From: Peng Fan Date: Thu, 11 Aug 2016 06:02:55 +0000 (+0800) Subject: arm: dts: add device tree for i.MX6ULL X-Git-Tag: v2016.11-rc2~19^2~24 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b0a8e454510e5c4a00ccc4cbc0ec1c19ac520ed6;p=u-boot arm: dts: add device tree for i.MX6ULL Add device tree for i.MX6ULL. Signed-off-by: Peng Fan Cc: Simon Glass Cc: Stefano Babic --- diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi new file mode 100644 index 0000000000..65950e8019 --- /dev/null +++ b/arch/arm/dts/imx6ull.dtsi @@ -0,0 +1,1161 @@ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include "imx6ull-pinfunc.h" +#include "imx6ull-pinfunc-snvs.h" +#include "skeleton.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-latency = <61036>; /* two CLK32 periods */ + operating-points = < + /* kHz uV */ + 528000 1175000 + 99000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 528000 1175000 + 99000 1175000 + >; + clocks = <&clks IMX6UL_CLK_ARM>, + <&clks IMX6UL_CLK_PLL2_BUS>, + <&clks IMX6UL_CLK_PLL2_PFD2>, + <&clks IMX6UL_CA7_SECONDARY_SEL>, + <&clks IMX6UL_CLK_STEP>, + <&clks IMX6UL_CLK_PLL1_SW>, + <&clks IMX6UL_CLK_PLL1_SYS>, + <&clks IMX6UL_PLL1_BYPASS>, + <&clks IMX6UL_CLK_PLL1>, + <&clks IMX6UL_PLL1_BYPASS_SRC>, + <&clks IMX6UL_CLK_OSC>; + clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step", + "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc"; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a02000 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + busfreq { + compatible = "fsl,imx_busfreq"; + clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>, + <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>, + <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>, + <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>, + <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>, + <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>, + <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>, + <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>, + <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>, + <&clks IMX6UL_CLK_PLL1>; + clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg", + "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc", + "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel", + "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1"; + fsl,max_ddr_freq = <400000000>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + status = "disabled"; + }; + + ocrams: sram@00900000 { + compatible = "fsl,lpm-sram"; + reg = <0x00900000 0x4000>; + }; + + ocrams_ddr: sram@00904000 { + compatible = "fsl,ddr-lpm-sram"; + reg = <0x00904000 0x1000>; + }; + + ocram: sram@00905000 { + compatible = "mmio-sram"; + reg = <0x00905000 0x1B000>; + }; + + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = , + , + , + ; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6UL_CLK_APBHDMA>; + }; + + gpmi: gpmi-nand@01806000{ + compatible = "fsl,imx6ull-gpmi-nand", "fsl, imx6ul-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = ; + interrupt-names = "bch"; + clocks = <&clks IMX6UL_CLK_GPMI_IO>, + <&clks IMX6UL_CLK_GPMI_APB>, + <&clks IMX6UL_CLK_GPMI_BCH>, + <&clks IMX6UL_CLK_GPMI_BCH_APB>, + <&clks IMX6UL_CLK_PER_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = ; + dmas = <&sdma 41 18 0>, + <&sdma 42 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>, + <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_SPDIF>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI1>, + <&clks IMX6UL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI2>, + <&clks IMX6UL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI3>, + <&clks IMX6UL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ECSPI4>, + <&clks IMX6UL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart7: serial@02018000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART7_IPG>, + <&clks IMX6UL_CLK_UART7_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 43 4 0>, <&sdma 44 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART1_IPG>, + <&clks IMX6UL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + esai: esai@02024000 { + compatible = "fsl,imx6ull-esai"; + reg = <0x02024000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ESAI_IPG>, + <&clks IMX6UL_CLK_ESAI_MEM>, + <&clks IMX6UL_CLK_ESAI_EXTAL>, + <&clks IMX6UL_CLK_ESAI_IPG>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "core", "mem", "extal", + "fsys", "dma"; + dmas = <&sdma 0 21 0>, <&sdma 47 21 0>; + dma-names = "rx", "tx"; + dma-source = <&gpr 0 14 0 15>; + status = "disabled"; + }; + + sai1: sai@02028000 { + compatible = "fsl,imx6ul-sai", + "fsl,imx6sx-sai"; + reg = <0x02028000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SAI1_IPG>, + <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SAI1>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 35 24 0>, <&sdma 36 24 0>; + status = "disabled"; + }; + + sai2: sai@0202c000 { + compatible = "fsl,imx6ul-sai", + "fsl,imx6sx-sai"; + reg = <0x0202c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SAI2_IPG>, + <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 37 24 0>, <&sdma 38 24 0>; + status = "disabled"; + }; + + sai3: sai@02030000 { + compatible = "fsl,imx6ul-sai", + "fsl,imx6sx-sai"; + reg = <0x02030000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SAI3_IPG>, + <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_SAI3>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 39 24 0>, <&sdma 40 24 0>; + status = "disabled"; + }; + + asrc: asrc@02034000 { + compatible = "fsl,imx53-asrc"; + reg = <0x02034000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ASRC_IPG>, + <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "dma"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + status = "okay"; + }; + }; + + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + status = "disabled"; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_PWM1>, + <&clks IMX6UL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_PWM3>, + <&clks IMX6UL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + flexcan1: can@02090000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, + <&clks IMX6UL_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 