From: oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Thu, 16 Oct 2008 12:52:32 +0000 (+0000)
Subject: adding concept of production script
X-Git-Tag: v0.1.0~239
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=bd50535b0b4f39cac230e776b28d2b4b0c79ddf2;p=openocd

adding concept of production script

git-svn-id: svn://svn.berlios.de/openocd/trunk@1071 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---

diff --git a/src/target/target/zy1000.cfg b/src/target/target/zy1000.cfg
index d54925a5..00c577de 100644
--- a/src/target/target/zy1000.cfg
+++ b/src/target/target/zy1000.cfg
@@ -22,32 +22,75 @@ arm7_9 dcc_downloads enable
 
 flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 [new_target_name] configure -event reset-init { 
+	# Set up chip selects & timings
+	mww 0xFFE00000 0x0100273D
+	mww 0xFFE00004 0x08002125
+	mww 0xFFEe0008 0x02002125
+	mww 0xFFE0000c 0x03002125
+	mww 0xFFE00010 0x40000000
+	mww 0xFFE00014 0x50000000
+	mww 0xFFE00018 0x60000000
+	mww 0xFFE0001c 0x70000000
+	mww 0xFFE00020 0x00000001
+	mww 0xFFE00024 0x00000000
+	
+	# remap  
+	mww 0xFFFFF124 0xFFFFFFFF  
+	mww 0xffff0010 0x100
+	mww 0xffff0034 0x100
+	
+	#disable 16x5x UART interrupts
+	mww 0x08020004 0
+}
 
-# Set up chip selects & timings
-mww 0xFFE00000 0x0100273D
-mww 0xFFE00004 0x08002125
-mww 0xFFEe0008 0x02002125
-mww 0xFFE0000c 0x03002125
-mww 0xFFE00010 0x40000000
-mww 0xFFE00014 0x50000000
-mww 0xFFE00018 0x60000000
-mww 0xFFE0001c 0x70000000
-mww 0xFFE00020 0x00000001
-mww 0xFFE00024 0x00000000
+# required for usable performance. Used for lots of
+# other things than flash programming.
+working_area 0 0x00030000 0x20000 nobackup
 
-# remap  
-mww 0xFFFFF124 0xFFFFFFFF  
-mww 0xffff0010 0x100
-mww 0xffff0034 0x100
+jtag_khz 16000
 
-#disable 16x5x UART interrupts
-mww 0x08020004 0
 
+proc production_info {} {
+	return "Serial number is official MAC number"
+}
 
+proc production_help {} {
+	return "Serial number is MAC number. Format XXXXXXXXXXXXXX"
 }
 
-# required for usable performance. Used for lots of
-# other things than flash programming.
-working_area 0 0x00000000 0x20000 nobackup
+# There is no return value from this procedure. If it is
+# successful it does not throw an exception
+#
+# Progress messages are output via puts 
+proc production {firmwarefile serialnumber} {
+	if {[string length $serialnumber]!=12} {
+		puts "Invalid serial number"
+		return
+	}
 
-jtag_khz 16000
+	puts "Power cycling target"
+	power off
+	sleep 3000
+	power on
+	sleep 1000
+	reset init
+	flash write_image erase $firmwarefile 0x1000000 bin
+	verify_image $firmwarefile 0x1000000 bin
+
+	# Big endian... weee!!!!
+	puts "Setting MAC number to $serialnumber"	
+	flash fillw [expr 0x1030000-0x8] "0x[string range $serialnumber 2 3][string range $serialnumber 0 1]0000" 1
+	flash fillw [expr 0x1030000-0x4] "0x[string range $serialnumber 10 11][string range $serialnumber 8 9][string range $serialnumber 6 7][string range $serialnumber 4 5]" 1
+	puts "Production successful"
+} 
+
+
+proc production_test {} {
+	power on
+	sleep 1000
+	target_request debugmsgs enable
+	reset run
+	sleep 20000
+	target_request debugmsgs disable
+	return "See IP address above..."
+}
\ No newline at end of file