From: Prabhakar Kushwaha Date: Fri, 3 Jun 2016 13:11:31 +0000 (+0530) Subject: armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC X-Git-Tag: v2016.07-rc1~26^2~5 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b7f2bbfff6dcc2d5989bb1d20500c431f7927daf;p=u-boot armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. This patch add support of LS1012A SoC along with - Update platform & DDR clock read logic as per SVR - Define MMDC controller register set. - Update LUT base address for PCIe - Avoid L3 platform cache compilation - Update USB address, errata - SerDes table - Added CSU IDs for SDHC2, SAI-1 to SAI-4 Signed-off-by: Calvin Johnson Signed-off-by: Makarand Pawagi Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index 5f86ef90d2..eb2cbc3f7e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -28,3 +28,7 @@ endif ifneq ($(CONFIG_LS1043A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o endif + +ifneq ($(CONFIG_LS1012A),) +obj-$(CONFIG_SYS_HAS_SERDES) += ls1012a_serdes.o +endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index a4130cee50..8eee016f11 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -2,6 +2,7 @@ SoC overview 1. LS1043A 2. LS2080A + 3. LS1012A LS1043A --------- @@ -84,3 +85,45 @@ The LS2080A SoC includes the following function and features: - QorIQ platform's trust architecture 3.0 - Service processor (SP) provides pre-boot initialization and secure-boot capabilities + +LS1012A +-------- +The LS1012A features an advanced 64-bit ARM v8 Cortex- +A53 processor, with 32 KB of parity protected L1-I cache, +32 KB of ECC protected L1-D cache, as well as 256 KB of +ECC protected L2 cache. + +The LS1012A SoC includes the following function and features: + - One 64-bit ARM v8 Cortex-A53 core with the following capabilities: + - ARM v8 cryptography extensions + - One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports + 16-/8-bit operation (no ECC support) + - ARM core-link CCI-400 cache coherent interconnect + - Packet Forwarding Engine (PFE) + - Cryptography acceleration (SEC) + - Ethernet interfaces supported by PFE: + - One Configurable x3 SerDes: + Two Serdes PLLs supported for usage by any SerDes data lane + Support for up to 6 GBaud operation + - High-speed peripheral interfaces: + - One PCI Express Gen2 controller, supporting x1 operation + - One serial ATA (SATA Gen 3.0) controller + - One USB 3.0/2.0 controller with integrated PHY + - One USB 2.0 controller with ULPI interface. . + - Additional peripheral interfaces: + - One quad serial peripheral interface (QuadSPI) controller + - One serial peripheral interface (SPI) controller + - Two enhanced secure digital host controllers + - Two I2C controllers + - One 16550 compliant DUART (two UART interfaces) + - Two general purpose IOs (GPIO) + - Two FlexTimers + - Five synchronous audio interfaces (SAI) + - Pre-boot loader (PBL) provides pre-boot initialization and RCW loading + - Single-source clocking solution enabling generation of core, platform, + DDR, SerDes, and USB clocks from a single external crystal and internal + crystaloscillator + - Thermal monitor unit (TMU) with +/- 3C accuracy + - Two WatchDog timers + - ARM generic timer + - QorIQ platform's trust architecture 2.1 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c index 4fc3186227..3a77b21d0a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c @@ -59,12 +59,18 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_ddrbus = sysclk; #endif +#ifdef CONFIG_LS1012A + sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >> + FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) & + FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK; +#else sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >> FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) & FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK; sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >> FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK; +#endif for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) { ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0xff; @@ -83,6 +89,11 @@ void get_sys_info(struct sys_info *sys_info) freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } +#ifdef CONFIG_LS1012A + sys_info->freq_systembus = sys_info->freq_ddrbus / 2; + sys_info->freq_ddrbus *= 2; +#endif + #define HWA_CGA_M1_CLK_SEL 0xe0000000 #define HWA_CGA_M1_CLK_SHIFT 29 #ifdef CONFIG_SYS_DPAA_FMAN diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index d743ffe6b5..5af6b73bc9 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -183,6 +183,7 @@ ENTRY(lowlevel_init) ret ENDPROC(lowlevel_init) +#ifdef CONFIG_FSL_LSCH3 hnf_pstate_poll: /* x0 has the desired status, return 0 for success, 1 for timeout * clobber x1, x2, x3, x4, x6, x7 @@ -260,6 +261,7 @@ ENTRY(__asm_flush_l3_cache) mov lr, x29 ret ENDPROC(__asm_flush_l3_cache) +#endif #ifdef CONFIG_MP /* Keep literals not used by the secondary boot code outside it */ diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c new file mode 100644 index 0000000000..ff0903cebc --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1012a_serdes.c @@ -0,0 +1,74 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + {0x2208, {SGMII_2500_FM1_DTSEC1, SGMII_2500_FM1_DTSEC2, NONE, SATA1} }, + {0x0008, {NONE, NONE, NONE, SATA1} }, + {0x3508, {SGMII_FM1_DTSEC1, PCIE1, NONE, SATA1} }, + {0x3305, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, NONE, PCIE1} }, + {0x2205, {SGMII_2500_FM1_DTSEC1, SGMII_2500_FM1_DTSEC2, NONE, PCIE1} }, + {0x2305, {SGMII_2500_FM1_DTSEC1, SGMII_FM1_DTSEC2, NONE, PCIE1} }, + {0x9508, {TX_CLK, PCIE1, NONE, SATA1} }, + {0x3905, {SGMII_FM1_DTSEC1, TX_CLK, NONE, PCIE1} }, + {0x9305, {TX_CLK, SGMII_FM1_DTSEC2, NONE, PCIE1} }, + {} +}; + +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 0ae61d6d3a..dd633f3690 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -12,8 +12,10 @@ #include #include #include +#ifdef CONFIG_SYS_FSL_DDR #include #include +#endif #ifdef CONFIG_CHAIN_OF_TRUST #include #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index fbdaa52c32..44fe0c0095 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -14,8 +14,11 @@ #else #define CONFIG_SYS_FSL_DDRC_ARM_GEN3 /* Enable Freescale ARM DDR3 driver */ #endif + +#ifndef CONFIG_LS1012A #define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */ #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 +#endif /* * Reserve secure memory @@ -200,6 +203,32 @@ #define CONFIG_SYS_FSL_ERRATUM_A009942 #define CONFIG_SYS_FSL_ERRATUM_A009660 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 +#elif defined(CONFIG_LS1012A) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0x01000000 +#define CONFIG_SYS_FSL_SEC_COMPAT 5 +#undef CONFIG_SYS_FSL_DDRC_ARM_GEN3 + +#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */ +#define CONFIG_SYS_FSL_OCRAM_SIZE 0x200000 /* 2 MiB */ + +#define GICD_BASE 0x01401000 +#define GICC_BASE 0x01402000 + +#define CONFIG_SYS_FSL_CCSR_GUR_BE +#define