ACBDLR1_ACTBD_MASK 0x0000003FU + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_31_30_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_31_30_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_31_30_MASK +#define DDR_PHY_ACBDLR2_RESERVED_31_30_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_ACBDLR2_RESERVED_31_30_MASK 0xC0000000U + +/*Delay select for the BDL on BG[1].*/ +#undef DDR_PHY_ACBDLR2_BG1BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BG1BD_SHIFT +#undef DDR_PHY_ACBDLR2_BG1BD_MASK +#define DDR_PHY_ACBDLR2_BG1BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BG1BD_SHIFT 24 +#define DDR_PHY_ACBDLR2_BG1BD_MASK 0x3F000000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_23_22_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_23_22_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_23_22_MASK +#define DDR_PHY_ACBDLR2_RESERVED_23_22_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_23_22_SHIFT 22 +#define DDR_PHY_ACBDLR2_RESERVED_23_22_MASK 0x00C00000U + +/*Delay select for the BDL on BG[0].*/ +#undef DDR_PHY_ACBDLR2_BG0BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BG0BD_SHIFT +#undef DDR_PHY_ACBDLR2_BG0BD_MASK +#define DDR_PHY_ACBDLR2_BG0BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BG0BD_SHIFT 16 +#define DDR_PHY_ACBDLR2_BG0BD_MASK 0x003F0000U + +/*Reser.ved Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_15_14_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_15_14_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_15_14_MASK +#define DDR_PHY_ACBDLR2_RESERVED_15_14_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_15_14_SHIFT 14 +#define DDR_PHY_ACBDLR2_RESERVED_15_14_MASK 0x0000C000U + +/*Delay select for the BDL on BA[1].*/ +#undef DDR_PHY_ACBDLR2_BA1BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BA1BD_SHIFT +#undef DDR_PHY_ACBDLR2_BA1BD_MASK +#define DDR_PHY_ACBDLR2_BA1BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BA1BD_SHIFT 8 +#define DDR_PHY_ACBDLR2_BA1BD_MASK 0x00003F00U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR2_RESERVED_7_6_DEFVAL +#undef DDR_PHY_ACBDLR2_RESERVED_7_6_SHIFT +#undef DDR_PHY_ACBDLR2_RESERVED_7_6_MASK +#define DDR_PHY_ACBDLR2_RESERVED_7_6_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_RESERVED_7_6_SHIFT 6 +#define DDR_PHY_ACBDLR2_RESERVED_7_6_MASK 0x000000C0U + +/*Delay select for the BDL on BA[0].*/ +#undef DDR_PHY_ACBDLR2_BA0BD_DEFVAL +#undef DDR_PHY_ACBDLR2_BA0BD_SHIFT +#undef DDR_PHY_ACBDLR2_BA0BD_MASK +#define DDR_PHY_ACBDLR2_BA0BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR2_BA0BD_SHIFT 0 +#define DDR_PHY_ACBDLR2_BA0BD_MASK 0x0000003FU + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_ACBDLR6_RESERVED_31_30_DEFVAL #undef DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT @@ -9412,6 +9304,70 @@ #define DDR_PHY_ACBDLR8_A08BD_SHIFT 0 #define DDR_PHY_ACBDLR8_A08BD_MASK 0x0000003FU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_31_30_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_31_30_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_31_30_MASK +#define DDR_PHY_ACBDLR9_RESERVED_31_30_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_ACBDLR9_RESERVED_31_30_MASK 0xC0000000U + +/*Delay select for the BDL on Address A[15].*/ +#undef DDR_PHY_ACBDLR9_A15BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A15BD_SHIFT +#undef DDR_PHY_ACBDLR9_A15BD_MASK +#define DDR_PHY_ACBDLR9_A15BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A15BD_SHIFT 24 +#define DDR_PHY_ACBDLR9_A15BD_MASK 0x3F000000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_23_22_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_23_22_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_23_22_MASK +#define DDR_PHY_ACBDLR9_RESERVED_23_22_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_23_22_SHIFT 22 +#define DDR_PHY_ACBDLR9_RESERVED_23_22_MASK 0x00C00000U + +/*Delay select for the BDL on Address A[14].*/ +#undef DDR_PHY_ACBDLR9_A14BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A14BD_SHIFT +#undef DDR_PHY_ACBDLR9_A14BD_MASK +#define DDR_PHY_ACBDLR9_A14BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A14BD_SHIFT 16 +#define DDR_PHY_ACBDLR9_A14BD_MASK 0x003F0000U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_15_14_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_15_14_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_15_14_MASK +#define DDR_PHY_ACBDLR9_RESERVED_15_14_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_15_14_SHIFT 14 +#define DDR_PHY_ACBDLR9_RESERVED_15_14_MASK 0x0000C000U + +/*Delay select for the BDL on Address A[13].*/ +#undef DDR_PHY_ACBDLR9_A13BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A13BD_SHIFT +#undef DDR_PHY_ACBDLR9_A13BD_MASK +#define DDR_PHY_ACBDLR9_A13BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A13BD_SHIFT 8 +#define DDR_PHY_ACBDLR9_A13BD_MASK 0x00003F00U + +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_ACBDLR9_RESERVED_7_6_DEFVAL +#undef DDR_PHY_ACBDLR9_RESERVED_7_6_SHIFT +#undef DDR_PHY_ACBDLR9_RESERVED_7_6_MASK +#define DDR_PHY_ACBDLR9_RESERVED_7_6_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_RESERVED_7_6_SHIFT 6 +#define DDR_PHY_ACBDLR9_RESERVED_7_6_MASK 0x000000C0U + +/*Delay select for the BDL on Address A[12].*/ +#undef DDR_PHY_ACBDLR9_A12BD_DEFVAL +#undef DDR_PHY_ACBDLR9_A12BD_SHIFT +#undef DDR_PHY_ACBDLR9_A12BD_MASK +#define DDR_PHY_ACBDLR9_A12BD_DEFVAL 0x00000000 +#define DDR_PHY_ACBDLR9_A12BD_SHIFT 0 +#define DDR_PHY_ACBDLR9_A12BD_MASK 0x0000003FU + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_ZQCR_RESERVED_31_26_DEFVAL #undef DDR_PHY_ZQCR_RESERVED_31_26_SHIFT @@ -14452,6 +14408,158 @@ #define DDR_PHY_DX8GTR0_DGSL_SHIFT 0 #define DDR_PHY_DX8GTR0_DGSL_MASK 0x0000001FU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL0OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL0OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL0OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL0OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL0OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL0OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL0OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL0OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL0OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL0OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL0OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL0OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL0OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL0OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL0OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL0OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBMODE_MASK +#define DDR_PHY_DX8SL0OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL0OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL0OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL0OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL0OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL0OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL0OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL0OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL0OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL0OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL0OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL0OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL0OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL0OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL0OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL0OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL0OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL0OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL0OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL0OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL0OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL0OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL0OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL0OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL0OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL0OSC_DLTST_MASK +#define DDR_PHY_DX8SL0OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL0OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL0OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL0OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL0OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL0OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL0OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL0OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL0OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL0OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL0OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL0OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL0OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL0OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL0OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL0OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL0OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL0OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL0OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL0OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL0OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL0OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL0OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL0OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL0OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL0OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL0OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL0OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL0OSC_OSCEN_MASK +#define DDR_PHY_DX8SL0OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL0OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL0OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT @@ -14740,6 +14848,158 @@ #define DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL0IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL1OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL1OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL1OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL1OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL1OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL1OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL1OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL1OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL1OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL1OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL1OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL1OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL1OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL1OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL1OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL1OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBMODE_MASK +#define