From: Peter Tyser Date: Sat, 18 Jul 2009 00:01:09 +0000 (-0500) Subject: xpedite1k: Add support for additional GPIO pins X-Git-Tag: v2009.08-rc1~17^2~13 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b88da157f9990cd2cb081e4faea4b9581b5d0e2f;p=u-boot xpedite1k: Add support for additional GPIO pins Enable GPIO pins for an I2C EEPROM write protect, a system reset pin, and a PMC #MONARCH pin. These pins are not currently used in U-Boot, but are used in OSes and may be used in U-Boot in the future. Signed-off-by: Peter Tyser Signed-off-by: Stefan Roese --- diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c index 8a3503dd4f..ed864bad6e 100644 --- a/board/xpedite1k/xpedite1k.c +++ b/board/xpedite1k/xpedite1k.c @@ -32,9 +32,18 @@ int board_early_init_f(void) { unsigned long sdrreg; - /* TBS: Setup the GPIO access for the user LEDs */ + /* + * Enable GPIO for pins 18 - 24 + * 18 = SEEPROM_WP + * 19 = #M_RST + * 20 = #MONARCH + * 21 = #LED_ALARM + * 22 = #LED_ACT + * 23 = #LED_STATUS1 + * 24 = #LED_STATUS2 + */ mfsdr(sdr_pfc0, sdrreg); - mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00); + mtsdr(sdr_pfc0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00); out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); LED0_OFF(); LED1_OFF();