From: Wu, Josh <Josh.wu@atmel.com>
Date: Sun, 9 Sep 2012 23:45:49 +0000 (+0000)
Subject: atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.
X-Git-Tag: v2012.10-rc3~15^2~67^2~3
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=b9c83c68151636656c15d069397a716932872bd7;p=u-boot

atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.

Before the patch, it looks like:
	|U-Boot 2012.07-00441-gd578d6f-dirty (Sep 10 2012 - 16:11:06)
	|
	|CPU: AT91SAM9G35
	|Crystal frequency:       12 MHz
	|CPU clock        :      400 MHz
	|Master clock     :  133.333 MHz
	|DRAM:  128 MiB
	|WARNING: Caches not enabled
>	|NAND:  Initialize PMECC params, cap: 2, sector: 512
>	|256 MiB
	|MMC:   mci: 0
	|In:    serial
	|Out:   serial
	|Err:   serial
	|Net:   macb0
	|Hit any key to stop autoboot:  0

After the patch:
	|U-Boot 2012.07-00441-gd578d6f-dirty (Sep 10 2012 - 16:18:11)
	|
	|CPU: AT91SAM9G35
	|Crystal frequency:       12 MHz
	|CPU clock        :      400 MHz
	|Master clock     :  133.333 MHz
	|DRAM:  128 MiB
	|WARNING: Caches not enabled
>	|NAND:  256 MiB
	|	... ...
	|Hit any key to stop autoboot:  0

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
---

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c6aa5db33c..994dd9f095 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -652,8 +652,9 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 	sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
 	host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET;
 
-	printk(KERN_INFO "Initialize PMECC params, cap: %d, sector: %d\n",
-		 cap, sector_size);
+	MTDDEBUG(MTD_DEBUG_LEVEL1,
+		"Initialize PMECC params, cap: %d, sector: %d\n",
+		cap, sector_size);
 
 	host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC;
 	host->pmerrloc = (struct pmecc_errloc_regs __iomem *)