From: Heiko Schocher Date: Tue, 11 Apr 2006 12:53:29 +0000 (+0200) Subject: * Fix dbau1x00 Board X-Git-Tag: LABEL_2006_04_18_1106~2^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ad88297e2f14220f34417d1304d256285887aed4;p=u-boot * Fix dbau1x00 Board - Fix dbau1x00 boards broken by dbau1550 patch PLL:s were not set for boards other than 1550. Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. Default boot is now bootp for cards other than 1550. Patch by Thomas Lange Aug 10 2005 --- diff --git a/CHANGELOG b/CHANGELOG index 216cb633f7..e006f0e9d0 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,6 +1,12 @@ ====================================================================== Changes since U-Boot 1.1.4: ====================================================================== +* Fix dbau1x00 Board + - Fix dbau1x00 boards broken by dbau1550 patch + PLL:s were not set for boards other than 1550. + Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. + Default boot is now bootp for cards other than 1550. + Patch by Thomas Lange Aug 10 2005 * Fixes common/cmd_flash.c: diff --git a/board/dbau1x00/lowlevel_init.S b/board/dbau1x00/lowlevel_init.S index 7afd5840c8..14a78465f3 100644 --- a/board/dbau1x00/lowlevel_init.S +++ b/board/dbau1x00/lowlevel_init.S @@ -185,6 +185,8 @@ tlbloop: bne t0, t2, tlbloop nop +#endif /* CONFIG_DBAU1550 */ + /* First setup pll:s to make serial work ok */ /* We have a 12 MHz crystal */ li t0, SYS_CPUPLL @@ -205,6 +207,7 @@ tlbloop: sw t1, 0(t0) /* aux pll */ sync +#ifdef CONFIG_DBAU1550 /* Static memory controller */ /* RCE0 - can not change while fetching, do so from icache */ move t2, ra /* Store return address */ @@ -237,7 +240,7 @@ noCacheJump: sw t1, 0(t0) #else /* CONFIG_DBAU1550 */ li t0, MEM_STTIME0 - li t1, 0x00014C0F + li t1, 0x040181D7 sw t1, 0(t0) /* RCE0 AMD 29LV640M MirrorBit Flash */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 0a10e3c75b..4cc5085293 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -81,8 +81,7 @@ CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \ CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C)) #else /* CONFIG_DBAU1550 */ -/* Boot from Compact flash partition 2 as default */ -#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm" +#define CONFIG_BOOTCOMMAND "bootp;bootm" #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ @@ -133,8 +132,6 @@ #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */ -#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} - #else /* CONFIG_DBAU1550 */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ @@ -145,6 +142,8 @@ #endif /* CONFIG_DBAU1550 */ +#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} + #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1