CONFIG_SYS_FSL_CCSR_SCFG_BE +#define CONFIG_SYS_FSL_ESDHC_BE +#define CONFIG_SYS_FSL_WDOG_BE +#define CONFIG_SYS_FSL_DSPI_BE +#define CONFIG_SYS_FSL_QSPI_BE +#define CONFIG_SYS_FSL_PEX_LUT_BE + +#define SRDS_MAX_LANES 4 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" +#define CONFIG_SYS_FSL_SEC_BE #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 702b9faabd..1cebe2fbb0 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -14,6 +14,7 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(LS1043, LS1043, 4), CPU_TYPE_ENTRY(LS1023, LS1023, 2), CPU_TYPE_ENTRY(LS2040, LS2040, 4), + CPU_TYPE_ENTRY(LS1012, LS1012, 1), }; #ifndef CONFIG_SYS_DCACHE_OFF diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index c4fb7c9a47..487cba8080 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -134,6 +134,7 @@ enum srds_prtcl { SGMII_2500_FM2_DTSEC6, SGMII_2500_FM2_DTSEC9, SGMII_2500_FM2_DTSEC10, + TX_CLK, SERDES_PRCTL_COUNT }; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 57b99d4084..e98e055d9f 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -60,7 +60,11 @@ #define CONFIG_SYS_PCIE2_PHYS_ADDR 0x4800000000ULL #define CONFIG_SYS_PCIE3_PHYS_ADDR 0x5000000000ULL /* LUT registers */ +#ifdef CONFIG_LS1012A +#define PCIE_LUT_BASE 0xC0000 +#else #define PCIE_LUT_BASE 0x10000 +#endif #define PCIE_LUT_LCTRL0 0x7F8 #define PCIE_LUT_DBG 0x7FC diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h index a3ccdb03c7..db76066c80 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h @@ -69,7 +69,12 @@ enum csu_cslx_ind { CSU_CSLX_IIC4 = 77, CSU_CSLX_WDT4, CSU_CSLX_WDT3, + CSU_CSLX_ESDHC2 = 80, CSU_CSLX_WDT5 = 81, + CSU_CSLX_SAI2, + CSU_CSLX_SAI1, + CSU_CSLX_SAI4, + CSU_CSLX_SAI3, CSU_CSLX_FTM2 = 86, CSU_CSLX_FTM1, CSU_CSLX_FTM4, @@ -143,7 +148,12 @@ static struct csu_ns_dev ns_dev[] = { {CSU_CSLX_IIC4, CSU_ALL_RW}, {CSU_CSLX_WDT4, CSU_ALL_RW}, {CSU_CSLX_WDT3, CSU_ALL_RW}, + {CSU_CSLX_ESDHC2, CSU_ALL_RW}, {CSU_CSLX_WDT5, CSU_ALL_RW}, + {CSU_CSLX_SAI2, CSU_ALL_RW}, + {CSU_CSLX_SAI1, CSU_ALL_RW}, + {CSU_CSLX_SAI4, CSU_ALL_RW}, + {CSU_CSLX_SAI3, CSU_ALL_RW}, {CSU_CSLX_FTM2, CSU_ALL_RW}, {CSU_CSLX_FTM1, CSU_ALL_RW}, {CSU_CSLX_FTM4, CSU_ALL_RW}, diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 831d81764e..02ecc6257e 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -41,6 +41,7 @@ struct cpu_type { { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)} #define SVR_WO_E 0xFFFFFE +#define SVR_LS1012 0x870400 #define SVR_LS1043 0x879200 #define SVR_LS1023 0x879208 #define SVR_LS2045 0x870120 diff --git a/include/fsl_mmdc.h b/include/fsl_mmdc.h new file mode 100644 index 0000000000..281a819863 --- /dev/null +++ b/include/fsl_mmdc.h @@ -0,0 +1,160 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef FSL_MMDC_H +#define FSL_MMDC_H + +#define CONFIG_SYS_MMDC_CORE_ODT_TIMING 0x12554000 +#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_0 0xbabf7954 +#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_1 0xff328f64 +#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_2 0x01ff00db + +#define CONFIG_SYS_MMDC_CORE_MISC 0x00000680 +#define CONFIG_SYS_MMDC_PHY_MEASURE_UNIT 0x00000800 +#define CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY 0x00002000 +#define CONFIG_SYS_MMDC_PHY_ODT_CTRL 0x0000022a + +#define CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY 0x00bf1023 + +#define CONFIG_SYS_MMDC_CORE_ADDR_PARTITION 0x0000007f + +#define CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL 0xa1390003 + +#define