From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Tue, 8 May 2012 12:51:09 +0000 (+0100)
Subject: stlink: fix stlink api2 single step
X-Git-Tag: v0.6.0-rc1~91
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c102e448c3e1f58b09d9375d421087c5155e5be6;p=openocd

stlink: fix stlink api2 single step

This makes the newer v2 api behave as per the v1 api, eg. single stepping
masks all interrupts.

A better long term solution is to use same behaviour as a cortex-m3
target, see CORTEX_M3_ISRMASK_AUTO.

Change-Id: Iaf9f9adf225cf274faaac938050bb996582aa98f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/621
Tested-by: jenkins
---

diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c
index b4944f56..708b24b4 100644
--- a/src/jtag/drivers/stlink_usb.c
+++ b/src/jtag/drivers/stlink_usb.c
@@ -872,8 +872,13 @@ static int stlink_usb_step(void *handle)
 
 	h = (struct stlink_usb_handle_s *)handle;
 
-	if (h->jtag_api == STLINK_JTAG_API_V2)
-		return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_DEBUGEN);
+	if (h->jtag_api == STLINK_JTAG_API_V2) {
+		/* TODO: this emulates the v1 api, it should really use a similar auto mask isr
+		 * that the cortex-m3 currently does. */
+		stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN);
+		stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_MASKINTS|C_DEBUGEN);
+		return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN);
+	}
 
 	stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);