From: Tom Rini Date: Mon, 14 Aug 2017 14:40:01 +0000 (-0400) Subject: Merge branch 'master' of git://git.denx.de/u-boot-rockchip X-Git-Tag: v2017.09-rc2~5 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c1b62ba9ca0e41fdd548cb3bb9af3b3f90d4a393;hp=bc5d0384458466ed5b3608d326eec03cd4f13016;p=u-boot Merge branch 'master' of git://git.denx.de/u-boot-rockchip --- diff --git a/Kconfig b/Kconfig index 286d1c7afc..14740b49f1 100644 --- a/Kconfig +++ b/Kconfig @@ -96,7 +96,17 @@ config SYS_MALLOC_F_LEN initial serial device and any others that are needed. config SPL_SYS_MALLOC_F_LEN - hex "Size of malloc() pool in spl before relocation" + hex "Size of malloc() pool in SPL before relocation" + depends on SYS_MALLOC_F + default SYS_MALLOC_F_LEN + help + Before relocation, memory is very limited on many platforms. Still, + we can provide a small malloc() pool if needed. Driver model in + particular needs this to operate, so that it can allocate the + initial serial device and any others that are needed. + +config TPL_SYS_MALLOC_F_LEN + hex "Size of malloc() pool in TPL before relocation" depends on SYS_MALLOC_F default SYS_MALLOC_F_LEN help diff --git a/Makefile b/Makefile index 50a002e72f..e1b0b13456 100644 --- a/Makefile +++ b/Makefile @@ -1400,7 +1400,8 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE spl/u-boot-spl.bin: spl/u-boot-spl @: spl/u-boot-spl: tools prepare \ - $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) + $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \ + $(if $(CONFIG_OF_SEPARATE)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb) $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all spl/sunxi-spl.bin: spl/u-boot-spl diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 61d8d31ee2..39b001fd53 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -618,6 +618,11 @@ config ARCH_MX6 select SYS_FSL_SEC_LE select SYS_THUMB_BUILD if SPL +if ARCH_MX6 +config SPL_LDSCRIPT + default "arch/arm/mach-omap2/u-boot-spl.lds" +endif + config ARCH_MX5 bool "Freescale MX5" select CPU_V7 @@ -1233,3 +1238,10 @@ source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" endmenu + +config SPL_LDSCRIPT + default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 + default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 + default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 + + diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index c447085fe4..1249547436 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -8,7 +8,9 @@ extra-y := start.o obj-y += cpu.o +ifndef CONFIG_$(SPL_TPL_)TIMER obj-y += generic_timer.o +endif obj-y += cache_v8.o obj-y += exceptions.o obj-y += cache.o diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S index 7cba308ee7..ea845d1809 100644 --- a/arch/arm/cpu/armv8/cache.S +++ b/arch/arm/cpu/armv8/cache.S @@ -22,6 +22,7 @@ * x1: 0 clean & invalidate, 1 invalidate only * x2~x9: clobbered */ +.pushsection .text.__asm_dcache_level, "ax" ENTRY(__asm_dcache_level) lsl x12, x0, #1 msr csselr_el1, x12 /* select cache level */ @@ -58,6 +59,7 @@ loop_way: ret ENDPROC(__asm_dcache_level) +.popsection /* * void __asm_flush_dcache_all(int invalidate_only) @@ -66,6 +68,7 @@ ENDPROC(__asm_dcache_level) * * flush or invalidate all data cache by SET/WAY. */ +.pushsection .text.