From: Christopher Kilgour Date: Wed, 23 May 2012 18:05:28 +0000 (-0700) Subject: kinetis: update support for all program flash granularities X-Git-Tag: v0.6.0-rc1~49 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=aeb3c4f37e9c83e45ea1b9ef9f23bbdbb451fca2;p=openocd kinetis: update support for all program flash granularities Updates the Kinetis NOR flash support to handle all known block and sector sizes. Previously only 2kiB sectors were hard-coded, now all four known combinations non-volatile sector sizes are supported. The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is also introduced. This means each "block" of flash (in Freescale terms) is treated as a bank in OpenOCD. Correspondingly, the existing board configuration for the TWR-K60M512 eval system is updated to recognize two banks instead of one. A board config for the TWR-K60F120M is also added. Bank and sector erase and programming has been checked with both of the mentioned eval boards. Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by: Christopher Kilgour Reviewed-on: http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias Küster Reviewed-by: Jan Dakinevich Reviewed-by: Spencer Oliver --- diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c index 46d36bbb..cf36104a 100644 --- a/src/flash/nor/kinetis.c +++ b/src/flash/nor/kinetis.c @@ -5,6 +5,9 @@ * Copyright (C) 2011 sleep(5) ltd * * tomas@sleepfive.com * * * + * Copyright (C) 2012 by Christopher D. Kilgour * + * techie at whiterocker.com * + * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * @@ -28,42 +31,87 @@ #include "imp.h" #include "helper/binarybuffer.h" -struct kinetis_flash_bank { - uint32_t nvm_start; +/* + * Implementation Notes + * + * The persistent memories in the Kinetis chip families K10 through + * K70 are all manipulated with the Flash Memory Module. Some + * variants call this module the FTFE, others call it the FTFL. To + * indicate that both are considered here, we use FTFX. + * + * Within the module, according to the chip variant, the persistent + * memory is divided into what Freescale terms Program Flash, FlexNVM, + * and FlexRAM. All chip variants have Program Flash. Some chip + * variants also have FlexNVM and FlexRAM, which always appear + * together. + * + * A given Kinetis chip may have 2 or 4 blocks of flash. Here we map + * each block to a separate bank. Each block size varies by chip and + * may be determined by the read-only SIM_FCFG1 register. The sector + * size within each bank/block varies by the chip granularity as + * described below. + * + * Kinetis offers four different of flash granularities applicable + * across the chip families. The granularity is apparently reflected + * by at least the reference manual suffix. For example, for chip + * MK60FN1M0VLQ12, reference manual K60P144M150SF3RM ends in "SF3RM", + * where the "3" indicates there are four flash blocks with 4kiB + * sectors. All possible granularities are indicated below. + * + * The first half of the flash (1 or 2 blocks, depending on the + * granularity) is always Program Flash and always starts at address + * 0x00000000. The "PFLSH" flag, bit 23 of the read-only SIM_FCFG2 + * register, determines whether the second half of the flash is also + * Program Flash or FlexNVM+FlexRAM. When PFLSH is set, the second + * half of flash is Program Flash and is contiguous in the memory map + * from the first half. When PFLSH is clear, the second half of flash + * is FlexNVM and always starts at address 0x10000000. FlexRAM, which + * is also present when PFLSH is clear, always starts at address + * 0x14000000. + * + * The Flash Memory Module provides a register set where flash + * commands are loaded to perform flash operations like erase and + * program. Different commands are available depending on whether + * Program Flash or