DDR_PHY_DX8SL1OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL1OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL1OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL1OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL1OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL1OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL1OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL1OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL1OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL1OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL1OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL1OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL1OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL1OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL1OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL1OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL1OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL1OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL1OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL1OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL1OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL1OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL1OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL1OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL1OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL1OSC_DLTST_MASK +#define DDR_PHY_DX8SL1OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL1OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL1OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL1OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL1OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL1OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL1OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL1OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL1OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL1OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL1OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL1OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL1OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL1OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL1OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL1OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL1OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL1OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL1OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL1OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL1OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL1OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL1OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL1OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL1OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL1OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL1OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL1OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL1OSC_OSCEN_MASK +#define DDR_PHY_DX8SL1OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL1OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL1OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT @@ -15028,6 +15288,158 @@ #define DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL1IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL2OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL2OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL2OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL2OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL2OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL2OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL2OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL2OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL2OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL2OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL2OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL2OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL2OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL2OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL2OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL2OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBMODE_MASK +#define DDR_PHY_DX8SL2OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL2OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL2OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL2OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL2OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL2OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL2OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL2OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL2OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL2OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL2OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL2OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL2OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL2OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL2OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL2OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL2OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL2OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL2OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL2OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL2OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL2OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL2OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL2OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL2OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL2OSC_DLTST_MASK +#define DDR_PHY_DX8SL2OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL2OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL2OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL2OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL2OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL2OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL2OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL2OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL2OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL2OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL2OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL2OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL2OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL2OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL2OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL2OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL2OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL2OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL2OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL2OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL2OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL2OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL2OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL2OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL2OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL2OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL2OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL2OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL2OSC_OSCEN_MASK +#define DDR_PHY_DX8SL2OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL2OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL2OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT @@ -15316,6 +15728,158 @@ #define DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL2IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL3OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL3OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL3OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL3OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL3OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL3OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL3OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL3OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL3OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL3OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL3OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL3OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL3OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL3OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL3OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL3OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBMODE_MASK +#define DDR_PHY_DX8SL3OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL3OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL3OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL3OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL3OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL3OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL3OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL3OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL3OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL3OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL3OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL3OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL3OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL3OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL3OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL3OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL3OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL3OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL3OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL3OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL3OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL3OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL3OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL3OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL3OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL3OSC_DLTST_MASK +#define DDR_PHY_DX8SL3OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL3OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL3OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL3OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL3OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL3OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL3OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL3OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL3OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL3OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL3OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL3OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL3OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL3OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL3OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL3OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL3OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL3OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL3OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL3OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL3OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL3OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL3OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL3OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL3OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL3OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL3OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL3OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL3OSC_OSCEN_MASK +#define DDR_PHY_DX8SL3OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL3OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL3OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT @@ -15604,6 +16168,158 @@ #define DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT 0 #define DDR_PHY_DX8SL3IOCR_DXRXM_MASK 0x000007FFU +/*Reserved. Return zeroes on reads.