1 0x10 17>; + status = "disabled"; + }; + + flexcan2: can@02094000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_CAN2_IPG>, + <&clks IMX6UL_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 2 0x10 18>; + status = "disabled"; + }; + + gpt1: gpt@02098000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt"; + reg = <0x02098000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_GPT1_BUS>, + <&clks IMX6UL_CLK_GPT1_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + snvslp: snvs@020b0000 { + compatible = "fsl,imx6ul-snvs"; + reg = <0x020b0000 0x4000>; + interrupts = ; + }; + + fec2: ethernet@020b4000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x020b4000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET2_REF_125M>, + <&clks IMX6UL_CLK_ENET2_REF_125M>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + stop-mode = <&gpr 0x10 4>; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + fsl,magic-packet; + fsl,wakeup_irq = <0>; + status = "disabled"; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_WDOG1>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = , + , + ; + + reg_3p0: regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBPHY2>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupts = ; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = , ; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = ; + linux,keycode = ; + wakeup; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = ; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = ; + }; + + src: src@020d8000 { + compatible = "fsl,imx6ul-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = , + ; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6ul-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6ul-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + mqs: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + status = "disabled"; + }; + + gpt2: gpt@020e8000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt"; + reg = <0x020e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_SDMA>, + <&clks IMX6UL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + pwm5: pwm@020f0000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@020f4000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@020f8000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@020fc000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020fc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + fec1: ethernet@02188000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET_REF>, + <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + stop-mode = <&gpr 0x10 3>; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + fsl,magic-packet; + fsl,wakeup_irq = <0>; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + adc1: adc@02198000 { + compatible = "fsl,imx6ul-adc", "fsl,vf610-adc"; + reg = <0x02198000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ADC1>; + num-channels = <2>; + clock-names = "adc"; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C3>; + status = "disabled"; + }; + + romcp@021ac000 { + compatible = "fsl,imx6ul-romcp", "syscon"; + reg = <0x021ac000 0x4000>; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + weim: weim@021b8000 { + compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>; + }; + + ocotp: ocotp-ctrl@021bc000 { + compatible = "fsl,imx6ull-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6UL_CLK_OCOTP>; + }; + + csu: csu@021c0000 { + compatible = "fsl,imx6ul-csu"; + reg = <0x021c0000 0x4000>; + interrupts = ; + status = "disabled"; + }; + + csi: csi@021c4000 { + compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi"; + reg = <0x021c4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_CSI>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + lcdif: lcdif@021c8000 { + compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + reg = <0x021c8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, + <&clks IMX6UL_CLK_LCDIF_APB>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + pxp: pxp@021cc000 { + compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma"; + reg = <0x021cc000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>; + clock-names = "pxp_ipg", "pxp_axi"; + status = "disabled"; + }; + + qspi: qspi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clocks = <&clks IMX6UL_CLK_QSPI>, + <&clks IMX6UL_CLK_QSPI>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART2_IPG>, + <&clks IMX6UL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART3_IPG>, + <&clks IMX6UL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART4_IPG>, + <&clks IMX6UL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART5_IPG>, + <&clks IMX6UL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_I2C4>; + status = "disabled"; + }; + + uart6: serial@021fc000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021fc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART6_IPG>, + <&clks IMX6UL_CLK_UART6_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + aips3: aips-bus@02200000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02200000 0x100000>; + ranges; + + dcp: dcp@02280000 { + reg = <0x02280000 0x4000>; + interrupts = , + , + ; + /*clocks = <&clks IMX6UL_CLK_DCP>;*/ + clock-names = "dcp"; + status = "disabled"; + }; + + rngb: rngb@02284000 { + reg = <0x02284000 0x4000>; + interrupts = ; + }; + + uart8: serial@02288000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02288000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_UART8_IPG>, + <&clks IMX6UL_CLK_UART8_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 45 4 0>, <&sdma 46 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + epdc: epdc@0228c000 { + compatible = "fsl,imx7d-epdc"; + interrupts = ; + reg = <0x0228c000 0x4000>; + clocks = <&clks IMX6UL_CLK_EPDC_ACLK>, + <&clks IMX6UL_CLK_EPDC_PIX>; + clock-names = "epdc_axi", "epdc_pix"; + /* Need to fix epdc-ram */ + /* epdc-ram = <&gpr 0x4 30>; */ + status = "disabled"; + }; + + iomuxc_snvs: iomuxc-snvs@02290000 { + compatible = "fsl,imx6ull-iomuxc-snvs"; + reg = <0x02290000 0x10000>; + }; + + snvs_gpr: snvs-gpr@0x02294000 { + compatible = "fsl, imx6ull-snvs-gpr"; + reg = <0x02294000 0x10000>; + }; + }; + }; +};