FlexNVM/FlexRAM is being manipulated. Although + * the commands used are quite consistent between flash blocks, the + * parameters they accept differ according to the flash granularity. + * Some Kinetis chips have different granularity between Program Flash + * and FlexNVM/FlexRAM, so flash command arguments may differ between + * blocks in the same chip. + * + * Although not documented as such by Freescale, it appears that bits + * 8:7 of the read-only SIM_SDID register reflect the granularity + * settings 0..3, so sector sizes and block counts are applicable + * according to the following table. + */ +const struct { + unsigned pflash_sector_size_bytes; + unsigned nvm_sector_size_bytes; + unsigned num_blocks; +} kinetis_flash_params[4] = { + { 1<<10, 1<<10, 2 }, + { 2<<10, 1<<10, 2 }, + { 2<<10, 2<<10, 2 }, + { 4<<10, 4<<10, 4 } }; -static int kinetis_get_master_bank(struct flash_bank *bank, - struct flash_bank **master_bank) -{ - *master_bank = get_flash_bank_by_name_noprobe(bank->name); - if (*master_bank == NULL) { - LOG_ERROR("master flash bank '%s' does not exist", - (char *)bank->driver_priv); - return ERROR_FLASH_OPERATION_FAILED; - } - - return ERROR_OK; -} - -static int kinetis_update_bank_info(struct flash_bank *bank) -{ - int result; - struct flash_bank *master_bank; - - result = kinetis_get_master_bank(bank, &master_bank); - - if (result != ERROR_OK) - return result; - - /* update the info we do not have */ - bank->size = master_bank->size; - bank->chip_width = master_bank->chip_width; - bank->bus_width = master_bank->bus_width; - bank->num_sectors = master_bank->num_sectors; - bank->sectors = master_bank->sectors; - - return ERROR_OK; -} +struct kinetis_flash_bank { + unsigned granularity; + unsigned bank_ordinal; + uint32_t sector_size; + uint32_t protection_size; + + uint32_t sim_sdid; + uint32_t sim_fcfg1; + uint32_t sim_fcfg2; + + enum { + FC_AUTO = 0, + FC_PFLASH, + FC_FLEX_NVM, + FC_FLEX_RAM, + } flash_class; +}; FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command) { @@ -84,76 +132,71 @@ FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command) } static int kinetis_protect(struct flash_bank *bank, int set, int first, - int last) + int last) { - int result; - struct flash_bank *master_bank; - - result = kinetis_get_master_bank(bank, &master_bank); - - if (result != ERROR_OK) - return result; - LOG_WARNING("kinetis_protect not supported yet"); + /* FIXME: TODO */ if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - return ERROR_OK; + return ERROR_FLASH_BANK_INVALID; } static int kinetis_protect_check(struct flash_bank *bank) { - int result; - struct flash_bank *master_bank; - uint8_t buffer[4]; - uint32_t fprot, psize, psec; - int i, b; + struct kinetis_flash_bank *kinfo = bank->driver_priv; if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - result = kinetis_get_master_bank(bank, &master_bank); - - if (result != ERROR_OK) - return result; - - /* read protection register FTFL_FPROT */ - result = target_read_memory(bank->target, 0x40020010, 1, 4, buffer); - - if (result != ERROR_OK) - return result; - - fprot = target_buffer_get_u32(bank->target, buffer); + if (kinfo->flash_class == FC_PFLASH) { + int result; + uint8_t buffer[4]; + uint32_t fprot, psec; + int i, b; - /* every bit protect 1/32 of the full flash */ - psize = bank->size / 32; - psec = 0; - b = 0; + /* read protection register FTFx_FPROT */ + result = target_read_memory(bank->target, 0x40020010, 1, 4, buffer); - for (i = 0; i < bank->num_sectors; i++) { - if ((fprot >> b) & 1) - bank->sectors[i].is_protected = 0; - else - bank->sectors[i].is_protected = 1; - - psec += bank->sectors[i].size; + if (result != ERROR_OK) + return result; - if (psec >= psize) { - psec = 0; - b++; + fprot = target_buffer_get_u32(bank->target, buffer); + + /* + * Every bit protects 1/32 of