From: Simon Glass <sjg@chromium.org>
Date: Tue, 3 Mar 2015 15:02:59 +0000 (-0700)
Subject: dm: tegra: Enable driver model in SPL and adjust the GPIO driver
X-Git-Tag: v2015.04-rc4~122
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=bdfb34167f73afc7e04d52499fc14bc1cd33fec0;p=u-boot

dm: tegra: Enable driver model in SPL and adjust the GPIO driver

Use the full driver model GPIO and serial drivers in SPL now that these are
supported. Since device tree is not available they will use platform data.

Remove the special SPL GPIO function as it is no longer needed.

This is all in one commit to maintain bisectability.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 8615248377..fccfd79648 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -29,6 +29,9 @@ config USE_PRIVATE_LIBGCC
 config DM
 	default y
 
+config SPL_DM
+	default y
+
 config DM_SERIAL
 	default y
 
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 11472ebaf2..25480e481d 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -20,10 +20,8 @@
 void gpio_early_init_uart(void)
 {
 	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
-#ifndef CONFIG_SPL_BUILD
 	gpio_request(GPIO_PI3, NULL);
-#endif
-	tegra_spl_gpio_direction_output(GPIO_PI3, 0);
+	gpio_direction_output(GPIO_PI3, 0);
 }
 #endif
 
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index aa11f15423..fe9a3b2396 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -8,6 +8,10 @@
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_DM_GPIO)		+= gpio-uclass.o
 endif
+/* TODO(sjg@chromium.org): Only tegra supports driver model in SPL */
+ifdef CONFIG_TEGRA_GPIO
+obj-$(CONFIG_DM_GPIO)		+= gpio-uclass.o
+endif
 
 obj-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
 obj-$(CONFIG_INTEL_ICH6_GPIO)	+= intel_ich6_gpio.o
diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c
index 43928b8812..f870cdbddf 100644
--- a/drivers/gpio/tegra_gpio.c
+++ b/drivers/gpio/tegra_gpio.c
@@ -132,21 +132,6 @@ static void set_level(unsigned gpio, int high)
 	writel(u, &bank->gpio_out[GPIO_PORT(gpio)]);
 }
 
-/* set GPIO pin 'gpio' as an output, with polarity 'value' */
-int tegra_spl_gpio_direction_output(int gpio, int value)
-{
-	/* Configure as a GPIO */
-	set_config(gpio, 1);
-
-	/* Configure GPIO output value. */
-	set_level(gpio, value);
-
-	/* Configure GPIO direction as output. */
-	set_direction(gpio, 1);
-
-	return 0;
-}
-
 /*
  * Generic_GPIO primitives.
  */
@@ -338,12 +323,19 @@ static int gpio_tegra_bind(struct udevice *parent)
 	int bank_count;
 	int bank;
 	int ret;
-	int len;
 
 	/* If this is a child device, there is nothing to do here */
 	if (plat)
 		return 0;
 
+	/* TODO(sjg@chromium.org): Remove once SPL supports device tree */
+#ifdef CONFIG_SPL_BUILD
+	ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
+	bank_count = TEGRA_GPIO_BANKS;
+#else
+	{
+	int len;
+
 	/*
 	 * This driver does not make use of interrupts, other than to figure
 	 * out the number of GPIO banks
@@ -353,6 +345,8 @@ static int gpio_tegra_bind(struct udevice *parent)
 	bank_count = len / 3 / sizeof(u32);
 	ctlr = (struct gpio_ctlr *)fdtdec_get_addr(gd->fdt_blob,
 						   parent->of_offset, "reg");
+	}
+#endif
 	for (bank = 0; bank < bank_count; bank++) {
 		int port;
 
@@ -388,4 +382,5 @@ U_BOOT_DRIVER(gpio_tegra) = {
 	.probe = gpio_tegra_probe,
 	.priv_auto_alloc_size = sizeof(struct tegra_port_info),
 	.ops	= &gpio_tegra_ops,
+	.flags	= DM_FLAG_PRE_RELOC,
 };
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 005fc6aeb3..fa6ccc16ee 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -43,13 +43,7 @@
 /*
  * NS16550 Configuration
  */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-#else
 #define CONFIG_TEGRA_SERIAL
-#endif
 #define CONFIG_SYS_NS16550
 
 /*