__asm_dcache_all, "ax" ENTRY(__asm_dcache_all) mov x1, x0 dsb sy @@ -102,16 +105,21 @@ skip: finished: ret ENDPROC(__asm_dcache_all) +.popsection +.pushsection .text.__asm_flush_dcache_all, "ax" ENTRY(__asm_flush_dcache_all) mov x0, #0 b __asm_dcache_all ENDPROC(__asm_flush_dcache_all) +.popsection +.pushsection .text.__asm_invalidate_dcache_all, "ax" ENTRY(__asm_invalidate_dcache_all) mov x0, #0x1 b __asm_dcache_all ENDPROC(__asm_invalidate_dcache_all) +.popsection /* * void __asm_flush_dcache_range(start, end) @@ -121,6 +129,7 @@ ENDPROC(__asm_invalidate_dcache_all) * x0: start address * x1: end address */ +.pushsection .text.__asm_flush_dcache_range, "ax" ENTRY(__asm_flush_dcache_range) mrs x3, ctr_el0 lsr x3, x3, #16 @@ -138,6 +147,7 @@ ENTRY(__asm_flush_dcache_range) dsb sy ret ENDPROC(__asm_flush_dcache_range) +.popsection /* * void __asm_invalidate_dcache_range(start, end) * @@ -146,6 +156,7 @@ ENDPROC(__asm_flush_dcache_range) * x0: start address * x1: end address */ +.pushsection .text.__asm_invalidate_dcache_range, "ax" ENTRY(__asm_invalidate_dcache_range) mrs x3, ctr_el0 ubfm x3, x3, #16, #19 @@ -162,41 +173,51 @@ ENTRY(__asm_invalidate_dcache_range) dsb sy ret ENDPROC(__asm_invalidate_dcache_range) +.popsection /* * void __asm_invalidate_icache_all(void) * * invalidate all tlb entries. */ +.pushsection .text.__asm_invalidate_icache_all, "ax" ENTRY(__asm_invalidate_icache_all) ic ialluis isb sy ret ENDPROC(__asm_invalidate_icache_all) +.popsection +.pushsection .text.__asm_invalidate_l3_dcache, "ax" ENTRY(__asm_invalidate_l3_dcache) mov x0, #0 /* return status as success */ ret ENDPROC(__asm_invalidate_l3_dcache) .weak __asm_invalidate_l3_dcache +.popsection +.pushsection .text.__asm_flush_l3_dcache, "ax" ENTRY(__asm_flush_l3_dcache) mov x0, #0 /* return status as success */ ret ENDPROC(__asm_flush_l3_dcache) .weak __asm_flush_l3_dcache +.popsection +.pushsection .text.__asm_invalidate_l3_icache, "ax" ENTRY(__asm_invalidate_l3_icache) mov x0, #0 /* return status as success */ ret ENDPROC(__asm_invalidate_l3_icache) .weak __asm_invalidate_l3_icache +.popsection /* * void __asm_switch_ttbr(ulong new_ttbr) * * Safely switches to a new page table. */ +.pushsection .text.__asm_switch_ttbr, "ax" ENTRY(__asm_switch_ttbr) /* x2 = SCTLR (alive throghout the function) */ switch_el x4, 3f, 2f, 1f @@ -244,3 +265,4 @@ ENTRY(__asm_switch_ttbr) ret x3 ENDPROC(__asm_switch_ttbr) +.popsection diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 1b98f5a955..cdeef26fe5 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -393,3 +393,6 @@ config SYS_MC_RSV_MEM_ALIGN help Reserved memory needs to be aligned for MC to use. Default value is 512MB. + +config SPL_LDSCRIPT + default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A diff --git a/arch/arm/cpu/armv8/tlb.S b/arch/arm/cpu/armv8/tlb.S index 945445bc37..6743111b6a 100644 --- a/arch/arm/cpu/armv8/tlb.S +++ b/arch/arm/cpu/armv8/tlb.S @@ -14,7 +14,8 @@ * void __asm_invalidate_tlb_all(void) * * invalidate all tlb entries. - */ +*/ +.pushsection .text.