From: Nicolas Boichat Date: Sat, 30 Jul 2005 23:36:30 +0000 (+0000) Subject: Update DVD documentation. X-Git-Tag: Release-1.38.0~229 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b1b50a3bc97cb6afbb1187075b93de990f7adc08;p=bacula%2Fdocs Update DVD documentation. --- diff --git a/docs/manual/dvd.tex b/docs/manual/dvd.tex index 442a81f3..a212cd5a 100644 --- a/docs/manual/dvd.tex +++ b/docs/manual/dvd.tex @@ -90,15 +90,15 @@ Device resource. \index[sd]{Write Part Command } Command that must be executed to write a part to the device. Before the command is executed, \%a is replaced with the Archive Device, \%m with the - Mount Point, \%n with the current part number (0-based), and \%v with the - current part filename. + Mount Point, \%e is replaced with 1 if we are writing the first part, + and with 0 otherwise, and \%v with the current part filename. For a DVD, you will most frequently specify the Bacula supplied {\bf dvd-writepart} script as follows: \footnotesize \begin{verbatim} - Write Part Command = "/path/dvd-writepart %n %a %v" + Write Part Command = "/path/dvd-writepart %e %a %v" \end{verbatim} \normalsize @@ -112,16 +112,16 @@ Device resource. \item [Free Space Command = {\it name-string}] \index[sd]{Free Space Command } Command that must be executed to check how much free space is left on the - device. Before the command is executed, \%a is replaced with the Archive - Device, \%m with the Mount Point, \%n with the current part number (0-based), - and \%v with the current part filename. + device. Before the command is executed,\%a is replaced with the Archive + Device, \%m with the Mount Point, \%e is replaced with 1 if we are writing + the first part, and with 0 otherwise, and \%v with the current part filename. For a DVD, you will most frequently specify the Bacula supplied {\bf dvd-freespace} script as follows: \footnotesize \begin{verbatim} - Free Space Command = "/path/dvd-freespace %n %a" + Free Space Command = "/path/dvd-freespace %a" \end{verbatim} \normalsize @@ -185,19 +185,51 @@ The following directives are added to the Director's Job resource. \addcontentsline{toc}{subsection}{Other Points} \begin{itemize} -\item DVD+RW supports only about 1000 overwrites, so every time you - mount the filesystem read/write will count as one write. This can - add up quickly, so it is best to mount your DVD+RW filesystem read-only. - Bacula does not need the DVD to be mounted read-write, since it uses - the raw device for writing. -\item Reformating DVD+RW 10-20 time can apparently make the medium - unusable. Normally you should not have to format or reformat - DVD+RW media. If it is necessary, current versions of growisofs will - do so automatically. -\item If you wish to blank your DVD, use the following: +\item I had several problems writing to DVD-RWs (this does NOT concern DVD+RW), +because these media have two writing-modes: {\bf Incremental Sequential} and +{\bf Restricted Overwrite}. Depending on your device and the media you use, +one of these modes may not work correctly (e.g. {\bf Incremental Sequential} does +not work with my NEC DVD-writer and Verbatim DVD-RW). + +To retrieve the current mode of a DVD-RW, run: +\begin{verbatim} + dvd+rw-mediainfo /dev/xxx +\end{verbatim} +where you replace xxx with your DVD device name. + +{\bf Mounted Media} line should give you the information. + +To set the device to {\bf Restricted Overwrite} mode, run: +\begin{verbatim} + dvd+rw-format /dev/xxx +\end{verbatim} +If you want to set it back to the default {\bf Incremental Sequential} mode, run: +\begin{verbatim} + dvd+rw-format -blank /dev/xxx +\end{verbatim} + +\item Bacula only accepts to write to blank DVDs. To quick blank a DVD+/-RW, run +this command: +\begin{verbatim} + dd if=/dev/zero bs=1024 count=512 | growisofs -Z /dev/xxx=/dev/fd/0 +\end{verbatim} +Then, try to mount the device, if it cannot be mounted, it will be considered +as blank by Bacula, if it can