From: Wu, Josh Date: Tue, 1 Jul 2014 11:30:13 +0000 (+0800) Subject: README: document CONFIG_ENV_IS_IN_SPI_FLASH X-Git-Tag: v2014.07~42 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=bd83b5921201a61eb74ed7faa04c3f237d5323a2;p=u-boot README: document CONFIG_ENV_IS_IN_SPI_FLASH The option can be used to save the environment in spi flash. Implementation code is already exist in command/env_sf.c. But the documentation is missing. This patch add the details for this option to the README file. Signed-off-by: Josh Wu Reviewed-by: Jagannadha Sutradharudu Teki --- diff --git a/README b/README index 0c98545a0d..2bc0d3560c 100644 --- a/README +++ b/README @@ -4069,6 +4069,43 @@ to save the current settings. environment area within the total memory of your DataFlash placed at the specified address. +- CONFIG_ENV_IS_IN_SPI_FLASH: + + Define this if you have a SPI Flash memory device which you + want to use for the environment. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the + environment area within the SPI Flash. CONFIG_ENV_OFFSET must be + aligned to an erase sector boundary. + + - CONFIG_ENV_SECT_SIZE: + + Define the SPI flash's sector size. + + - CONFIG_ENV_OFFSET_REDUND (optional): + + This setting describes a second storage area of CONFIG_ENV_SIZE + size used to hold a redundant copy of the environment data, so + that there is a valid backup copy in case there is a power failure + during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be + aligned to an erase sector boundary. + + - CONFIG_ENV_SPI_BUS (optional): + - CONFIG_ENV_SPI_CS (optional): + + Define the SPI bus and chip select. If not defined they will be 0. + + - CONFIG_ENV_SPI_MAX_HZ (optional): + + Define the SPI max work clock. If not defined then use 1MHz. + + - CONFIG_ENV_SPI_MODE (optional): + + Define the SPI work mode. If not defined then use SPI_MODE_3. + - CONFIG_ENV_IS_IN_REMOTE: Define this if you have a remote memory space which you