From: Wolfgang Denk Date: Mon, 13 Aug 2007 19:57:53 +0000 (+0200) Subject: Minor coding style cleanup. Update CHANGELOG. X-Git-Tag: v1.3.0-rc1~19^2~27^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=be5d72d10d47609326226225181e301fb9a33b58;p=u-boot Minor coding style cleanup. Update CHANGELOG. Signed-off-by: Wolfgang Denk --- diff --git a/CHANGELOG b/CHANGELOG index 1228908a5a..57299b65f2 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,53 @@ +commit a08458303e7f9db67f296980036d3292c35cb45c +Author: Haavard Skinnemoen +Date: Fri Jun 29 18:38:51 2007 +0200 + + atmel_mci: Fix data timeout value + + Calculate the data timeout based on values from the CSD instead of + just using a hardcoded DTOR value. This is a backport of a similar fix + in BSP 2.0, with one additional fix: the DTOCYC value is rounded up + instead of down. + + Signed-off-by: Haavard Skinnemoen + +commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 +Author: Haavard Skinnemoen +Date: Mon Aug 13 17:22:31 2007 +0200 + + AVR32: Include instead of + + include/asm-avr32/div64.h was recently moved to include/div64.h, but + cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of + the patch was merged perhaps?) + + This patch updates cpu/at32ap/interrupts.c so that the avr32 port + compiles again. + + Signed-off-by: Haavard Skinnemoen + +commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 +Author: Haavard Skinnemoen +Date: Wed Jun 27 13:34:26 2007 +0200 + + atmel_mci: Use 512 byte blocksize if possible + + Instead of always using the largest blocksize the card supports, check + if it can support smaller block sizes and use 512 bytes if possible. + Most cards do support this, and other parts of u-boot seem to have + trouble with block sizes different from 512 bytes. + + Also enable underrun/overrun protection. + + Signed-off-by: Haavard Skinnemoen + Acked-by: Hans-Christian Egtvedt + +commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b +Author: Wolfgang Denk +Date: Sun Aug 12 21:34:50 2007 +0200 + + Update CHANGELOG + commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a Author: Wolfgang Denk Date: Sun Aug 12 21:34:34 2007 +0200 @@ -3928,6 +3978,30 @@ Date: Fri Jan 5 09:15:34 2007 +0100 Signed-off-by Dan Malek, +commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 +Author: Haavard Skinnemoen +Date: Wed May 2 13:31:53 2007 +0200 + + macb: Don't restart autonegotiation if we already have link + + Rework macb_phy_init so that it doesn't attempt to re-negotiate if the + link is already up. + + Signed-off-by: Haavard Skinnemoen + +commit 04fcb5d38bc90779cd9a710d60702075986f0e29 +Author: Haavard Skinnemoen +Date: Wed May 2 13:22:38 2007 +0200 + + macb: Introduce a few barriers when dealing with DMA descriptors + + There were a few theoretical possibilities that the compiler might + optimize away DMA descriptor reads and/or writes and thus cause + synchronization problems with the hardware. Insert barriers where + we depend on reads/writes actually hitting memory. + + Signed-off-by: Haavard Skinnemoen + commit ffa621a0d12a1ccd81c936c567f8917a213787a8 Author: Andy Fleming Date: Sat Feb 24 01:08:13 2007 -0600 diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 6804e33c27..b74ac08bce 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -122,7 +122,7 @@ long int initdram(int board_type) mem_conf_t *mem_conf; mem_conf = get_mem_config(board_type); - + /* configure SDRAM start/end for detection */ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ @@ -303,7 +303,7 @@ int checkboard(void) hw_id_t hw_id_tmp; char module_name_tmp[MODULE_NAME_MAXLEN] = ""; - /* + /* * We need I2C to access HW ID data from EEPROM, so we call i2c_init() * here despite the fact that it will be called again later on. We * also use a little trick to silence I2C-related output. @@ -321,7 +321,7 @@ int checkboard(void) else printf("Board: unrecognized cm5200 module (%s)\n", module_name_tmp); - + return 0; } diff --git a/board/cm5200/cm5200.h b/board/cm5200/cm5200.h index a6cbc88f47..b2ea5ce0d8 100644 --- a/board/cm5200/cm5200.h +++ b/board/cm5200/cm5200.h @@ -138,7 +138,7 @@ static char **hw_id_list[] = { cmu1_qa_hw_id, }; -/* indices to the above list - keep in sync */ +/* indices to the above list - keep in sync */ enum { CM1_QA, CM11_QA, diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index fd9b914ae3..513c365537 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -1,7 +1,7 @@ /* * (C) Copyright 2007 Markus Kappeler * - * Adapted for U-Boot 1.2 by Piotr Kruszynski + * Adapted for U-Boot 1.2 by Piotr Kruszynski * * See file CREDITS for list of people who contributed to this * project. diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci index c343dfdf90..494dd1f5d9 100644 --- a/doc/README.generic_usb_ohci +++ b/doc/README.generic_usb_ohci @@ -41,7 +41,7 @@ mpc5xxx. For these the config option CFG_OHCI_BE_CONTROLLER -needs to be defined. +needs to be defined. PCI Controllers @@ -55,6 +55,3 @@ PCI Controllers need to do byte swapping on register accesses, so they should to define: CFG_OHCI_SWAP_REG_ACCESS - - - diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c index aee8727039..cf05043c0a 100644 --- a/drivers/nand/nand_util.c +++ b/drivers/nand/nand_util.c @@ -209,7 +209,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) } if (!opts->quiet) { - unsigned long long n =(unsigned long long) + unsigned long long n =(unsigned long long) (erase.addr+meminfo->erasesize-opts->offset) * 100; int percent = (int)do_div(n, erase_length); @@ -476,8 +476,8 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts) imglen -= readlen; if (!opts->quiet) { - unsigned long long n = (unsigned long long) - (opts->length-imglen) * 100; + unsigned long long n = (unsigned long long) + (opts->length-imglen) * 100; int percent = (int)do_div(n, opts->length); /* output progress message only at whole percent * steps to reduce the number of messages printed @@ -651,8 +651,8 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts) } if (!opts->quiet) { - unsigned long long n = (unsigned long long) - (opts->length-imglen) * 100; + unsigned long long n = (unsigned long long) + (opts->length-imglen) * 100; int percent = (int)do_div(n ,opts->length); /* output progress message only at whole percent * steps to reduce the number of messages printed diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c index d6b745fadd..f0a37b20a7 100644 --- a/drivers/usb_ohci.c +++ b/drivers/usb_ohci.c @@ -132,8 +132,6 @@ int got_rhsc; /* device which was disconnected */ struct usb_device *devgone; - - /*-------------------------------------------------------------------------*/ /* AMD-756 (D2 rev) reports corrupt register contents in some cases. @@ -157,7 +155,6 @@ static inline u32 roothub_status (struct ohci *hc) static u32 roothub_portstatus (struct ohci *hc, int i) { return read_roothub (hc, portstatus [i], 0xffe0fce0); } - /* forward declaration */ static int hc_interrupt (void); static void @@ -412,8 +409,6 @@ static void ohci_dump (ohci_t *controller, int verbose) ep_print_int_eds (controller, "hcca"); dbg ("hcca frame #%04x", controller->hcca->frame_no); ohci_dump_roothub (controller, 1); -} - #endif /* DEBUG */ @@ -701,7 +696,6 @@ static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed, } } - /* unlink an ed from one of the HC chains. * just the link to the ed is unlinked. * the link from the ed still points to another operational ed or 0 @@ -759,7 +753,6 @@ static int ep_unlink (ohci_t *ohci, ed_t *edi) return 0; } - /*-------------------------------------------------------------------------*/ /* add/reinit an endpoint; this should be done once at the @@ -939,7 +932,6 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf * Done List handling functions *-------------------------------------------------------------------------*/ - /* calculate the transfer length and update the urb */ static void dl_transfer_length(td_t * td) @@ -951,7 +943,6 @@ static void dl_transfer_length(td_t * td) tdBE = m32_swap (td->hwBE); tdCBP = m32_swap (td->hwCBP); - if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL && ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { if (tdBE != 0) { @@ -1094,7 +1085,6 @@ static __u8 root_hub_dev_des[] = 0x01 /* __u8 bNumConfigurations; */ }; - /* Configuration descriptor */ static __u8 root_hub_config_des[] = { @@ -1172,7 +1162,6 @@ static unsigned char root_hub_str_index1[] = /* Hub class-specific descriptor is constructed dynamically */ - /*-------------------------------------------------------------------------*/ #define OK(x) len = (x); break diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 56c0ecb4d9..d554348021 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -31,7 +31,6 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ - /* * Supported commands */ @@ -60,7 +59,6 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */ - /* * Ethernet configuration */ @@ -71,7 +69,6 @@ #define CONFIG_MISC_INIT_R 1 #define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ - /* * POST support */ @@ -80,11 +77,9 @@ /* List of I2C addresses to be verified by POST */ #define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } - /* display image timestamps */ #define CONFIG_TIMESTAMP 1 - /* * Autobooting */ @@ -137,19 +132,16 @@ "" #define CONFIG_BOOTCOMMAND "run flash_flash" - /* * Low level configuration */ - /* * Clock configuration */ #define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ #define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ - /* * Memory map */ @@ -184,7 +176,7 @@ */ #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_BASE 0xfc000000 +#define CFG_FLASH_BASE 0xfc000000 /* we need these despite using CFI */ #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ @@ -215,7 +207,6 @@ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x00000001 - /* * SDRAM configuration * settings for k4s561632E-xx75, assuming XLB = 132 MHz @@ -225,8 +216,6 @@ #define SDRAM_CONFIG1 0xE2333900 #define SDRAM_CONFIG2 0x8EE70000 - - /* * MTD configuration */ @@ -238,7 +227,6 @@ "2m(kernel),27904k(rootfs)," \ "-(config)" - /* * I2C configuration */ @@ -249,13 +237,11 @@ #define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ #define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ - /* * RTC configuration */ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - /* * USB configuration */ @@ -284,7 +270,6 @@ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) - /* * Pin multiplexing configuration */ @@ -302,7 +287,6 @@ */ #define CFG_GPS_PORT_CONFIG 0x10559C44 - /* * Miscellaneous configurable options */ @@ -322,7 +306,6 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ @@ -334,7 +317,6 @@ #define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ - /* * Cache Configuration */ @@ -343,7 +325,6 @@ #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif - /* * Flat Device Tree support */ diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c index ffd9209b19..46d525db14 100644 --- a/libfdt/fdt_ro.c +++ b/libfdt/fdt_ro.c @@ -534,4 +534,3 @@ int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re) } #endif /* CONFIG_OF_LIBFDT */ -