From: Stefan Roese Date: Fri, 2 Oct 2015 06:20:37 +0000 (+0200) Subject: ppc4xx: Remove lcd4_lwmon5 support X-Git-Tag: v2015.10-rc5~13 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b6b5e394db62ac17e496dce9e6e9451435c8be62;p=u-boot ppc4xx: Remove lcd4_lwmon5 support This platform has not gone into production. So lets remove it. Signed-off-by: Stefan Roese Cc: Masahiro Yamada --- diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 8d3ba8d73f..ce58d86512 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -10,7 +10,6 @@ choice config TARGET_LWMON5 bool "Support lwmon5" - select SUPPORT_SPL config TARGET_T3CORP bool "Support t3corp" diff --git a/board/lwmon5/MAINTAINERS b/board/lwmon5/MAINTAINERS index 7402ab6758..3ea1888cea 100644 --- a/board/lwmon5/MAINTAINERS +++ b/board/lwmon5/MAINTAINERS @@ -3,5 +3,4 @@ M: Stefan Roese S: Maintained F: board/lwmon5/ F: include/configs/lwmon5.h -F: configs/lcd4_lwmon5_defconfig F: configs/lwmon5_defconfig diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index e9aa0b77de..8ad6712841 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -187,11 +187,9 @@ int misc_init_r(void) u32 pbcr; int size_val = 0; u32 reg; -#ifndef CONFIG_LCD4_LWMON5 unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1, sdr0_srst; -#endif /* * FLASH stuff... @@ -222,7 +220,6 @@ int misc_init_r(void) CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1, &flash_info[cfi_flash_num_flash_banks - 1]); -#ifndef CONFIG_LCD4_LWMON5 /* * USB suff... */ @@ -296,7 +293,6 @@ int misc_init_r(void) /* 7. Reassert internal PHY reset: */ mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY); udelay(1000); -#endif /* * Clear resets @@ -304,9 +300,7 @@ int misc_init_r(void) mtsdr(SDR0_SRST1, 0x00000000); mtsdr(SDR0_SRST0, 0x00000000); -#ifndef CONFIG_LCD4_LWMON5 printf("USB: Host(int phy) Device(ext phy)\n"); -#endif /* * Clear PLB4A0_ACR[WRP] @@ -316,12 +310,10 @@ int misc_init_r(void) reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; mtdcr(PLB4A0_ACR, reg); -#ifndef CONFIG_LCD4_LWMON5 /* * Init matrix keyboard */ misc_init_r_kbd(); -#endif return 0; } diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index 5dfbb0bc25..bcb344940b 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -147,7 +147,6 @@ static void program_ecc(u32 start_address, ************************************************************************/ phys_size_t initdram (int board_type) { -#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_LCD4_LWMON5) /* CL=4 */ mtsdram(DDR0_02, 0x00000000); @@ -241,7 +240,6 @@ phys_size_t initdram (int board_type) * exceptions are enabled. */ set_mcsr(get_mcsr()); -#endif /* CONFIG_SPL_BUILD */ return (CONFIG_SYS_MBYTES_SDRAM << 20); } diff --git a/configs/lcd4_lwmon5_defconfig b/configs/lcd4_lwmon5_defconfig deleted file mode 100644 index b911dbd67d..0000000000 --- a/configs/lcd4_lwmon5_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_LWMON5=y -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="LCD4_LWMON5" -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 2a50bfea16..26136a52ce 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -25,13 +25,8 @@ #define CONFIG_SYS_GENERIC_BOARD -#ifdef CONFIG_LCD4_LWMON5 -#define CONFIG_SYS_TEXT_BASE 0x01000000 /* SPL U-Boot TEXT_BASE */ -#define CONFIG_HOSTNAME lcd4_lwmon5 -#else #define CONFIG_SYS_TEXT_BASE 0xFFF80000 #define CONFIG_HOSTNAME lwmon5 -#endif #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ @@ -67,11 +62,9 @@ #define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE1 + 0x10000000) #define CONFIG_SYS_PCI_MEMBASE3 (CONFIG_SYS_PCI_MEMBASE2 + 0x10000000) -#ifndef CONFIG_LCD4_LWMON5 #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 -#endif /* * Initial RAM & stack pointer @@ -81,20 +74,13 @@ * content during reset (GPT0_COMP6). This way we reserve the OCM (16k) * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.) */ -#ifndef CONFIG_LCD4_LWMON5 #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) -#endif + /* unused GPT0 COMP reg */ #define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) #define CONFIG_SYS_OCM_SIZE (16 << 10) @@ -168,11 +154,8 @@ #define CONFIG_SYS_MBYTES_SDRAM 256 #define CONFIG_SYS_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ -#ifndef CONFIG_LCD4_LWMON5 #define CONFIG_DDR_ECC /* enable ECC */ -#endif -#ifndef CONFIG_LCD4_LWMON5 /* POST support */ #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ CONFIG_SYS_POST_CPU | \ @@ -281,7 +264,6 @@ #define CONFIG_ALT_LH_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1) #define CONFIG_ALT_LB_ADDR (CONFIG_SYS_OCM_BASE) #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ -#endif /* * I2C @@ -401,7 +383,6 @@ #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN -#ifndef CONFIG_LCD4_LWMON5 /* * USB/EHCI */ @@ -417,7 +398,6 @@ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION -#endif /* * BOOTP options @@ -448,11 +428,9 @@ #define CONFIG_CMD_BMP #endif -#ifndef CONFIG_LCD4_LWMON5 #ifdef CONFIG_440EPX #define CONFIG_CMD_USB #endif -#endif /* * Miscellaneous configurable options @@ -485,13 +463,11 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ -#ifndef CONFIG_LCD4_LWMON5 #ifndef DEBUG #define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ #endif #define CONFIG_WD_PERIOD 40000 /* in usec */ #define CONFIG_WD_MAX_RATE 66600 /* in ticks */ -#endif /* * For booting Linux, the board info and command line data @@ -572,12 +548,7 @@ #define CONFIG_SYS_GPIO_SYSMON_STATUS 62 #define CONFIG_SYS_GPIO_WATCHDOG 63 -/* On LCD4, GPIO49 has to be configured to 0 instead of 1 */ -#ifdef CONFIG_LCD4_LWMON5 -#define GPIO49_VAL 0 -#else #define GPIO49_VAL 1 -#endif /* * PPC440 GPIO Configuration @@ -659,36 +630,4 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif -/* - * SPL related defines - */ -#ifdef CONFIG_LCD4_LWMON5 -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NOR_SUPPORT -#define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */ -#define CONFIG_SYS_SPL_MAX_LEN (64 << 10) -#define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */ -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ -#define CONFIG_SPL_SERIAL_SUPPORT - -/* Place BSS for SPL near end of SDRAM */ -#define CONFIG_SPL_BSS_START_ADDR ((256 - 1) << 20) -#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) - -#define CONFIG_SPL_OS_BOOT -/* Place patched DT blob (fdt) at this address */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 - -#define CONFIG_SPL_TARGET "u-boot-img-spl-at-end.bin" - -/* Settings for real U-Boot to be loaded from NOR flash */ -#define CONFIG_SYS_UBOOT_BASE (-CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_UBOOT_START 0x01002100 - -#define CONFIG_SYS_OS_BASE 0xf8000000 -#define CONFIG_SYS_FDT_BASE 0xf87c0000 -#endif - #endif /* __CONFIG_H */