__asm_invalidate_tlb_all, "ax" ENTRY(__asm_invalidate_tlb_all) switch_el x9, 3f, 2f, 1f 3: tlbi alle3 @@ -31,3 +32,4 @@ ENTRY(__asm_invalidate_tlb_all) 0: ret ENDPROC(__asm_invalidate_tlb_all) +.popsection diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S index ca07465376..7aa6935318 100644 --- a/arch/arm/cpu/armv8/transition.S +++ b/arch/arm/cpu/armv8/transition.S @@ -10,6 +10,7 @@ #include #include +.pushsection .text.armv8_switch_to_el2, "ax" ENTRY(armv8_switch_to_el2) switch_el x6, 1f, 0f, 0f 0: @@ -30,7 +31,9 @@ ENTRY(armv8_switch_to_el2) br x4 1: armv8_switch_to_el2_m x4, x5, x6 ENDPROC(armv8_switch_to_el2) +.popsection +.pushsection .text.armv8_switch_to_el1, "ax" ENTRY(armv8_switch_to_el1) switch_el x6, 0f, 1f, 0f 0: @@ -40,7 +43,10 @@ ENTRY(armv8_switch_to_el1) br x4 1: armv8_switch_to_el1_m x4, x5, x6 ENDPROC(armv8_switch_to_el1) +.popsection +.pushsection .text.armv8_el2_to_aarch32, "ax" WEAK(armv8_el2_to_aarch32) ret ENDPROC(armv8_el2_to_aarch32) +.popsection diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c2dc240edf..2cbdb17ca5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ rk3328-evb.dtb \ + rk3368-lion.dtb \ rk3368-sheep.dtb \ rk3368-geekbox.dtb \ rk3368-px5-evb.dtb \ diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts index 37137c2e52..64f1c2d7da 100644 --- a/arch/arm/dts/rk3229-evb.dts +++ b/arch/arm/dts/rk3229-evb.dts @@ -72,6 +72,17 @@ status = "okay"; }; +&sdmmc { + status = "okay"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + supports-sd; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/dts/rk322x.dtsi b/arch/arm/dts/rk322x.dtsi index 4f2a1f6a15..22324f97b3 100644 --- a/arch/arm/dts/rk322x.dtsi +++ b/arch/arm/dts/rk322x.dtsi @@ -21,6 +21,8 @@ serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; + mmc0 = &emmc; + mmc1 = &sdmmc; }; cpus { @@ -383,12 +385,38 @@ status = "disabled"; }; + sdmmc: dwmmc@30000000 { + compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30000000 0x4000>; + max-frequency = <150000000>; + interrupts = ; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "disabled"; + }; + + sdio: dwmmc@30010000 { + compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30010000 0x4000>; + interrupts = ; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; + status = "disabled"; + }; + emmc: dwmmc@30020000 { compatible = "rockchip,rk3288-dw-mshc"; reg = <0x30020000 0x4000>; + max-frequency = <150000000>; interrupts = ; - clock-frequency = <37500000>; - max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; @@ -520,6 +548,40 @@ drive-strength = <12>; }; + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <1 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <1 20 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <1 21 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <3 3 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <3 4 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <3 5 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; diff --git a/arch/arm/dts/rk3368-geekbox-u-boot.dtsi b/arch/arm/dts/rk3368-geekbox-u-boot.dtsi new file mode 100644 index 0000000000..764b3e4cb4 --- /dev/null +++ b/arch/arm/dts/rk3368-geekbox-u-boot.dtsi @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3368-lion-u-boot.dtsi b/arch/arm/dts/rk3368-lion-u-boot.dtsi new file mode 100644 index 0000000000..6052e8a8d3 --- /dev/null +++ b/arch/arm/dts/rk3368-lion-u-boot.dtsi @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +/ { + config { + u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ + u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + u-boot,spl-boot-order = &emmc, &sdmmc; + }; + +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + + /* + * Validation of throughput using SPEC2000 shows the following + * relative performance for the different memory schedules: + * - CBDR: 30.1 + * - CBRD: 29.8 + * - CRBD: 29.9 + * Note that the best performance for any given application workload + * may vary from the default configured here (e.g. 164.gzip is fastest + * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD). + * + * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for + * details on the 'rockchip,memory-schedule' property and how it + * affects the physical-address to device-address mapping. + */ + rockchip,memory-schedule = ; + rockchip,ddr-frequency = <800000000>; + rockchip,ddr-speed-bin = ; + + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&sgrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart0 { + u-boot,dm-pre-reloc; +}; + +&emmc { + u-boot,dm-pre-reloc; +}; + +&sdmmc { + u-boot,dm-pre-reloc; +}; + +&spi1 { + u-boot,dm-pre-reloc; + + spiflash: w25q32dw@0 { + u-boot,dm-pre-reloc; + }; +}; + +&timer0 { + u-boot,dm-pre-reloc; + clock-frequency = <24000000>; +}; + + diff --git a/arch/arm/dts/rk3368-lion.dts b/arch/arm/dts/rk3368-lion.dts new file mode 100644 index 0000000000..850db500e4 --- /dev/null +++ b/arch/arm/dts/rk3368-lion.dts @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +/dts-v1/; +#include "rk3368.dtsi" +#include "rk3368-lion-u-boot.dtsi" +#include + +/ { + model = "Theobroma Systems RK3368-uQ7 SoM"; + compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368"; + + aliases { + mmc0 = &emmc; + mmc1 = &sdmmc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ext_gmac: gmac-clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&emmc { + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; + clock-frequency = <150000000>; + disable-wp; + keep-power-in-suspend; + non-removable; + num-slots = <1>; + vmmc-supply = <&vcc33_io>; + vqmmc-supply = <&vcc18_io>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; +}; + +&sdmmc { + status = "okay"; +}; + +&gmac { + status = "okay"; + phy-supply = <&vcc33_io>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <2 10000 50000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x10>; + rx_delay = <0x10>; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_sys>; + clock-output-names = "xin32k", "rk808-clkout2"; + #clock-cells = <1>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu"; + }; + + vdd_log: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_log"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc33_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_io"; + }; + + vcc33_video: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_video"; + }; + + vdd10_pll: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_pll"; + }; + + vcc18_io: LDO_REG4 { + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_io"; + }; + + vdd10_video: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_video"; + }; + + vcc18_video: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_video"; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + spiflash: w25q32dw@0 { + compatible = "spi-flash"; + reg = <0>; + spi-max-frequency = <49500000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi b/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi new file mode 100644 index 0000000000..3a5e30ea55 --- /dev/null +++ b/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3368-sheep-u-boot.dtsi b/arch/arm/dts/rk3368-sheep-u-boot.dtsi new file mode 100644 index 0000000000..764b3e4cb4 --- /dev/null +++ b/arch/arm/dts/rk3368-sheep-u-boot.dtsi @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi index 9daf765430..b4f4f6139d 100644 --- a/arch/arm/dts/rk3368.dtsi +++ b/arch/arm/dts/rk3368.dtsi @@ -46,6 +46,7 @@ #include #include #include +#include / { compatible = "rockchip,rk3368"; @@ -227,6 +228,21 @@ #clock-cells = <0>; }; + dmc: dmc@ff610000 { + compatible = "rockchip,rk3368-dmc", "syscon"; + rockchip,cru = <&cru>; + rockchip,grf = <&grf>; + rockchip,msch = <&service_msch>; + reg = <0 0xff610000 0 0x400 + 0 0xff620000 0 0x400>; + }; + + service_msch: syscon@ffac0000 { + compatible = "rockchip,rk3368-msch", "syscon"; + reg = <0x0 0xffac0000 0x0 0x2000>; + status = "okay"; + }; + sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; @@ -546,12 +562,6 @@ status = "disabled"; }; - dmc: dmc@ff610000 { - u-boot,dm-pre-reloc; - compatible = "rockchip,rk3368-dmc", "syscon"; - reg = <0x0 0xff610000 0x0 0x1000>; - }; - i2c0: i2c@ff650000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>; @@ -647,11 +657,15 @@ }; pmugrf: syscon@ff738000 { - u-boot,dm-pre-reloc; compatible = "rockchip,rk3368-pmugrf", "syscon"; reg = <0x0 0xff738000 0x0 0x1000>; }; + sgrf: syscon@ff740000 { + compatible = "rockchip,rk3368-sgrf", "syscon"; + reg = <0x0 0xff740000 0x0 0x1000>; + }; + cru: clock-controller@ff760000 { compatible = "rockchip,rk3368-cru"; reg = <0x0 0xff760000 0x0 0x1000>; @@ -673,7 +687,7 @@ status = "disabled"; }; - timer@ff810000 { + timer0: timer@ff810000 { compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer"; reg = <0x0 0xff810000 0x0 0x20>; interrupts = ; diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h index cb0a935edc..c7e21bd605 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h @@ -85,7 +85,7 @@ enum { EMMC_PLL_SELECT_24MHZ, EMMC_DIV_SHIFT = 8, - EMMC_DIV_MASK = 0x3f < EMMC_DIV_SHIFT, + EMMC_DIV_MASK = 0x3f << EMMC_DIV_SHIFT, SDIO0_PLL_SHIFT = 6, SDIO0_PLL_MASK = 3 << SDIO0_PLL_SHIFT, diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h index 24a9cc0525..2b1197fd46 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h @@ -89,19 +89,26 @@ enum { MCU_CLK_DIV_SHIFT = 0, MCU_CLK_DIV_MASK = GENMASK(4, 0), + /* CLKSEL43_CON */ + GMAC_MUX_SEL_EXTCLK = BIT(8), + /* CLKSEL51_CON */ MMC_PLL_SEL_SHIFT = 8, MMC_PLL_SEL_MASK = GENMASK(9, 8), - MMC_PLL_SEL_CPLL = 0, - MMC_PLL_SEL_GPLL, - MMC_PLL_SEL_USBPHY_480M, - MMC_PLL_SEL_24M, + MMC_PLL_SEL_CPLL = (0 << MMC_PLL_SEL_SHIFT), + MMC_PLL_SEL_GPLL = (1 << MMC_PLL_SEL_SHIFT), + MMC_PLL_SEL_USBPHY_480M = (2 << MMC_PLL_SEL_SHIFT), + MMC_PLL_SEL_24M = (3 << MMC_PLL_SEL_SHIFT), MMC_CLK_DIV_SHIFT = 0, MMC_CLK_DIV_MASK = GENMASK(6, 0), /* SOFTRST1_CON */ MCU_PO_SRST_MASK = BIT(13), MCU_SYS_SRST_MASK = BIT(12), + DMA1_SRST_REQ = BIT(2), + + /* SOFTRST4_CON */ + DMA2_SRST_REQ = BIT(0), /* GLB_RST_CON */ PMU_GLB_SRST_CTRL_SHIFT = 2, diff --git a/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h b/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h new file mode 100644 index 0000000000..4e2b2337f2 --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ASM_ARCH_DDR_RK3368_H__ +#define __ASM_ARCH_DDR_RK3368_H__ + +/* + * The RK3368 DDR PCTL differs from the incarnation in the RK3288 only + * in a few details. Most notably, it has an additional field to track + * tREFI in controller cycles (i.e. trefi_mem_ddr3). + */ +struct rk3368_ddr_pctl { + u32 scfg; + u32 sctl; + u32 stat; + u32 intrstat; + u32 reserved0[12]; + u32 mcmd; + u32 powctl; + u32 powstat; + u32 cmdtstat; + u32 cmdtstaten; + u32 reserved1[3]; + u32 mrrcfg0; + u32 mrrstat0; + u32 mrrstat1; + u32 reserved2[4]; + u32 mcfg1; + u32 mcfg; + u32 ppcfg; + u32 mstat; + u32 lpddr2zqcfg; + u32 reserved3; + u32 dtupdes; + u32 dtuna; + u32 dtune; + u32 dtuprd0; + u32 dtuprd1; + u32 dtuprd2; + u32 dtuprd3; + u32 dtuawdt; + u32 reserved4[3]; + u32 togcnt1u; + u32 tinit; + u32 trsth; + u32 togcnt100n; + u32 trefi; + u32 tmrd; + u32 trfc; + u32 trp; + u32 trtw; + u32 tal; + u32 tcl; + u32 tcwl; + u32 tras; + u32 trc; + u32 trcd; + u32 trrd; + u32 trtp; + u32 twr; + u32 twtr; + u32 texsr; + u32 txp; + u32 txpdll; + u32 tzqcs; + u32 tzqcsi; + u32 tdqs; + u32 tcksre; + u32 tcksrx; + u32 tcke; + u32 tmod; + u32 trstl; + u32 tzqcl; + u32 tmrr; + u32 tckesr; + u32 tdpd; + u32 trefi_mem_ddr3; + u32 reserved5[45]; + u32 dtuwactl; + u32 dturactl; + u32 dtucfg; + u32 dtuectl; + u32 dtuwd0; + u32 dtuwd1; + u32 dtuwd2; + u32 dtuwd3; + u32 dtuwdm; + u32 dturd0; + u32 dturd1; + u32 dturd2; + u32 dturd3; + u32 dtulfsrwd; + u32 dtulfsrrd; + u32 dtueaf; + u32 dfitctrldelay; + u32 dfiodtcfg; + u32 dfiodtcfg1; + u32 dfiodtrankmap; + u32 dfitphywrdata; + u32 dfitphywrlat; + u32 reserved7[2]; + u32 dfitrddataen; + u32 dfitphyrdlat; + u32 reserved8[2]; + u32 dfitphyupdtype0; + u32 dfitphyupdtype1; + u32 dfitphyupdtype2; + u32 dfitphyupdtype3; + u32 dfitctrlupdmin; + u32 dfitctrlupdmax; + u32 dfitctrlupddly; + u32 reserved9; + u32 dfiupdcfg; + u32 dfitrefmski; + u32 dfitctrlupdi; + u32 reserved10[4]; + u32 dfitrcfg0; + u32 dfitrstat0; + u32 dfitrwrlvlen; + u32 dfitrrdlvlen; + u32 dfitrrdlvlgateen; + u32 dfiststat0; + u32 dfistcfg0; + u32 dfistcfg1; + u32 reserved11; + u32 dfitdramclken; + u32 dfitdramclkdis; + u32 dfistcfg2; + u32 dfistparclr; + u32 dfistparlog; + u32 reserved12[3]; + u32 dfilpcfg0; + u32 reserved13[3]; + u32 dfitrwrlvlresp0; + u32 dfitrwrlvlresp1; + u32 dfitrwrlvlresp2; + u32 dfitrrdlvlresp0; + u32 dfitrrdlvlresp1; + u32 dfitrrdlvlresp2; + u32 dfitrwrlvldelay0; + u32 dfitrwrlvldelay1; + u32 dfitrwrlvldelay2; + u32 dfitrrdlvldelay0; + u32 