FORCE_ZQ_AUTO_CALIBRATION (0x1 << 16) + +/* PHY Write Leveling Configuration and Error Status (MPWLGCR) */ +#define WR_LVL_HW_EN 0x00000001 + +/* PHY Pre-defined Compare and CA delay-line Configuration (MPPDCMPR2) */ +#define MPR_COMPARE_EN 0x00000001 + +#define CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG 0x40404040 + +/* MMDC PHY Read DQS gating control register 0 (MPDGCTRL0) */ +#define AUTO_RD_DQS_GATING_CALIBRATION_EN 0x10000000 + +/* MMDC PHY Read Delay HW Calibration Control Register (MPRDDLHWCTL) */ +#define AUTO_RD_CALIBRATION_EN 0x00000010 + +#define CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL 0x00030035 + +#define CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT 0x00001067 + +#define CONFIG_SYS_MMDC_CORE_REFRESH_CTL 0x103e8000 + +#define START_REFRESH 0x00000001 + +/* MMDC Core Special Command Register (MDSCR) */ +#define CMD_ADDR_MSB_MR_OP(x) (x << 24) + +#define CMD_ADDR_LSB_MR_ADDR(x) (x << 16) + +#define DISABLE_CFG_REQ 0x0 +#define CONFIGURATION_REQ (0x1 << 15) +#define WL_EN (0x1 << 9) + +#define CMD_NORMAL (0x0 << 4) +#define CMD_PRECHARGE (0x1 << 4) +#define CMD_AUTO_REFRESH (0x2 << 4) +#define CMD_LOAD_MODE_REG (0x3 << 4) +#define CMD_ZQ_CALIBRATION (0x4 << 4) +#define CMD_PRECHARGE_BANK_OPEN (0x5 << 4) +#define CMD_MRR (0x6 << 4) + +#define CMD_BANK_ADDR_0 0x0 +#define CMD_BANK_ADDR_1 0x1 +#define CMD_BANK_ADDR_2 0x2 +#define CMD_BANK_ADDR_3 0x3 +#define CMD_BANK_ADDR_4 0x4 +#define CMD_BANK_ADDR_5 0x5 +#define CMD_BANK_ADDR_6 0x6 +#define CMD_BANK_ADDR_7 0x7 + +/* MMDC Registers */ +struct mmdc_p_regs { + u32 mdctl; + u32 mdpdc; + u32 mdotc; + u32 mdcfg0; + u32 mdcfg1; + u32 mdcfg2; + u32 mdmisc; + u32 mdscr; + u32 mdref; + u32 res1[2]; + u32 mdrwd; + u32 mdor; + u32 mdmrr; + u32 mdcfg3lp; + u32 mdmr4; + u32 mdasp; + u32 res2[239]; + u32 maarcr; + u32 mapsr; + u32 maexidr0; + u32 maexidr1; + u32 madpcr0; + u32 madpcr1; + u32 madpsr0; + u32 madpsr1; + u32 madpsr2; + u32 madpsr3; + u32 madpsr4; + u32 madpsr5; + u32 masbs0; + u32 masbs1; + u32 res3[2]; + u32 magenp; + u32 res4[239]; + u32 mpzqhwctrl; + u32 mpzqswctrl; + u32 mpwlgcr; + u32 mpwldectrl0; + u32 mpwldectrl1; + u32 mpwldlst; + u32 mpodtctrl; + u32 mprddqby0dl; + u32 mprddqby1dl; + u32 mprddqby2dl; + u32 mprddqby3dl; + u32 res5[4]; + u32 mpdgctrl0; + u32 mpdgctrl1; + u32 mpdgdlst0; + u32 mprddlctl; + u32 mprddlst; + u32 mpwrdlctl; + u32 mpwrdlst; + u32 mpsdctrl; + u32 mpzqlp2ctl; + u32 mprddlhwctl; + u32 mpwrdlhwctl; + u32 mprddlhwst0; + u32 mprddlhwst1; + u32 mpwrdlhwst0; + u32 mpwrdlhwst1; + u32 mpwlhwerr; + u32 mpdghwst0; + u32 mpdghwst1; + u32 mpdghwst2; + u32 mpdghwst3; + u32 mppdcmpr1; + u32 mppdcmpr2; + u32 mpswdar0; + u32 mpswdrdr0; + u32 mpswdrdr1; + u32 mpswdrdr2; + u32 mpswdrdr3; + u32 mpswdrdr4; + u32 mpswdrdr5; + u32 mpswdrdr6; + u32 mpswdrdr7; + u32 mpmur0; + u32 mpwrcadl; + u32 mpdccr; +}; + +#endif /* FSL_MMDC_H */ diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h index c5e42e69fe..253eddf159 100644 --- a/include/linux/usb/xhci-fsl.h +++ b/include/linux/usb/xhci-fsl.h @@ -59,10 +59,14 @@ struct fsl_xhci { #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 -#elif defined(CONFIG_LS1043A) +#elif defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A) #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR +#elif defined(CONFIG_LS1012A) +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 +#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 #endif #define FSL_USB_XHCI_ADDR {CONFIG_SYS_FSL_XHCI_USB1_ADDR, \