From: Adam Ford Date: Wed, 20 Sep 2017 01:32:11 +0000 (-0500) Subject: ARM: omap3: am3517-evm: Add device tree and DM support X-Git-Tag: v2017.11-rc1~17 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b85781c2a82ff33a65a32b64599416d3c21eeba6;p=u-boot ARM: omap3: am3517-evm: Add device tree and DM support With the device tree ported from Linux 4.13, this enables Driver Model and Device Tree support for the am3517-evm Signed-off-by: Adam Ford Tested-by: Derald D. Woods --- diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 11f5f058b9..4dbf9a27da 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -22,6 +22,11 @@ choice config TARGET_AM3517_EVM bool "AM3517 EVM" + select DM + select DM_SERIAL + select DM_GPIO + select DM_I2C + select DM_MMC config TARGET_MT_VENTOUX bool "TeeJet Mt.Ventoux" diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index c18a5a3140..29f136a530 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -12,6 +12,8 @@ */ #include +#include +#include #include #include #include @@ -34,6 +36,22 @@ DECLARE_GLOBAL_DATA_PTR; #define AM3517_IP_SW_RESET 0x48002598 #define CPGMACSS_SW_RST (1 << 1) +#define PHY_GPIO 30 + +/* This is only needed until SPL gets OF support */ +#ifdef CONFIG_SPL_BUILD +static const struct ns16550_platdata am3517_serial = { + .base = OMAP34XX_UART3, + .reg_shift = 2, + .clock = V_NS16550_CLK, + .fcr = UART_FCR_DEFVAL, +}; + +U_BOOT_DEVICE(am3517_uart) = { + "ns16550_serial", + &am3517_serial +}; +#endif /* * Routine: board_init @@ -113,30 +131,35 @@ int misc_init_r(void) am3517_evm_musb_init(); - /* activate PHY reset */ - gpio_direction_output(30, 0); - gpio_set_value(30, 0); - - ctr = 0; - do { - udelay(1000); - ctr++; - } while (ctr < 300); - - /* deactivate PHY reset */ - gpio_set_value(30, 1); - - /* allow the PHY to stabilize and settle down */ - ctr = 0; - do { - udelay(1000); - ctr++; - } while (ctr < 300); - - /* ensure that the module is out of reset */ - reset = readl(AM3517_IP_SW_RESET); - reset &= (~CPGMACSS_SW_RST); - writel(reset,AM3517_IP_SW_RESET); + if (gpio_request(PHY_GPIO, "gpio_30") == 0) { + /* activate PHY reset */ + gpio_direction_output(PHY_GPIO, 0); + gpio_set_value(PHY_GPIO, 0); + + ctr = 0; + do { + udelay(1000); + ctr++; + } while (ctr < 300); + + /* deactivate PHY reset */ + gpio_set_value(PHY_GPIO, 1); + + /* allow the PHY to stabilize and settle down */ + ctr = 0; + do { + udelay(1000); + ctr++; + } while (ctr < 300); + + /* ensure that the module is out of reset */ + reset = readl(AM3517_IP_SW_RESET); + reset &= (~CPGMACSS_SW_RST); + writel(reset, AM3517_IP_SW_RESET); + + /* Free requested GPIO */ + gpio_free(PHY_GPIO); + } return 0; } diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 920c61c391..8ab018656d 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -4,11 +4,14 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TI_COMMON_CMD_OPTIONS=y # CONFIG_SPL_GPIO_SUPPORT is not set +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_AM3517_EVM=y CONFIG_EMIF4=y +CONFIG_DEFAULT_DEVICE_TREE="am3517-evm" CONFIG_BOOTDELAY=10 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_EXT_SUPPORT is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_HUSH_PARSER=y @@ -27,13 +30,12 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_TIME is not set CONFIG_CMD_UBI=y CONFIG_SPL_PARTITION_UUIDS=y +CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y -CONFIG_USB_STORAGE=y # CONFIG_FAT_WRITE is not set CONFIG_BCH=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 708a98f827..adb33a9e3e 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -21,6 +21,7 @@ * header. That is 0x800FFFC0--0x80100000 should not be used for any * other needs. */ + #define CONFIG_SYS_TEXT_BASE 0x80100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 @@ -33,16 +34,6 @@ /* Hardware drivers */ -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) - -/* select serial console configuration */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 on AM3517 EVM */ - - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -72,7 +63,6 @@ #endif /* CONFIG_USB_MUSB_AM35X */ /* I2C */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 @@ -250,8 +240,6 @@ #define CONFIG_SPL_FRAMEWORK #undef CONFIG_SPL_TEXT_BASE #define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) #undef CONFIG_SPL_BSS_START_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000