From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 25 Feb 2014 09:25:38 +0000 (+0100)
Subject: net: zynq: Use predefined macros instead of hardcoded value
X-Git-Tag: v2014.07-rc1~7^2~1
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c1a9fa4ba67971f45ee106250340963cef7d020a;p=u-boot

net: zynq: Use predefined macros instead of hardcoded value

MII is used by this driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 101489c994..08056a4bac 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -338,7 +338,8 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 	phy_detection(dev);
 
 	/* interface - look at tsec */
-	phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0);
+	phydev = phy_connect(priv->bus, priv->phyaddr, dev,
+			     PHY_INTERFACE_MODE_MII);
 
 	phydev->supported = supported | ADVERTISED_Pause |
 			    ADVERTISED_Asym_Pause;