be mounted, try a full blank (see below). + +\item If you wish to blank completely a DVD+/-RW, use the following: \begin{verbatim} growisofs -Z /dev/xxx=/dev/zero \end{verbatim} where you replace xxx with your DVD device name. However, note that this blanks the whole DVD, which takes quite a long time (16 minutes on mine). +\item DVD+RW and DVD-RW support only about 1000 overwrites (i.e. don't use the +same medium for years if you don't want to have problems...). + +\item Reformating DVD+RW 10-20 time can apparently make the medium + unusable. Normally you should not have to format or reformat + DVD+RW media. If it is necessary, current versions of growisofs will + do so automatically. + +\item For more informations about DVD writing, please look at the +\elink{dvd+rw-tools homepage}{http://fy.chalmers.se/~appro/linux/DVD+RW/}. \end{itemize} diff --git a/docs/manual/requirements.tex b/docs/manual/requirements.tex index b3f757e3..826f0996 100644 --- a/docs/manual/requirements.tex +++ b/docs/manual/requirements.tex @@ -38,8 +38,8 @@ need them both loaded. On RedHat systems, the C++ compiler is part of the also runs under GNOME 1.4 but this version is deprecated and thus no longer maintained. \item The wxWidgets Console program is developed and tested with the latest - stable ANSI (not Unicode) version of - \elink{wxWidgets}{http://www.wxwidgets.org/} (2.6.0). It works fine with the + stable ANSI or Unicode version of + \elink{wxWidgets}{http://www.wxwidgets.org/} (2.6.1). It works fine with the Windows and GTK+-2.x version of wxWidgets, and should also work on other platforms supported by wxWidgets. \item The Tray Monitor program is developed for GTK+-2.x. It needs Gnome less diff --git a/docs/manual/storedconf.tex b/docs/manual/storedconf.tex index 93c070b6..4e44c9f3 100644 --- a/docs/manual/storedconf.tex +++ b/docs/manual/storedconf.tex @@ -809,15 +809,15 @@ Bacula version 1.37 and later. \index[sd]{Write Part Command } Command that must be executed to write a part to the device. Before the command is executed, \%a is replaced with the Archive Device, \%m with the - Mount Point, \%n with the current part number (0-based), and \%v with the - current part filename. + Mount Point, \%e is replaced with 1 if we are writing the first part, + and with 0 otherwise, and \%v with the current part filename. For a DVD, you will most frequently specify the Bacula supplied {\bf dvd-writepart} script as follows: \footnotesize \begin{verbatim} - Write Part Command = "/path/dvd-writepart %n %a %v" + Write Part Command = "/path/dvd-writepart %e %a %v" \end{verbatim} \normalsize @@ -831,16 +831,16 @@ Bacula version 1.37 and later. \item [Free Space Command = {\it name-string}] \index[sd]{Free Space Command } Command that must be executed to check how much free space is left on the - device. Before the command is executed, \%a is replaced with the Archive - Device, \%m with the Mount Point, \%n with the current part number (0-based), - and \%v with the current part filename. + device. Before the command is executed,\%a is replaced with the Archive + Device, \%m with the Mount Point, \%e is replaced with 1 if we are writing + the first part, and with 0 otherwise, and \%v with the current part filename. For a DVD, you will most frequently specify the Bacula supplied {\bf dvd-freespace} script as follows: \footnotesize \begin{verbatim} - Free Space Command = "/path/dvd-freespace %n %a" + Free Space Command = "/path/dvd-freespace %a" \end{verbatim} \normalsize @@ -1032,8 +1032,8 @@ Device { # MountCommand = "/bin/mount -t iso9660 -o ro %a %m"; # UnmountCommand = "/bin/umount %m"; # SpoolDirectory = /tmp/backup; -# WritePartCommand = "/etc/bacula/dvd-writepart %n %a %v" -# FreeSpaceCommand = "/etc/bacula/dvd-freespace %a %n" +# WritePartCommand = "/etc/bacula/dvd-writepart %e %a %v" +# FreeSpaceCommand = "/etc/bacula/dvd-freespace %a" #} # # A very old Exabyte with no end of media detection