*/ +#undef DDR_PHY_DX8SL4OSC_RESERVED_31_30_DEFVAL +#undef DDR_PHY_DX8SL4OSC_RESERVED_31_30_SHIFT +#undef DDR_PHY_DX8SL4OSC_RESERVED_31_30_MASK +#define DDR_PHY_DX8SL4OSC_RESERVED_31_30_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_RESERVED_31_30_SHIFT 30 +#define DDR_PHY_DX8SL4OSC_RESERVED_31_30_MASK 0xC0000000U + +/*Enable Clock Gating for DX ddr_clk*/ +#undef DDR_PHY_DX8SL4OSC_GATEDXRDCLK_DEFVAL +#undef DDR_PHY_DX8SL4OSC_GATEDXRDCLK_SHIFT +#undef DDR_PHY_DX8SL4OSC_GATEDXRDCLK_MASK +#define DDR_PHY_DX8SL4OSC_GATEDXRDCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_GATEDXRDCLK_SHIFT 28 +#define DDR_PHY_DX8SL4OSC_GATEDXRDCLK_MASK 0x30000000U + +/*Enable Clock Gating for DX ctl_rd_clk*/ +#undef DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_DEFVAL +#undef DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_SHIFT +#undef DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_MASK +#define DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_SHIFT 26 +#define DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_MASK 0x0C000000U + +/*Enable Clock Gating for DX ctl_clk*/ +#undef DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_DEFVAL +#undef DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_SHIFT +#undef DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_MASK +#define DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_SHIFT 24 +#define DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_MASK 0x03000000U + +/*Selects the level to which clocks will be stalled when clock gating is enabled.*/ +#undef DDR_PHY_DX8SL4OSC_CLKLEVEL_DEFVAL +#undef DDR_PHY_DX8SL4OSC_CLKLEVEL_SHIFT +#undef DDR_PHY_DX8SL4OSC_CLKLEVEL_MASK +#define DDR_PHY_DX8SL4OSC_CLKLEVEL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_CLKLEVEL_SHIFT 22 +#define DDR_PHY_DX8SL4OSC_CLKLEVEL_MASK 0x00C00000U + +/*Loopback Mode*/ +#undef DDR_PHY_DX8SL4OSC_LBMODE_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBMODE_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBMODE_MASK +#define DDR_PHY_DX8SL4OSC_LBMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBMODE_SHIFT 21 +#define DDR_PHY_DX8SL4OSC_LBMODE_MASK 0x00200000U + +/*Load GSDQS LCDL with 2x the calibrated GSDQSPRD value*/ +#undef DDR_PHY_DX8SL4OSC_LBGSDQS_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBGSDQS_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBGSDQS_MASK +#define DDR_PHY_DX8SL4OSC_LBGSDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBGSDQS_SHIFT 20 +#define DDR_PHY_DX8SL4OSC_LBGSDQS_MASK 0x00100000U + +/*Loopback DQS Gating*/ +#undef DDR_PHY_DX8SL4OSC_LBGDQS_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBGDQS_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBGDQS_MASK +#define DDR_PHY_DX8SL4OSC_LBGDQS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBGDQS_SHIFT 18 +#define DDR_PHY_DX8SL4OSC_LBGDQS_MASK 0x000C0000U + +/*Loopback DQS Shift*/ +#undef DDR_PHY_DX8SL4OSC_LBDQSS_DEFVAL +#undef DDR_PHY_DX8SL4OSC_LBDQSS_SHIFT +#undef DDR_PHY_DX8SL4OSC_LBDQSS_MASK +#define DDR_PHY_DX8SL4OSC_LBDQSS_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_LBDQSS_SHIFT 17 +#define DDR_PHY_DX8SL4OSC_LBDQSS_MASK 0x00020000U + +/*PHY High-Speed Reset*/ +#undef DDR_PHY_DX8SL4OSC_PHYHRST_DEFVAL +#undef DDR_PHY_DX8SL4OSC_PHYHRST_SHIFT +#undef DDR_PHY_DX8SL4OSC_PHYHRST_MASK +#define DDR_PHY_DX8SL4OSC_PHYHRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_PHYHRST_SHIFT 16 +#define DDR_PHY_DX8SL4OSC_PHYHRST_MASK 0x00010000U + +/*PHY FIFO Reset*/ +#undef DDR_PHY_DX8SL4OSC_PHYFRST_DEFVAL +#undef DDR_PHY_DX8SL4OSC_PHYFRST_SHIFT +#undef DDR_PHY_DX8SL4OSC_PHYFRST_MASK +#define DDR_PHY_DX8SL4OSC_PHYFRST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_PHYFRST_SHIFT 15 +#define DDR_PHY_DX8SL4OSC_PHYFRST_MASK 0x00008000U + +/*Delay Line Test Start*/ +#undef DDR_PHY_DX8SL4OSC_DLTST_DEFVAL +#undef DDR_PHY_DX8SL4OSC_DLTST_SHIFT +#undef DDR_PHY_DX8SL4OSC_DLTST_MASK +#define DDR_PHY_DX8SL4OSC_DLTST_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_DLTST_SHIFT 14 +#define DDR_PHY_DX8SL4OSC_DLTST_MASK 0x00004000U + +/*Delay Line Test Mode*/ +#undef DDR_PHY_DX8SL4OSC_DLTMODE_DEFVAL +#undef DDR_PHY_DX8SL4OSC_DLTMODE_SHIFT +#undef DDR_PHY_DX8SL4OSC_DLTMODE_MASK +#define DDR_PHY_DX8SL4OSC_DLTMODE_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_DLTMODE_SHIFT 13 +#define DDR_PHY_DX8SL4OSC_DLTMODE_MASK 0x00002000U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL4OSC_RESERVED_12_11_DEFVAL +#undef DDR_PHY_DX8SL4OSC_RESERVED_12_11_SHIFT +#undef DDR_PHY_DX8SL4OSC_RESERVED_12_11_MASK +#define DDR_PHY_DX8SL4OSC_RESERVED_12_11_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_RESERVED_12_11_SHIFT 11 +#define DDR_PHY_DX8SL4OSC_RESERVED_12_11_MASK 0x00001800U + +/*Oscillator Mode Write-Data Delay Line Select*/ +#undef DDR_PHY_DX8SL4OSC_OSCWDDL_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCWDDL_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCWDDL_MASK +#define DDR_PHY_DX8SL4OSC_OSCWDDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCWDDL_SHIFT 9 +#define DDR_PHY_DX8SL4OSC_OSCWDDL_MASK 0x00000600U + +/*Reserved. Caution, do not write to this register field.*/ +#undef DDR_PHY_DX8SL4OSC_RESERVED_8_7_DEFVAL +#undef DDR_PHY_DX8SL4OSC_RESERVED_8_7_SHIFT +#undef DDR_PHY_DX8SL4OSC_RESERVED_8_7_MASK +#define DDR_PHY_DX8SL4OSC_RESERVED_8_7_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_RESERVED_8_7_SHIFT 7 +#define DDR_PHY_DX8SL4OSC_RESERVED_8_7_MASK 0x00000180U + +/*Oscillator Mode Write-Leveling Delay Line Select*/ +#undef DDR_PHY_DX8SL4OSC_OSCWDL_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCWDL_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCWDL_MASK +#define DDR_PHY_DX8SL4OSC_OSCWDL_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCWDL_SHIFT 5 +#define DDR_PHY_DX8SL4OSC_OSCWDL_MASK 0x00000060U + +/*Oscillator Mode Division*/ +#undef DDR_PHY_DX8SL4OSC_OSCDIV_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCDIV_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCDIV_MASK +#define DDR_PHY_DX8SL4OSC_OSCDIV_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCDIV_SHIFT 1 +#define DDR_PHY_DX8SL4OSC_OSCDIV_MASK 0x0000001EU + +/*Oscillator Enable*/ +#undef DDR_PHY_DX8SL4OSC_OSCEN_DEFVAL +#undef DDR_PHY_DX8SL4OSC_OSCEN_SHIFT +#undef DDR_PHY_DX8SL4OSC_OSCEN_MASK +#define DDR_PHY_DX8SL4OSC_OSCEN_DEFVAL 0x00019FFE +#define DDR_PHY_DX8SL4OSC_OSCEN_SHIFT 0 +#define DDR_PHY_DX8SL4OSC_OSCEN_MASK 0x00000001U + /*Reserved. Return zeroes on reads.*/ #undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_DEFVAL #undef DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT @@ -22010,208 +22726,208 @@ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT 0 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK 0x00000001U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT 12 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK 0x00001000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT 1 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK 0x00000002U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT 13 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK 0x00002000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT 2 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK 0x00000004U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT 14 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK 0x00004000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT 3 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK 0x00000008U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT 15 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK 0x00008000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT 4 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK 0x00000010U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT 16 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK 0x00010000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT 5 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK 0x00000020U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT 17 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK 0x00020000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT 6 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK 0x00000040U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT 18 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK 0x00040000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT 7 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK 0x00000080U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT 19 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK 0x00080000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT 8 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK 0x00000100U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT 20 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK 0x00100000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT 9 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK 0x00000200U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT 21 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK 0x00200000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT 10 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK 0x00000400U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT 22 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK 0x00400000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT 11 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK 0x00000800U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT 23 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK 0x00800000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT 12 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK 0x00001000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT 24 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK 0x01000000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT 13 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK 0x00002000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT 25 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK 0x02000000U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT 14 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK 0x00004000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT 0 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK 0x00000001U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT 15 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK 0x00008000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT 1 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK 0x00000002U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT 16 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK 0x00010000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT 2 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK 0x00000004U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT 17 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK 0x00020000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT 3 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK 0x00000008U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT 18 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK 0x00040000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT 4 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK 0x00000010U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT 19 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK 0x00080000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT 5 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK 0x00000020U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT 20 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK 0x00100000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT 6 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK 0x00000040U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT 21 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK 0x00200000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT 7 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK 0x00000080U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT 22 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK 0x00400000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT 8 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK 0x00000100U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT 23 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK 0x00800000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT 9 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK 0x00000200U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT 24 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK 0x01000000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT 10 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK 0x00000400U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT #undef IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK #define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_DEFVAL -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT 25 -#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK 0x02000000U +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT 11 +#define IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK 0x00000800U /*Each bit applies to a single IO. Bit 0 for MIO[26].