From: Bin Meng Date: Fri, 21 Apr 2017 14:24:39 +0000 (-0700) Subject: x86: fsp: Save stack address to CMOS for next S3 boot X-Git-Tag: v2017.07-rc1~254^2~17 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ba65808e7d0699e053c9892983312a11d4e2a30a;p=u-boot x86: fsp: Save stack address to CMOS for next S3 boot At the end of pre-relocation phase, save the new stack address to CMOS and use it as the stack on next S3 boot for fsp_init() continuation function. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Tested-by: Stefan Roese --- diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index f686ad49c9..f86eaa9df2 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -278,6 +278,14 @@ int reserve_arch(void) high_table_reserve(); #endif +#if defined(CONFIG_HAVE_ACPI_RESUME) && defined(CONFIG_HAVE_FSP) + /* + * Save stack address to CMOS so that at next S3 boot, + * we can use it as the stack address for fsp_contiue() + */ + fsp_save_s3_stack(); +#endif + return 0; } #endif diff --git a/arch/x86/include/asm/cmos_layout.h b/arch/x86/include/asm/cmos_layout.h new file mode 100644 index 0000000000..0a0a51e72d --- /dev/null +++ b/arch/x86/include/asm/cmos_layout.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2017, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CMOS_LAYOUT_H +#define __CMOS_LAYOUT_H + +/* + * The RTC internal registers and RAM is organized as two banks of 128 bytes + * each, called the standard and extended banks. The first 14 bytes of the + * standard bank contain the RTC time and date information along with four + * registers, A - D, that are used for configuration of the RTC. The extended + * bank contains a full 128 bytes of battery backed SRAM. + * + * For simplicity in U-Boot we only support CMOS in the standard bank, and + * its base address starts from offset 0x10, which leaves us 112 bytes space. + */ +#define CMOS_BASE 0x10 + +/* + * The file records all offsets off CMOS_BASE that is currently used by + * U-Boot for various reasons. It is put in such a unified place in order + * to be consistent across platforms. + */ + +/* stack address for S3 boot in a FSP configuration, 4 bytes */ +#define CMOS_FSP_STACK_ADDR CMOS_BASE + +#endif /* __CMOS_LAYOUT_H */ diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index d2d603967e..d55455f2d0 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -54,6 +54,19 @@ u32 isa_map_rom(u32 bus_addr, int size); /* arch/x86/lib/... */ int video_bios_init(void); +/* arch/x86/lib/fsp/... */ + +/** + * fsp_save_s3_stack() - save stack address to CMOS for next S3 boot + * + * At the end of pre-relocation phase, save the new stack address + * to CMOS and use it as the stack on next S3 boot for fsp_init() + * continuation function. + * + * @return: 0 if OK, -ve on error + */ +int fsp_save_s3_stack(void); + void board_init_f_r_trampoline(ulong) __attribute__ ((noreturn)); void board_init_f_r(void) __attribute__ ((noreturn)); diff --git a/arch/x86/lib/fsp/fsp_common.c b/arch/x86/lib/fsp/fsp_common.c index f2d50acbf4..3397bb83ea 100644 --- a/arch/x86/lib/fsp/fsp_common.c +++ b/arch/x86/lib/fsp/fsp_common.c @@ -5,8 +5,12 @@ */ #include +#include #include +#include #include +#include +#include #include #include #include @@ -76,9 +80,36 @@ static __maybe_unused void *fsp_prepare_mrc_cache(void) return cache->data; } +#ifdef CONFIG_HAVE_ACPI_RESUME +int fsp_save_s3_stack(void) +{ + struct udevice *dev; + int ret; + + if (gd->arch.prev_sleep_state == ACPI_S3) + return 0; + + ret = uclass_get_device(UCLASS_RTC, 0, &dev); + if (ret) { + debug("Cannot find RTC: err=%d\n", ret); + return -ENODEV; + } + + /* Save the stack address to CMOS */ + ret = rtc_write32(dev, CMOS_FSP_STACK_ADDR, gd->start_addr_sp); + if (ret) { + debug("Save stack address to CMOS: err=%d\n", ret); + return -EIO; + } + + return 0; +} +#endif + int arch_fsp_init(void) { void *nvs; + int stack = CONFIG_FSP_TEMP_RAM_ADDR; int boot_mode = BOOT_FULL_CONFIG; #ifdef CONFIG_HAVE_ACPI_RESUME int prev_sleep_state = chipset_prev_sleep_state(); @@ -107,6 +138,11 @@ int arch_fsp_init(void) panic("Reboot System"); } + /* + * DM is not avaiable yet at this point, hence call + * CMOS access library which does not depend on DM. + */ + stack = cmos_read32(CMOS_FSP_STACK_ADDR); boot_mode = BOOT_ON_S3_RESUME; } #endif @@ -115,7 +151,7 @@ int arch_fsp_init(void) * Note the execution does not return to this function, * instead it jumps to fsp_continue(). */ - fsp_init(CONFIG_FSP_TEMP_RAM_ADDR, boot_mode, nvs); + fsp_init(stack, boot_mode, nvs); } else { /* * The second time we enter here, adjust the size of malloc()