the full flash (not necessarily + * just this bank), but we enforce the bank ordinals for + * PFlash to start at zero. + */ + b = kinfo->bank_ordinal * (bank->size / kinfo->protection_size); + for (psec = 0, i = 0; i < bank->num_sectors; i++) { + if ((fprot >> b) & 1) + bank->sectors[i].is_protected = 0; + else + bank->sectors[i].is_protected = 1; + + psec += bank->sectors[i].size; + + if (psec >= kinfo->protection_size) { + psec = 0; + b++; + } } + } else { + LOG_ERROR("Protection checks for FlexNVM not yet supported"); + return ERROR_FLASH_BANK_INVALID; } return ERROR_OK; } -static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, - uint32_t w1, uint32_t w2) +static int kinetis_ftfx_command(struct flash_bank *bank, uint32_t w0, + uint32_t w1, uint32_t w2, uint8_t *ftfx_fstat) { uint8_t buffer[12]; int result, i; @@ -199,21 +242,19 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, /* wait for done */ for (i = 0; i < 50; i++) { result = - target_read_memory(bank->target, 0x40020000, 1, 1, buffer); + target_read_memory(bank->target, 0x40020000, 1, 1, ftfx_fstat); if (result != ERROR_OK) return result; - if (buffer[0] & 0x80) + if (*ftfx_fstat & 0x80) break; - - buffer[0] = 0x00; } - if (buffer[0] != 0x80) { + if ((*ftfx_fstat & 0xf0) != 0x80) { LOG_ERROR - ("ftfl command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X", - buffer[0], w0, w1, w2); + ("ftfx command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X", + *ftfx_fstat, w0, w1, w2); return ERROR_FLASH_OPERATION_FAILED; } @@ -223,7 +264,6 @@ static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0, static int kinetis_erase(struct flash_bank *bank, int first, int last) { - struct flash_bank *master_bank; int result, i; uint32_t w0 = 0, w1 = 0, w2 = 0; @@ -232,19 +272,20 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last) return ERROR_TARGET_NOT_HALTED; } - result = kinetis_get_master_bank(bank, &master_bank); - - if (result != ERROR_OK) - return result; - if ((first > bank->num_sectors) || (last > bank->num_sectors)) return ERROR_FLASH_OPERATION_FAILED; + /* + * FIXME: TODO: use the 'Erase Flash Block' command if the + * requested erase is PFlash or NVM and encompasses the entire + * block. Should be quicker. + */ for (i = first; i <= last; i++) { + uint8_t ftfx_fstat; /* set command and sector address */ - w0 = (0x09 << 24) | bank->sectors[i].offset; + w0 = (0x09 << 24) | (bank->base + bank->sectors[i].offset); - result = kinetis_ftfl_command(bank, w0, w1, w2); + result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat); if (result != ERROR_OK) { LOG_WARNING("erase sector %d failed", i); @@ -263,44 +304,27 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last) } static int kinetis_write(struct flash_bank *bank, uint8_t *buffer, - uint32_t offset, uint32_t count) + uint32_t offset, uint32_t count) { - struct flash_bank *master_bank; - unsigned int i, result, fallback = 0, nvm = 0; + unsigned int i, result, fallback = 0; uint8_t buf[8]; uint32_t wc, w0 = 0, w1 = 0, w2 = 0; - struct kinetis_flash_bank *kbank = (struct kinetis_flash_bank *) - bank->driver_priv; + struct kinetis_flash_bank *kinfo = bank->driver_priv; if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - result = kinetis_get_master_bank(bank, &master_bank); - - if (result != ERROR_OK) - return result; - - if (offset >= kbank->nvm_start) - nvm = 1; - - if (!nvm && (offset + count) > kbank->nvm_start) { - /* we could flash this in two goes, but if the segment - spans across the pflash/nvm boundary, something is probably - not right. - */ - LOG_ERROR("Segment spans NVM boundary"); - return ERROR_FLASH_DST_OUT_OF_BANK; - } + if (kinfo->flash_class == FC_FLEX_NVM) { + uint8_t ftfx_fstat; - if (nvm) { - LOG_DEBUG("flash write into NVM @%08X", offset); + LOG_DEBUG("flash write into FlexNVM @%08X", offset); /* make