*/ #undef IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_DEFVAL @@ -23704,10 +24420,14 @@ #define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_DEFVAL 0x00000000 #define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT 0 #define IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK 0x00000001U +#undef CRL_APB_RST_LPD_IOU2_OFFSET +#define CRL_APB_RST_LPD_IOU2_OFFSET 0XFF5E0238 #undef CRL_APB_RST_LPD_IOU0_OFFSET #define CRL_APB_RST_LPD_IOU0_OFFSET 0XFF5E0230 #undef CRL_APB_RST_LPD_IOU2_OFFSET #define CRL_APB_RST_LPD_IOU2_OFFSET 0XFF5E0238 +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_OFFSET +#define IOU_SLCR_IOU_TAPDLY_BYPASS_OFFSET 0XFF180390 #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef CRF_APB_RST_FPD_TOP_OFFSET @@ -23720,6 +24440,8 @@ #define IOU_SLCR_SD_CONFIG_REG2_OFFSET 0XFF180320 #undef IOU_SLCR_SD_CONFIG_REG1_OFFSET #define IOU_SLCR_SD_CONFIG_REG1_OFFSET 0XFF18031C +#undef IOU_SLCR_SD_CONFIG_REG3_OFFSET +#define IOU_SLCR_SD_CONFIG_REG3_OFFSET 0XFF180324 #undef CRL_APB_RST_LPD_IOU2_OFFSET #define CRL_APB_RST_LPD_IOU2_OFFSET 0XFF5E0238 #undef CRL_APB_RST_LPD_IOU2_OFFSET @@ -23754,6 +24476,18 @@ #define APU_ACE_CTRL_OFFSET 0XFD5C0060 #undef RTC_CONTROL_OFFSET #define RTC_CONTROL_OFFSET 0XFFA60040 +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_OFFSET +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_OFFSET 0XFF260020 +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_OFFSET +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_OFFSET 0XFF260000 + +/*Block level reset*/ +#undef CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_DEFVAL +#undef CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_SHIFT +#undef CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_MASK +#define CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_DEFVAL 0x0017FFFF +#define CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_SHIFT 20 +#define CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_MASK 0x00100000U /*GEM 3 reset*/ #undef CRL_APB_RST_LPD_IOU0_GEM3_RESET_DEFVAL @@ -23771,6 +24505,14 @@ #define CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT 0 #define CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK 0x00000001U +/*0: Do not by pass the tap delays on the Rx clock signal of LQSPI 1: Bypass the Tap delay on the Rx clock signal of LQSPI*/ +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_DEFVAL +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_SHIFT +#undef IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_MASK +#define IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_DEFVAL 0x00000007 +#define IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_SHIFT 2 +#define IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_MASK 0x00000004U + /*USB 0 reset for control registers*/ #undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL #undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT @@ -23940,6 +24682,16 @@ #define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT 23 #define IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK 0x7F800000U +/*This is the Timer Count for Re-Tuning Timer for Re-Tuning Mode 1 to 3. Setting to 4'b0 disables Re-Tuning Timer. 0h - Get inf + rmation via other source 1h = 1 seconds 2h = 2 seconds 3h = 4 seconds 4h = 8 seconds -- n = 2(n-1) seconds -- Bh = 1024 secon + s Fh - Ch = Reserved*/ +#undef IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_DEFVAL +#undef IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_SHIFT +#undef IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_MASK +#define IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_DEFVAL 0x06070607 +#define IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_SHIFT 22 +#define IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_MASK 0x03C00000U + /*Block level reset*/ #undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_DEFVAL #undef CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT @@ -24430,6 +25182,80 @@ #define RTC_CONTROL_BATTERY_DISABLE_DEFVAL 0x01000000 #define RTC_CONTROL_BATTERY_DISABLE_SHIFT 31 #define RTC_CONTROL_BATTERY_DISABLE_MASK 0x80000000U + +/*Frequency in number of ticks per second. Valid range from 10 MHz to 100 MHz.*/ +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_DEFVAL +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_SHIFT +#undef IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_MASK +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_DEFVAL +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_SHIFT 0 +#define IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_MASK 0xFFFFFFFFU + +/*Enable 0: The counter is disabled and not incrementing. 1: The counter is enabled and is incrementing.*/ +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_DEFVAL +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_SHIFT +#undef IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_MASK +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_DEFVAL 0x00000000 +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_SHIFT 0 +#define IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_MASK 0x00000001U +#undef LPD_XPPU_CFG_IEN_OFFSET +#define LPD_XPPU_CFG_IEN_OFFSET 0XFF980018 + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_APER_PARITY_DEFVAL +#undef LPD_XPPU_CFG_IEN_APER_PARITY_SHIFT +#undef LPD_XPPU_CFG_IEN_APER_PARITY_MASK +#define LPD_XPPU_CFG_IEN_APER_PARITY_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_APER_PARITY_SHIFT 7 +#define LPD_XPPU_CFG_IEN_APER_PARITY_MASK 0x00000080U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_APER_TZ_DEFVAL +#undef LPD_XPPU_CFG_IEN_APER_TZ_SHIFT +#undef LPD_XPPU_CFG_IEN_APER_TZ_MASK +#define LPD_XPPU_CFG_IEN_APER_TZ_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_APER_TZ_SHIFT 6 +#define LPD_XPPU_CFG_IEN_APER_TZ_MASK 0x00000040U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_APER_PERM_DEFVAL +#undef LPD_XPPU_CFG_IEN_APER_PERM_SHIFT +#undef LPD_XPPU_CFG_IEN_APER_PERM_MASK +#define LPD_XPPU_CFG_IEN_APER_PERM_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_APER_PERM_SHIFT 5 +#define LPD_XPPU_CFG_IEN_APER_PERM_MASK 0x00000020U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_MID_PARITY_DEFVAL +#undef LPD_XPPU_CFG_IEN_MID_PARITY_SHIFT +#undef LPD_XPPU_CFG_IEN_MID_PARITY_MASK +#define LPD_XPPU_CFG_IEN_MID_PARITY_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_MID_PARITY_SHIFT 3 +#define LPD_XPPU_CFG_IEN_MID_PARITY_MASK 0x00000008U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_MID_RO_DEFVAL +#undef LPD_XPPU_CFG_IEN_MID_RO_SHIFT +#undef LPD_XPPU_CFG_IEN_MID_RO_MASK +#define LPD_XPPU_CFG_IEN_MID_RO_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_MID_RO_SHIFT 2 +#define LPD_XPPU_CFG_IEN_MID_RO_MASK 0x00000004U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_MID_MISS_DEFVAL +#undef LPD_XPPU_CFG_IEN_MID_MISS_SHIFT +#undef LPD_XPPU_CFG_IEN_MID_MISS_MASK +#define LPD_XPPU_CFG_IEN_MID_MISS_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_MID_MISS_SHIFT 1 +#define LPD_XPPU_CFG_IEN_MID_MISS_MASK 0x00000002U + +/*See Interuppt Status Register for details*/ +#undef LPD_XPPU_CFG_IEN_INV_APB_DEFVAL +#undef LPD_XPPU_CFG_IEN_INV_APB_SHIFT +#undef LPD_XPPU_CFG_IEN_INV_APB_MASK +#define LPD_XPPU_CFG_IEN_INV_APB_DEFVAL 0x00000000 +#define LPD_XPPU_CFG_IEN_INV_APB_SHIFT 0 +#define LPD_XPPU_CFG_IEN_INV_APB_MASK 0x00000001U #undef SERDES_PLL_REF_SEL0_OFFSET #define SERDES_PLL_REF_SEL0_OFFSET 0XFD410000 #undef SERDES_PLL_REF_SEL1_OFFSET @@ -24496,6 +25322,126 @@ #define SERDES_L3_TX_DIG_TM_61_OFFSET 0XFD40C0F4 #undef SERDES_L3_TXPMA_ST_0_OFFSET #define SERDES_L3_TXPMA_ST_0_OFFSET 0XFD40CB00 +#undef SERDES_L0_TM_AUX_0_OFFSET +#define SERDES_L0_TM_AUX_0_OFFSET 0XFD4010CC +#undef SERDES_L2_TM_AUX_0_OFFSET +#define SERDES_L2_TM_AUX_0_OFFSET 0XFD4090CC +#undef SERDES_L0_TM_DIG_8_OFFSET +#define SERDES_L0_TM_DIG_8_OFFSET 0XFD401074 +#undef SERDES_L1_TM_DIG_8_OFFSET +#define SERDES_L1_TM_DIG_8_OFFSET 0XFD405074 +#undef SERDES_L2_TM_DIG_8_OFFSET +#define SERDES_L2_TM_DIG_8_OFFSET 0XFD409074 +#undef SERDES_L3_TM_DIG_8_OFFSET +#define SERDES_L3_TM_DIG_8_OFFSET 0XFD40D074 +#undef SERDES_L0_TM_MISC2_OFFSET +#define SERDES_L0_TM_MISC2_OFFSET 0XFD40189C +#undef SERDES_L0_TM_IQ_ILL1_OFFSET +#define SERDES_L0_TM_IQ_ILL1_OFFSET 0XFD4018F8 +#undef SERDES_L0_TM_IQ_ILL2_OFFSET +#define SERDES_L0_TM_IQ_ILL2_OFFSET 0XFD4018FC +#undef SERDES_L0_TM_ILL12_OFFSET +#define SERDES_L0_TM_ILL12_OFFSET 0XFD401990 +#undef SERDES_L0_TM_E_ILL1_OFFSET +#define SERDES_L0_TM_E_ILL1_OFFSET 0XFD401924 +#undef SERDES_L0_TM_E_ILL2_OFFSET +#define SERDES_L0_TM_E_ILL2_OFFSET 0XFD401928 +#undef SERDES_L0_TM_IQ_ILL3_OFFSET +#define SERDES_L0_TM_IQ_ILL3_OFFSET 0XFD401900 +#undef SERDES_L0_TM_E_ILL3_OFFSET +#define SERDES_L0_TM_E_ILL3_OFFSET 0XFD40192C +#undef SERDES_L0_TM_ILL8_OFFSET +#define SERDES_L0_TM_ILL8_OFFSET 0XFD401980 +#undef SERDES_L0_TM_IQ_ILL8_OFFSET +#define SERDES_L0_TM_IQ_ILL8_OFFSET 0XFD401914 +#undef SERDES_L0_TM_IQ_ILL9_OFFSET +#define SERDES_L0_TM_IQ_ILL9_OFFSET 0XFD401918 +#undef SERDES_L0_TM_E_ILL8_OFFSET +#define SERDES_L0_TM_E_ILL8_OFFSET 0XFD401940 +#undef SERDES_L0_TM_E_ILL9_OFFSET +#define SERDES_L0_TM_E_ILL9_OFFSET 0XFD401944 +#undef SERDES_L2_TM_MISC2_OFFSET +#define SERDES_L2_TM_MISC2_OFFSET 0XFD40989C +#undef SERDES_L2_TM_IQ_ILL1_OFFSET +#define SERDES_L2_TM_IQ_ILL1_OFFSET 0XFD4098F8 +#undef SERDES_L2_TM_IQ_ILL2_OFFSET +#define SERDES_L2_TM_IQ_ILL2_OFFSET 0XFD4098FC +#undef SERDES_L2_TM_ILL12_OFFSET +#define SERDES_L2_TM_ILL12_OFFSET 0XFD409990 +#undef SERDES_L2_TM_E_ILL1_OFFSET +#define SERDES_L2_TM_E_ILL1_OFFSET 0XFD409924 +#undef SERDES_L2_TM_E_ILL2_OFFSET +#define SERDES_L2_TM_E_ILL2_OFFSET 0XFD409928 +#undef SERDES_L2_TM_IQ_ILL3_OFFSET +#define SERDES_L2_TM_IQ_ILL3_OFFSET 0XFD409900 +#undef SERDES_L2_TM_E_ILL3_OFFSET +#define SERDES_L2_TM_E_ILL3_OFFSET 0XFD40992C +#undef SERDES_L2_TM_ILL8_OFFSET +#define SERDES_L2_TM_ILL8_OFFSET 0XFD409980 +#undef SERDES_L2_TM_IQ_ILL8_OFFSET +#define SERDES_L2_TM_IQ_ILL8_OFFSET 0XFD409914 +#undef SERDES_L2_TM_IQ_ILL9_OFFSET +#define SERDES_L2_TM_IQ_ILL9_OFFSET 0XFD409918 +#undef SERDES_L2_TM_E_ILL8_OFFSET +#define SERDES_L2_TM_E_ILL8_OFFSET 0XFD409940 +#undef SERDES_L2_TM_E_ILL9_OFFSET +#define SERDES_L2_TM_E_ILL9_OFFSET 0XFD409944 +#undef SERDES_L3_TM_MISC2_OFFSET +#define SERDES_L3_TM_MISC2_OFFSET 0XFD40D89C +#undef SERDES_L3_TM_IQ_ILL1_OFFSET +#define SERDES_L3_TM_IQ_ILL1_OFFSET 0XFD40D8F8 +#undef SERDES_L3_TM_IQ_ILL2_OFFSET +#define SERDES_L3_TM_IQ_ILL2_OFFSET 0XFD40D8FC +#undef SERDES_L3_TM_ILL12_OFFSET +#define SERDES_L3_TM_ILL12_OFFSET 0XFD40D990 +#undef SERDES_L3_TM_E_ILL1_OFFSET +#define SERDES_L3_TM_E_ILL1_OFFSET 0XFD40D924 +#undef SERDES_L3_TM_E_ILL2_OFFSET +#define SERDES_L3_TM_E_ILL2_OFFSET 0XFD40D928 +#undef SERDES_L3_TM_ILL11_OFFSET +#define SERDES_L3_TM_ILL11_OFFSET 0XFD40D98C +#undef SERDES_L3_TM_IQ_ILL3_OFFSET +#define SERDES_L3_TM_IQ_ILL3_OFFSET 0XFD40D900 +#undef SERDES_L3_TM_E_ILL3_OFFSET +#define SERDES_L3_TM_E_ILL3_OFFSET 0XFD40D92C +#undef SERDES_L3_TM_ILL8_OFFSET +#define SERDES_L3_TM_ILL8_OFFSET 0XFD40D980 +#undef SERDES_L3_TM_IQ_ILL8_OFFSET +#define SERDES_L3_TM_IQ_ILL8_OFFSET 0XFD40D914 +#undef SERDES_L3_TM_IQ_ILL9_OFFSET +#define SERDES_L3_TM_IQ_ILL9_OFFSET 0XFD40D918 +#undef SERDES_L3_TM_E_ILL8_OFFSET +#define SERDES_L3_TM_E_ILL8_OFFSET 0XFD40D940 +#undef SERDES_L3_TM_E_ILL9_OFFSET +#define SERDES_L3_TM_E_ILL9_OFFSET 0XFD40D944 +#undef SERDES_L0_TM_DIG_21_OFFSET +#define SERDES_L0_TM_DIG_21_OFFSET 0XFD4010A8 +#undef SERDES_L0_TM_DIG_10_OFFSET +#define SERDES_L0_TM_DIG_10_OFFSET 0XFD40107C +#undef SERDES_L0_TM_RST_DLY_OFFSET +#define SERDES_L0_TM_RST_DLY_OFFSET 0XFD4019A4 +#undef SERDES_L0_TM_ANA_BYP_15_OFFSET +#define SERDES_L0_TM_ANA_BYP_15_OFFSET 0XFD401038 +#undef SERDES_L0_TM_ANA_BYP_12_OFFSET +#define SERDES_L0_TM_ANA_BYP_12_OFFSET 0XFD40102C +#undef SERDES_L1_TM_RST_DLY_OFFSET +#define SERDES_L1_TM_RST_DLY_OFFSET 0XFD4059A4 +#undef SERDES_L1_TM_ANA_BYP_15_OFFSET +#define SERDES_L1_TM_ANA_BYP_15_OFFSET 0XFD405038 +#undef SERDES_L1_TM_ANA_BYP_12_OFFSET +#define SERDES_L1_TM_ANA_BYP_12_OFFSET 0XFD40502C +#undef SERDES_L2_TM_RST_DLY_OFFSET +#define SERDES_L2_TM_RST_DLY_OFFSET 0XFD4099A4 +#undef SERDES_L2_TM_ANA_BYP_15_OFFSET +#define SERDES_L2_TM_ANA_BYP_15_OFFSET 0XFD409038 +#undef SERDES_L2_TM_ANA_BYP_12_OFFSET +#define SERDES_L2_TM_ANA_BYP_12_OFFSET 0XFD40902C +#undef SERDES_L3_TM_RST_DLY_OFFSET +#define SERDES_L3_TM_RST_DLY_OFFSET 0XFD40D9A4 +#undef SERDES_L3_TM_ANA_BYP_15_OFFSET +#define SERDES_L3_TM_ANA_BYP_15_OFFSET 0XFD40D038 +#undef SERDES_L3_TM_ANA_BYP_12_OFFSET +#define SERDES_L3_TM_ANA_BYP_12_OFFSET 0XFD40D02C #undef SERDES_ICM_CFG0_OFFSET #define SERDES_ICM_CFG0_OFFSET 0XFD410010 #undef SERDES_ICM_CFG1_OFFSET @@ -24504,10 +25450,22 @@ #define SERDES_L1_TXPMD_TM_45_OFFSET 0XFD404CB4 #undef SERDES_L1_TX_ANA_TM_118_OFFSET #define SERDES_L1_TX_ANA_TM_118_OFFSET 0XFD4041D8 +#undef SERDES_L3_TX_ANA_TM_118_OFFSET +#define SERDES_L3_TX_ANA_TM_118_OFFSET 0XFD40C1D8 +#undef SERDES_L3_TM_CDR5_OFFSET +#define SERDES_L3_TM_CDR5_OFFSET 0XFD40DC14 +#undef SERDES_L3_TM_CDR16_OFFSET +#define SERDES_L3_TM_CDR16_OFFSET 0XFD40DC40 +#undef SERDES_L3_TM_EQ0_OFFSET +#define SERDES_L3_TM_EQ0_OFFSET 0XFD40D94C +#undef SERDES_L3_TM_EQ1_OFFSET +#define SERDES_L3_TM_EQ1_OFFSET 0XFD40D950 #undef SERDES_L1_TXPMD_TM_48_OFFSET #define SERDES_L1_TXPMD_TM_48_OFFSET 0XFD404CC0 #undef SERDES_L1_TX_ANA_TM_18_OFFSET #define SERDES_L1_TX_ANA_TM_18_OFFSET 0XFD404048 +#undef SERDES_L3_TX_ANA_TM_18_OFFSET +#define SERDES_L3_TX_ANA_TM_18_OFFSET 0XFD40C048 /*PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135 @@ -24909,6 +25867,486 @@ #define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT 4 #define SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK 0x000000F0U +/*Spare- not used*/ +#undef SERDES_L0_TM_AUX_0_BIT_2_DEFVAL +#undef SERDES_L0_TM_AUX_0_BIT_2_SHIFT +#undef SERDES_L0_TM_AUX_0_BIT_2_MASK +#define SERDES_L0_TM_AUX_0_BIT_2_DEFVAL 0x00000000 +#define SERDES_L0_TM_AUX_0_BIT_2_SHIFT 5 +#define SERDES_L0_TM_AUX_0_BIT_2_MASK 0x00000020U + +/*Spare- not used*/ +#undef SERDES_L2_TM_AUX_0_BIT_2_DEFVAL +#undef SERDES_L2_TM_AUX_0_BIT_2_SHIFT +#undef SERDES_L2_TM_AUX_0_BIT_2_MASK +#define SERDES_L2_TM_AUX_0_BIT_2_DEFVAL 0x00000000 +#define SERDES_L2_TM_AUX_0_BIT_2_SHIFT 5 +#define SERDES_L2_TM_AUX_0_BIT_2_MASK 0x00000020U + +/*Enable Eye Surf*/ +#undef SERDES_L0_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L0_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L0_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L0_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L0_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L0_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*Enable Eye Surf*/ +#undef SERDES_L1_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L1_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L1_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L1_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L1_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L1_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*Enable Eye Surf*/ +#undef SERDES_L2_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L2_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L2_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L2_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L2_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L2_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*Enable Eye Surf*/ +#undef SERDES_L3_TM_DIG_8_EYESURF_ENABLE_DEFVAL +#undef SERDES_L3_TM_DIG_8_EYESURF_ENABLE_SHIFT +#undef SERDES_L3_TM_DIG_8_EYESURF_ENABLE_MASK +#define SERDES_L3_TM_DIG_8_EYESURF_ENABLE_DEFVAL 0x00000000 +#define SERDES_L3_TM_DIG_8_EYESURF_ENABLE_SHIFT 4 +#define SERDES_L3_TM_DIG_8_EYESURF_ENABLE_MASK 0x00000010U + +/*ILL calib counts BYPASSED with calcode bits*/ +#undef SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL +#undef SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT +#undef SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK +#define SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL 0x00000000 +#define SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT 7 +#define SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK 0x00000080U + +/*IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL +#undef SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT +#undef SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK +#define SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK 0x000000FFU + +/*IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL +#undef SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT +#undef SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK +#define SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK 0x000000FFU + +/*G1A pll ctr bypass value*/ +#undef SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL +#undef SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT +#undef SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK +#define SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT 0 +#define SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK 0x000000FFU + +/*E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL +#undef SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT +#undef SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK +#define SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT 0 +#define SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK 0x000000FFU + +/*E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL +#undef SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT +#undef SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK +#define SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT 0 +#define SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK 0x000000FFU + +/*IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL +#undef SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT +#undef SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK +#define SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK 0x000000FFU + +/*E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL +#undef SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT +#undef SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK +#define SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT 0 +#define SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK 0x000000FFU + +/*ILL calibration code change wait time*/ +#undef SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL +#undef SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT +#undef SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_MASK +#define SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL 0x00000002 +#define SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT 0 +#define SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_MASK 0x000000FFU + +/*IQ ILL polytrim bypass value*/ +#undef SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL +#undef SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT +#undef SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK +#define SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass IQ polytrim*/ +#undef SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL +#undef SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT +#undef SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK +#define SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT 0 +#define SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK 0x00000001U + +/*E ILL polytrim bypass value*/ +#undef SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL +#undef SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT +#undef SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK +#define SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass E polytrim*/ +#undef SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL +#undef SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT +#undef SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK +#define SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT 0 +#define SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK 0x00000001U + +/*ILL calib counts BYPASSED with calcode bits*/ +#undef SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL +#undef SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT +#undef SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK +#define SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL 0x00000000 +#define SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT 7 +#define SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK 0x00000080U + +/*IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL +#undef SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT +#undef SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK +#define SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK 0x000000FFU + +/*IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL +#undef SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT +#undef SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK +#define SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK 0x000000FFU + +/*G1A pll ctr bypass value*/ +#undef SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL +#undef SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT +#undef SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK +#define SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT 0 +#define SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK 0x000000FFU + +/*E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL +#undef SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT +#undef SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK +#define SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT 0 +#define SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK 0x000000FFU + +/*E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL +#undef SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT +#undef SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK +#define SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT 0 +#define SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK 0x000000FFU + +/*IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL +#undef SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT +#undef SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK +#define SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK 0x000000FFU + +/*E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL +#undef SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT +#undef SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK +#define SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT 0 +#define SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK 0x000000FFU + +/*ILL calibration code change wait time*/ +#undef SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL +#undef SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT +#undef SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_MASK +#define SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL 0x00000002 +#define SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT 0 +#define SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_MASK 0x000000FFU + +/*IQ ILL polytrim bypass value*/ +#undef SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL +#undef SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT +#undef SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK +#define SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass IQ polytrim*/ +#undef SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL +#undef SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT +#undef SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK +#define SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT 0 +#define SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK 0x00000001U + +/*E ILL polytrim bypass value*/ +#undef SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL +#undef SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT +#undef SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK +#define SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass E polytrim*/ +#undef SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL +#undef SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT +#undef SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK +#define SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT 0 +#define SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK 0x00000001U + +/*ILL calib counts BYPASSED with calcode bits*/ +#undef SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL +#undef SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT +#undef SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK +#define SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_DEFVAL 0x00000000 +#define SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT 7 +#define SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK 0x00000080U + +/*IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL +#undef SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT +#undef SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK +#define SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK 0x000000FFU + +/*IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL +#undef SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT +#undef SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK +#define SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK 0x000000FFU + +/*G1A pll ctr bypass value*/ +#undef SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL +#undef SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT +#undef SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK +#define SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT 0 +#define SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK 0x000000FFU + +/*E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS*/ +#undef SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL +#undef SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT +#undef SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK +#define SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT 0 +#define SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK 0x000000FFU + +/*E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2*/ +#undef SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL +#undef SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT +#undef SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK +#define SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT 0 +#define SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK 0x000000FFU + +/*G2A_PCIe1 PLL ctr bypass value*/ +#undef SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_DEFVAL +#undef SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_SHIFT +#undef SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_MASK +#define SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_SHIFT 4 +#define SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_MASK 0x000000F0U + +/*IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL +#undef SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT +#undef SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK +#define SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK 0x000000FFU + +/*E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3*/ +#undef SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL +#undef SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT +#undef SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK +#define SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT 0 +#define SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK 0x000000FFU + +/*ILL calibration code change wait time*/ +#undef SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL +#undef SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT +#undef SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_MASK +#define SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_DEFVAL 0x00000002 +#define SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT 0 +#define SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_MASK 0x000000FFU + +/*IQ ILL polytrim bypass value*/ +#undef SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL +#undef SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT +#undef SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK +#define SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass IQ polytrim*/ +#undef SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL +#undef SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT +#undef SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK +#define SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT 0 +#define SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK 0x00000001U + +/*E ILL polytrim bypass value*/ +#undef SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL +#undef SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT +#undef SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK +#define SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT 0 +#define SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK 0x000000FFU + +/*bypass E polytrim*/ +#undef SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL +#undef SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT +#undef SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK +#define SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_DEFVAL 0x00000000 +#define SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT 0 +#define SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK 0x00000001U + +/*pre lock comma count threshold. 2'b 00 : 3, 2'b 01 : 5, 2'b 10 : 10, 2'b 11 : 20*/ +#undef SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_DEFVAL +#undef SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_SHIFT +#undef SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_MASK +#define SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_DEFVAL 0x00000000 +#define SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_SHIFT 0 +#define SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_MASK 0x00000003U + +/*CDR lock wait time. (1-16 us). cdr_lock_wait_time = 4'b xxxx + 4'b 0001*/ +#undef SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_DEFVAL +#undef SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_SHIFT +#undef SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_MASK +#define SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_DEFVAL 0x00000001 +#define SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_SHIFT 0 +#define SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_MASK 0x0000000FU + +/*Delay apb reset by specified amount*/ +#undef SERDES_L0_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L0_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L0_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L0_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L0_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L0_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + +/*Delay apb reset by specified amount*/ +#undef SERDES_L1_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L1_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L1_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L1_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L1_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L1_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + +/*Delay apb reset by specified amount*/ +#undef SERDES_L2_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L2_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L2_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L2_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L2_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L2_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + +/*Delay apb reset by specified amount*/ +#undef SERDES_L3_TM_RST_DLY_APB_RST_DLY_DEFVAL +#undef SERDES_L3_TM_RST_DLY_APB_RST_DLY_SHIFT +#undef SERDES_L3_TM_RST_DLY_APB_RST_DLY_MASK +#define SERDES_L3_TM_RST_DLY_APB_RST_DLY_DEFVAL 0x00000000 +#define SERDES_L3_TM_RST_DLY_APB_RST_DLY_SHIFT 0 +#define SERDES_L3_TM_RST_DLY_APB_RST_DLY_MASK 0x000000FFU + +/*Enable Bypass for <7> of TM_ANA_BYPS_15*/ +#undef SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL +#undef SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT +#undef SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK +#define SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_DEFVAL 0x00000000 +#define SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT 6 +#define SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK 0x00000040U + +/*Enable Bypass for <7> of TM_ANA_BYPS_12*/ +#undef SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL +#undef SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT +#undef SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK +#define SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_DEFVAL 0x00000000 +#define SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT 6 +#define SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK 0x00000040U + /*Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse , 7 - Unused*/ #undef SERDES_ICM_CFG0_L0_ICM_CFG_DEFVAL @@ -24993,6 +26431,62 @@ #define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT 0 #define SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK 0x00000001U +/*Test register force for enabling/disablign TX deemphasis bits <17:0>*/ +#undef SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL +#undef SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT +#undef SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK +#define SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_DEFVAL 0x00000000 +#define SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT 0 +#define SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK 0x00000001U + +/*FPHL FSM accumulate cycles*/ +#undef SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_DEFVAL +#undef SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_SHIFT +#undef SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_MASK +#define SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_DEFVAL 0x00000000 +#define SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_SHIFT 5 +#define SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_MASK 0x000000E0U + +/*FFL Phase0 int gain aka 2ol SD update rate*/ +#undef SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_DEFVAL +#undef SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_SHIFT +#undef SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_MASK +#define SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_DEFVAL 0x00000000 +#define SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_SHIFT 0 +#define SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_MASK 0x0000001FU + +/*FFL Phase0 prop gain aka 1ol SD update rate*/ +#undef SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_DEFVAL +#undef SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_SHIFT +#undef SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_MASK +#define SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_DEFVAL 0x00000000 +#define SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_SHIFT 0 +#define SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_MASK 0x0000001FU + +/*EQ stg 2 controls BYPASSED*/ +#undef SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_DEFVAL +#undef SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_SHIFT +#undef SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_MASK +#define SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_DEFVAL 0x00000000 +#define SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_SHIFT 5 +#define SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_MASK 0x00000020U + +/*EQ STG2 RL PROG*/ +#undef SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_DEFVAL +#undef SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_SHIFT +#undef SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_MASK +#define SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_DEFVAL 0x00000000 +#define SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_SHIFT 0 +#define SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_MASK 0x00000003U + +/*EQ stg 2 preamp mode val*/ +#undef SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_DEFVAL +#undef SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_SHIFT +#undef SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_MASK +#define SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_DEFVAL 0x00000000 +#define SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_SHIFT 2 +#define SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_MASK 0x00000004U + /*Margining factor value*/ #undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_DEFVAL #undef SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT @@ -25008,10 +26502,20 @@ #define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL 0x00000002 #define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT 0 #define SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK 0x000000FFU + +/*pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved*/ +#undef SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL +#undef SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT +#undef SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK +#define SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_DEFVAL 0x00000002 +#define SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT 0 +#define SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK 0x000000FFU #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef USB3_0_FPD_POWER_PRSNT_OFFSET #define USB3_0_FPD_POWER_PRSNT_OFFSET 0XFF9D0080 +#undef USB3_0_FPD_PIPE_CLK_OFFSET +#define USB3_0_FPD_PIPE_CLK_OFFSET 0XFF9D007C #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef CRL_APB_RST_LPD_IOU0_OFFSET @@ -25032,8 +26536,6 @@ #define USB3_0_XHCI_GUSB2PHYCFG_OFFSET 0XFE20C200 #undef USB3_0_XHCI_GFLADJ_OFFSET #define USB3_0_XHCI_GFLADJ_OFFSET 0XFE20C630 -#undef PCIE_ATTRIB_ATTR_37_OFFSET -#define PCIE_ATTRIB_ATTR_37_OFFSET 0XFD480094 #undef PCIE_ATTRIB_ATTR_25_OFFSET #define PCIE_ATTRIB_ATTR_25_OFFSET 0XFD480064 #undef PCIE_ATTRIB_ATTR_7_OFFSET @@ -25108,6 +26610,30 @@ #define PCIE_ATTRIB_ATTR_79_OFFSET 0XFD48013C #undef PCIE_ATTRIB_ATTR_43_OFFSET #define PCIE_ATTRIB_ATTR_43_OFFSET 0XFD4800AC +#undef PCIE_ATTRIB_ATTR_48_OFFSET +#define PCIE_ATTRIB_ATTR_48_OFFSET 0XFD4800C0 +#undef PCIE_ATTRIB_ATTR_46_OFFSET +#define PCIE_ATTRIB_ATTR_46_OFFSET 0XFD4800B8 +#undef PCIE_ATTRIB_ATTR_47_OFFSET +#define PCIE_ATTRIB_ATTR_47_OFFSET 0XFD4800BC +#undef PCIE_ATTRIB_ATTR_44_OFFSET +#define PCIE_ATTRIB_ATTR_44_OFFSET 0XFD4800B0 +#undef PCIE_ATTRIB_ATTR_45_OFFSET +#define PCIE_ATTRIB_ATTR_45_OFFSET 0XFD4800B4 +#undef PCIE_ATTRIB_CB_OFFSET +#define PCIE_ATTRIB_CB_OFFSET 0XFD48031C +#undef PCIE_ATTRIB_ATTR_35_OFFSET +#define PCIE_ATTRIB_ATTR_35_OFFSET 0XFD48008C +#undef CRF_APB_RST_FPD_TOP_OFFSET +#define CRF_APB_RST_FPD_TOP_OFFSET 0XFD1A0100 +#undef SATA_AHCI_VENDOR_PP2C_OFFSET +#define SATA_AHCI_VENDOR_PP2C_OFFSET 0XFD0C00AC +#undef SATA_AHCI_VENDOR_PP3C_OFFSET +#define SATA_AHCI_VENDOR_PP3C_OFFSET 0XFD0C00B0 +#undef SATA_AHCI_VENDOR_PP4C_OFFSET +#define SATA_AHCI_VENDOR_PP4C_OFFSET 0XFD0C00B4 +#undef SATA_AHCI_VENDOR_PP5C_OFFSET +#define SATA_AHCI_VENDOR_PP5C_OFFSET 0XFD0C00B8 /*USB 0 reset for control registers*/ #undef CRL_APB_RST_LPD_TOP_USB0_APB_RESET_DEFVAL @@ -25125,6 +26651,14 @@ #define USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT 0 #define USB3_0_FPD_POWER_PRSNT_OPTION_MASK 0x00000001U +/*This bit is used to choose between PIPE clock coming from SerDes and the suspend clk*/ +#undef USB3_0_FPD_PIPE_CLK_OPTION_DEFVAL +#undef USB3_0_FPD_PIPE_CLK_OPTION_SHIFT +#undef USB3_0_FPD_PIPE_CLK_OPTION_MASK +#define USB3_0_FPD_PIPE_CLK_OPTION_DEFVAL +#define USB3_0_FPD_PIPE_CLK_OPTION_SHIFT 0 +#define USB3_0_FPD_PIPE_CLK_OPTION_MASK 0x00000001U + /*USB 0 sleep circuit reset*/ #undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_DEFVAL #undef CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT @@ -25173,14 +26707,6 @@ #define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT 19 #define CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK 0x00080000U -/*PCIE control block level reset*/ -#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL -#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT -#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK -#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 0x000F9FFE -#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 17 -#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 0x00020000U - /*PCIE bridge block level reset (AXI interface)*/ #undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_DEFVAL #undef CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT @@ -25266,20 +26792,6 @@ #define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT 7 #define USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK 0x00000080U -/*Suspend USB2.0 HS/FS/LS PHY (SusPHY) When set, USB2.0 PHY enters Suspend mode if Suspend conditions are valid. For DRD/OTG co - figurations, it is recommended that this bit is set to 0 during coreConsultant configuration. If it is set to 1, then the app - ication must clear this bit after power-on reset. Application needs to set it to 1 after the core initialization completes. F - r all other configurations, this bit can be set to 1 during core configuration. Note: - In host mode, on reset, this bit is s - t to 1. Software can override this bit after reset. - In device mode, before issuing any device endpoint command when operati - g in 2.0 speeds, disable this bit and enable it after the command completes. If you issue a command without disabling this bi - when the device is in L2 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get completed.*/ -#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL -#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT -#undef USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK -#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_DEFVAL 0x00000000 -#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_SHIFT 6 -#define USB3_0_XHCI_GUSB2PHYCFG_SUSPENDUSB20_MASK 0x00000040U - /*Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1 full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U @@ -25345,51 +26857,6 @@ #define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT 8 #define USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK 0x003FFF00U -/*Status Read value of PLL Lock*/ -#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L0_PLL_STATUS_READ_1_OFFSET 0XFD4023E4 - -/*Status Read value of PLL Lock*/ -#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L1_PLL_STATUS_READ_1_OFFSET 0XFD4063E4 - -/*Status Read value of PLL Lock*/ -#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L2_PLL_STATUS_READ_1_OFFSET 0XFD40A3E4 - -/*Status Read value of PLL Lock*/ -#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL -#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT -#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK -#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 -#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 -#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U -#define SERDES_L3_PLL_STATUS_READ_1_OFFSET 0XFD40E3E4 - -/*Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r - gister.; EP=0x0001; RP=0x0001*/ -#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL -#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT -#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK -#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL 0x000009FF -#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT 14 -#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK 0x00004000U - /*If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001*/ #undef PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_DEFVAL @@ -25815,6 +27282,15 @@ #define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT 9 #define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK 0x00000200U +/*Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r + gister.; EP=0x0001; RP=0x0001*/ +#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL +#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT +#undef PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK +#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_DEFVAL 0x000009FF +#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT 14 +#define PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK 0x00004000U + /*Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L _REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000*/ #undef PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_DEFVAL @@ -25945,6 +27421,229 @@ #define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_DEFVAL 0x00000100 #define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT 8 #define PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK 0x00000100U + +/*MSI-X Table Size. This value is transferred to the MSI-X Message Control[10:0] field. Set to 0 if MSI-X is not enabled. Note + hat the core does not implement the table; that must be implemented in user logic.; EP=0x0003; RP=0x0000*/ +#undef PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_DEFVAL +#undef PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_SHIFT +#undef PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_MASK +#define PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_DEFVAL +#define PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_SHIFT 0 +#define PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_MASK 0x000007FFU + +/*MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0001; + P=0x0000*/ +#undef PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#define PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT 0 +#define PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_MASK 0x0000FFFFU + +/*MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0000; + P=0x0000*/ +#undef PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_DEFVAL +#define PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT 0 +#define PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_MASK 0x00001FFFU + +/*MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x0001; RP=0x0000*/ +#undef PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL +#define PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT 0 +#define PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_MASK 0x0000FFFFU + +/*MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP + 0x1000; RP=0x0000*/ +#undef PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL +#undef PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT +#undef PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_MASK +#define PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_DEFVAL 0x00008000 +#define PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT 3 +#define PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_MASK 0x0000FFF8U + +/*DT837748 Enable*/ +#undef PCIE_ATTRIB_CB_CB1_DEFVAL +#undef PCIE_ATTRIB_CB_CB1_SHIFT +#undef PCIE_ATTRIB_CB_CB1_MASK +#define PCIE_ATTRIB_CB_CB1_DEFVAL 0x00000001 +#define PCIE_ATTRIB_CB_CB1_SHIFT 1 +#define PCIE_ATTRIB_CB_CB1_MASK 0x00000002U + +/*Active State PM Support. Indicates the level of active state power management supported by the selected PCI Express Link, enc + ded as follows: 0 Reserved, 1 L0s entry supported, 2 Reserved, 3 L0s and L1 entry supported.; EP=0x0001; RP=0x0001*/ +#undef PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_DEFVAL +#undef PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_SHIFT +#undef PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_MASK +#define PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_DEFVAL 0x00001FFD +#define PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_SHIFT 12 +#define PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_MASK 0x00003000U + +/*PCIE control block level reset*/ +#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL +#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT +#undef CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK +#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_DEFVAL 0x000F9FFE +#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT 17 +#define CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK 0x00020000U + +/*Status Read value of PLL Lock*/ +#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L0_PLL_STATUS_READ_1_OFFSET 0XFD4023E4 + +/*Status Read value of PLL Lock*/ +#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L1_PLL_STATUS_READ_1_OFFSET 0XFD4063E4 + +/*Status Read value of PLL Lock*/ +#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L2_PLL_STATUS_READ_1_OFFSET 0XFD40A3E4 + +/*Status Read value of PLL Lock*/ +#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL +#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT +#undef SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK +#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_DEFVAL 0x00000001 +#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_SHIFT 4 +#define SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ_MASK 0x00000010U +#define SERDES_L3_PLL_STATUS_READ_1_OFFSET 0XFD40E3E4 + +/*CIBGMN: COMINIT Burst Gap Minimum.*/ +#undef SATA_AHCI_VENDOR_PP2C_CIBGMN_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CIBGMN_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CIBGMN_MASK +#define SATA_AHCI_VENDOR_PP2C_CIBGMN_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CIBGMN_SHIFT 0 +#define SATA_AHCI_VENDOR_PP2C_CIBGMN_MASK 0x000000FFU + +/*CIBGMX: COMINIT Burst Gap Maximum.*/ +#undef SATA_AHCI_VENDOR_PP2C_CIBGMX_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CIBGMX_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CIBGMX_MASK +#define SATA_AHCI_VENDOR_PP2C_CIBGMX_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CIBGMX_SHIFT 8 +#define SATA_AHCI_VENDOR_PP2C_CIBGMX_MASK 0x0000FF00U + +/*CIBGN: COMINIT Burst Gap Nominal.*/ +#undef SATA_AHCI_VENDOR_PP2C_CIBGN_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CIBGN_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CIBGN_MASK +#define SATA_AHCI_VENDOR_PP2C_CIBGN_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CIBGN_SHIFT 16 +#define SATA_AHCI_VENDOR_PP2C_CIBGN_MASK 0x00FF0000U + +/*CINMP: COMINIT Negate Minimum Period.*/ +#undef SATA_AHCI_VENDOR_PP2C_CINMP_DEFVAL +#undef SATA_AHCI_VENDOR_PP2C_CINMP_SHIFT +#undef SATA_AHCI_VENDOR_PP2C_CINMP_MASK +#define SATA_AHCI_VENDOR_PP2C_CINMP_DEFVAL 0x28184D1B +#define SATA_AHCI_VENDOR_PP2C_CINMP_SHIFT 24 +#define SATA_AHCI_VENDOR_PP2C_CINMP_MASK 0xFF000000U + +/*CWBGMN: COMWAKE Burst Gap Minimum.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWBGMN_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWBGMN_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWBGMN_MASK +#define SATA_AHCI_VENDOR_PP3C_CWBGMN_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWBGMN_SHIFT 0 +#define SATA_AHCI_VENDOR_PP3C_CWBGMN_MASK 0x000000FFU + +/*CWBGMX: COMWAKE Burst Gap Maximum.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWBGMX_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWBGMX_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWBGMX_MASK +#define SATA_AHCI_VENDOR_PP3C_CWBGMX_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWBGMX_SHIFT 8 +#define SATA_AHCI_VENDOR_PP3C_CWBGMX_MASK 0x0000FF00U + +/*CWBGN: COMWAKE Burst Gap Nominal.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWBGN_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWBGN_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWBGN_MASK +#define SATA_AHCI_VENDOR_PP3C_CWBGN_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWBGN_SHIFT 16 +#define SATA_AHCI_VENDOR_PP3C_CWBGN_MASK 0x00FF0000U + +/*CWNMP: COMWAKE Negate Minimum Period.*/ +#undef SATA_AHCI_VENDOR_PP3C_CWNMP_DEFVAL +#undef SATA_AHCI_VENDOR_PP3C_CWNMP_SHIFT +#undef SATA_AHCI_VENDOR_PP3C_CWNMP_MASK +#define SATA_AHCI_VENDOR_PP3C_CWNMP_DEFVAL 0x0E081906 +#define SATA_AHCI_VENDOR_PP3C_CWNMP_SHIFT 24 +#define SATA_AHCI_VENDOR_PP3C_CWNMP_MASK 0xFF000000U + +/*BMX: COM Burst Maximum.*/ +#undef SATA_AHCI_VENDOR_PP4C_BMX_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_BMX_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_BMX_MASK +#define SATA_AHCI_VENDOR_PP4C_BMX_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_BMX_SHIFT 0 +#define SATA_AHCI_VENDOR_PP4C_BMX_MASK 0x000000FFU + +/*BNM: COM Burst Nominal.*/ +#undef SATA_AHCI_VENDOR_PP4C_BNM_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_BNM_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_BNM_MASK +#define SATA_AHCI_VENDOR_PP4C_BNM_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_BNM_SHIFT 8 +#define SATA_AHCI_VENDOR_PP4C_BNM_MASK 0x0000FF00U + +/*SFD: Signal Failure Detection, if the signal detection de-asserts for a time greater than this then the OOB detector will det + rmine this is a line idle and cause the PhyInit state machine to exit the Phy Ready State. A value of zero disables the Signa + Failure Detector. The value is based on the OOB Detector Clock typically (PMCLK Clock Period) * SFD giving a nominal time of + 500ns based on a 150MHz PMCLK.*/ +#undef SATA_AHCI_VENDOR_PP4C_SFD_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_SFD_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_SFD_MASK +#define SATA_AHCI_VENDOR_PP4C_SFD_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_SFD_SHIFT 16 +#define SATA_AHCI_VENDOR_PP4C_SFD_MASK 0x00FF0000U + +/*PTST: Partial to Slumber timer value, specific delay the controller should apply while in partial before entering slumber. Th + value is bases on the system clock divided by 128, total delay = (Sys Clock Period) * PTST * 128*/ +#undef SATA_AHCI_VENDOR_PP4C_PTST_DEFVAL +#undef SATA_AHCI_VENDOR_PP4C_PTST_SHIFT +#undef SATA_AHCI_VENDOR_PP4C_PTST_MASK +#define SATA_AHCI_VENDOR_PP4C_PTST_DEFVAL 0x064A0813 +#define SATA_AHCI_VENDOR_PP4C_PTST_SHIFT 24 +#define SATA_AHCI_VENDOR_PP4C_PTST_MASK 0xFF000000U + +/*RIT: Retry Interval Timer. The calculated value divided by two, the lower digit of precision is not needed.*/ +#undef SATA_AHCI_VENDOR_PP5C_RIT_DEFVAL +#undef SATA_AHCI_VENDOR_PP5C_RIT_SHIFT +#undef SATA_AHCI_VENDOR_PP5C_RIT_MASK +#define SATA_AHCI_VENDOR_PP5C_RIT_DEFVAL 0x3FFC96A4 +#define SATA_AHCI_VENDOR_PP5C_RIT_SHIFT 0 +#define SATA_AHCI_VENDOR_PP5C_RIT_MASK 0x000FFFFFU + +/*RCT: Rate Change Timer, a value based on the 54.2us for which a SATA device will transmit at a fixed rate ALIGNp after OOB ha + completed, for a fast SERDES it is suggested that this value be 54.2us / 4*/ +#undef SATA_AHCI_VENDOR_PP5C_RCT_DEFVAL +#undef SATA_AHCI_VENDOR_PP5C_RCT_SHIFT +#undef SATA_AHCI_VENDOR_PP5C_RCT_MASK +#define SATA_AHCI_VENDOR_PP5C_RCT_DEFVAL 0x3FFC96A4 +#define SATA_AHCI_VENDOR_PP5C_RCT_SHIFT 20 +#define SATA_AHCI_VENDOR_PP5C_RCT_MASK 0xFFF00000U #undef CRL_APB_RST_LPD_TOP_OFFSET #define CRL_APB_RST_LPD_TOP_OFFSET 0XFF5E023C #undef CRL_APB_RST_LPD_IOU0_OFFSET @@ -26143,6 +27842,13 @@ extern "C" { int psu_init (); unsigned long psu_ps_pl_isolation_removal_data(); unsigned long psu_ps_pl_reset_config_data(); + int psu_protection(); + int psu_fpd_protection(); + int psu_ocm_protection(); + int psu_ddr_protection(); + int psu_lpd_protection(); + int psu_protection_lock(); + unsigned long psu_apply_master_tz(); #ifdef __cplusplus } #endif diff --git a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/system.hdf b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/system.hdf index be53aba19..01f637605 100644 Binary files a/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/system.hdf and b/FreeRTOS/Demo/CORTEX_R5_UltraScale_MPSoC/ZynqMP_ZCU102_hw_platform/system.hdf differ