From: Simon Glass Date: Mon, 3 Oct 2016 00:01:08 +0000 (-0600) Subject: atmel: Drop README.at91-soc X-Git-Tag: v2016.11-rc2~66 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b44b632a68bf9c3425225e8cab8289f981f1ad33;p=u-boot atmel: Drop README.at91-soc This issue covered by this doc appears to be fixed, so let's remove the README. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: York Sun Acked-by: Andreas Bießmann --- diff --git a/doc/README.at91-soc b/doc/README.at91-soc deleted file mode 100644 index 9a9f74e234..0000000000 --- a/doc/README.at91-soc +++ /dev/null @@ -1,48 +0,0 @@ - New C structure AT91 SoC access -================================= - -The goal --------- - -Currently the at91 arch uses hundreds of address defines and special -at91_xxxx_write/read functions to access the SOC. -The u-boot project perferred method is to access memory mapped hw -regisister via a c structure. - -e.g. old - - *AT91C_PIOA_IDR = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK; - *AT91C_PIOC_PUDR = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK; - *AT91C_PIOC_PER = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK; - *AT91C_PIOC_OER = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK; - *AT91C_PIOC_PIO = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK; - - at91_sys_write(AT91_RSTC_CR, - AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); - -e.g new - pin = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK; - writel(pin, &pio->pioa.idr); - writel(pin, &pio->pioa.pudr); - writel(pin, &pio->pioa.per); - writel(pin, &pio->pioa.oer); - writel(pin, &pio->pioa.sodr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_PROCRST | - AT91_RSTC_CR_PERRST, &rstc->cr); - -The method for updating ------------------------- - -1. add's the temporary CONFIG_AT91_LEGACY to all at91 board configs -2. Display a compile time warning, if the board has not been converted -3. add new structures for SoC access -4. Convert arch, driver and boards file to new SoC -5. remove legacy code, if all boards and drives are ready - -2013-10-30 Andreas Bießmann : - -The goal is almost reached, we could remove the CONFIG_AT91_LEGACY switch but -remain the CONFIG_ATMEL_LEGACY switch until the GPIO disaster is fixed. The -AT91 spi driver has also some CONFIG_ATMEL_LEGACY stuff left, so another point -to fix until this README can be removed.