flex ram available */ w0 = (0x81 << 24) | 0x00ff0000; - result = kinetis_ftfl_command(bank, w0, w1, w2); + result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat); if (result != ERROR_OK) return ERROR_FLASH_OPERATION_FAILED; @@ -316,7 +340,7 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer, fallback = 1; LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)", - buf[0]); + buf[0]); } } else { LOG_DEBUG("flash write into PFLASH @08%X", offset); @@ -325,21 +349,24 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer, /* program section command */ if (fallback == 0) { - for (i = 0; i < count; i += (2 * 1024)) { - wc = 512; + unsigned prog_section_bytes = kinfo->sector_size >> 8; + for (i = 0; i < count; i += kinfo->sector_size) { + uint8_t ftfx_fstat; - if ((count - i) < (2 * 1024)) { + wc = kinfo->sector_size / 4; + + if ((count - i) < kinfo->sector_size) { wc = count - i; wc /= 4; } LOG_DEBUG("write section @ %08X with length %d", - offset + i, wc * 4); + offset + i, wc * 4); /* write data to flexram */ result = target_write_memory(bank->target, 0x14000000, 4, wc, - buffer + i); + buffer + i); if (result != ERROR_OK) { LOG_ERROR("target_write_memory failed"); @@ -348,201 +375,369 @@ static int kinetis_write(struct flash_bank *bank, uint8_t *buffer, } /* execute section command */ - w0 = (0x0b << 24) | (offset + i); - w1 = (256 << 16); + w0 = (0x0b << 24) | (bank->base + offset + i); + w1 = ((wc * 4 / prog_section_bytes) << 16); - result = kinetis_ftfl_command(bank, w0, w1, w2); + result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat); if (result != ERROR_OK) return ERROR_FLASH_OPERATION_FAILED; } } - /* program longword command */ - else { + /* program longword command, not supported in "SF3" devices */ + else if (kinfo->granularity != 3) { for (i = 0; i < count; i += 4) { + uint8_t ftfx_fstat; + LOG_DEBUG("write longword @ %08X", offset + i); - w0 = (0x06 << 24) | (offset + i); + w0 = (0x06 << 24) | (bank->base + offset + i); w1 = buf_get_u32(buffer + offset + i, 0, 32); - result = kinetis_ftfl_command(bank, w0, w1, w2); + result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat); if (result != ERROR_OK) return ERROR_FLASH_OPERATION_FAILED; } + } else { + LOG_ERROR("Flash write strategy not implemented"); + return ERROR_FLASH_OPERATION_FAILED; } return ERROR_OK; } -static int kinetis_probe(struct flash_bank *bank) +static int kinetis_read_part_info(struct flash_bank *bank) { - struct flash_bank *master_bank; int result, i; uint8_t buf[4]; - uint32_t sim_sdid, sim_fcfg1, sim_fcfg2, offset = 0; - uint32_t nvm_size, pf_size, ee_size; - - if (bank->target->state != TARGET_HALTED) { - LOG_ERROR("Target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - - result = kinetis_get_master_bank(bank, &master_bank); - - if (result != ERROR_OK) - return result; + uint32_t offset = 0; + uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg2_pflsh; + uint32_t nvm_size = 0, pf_size = 0, ee_size = 0; + unsigned granularity, num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0, + first_nvm_bank = 0, reassign = 0; + struct kinetis_flash_bank *kinfo = bank->driver_priv; result = target_read_memory(bank->target, 0x40048024, 1, 4, buf); if (result != ERROR_OK) return result; - sim_sdid = target_buffer_get_u32(bank->target, buf); + kinfo->sim_sdid = target_buffer_get_u32(bank->target, buf); + granularity = (kinfo->sim_sdid >> 7) & 0x03; result = target_read_memory(bank->target, 0x4004804c, 1, 4, buf); if (result != ERROR_OK) return result; - sim_fcfg1 = target_buffer_get_u32(bank->target, buf); + kinfo->sim_fcfg1 = target_buffer_get_u32(bank->target, buf); result = target_read_memory(bank->target, 0x40048050, 1, 4, buf); if (result != ERROR_OK) return result; - sim_fcfg2 = target_buffer_get_u32(bank->target, buf); + kinfo->sim_fcfg2 = target_buffer_get_u32(bank->target, buf); + fcfg2_pflsh = (kinfo->sim_fcfg2 >> 23) & 0x01; - LOG_DEBUG("SDID: %08X FCFG1: %08X FCFG2: %08X", sim_sdid, sim_fcfg1, - sim_fcfg2); + LOG_DEBUG("SDID: %08X FCFG1: %08X FCFG2: %08X", kinfo->sim_sdid, + kinfo->sim_fcfg1, kinfo->sim_fcfg2); - switch ((sim_fcfg1 >> 28) & 0x0f) { - case 0x07: - nvm_size = 128 * 1024; - break; - case 0x09: - case 0x0f: - nvm_size = 256 * 1024; - break; - default: - nvm_size = 0; - break; - } + fcfg1_nvmsize = (uint8_t)((kinfo->sim_fcfg1 >> 28) & 0x0f); + fcfg1_pfsize = (uint8_t)((kinfo->sim_fcfg1 >> 24) & 0x0f); + fcfg1_eesize = (uint8_t)((kinfo->sim_fcfg1 >> 16) & 0x0f); - switch ((sim_fcfg1 >> 24) & 0x0f) { + /* when the PFLSH bit is set, there is no FlexNVM/FlexRAM */ + if (!fcfg2_pflsh) { + switch (fcfg1_nvmsize) { + case 0x03: case 0x07: - pf_size = 128 * 1024; - break; case 0x09: - pf_size = 256 * 1024; - break; case 0x0b: + nvm_size = 1 << (14 + (fcfg1_nvmsize >> 1)); + break; case 0x0f: - pf_size = 512 * 1024; + if (granularity == 3) + nvm_size = 512<<10; + else + nvm_size = 256<<10; break; default: - pf_size = 0; + nvm_size = 0; break; - } + } - switch ((sim_fcfg1 >> 16) & 0x0f) { + switch (fcfg1_eesize) { + case 0x00: + case 0x01: case 0x02: - ee_size = 4 * 1024; - break; case 0x03: - ee_size = 2 * 1024; - break; case 0x04: - ee_size = 1 * 1024; - break; case 0x05: - ee_size = 512; - break; case 0x06: - ee_size = 256; - break; case 0x07: - ee_size = 128; - break; case 0x08: - ee_size = 64; - break; case 0x09: - ee_size = 32; + ee_size = (16 << (10 - fcfg1_eesize)); break; default: ee_size = 0; break; + } } - ((struct kinetis_flash_bank *) bank->driver_priv)->nvm_start = - pf_size - nvm_size; + switch (fcfg1_pfsize) { + case 0x03: + case 0x05: + case 0x07: + case 0x09: + case 0x0b: + case 0x0d: + pf_size = 1 << (14 + (fcfg1_pfsize >> 1)); + break; + case 0x0f: + if (granularity == 3) + pf_size = 1024<<10; + else if (fcfg2_pflsh) + pf_size = 512<<10; + else + pf_size = 256<<10; + break; + default: + pf_size = 0; + break; + } + + LOG_DEBUG("FlexNVM: %d PFlash: %d FlexRAM: %d PFLSH: %d", + nvm_size, pf_size, ee_size, fcfg2_pflsh); + + num_blocks = kinetis_flash_params[granularity].num_blocks; + num_pflash_blocks = num_blocks / (2 - fcfg2_pflsh); + first_nvm_bank = num_pflash_blocks; + num_nvm_blocks = num_blocks - num_pflash_blocks; + + LOG_DEBUG("%d blocks total: %d PFlash, %d FlexNVM", + num_blocks, num_pflash_blocks, num_nvm_blocks); + + /* + * If the flash class is already assigned, verify the + * parameters. + */ + if (kinfo->flash_class != FC_AUTO) { + if (kinfo->bank_ordinal != (unsigned) bank->bank_number) { + LOG_WARNING("Flash ordinal/bank number mismatch"); + reassign = 1; + } else if (kinfo->granularity != granularity) { + LOG_WARNING("Flash granularity mismatch"); + reassign = 1; + } else { + switch (kinfo->flash_class) { + case FC_PFLASH: + if (kinfo->bank_ordinal >= first_nvm_bank) { + LOG_WARNING("Class mismatch, bank %d is not PFlash", + bank->bank_number); + reassign = 1; + } else if (bank->size != (pf_size / num_pflash_blocks)) { + LOG_WARNING("PFlash size mismatch"); + reassign = 1; + } else if (bank->base != + (0x00000000 + bank->size * kinfo->bank_ordinal)) { + LOG_WARNING("PFlash address range mismatch"); + reassign = 1; + } else if (kinfo->sector_size != + kinetis_flash_params[granularity].pflash_sector_size_bytes) { + LOG_WARNING("PFlash sector size mismatch"); + reassign = 1; + } else { + LOG_DEBUG("PFlash bank %d already configured okay", + kinfo->bank_ordinal); + } + break; + case FC_FLEX_NVM: + if ((kinfo->bank_ordinal >= num_blocks) || + (kinfo->bank_ordinal < first_nvm_bank)) { + LOG_WARNING("Class mismatch, bank %d is not FlexNVM", + bank->bank_number); + reassign = 1; + } else if (bank->size != (nvm_size / num_nvm_blocks)) { + LOG_WARNING("FlexNVM size mismatch"); + reassign = 1; + } else if (bank->base != + (0x10000000 + bank->size * kinfo->bank_ordinal)) { + LOG_WARNING("FlexNVM address range mismatch"); + reassign = 1; + } else if (kinfo->sector_size != + kinetis_flash_params[granularity].nvm_sector_size_bytes) { + LOG_WARNING("FlexNVM sector size mismatch"); + reassign = 1; + } else { + LOG_DEBUG("FlexNVM bank %d already configured okay", + kinfo->bank_ordinal); + } + break; + case FC_FLEX_RAM: + if (kinfo->bank_ordinal != num_blocks) { + LOG_WARNING("Class mismatch, bank %d is not FlexRAM", + bank->bank_number); + reassign = 1; + } else if (bank->size != ee_size) { + LOG_WARNING("FlexRAM size mismatch"); + reassign = 1; + } else if (bank->base != 0x14000000) { + LOG_WARNING("FlexRAM address mismatch"); + reassign = 1; + } else if (kinfo->sector_size != + kinetis_flash_params[granularity].nvm_sector_size_bytes) { + LOG_WARNING("FlexRAM sector size mismatch"); + reassign = 1; + } else { + LOG_DEBUG("FlexRAM bank %d already configured okay", + kinfo->bank_ordinal); + } + default: + LOG_WARNING("Unknown or inconsistent flash class"); + reassign = 1; + break; + } + } + } else { + LOG_INFO("Probing flash info for bank %d", bank->bank_number); + reassign = 1; + } - LOG_DEBUG("NVM: %d PF: %d EE: %d BL1: %d", nvm_size, pf_size, ee_size, - (sim_fcfg2 >> 23) & 1); + if (!reassign) + return ERROR_OK; + + kinfo->granularity = granularity; + + if ((unsigned)bank->bank_number < num_pflash_blocks) { + /* pflash, banks start at address zero */ + kinfo->flash_class = FC_PFLASH; + bank->size = (pf_size / num_pflash_blocks); + bank->base = 0x00000000 + bank->size * bank->bank_number; + kinfo->sector_size = kinetis_flash_params[granularity].pflash_sector_size_bytes; + kinfo->protection_size = pf_size / 32; + } else if ((unsigned)bank->bank_number < num_blocks) { + /* nvm, banks start at address 0x10000000 */ + kinfo->flash_class = FC_FLEX_NVM; + bank->size = (nvm_size / num_nvm_blocks); + bank->base = 0x10000000 + bank->size * (bank->bank_number - first_nvm_bank); + kinfo->sector_size = kinetis_flash_params[granularity].nvm_sector_size_bytes; + kinfo->protection_size = 0; /* FIXME: TODO: depends on DEPART bits, chip */ + } else if ((unsigned)bank->bank_number == num_blocks) { + LOG_ERROR("FlexRAM support not yet implemented"); + return ERROR_FLASH_OPER_UNSUPPORTED; + } else { + LOG_ERROR("Cannot determine parameters for bank %d, only %d banks on device", + bank->bank_number, num_blocks); + return ERROR_FLASH_BANK_INVALID; + } - if (pf_size != bank->size) { - LOG_WARNING("flash size is different %d != %d", pf_size, - bank->size); + if (bank->sectors) { + free(bank->sectors); + bank->sectors = NULL; } - bank->num_sectors = bank->size / (2 * 1024); + bank->num_sectors = bank->size / kinfo->sector_size; assert(bank->num_sectors > 0); bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); for (i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = offset; - bank->sectors[i].size = 2 * 1024; - offset += bank->sectors[i].size; + bank->sectors[i].size = kinfo->sector_size; + offset += kinfo->sector_size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - /* update the info we do not have */ - return kinetis_update_bank_info(bank); + return ERROR_OK; +} + +static int kinetis_probe(struct flash_bank *bank) +{ + if (bank->target->state != TARGET_HALTED) { + LOG_WARNING("Cannot communicate... target not halted."); + return ERROR_TARGET_NOT_HALTED; + } + + return kinetis_read_part_info(bank); } static int kinetis_auto_probe(struct flash_bank *bank) { + struct kinetis_flash_bank *kinfo = bank->driver_priv; + + if (kinfo->sim_sdid) + return ERROR_OK; + return kinetis_probe(bank); } static int kinetis_info(struct flash_bank *bank, char *buf, int buf_size) { - int result; - struct flash_bank *master_bank; - - result = kinetis_get_master_bank(bank, &master_bank); + const