From: Aneesh Bansal Date: Wed, 12 Mar 2014 16:30:18 +0000 (+0530) Subject: powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS X-Git-Tag: v2014.07-rc1~15^2~56 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=bea3cbb07fb4c47c2a0324a22bb83c020769f151;p=u-boot powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS In case of secure boot from NAND, the DDR is initialized by the BootROM using the config words (CF_WORDS) in the CF_HEADER and u-boot image is copied from NAND to DDR by the BootROM. So, CONFIG_SYS_RAMBOOT has been defined for Secure Boot from NAND Signed-off-by: Aneesh Bansal Reviewed-by: York Sun --- diff --git a/boards.cfg b/boards.cfg index 2e0bee79bc..4c9a1a4e83 100644 --- a/boards.cfg +++ b/boards.cfg @@ -765,6 +765,8 @@ Active powerpc mpc85xx - freescale bsc9132qds Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SDCARD_DDRCLK133_SECURE BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT Aneesh Bansal Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK100_SECURE BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT Aneesh Bansal Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK133_SECURE BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT Aneesh Bansal +Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_NAND_DDRCLK100_SECURE BSC9132QDS:BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT Aneesh Bansal +Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_NAND_DDRCLK133_SECURE BSC9132QDS:BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT Aneesh Bansal Active powerpc mpc85xx - freescale c29xpcie C29XPCIE C29XPCIE:C29XPCIE,36BIT Po Liu Active powerpc mpc85xx - freescale c29xpcie C29XPCIE_NAND C29XPCIE:C29XPCIE,36BIT,NAND Po Liu Active powerpc mpc85xx - freescale c29xpcie C29XPCIE_SPIFLASH C29XPCIE:C29XPCIE,36BIT,SPIFLASH Po Liu diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 772e123151..1b119f1f22 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -32,6 +32,13 @@ #define CONFIG_SYS_TEXT_BASE 0x11000000 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif +#ifdef CONFIG_NAND_SECBOOT +#define CONFIG_RAMBOOT_NAND +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#endif #ifdef CONFIG_NAND #define CONFIG_SPL @@ -551,7 +558,7 @@ combinations. this should be removed later #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 -#elif defined(CONFIG_NAND) +#elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)