char *bank_class_names[] = { + "(ANY)", "PFlash", "FlexNVM", "FlexRAM" + }; - if (result != ERROR_OK) - return result; + struct kinetis_flash_bank *kinfo = bank->driver_priv; - snprintf(buf, buf_size, - "%s driver for flash bank %s at 0x%8.8" PRIx32 "", - bank->driver->name, master_bank->name, master_bank->base); + (void) snprintf(buf, buf_size, + "%s driver for %s flash bank %s at 0x%8.8" PRIx32 "", + bank->driver->name, bank_class_names[kinfo->flash_class], + bank->name, bank->base); return ERROR_OK; } static int kinetis_blank_check(struct flash_bank *bank) { - int result; - struct flash_bank *master_bank; - - LOG_WARNING("kinetis_blank_check not supported yet"); + struct kinetis_flash_bank *kinfo = bank->driver_priv; if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - result = kinetis_get_master_bank(bank, &master_bank); + if (kinfo->flash_class == FC_PFLASH) { + int result; + uint32_t w0 = 0, w1 = 0, w2 = 0; + uint8_t ftfx_fstat; - if (result != ERROR_OK) - return result; + /* check if whole bank is blank */ + w0 = (0x00 << 24) | bank->base; + w1 = 0; /* "normal margin" */ + + result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat); + + if (result != ERROR_OK) + return result; + + if (ftfx_fstat & 0x01) { + /* the whole bank is not erased, check sector-by-sector */ + int i; + for (i = 0; i < bank->num_sectors; i++) { + w0 = (0x01 << 24) | (bank->base + bank->sectors[i].offset); + w1 = (0x100 << 16) | 0; /* normal margin */ + + result = kinetis_ftfx_command(bank, w0, w1, w2, &ftfx_fstat); + + if (result == ERROR_OK) { + bank->sectors[i].is_erased = !(ftfx_fstat & 0x01); + } else { + LOG_DEBUG("Ignoring errored PFlash sector blank-check"); + bank->sectors[i].is_erased = -1; + } + } + } else { + /* the whole bank is erased, update all sectors */ + int i; + for (i = 0; i < bank->num_sectors; i++) + bank->sectors[i].is_erased = 1; + } + } else { + LOG_WARNING("kinetis_blank_check not supported yet for FlexNVM"); + return ERROR_FLASH_OPERATION_FAILED; + } return ERROR_OK; } static int kinetis_flash_read(struct flash_bank *bank, - uint8_t *buffer, uint32_t offset, uint32_t count) + uint8_t *buffer, uint32_t offset, uint32_t count) { - int result; - struct flash_bank *master_bank; - LOG_WARNING("kinetis_flash_read not supported yet"); if (bank->target->state != TARGET_HALTED) { @@ -550,12 +745,7 @@ static int kinetis_flash_read(struct flash_bank *bank, return ERROR_TARGET_NOT_HALTED; } - result = kinetis_get_master_bank(bank, &master_bank); - - if (result != ERROR_OK) - return result; - - return ERROR_OK; + return ERROR_FLASH_OPERATION_FAILED; } struct flash_driver kinetis_flash = { diff --git a/tcl/board/twr-k60f120m.cfg b/tcl/board/twr-k60f120m.cfg new file mode 100644 index 00000000..119eb747 --- /dev/null +++ b/tcl/board/twr-k60f120m.cfg @@ -0,0 +1,17 @@ +# +# Freescale TWRK60F120M development board +# + +source [find target/k60.cfg] + +$_TARGETNAME configure -event reset-init { + puts "-event reset-init occured" +} + +# +# Bank definition for the 'program flash' (instructions and/or data) +# +flash bank pflash.0 kinetis 0x00000000 0x40000 0 4 $_TARGETNAME +flash bank pflash.1 kinetis 0x00040000 0x40000 0 4 $_TARGETNAME +flash bank pflash.2 kinetis 0x00080000 0x40000 0 4 $_TARGETNAME +flash bank pflash.3 kinetis 0x000c0000 0x40000 0 4 $_TARGETNAME diff --git a/tcl/board/twr-k60n512.cfg b/tcl/board/twr-k60n512.cfg index 4fe35bb0..3b3b02f9 100644 --- a/tcl/board/twr-k60n512.cfg +++ b/tcl/board/twr-k60n512.cfg @@ -11,4 +11,5 @@ $_TARGETNAME configure -event reset-init { # # Bank definition for the 'program flash' (instructions and/or data) # -flash bank pflash.pflash kinetis 0x00000000 0x80000 0 4 $_TARGETNAME +flash bank pflash.0 kinetis 0x00000000 0x40000 0 4 $_TARGETNAME +flash bank pflash.1 kinetis 0x00040000 0x40000 0 4 $_TARGETNAME