dfitrrdlvldelay1; + u32 dfitrrdlvldelay2; + u32 dfitrrdlvlgatedelay0; + u32 dfitrrdlvlgatedelay1; + u32 dfitrrdlvlgatedelay2; + u32 dfitrcmd; + u32 reserved14[46]; + u32 ipvr; + u32 iptr; +}; +check_member(rk3368_ddr_pctl, iptr, 0x03fc); + +struct rk3368_ddrphy { + u32 reg[0x100]; +}; +check_member(rk3368_ddrphy, reg[0xff], 0x03fc); + +struct rk3368_msch { + u32 coreid; + u32 revisionid; + u32 ddrconf; + u32 ddrtiming; + u32 ddrmode; + u32 readlatency; + u32 reserved1[8]; + u32 activate; + u32 devtodev; +}; +check_member(rk3368_msch, devtodev, 0x003c); + +/* GRF_SOC_CON0 */ +enum { + NOC_RSP_ERR_STALL = BIT(9), + MOBILE_DDR_SEL = BIT(4), + DDR0_16BIT_EN = BIT(3), + MSCH0_MAINDDR3_DDR3 = BIT(2), + MSCH0_MAINPARTIALPOP = BIT(1), + UPCTL_C_ACTIVE = BIT(0), +}; + +#endif diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3368.h b/arch/arm/include/asm/arch-rockchip/grf_rk3368.h index 93c4e7d4e1..6b6651acab 100644 --- a/arch/arm/include/asm/arch-rockchip/grf_rk3368.h +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3368.h @@ -1,4 +1,6 @@ -/* (C) Copyright 2016 Rockchip Electronics Co., Ltd +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * * SPDX-License-Identifier: GPL-2.0+ */ @@ -74,8 +76,11 @@ struct rk3368_grf { u32 soc_con15; u32 soc_con16; u32 soc_con17; + u32 reserved5[0x6e]; + u32 ddrc0_con0; }; check_member(rk3368_grf, soc_con17, 0x444); +check_member(rk3368_grf, ddrc0_con0, 0x600); struct rk3368_pmu_grf { u32 gpio0a_iomux; @@ -92,323 +97,11 @@ struct rk3368_pmu_grf { u32 gpio0d_drv; u32 gpio0l_sr; u32 gpio0h_sr; - u32 reserved[(0x200 - 0x34) / 4 - 1]; + u32 reserved[0x72]; u32 os_reg[4]; }; -check_member(rk3368_pmu_grf, os_reg[3], 0x20c); - -/*GRF_GPIO0C_IOMUX*/ -enum { - GPIO0C7_SHIFT = 14, - GPIO0C7_MASK = 3 << GPIO0C7_SHIFT, - GPIO0C7_GPIO = 0, - GPIO0C7_LCDC_D19, - GPIO0C7_TRACE_D9, - GPIO0C7_UART1_RTSN, - - GPIO0C6_SHIFT = 12, - GPIO0C6_MASK = 3 << GPIO0C6_SHIFT, - GPIO0C6_GPIO = 0, - GPIO0C6_LCDC_D18, - GPIO0C6_TRACE_D8, - GPIO0C6_UART1_CTSN, - - GPIO0C5_SHIFT = 10, - GPIO0C5_MASK = 3 << GPIO0C5_SHIFT, - GPIO0C5_GPIO = 0, - GPIO0C5_LCDC_D17, - GPIO0C5_TRACE_D7, - GPIO0C5_UART1_SOUT, - - GPIO0C4_SHIFT = 8, - GPIO0C4_MASK = 3 << GPIO0C4_SHIFT, - GPIO0C4_GPIO = 0, - GPIO0C4_LCDC_D16, - GPIO0C4_TRACE_D6, - GPIO0C4_UART1_SIN, - - GPIO0C3_SHIFT = 6, - GPIO0C3_MASK = 3 << GPIO0C3_SHIFT, - GPIO0C3_GPIO = 0, - GPIO0C3_LCDC_D15, - GPIO0C3_TRACE_D5, - GPIO0C3_MCU_JTAG_TDO, - - GPIO0C2_SHIFT = 4, - GPIO0C2_MASK = 3 << GPIO0C2_SHIFT, - GPIO0C2_GPIO = 0, - GPIO0C2_LCDC_D14, - GPIO0C2_TRACE_D4, - GPIO0C2_MCU_JTAG_TDI, - - GPIO0C1_SHIFT = 2, - GPIO0C1_MASK = 3 << GPIO0C1_SHIFT, - GPIO0C1_GPIO = 0, - GPIO0C1_LCDC_D13, - GPIO0C1_TRACE_D3, - GPIO0C1_MCU_JTAG_TRTSN, - - GPIO0C0_SHIFT = 0, - GPIO0C0_MASK = 3 << GPIO0C0_SHIFT, - GPIO0C0_GPIO = 0, - GPIO0C0_LCDC_D12, - GPIO0C0_TRACE_D2, - GPIO0C0_MCU_JTAG_TDO, -}; - -/*GRF_GPIO0D_IOMUX*/ -enum { - GPIO0D7_SHIFT = 14, - GPIO0D7_MASK = 3 << GPIO0D7_SHIFT, - GPIO0D7_GPIO = 0, - GPIO0D7_LCDC_DCLK, - GPIO0D7_TRACE_CTL, - GPIO0D7_PMU_DEBUG5, - - GPIO0D6_SHIFT = 12, - GPIO0D6_MASK = 3 << GPIO0D6_SHIFT, - GPIO0D6_GPIO = 0, - GPIO0D6_LCDC_DEN, - GPIO0D6_TRACE_CLK, - GPIO0D6_PMU_DEBUG4, - - GPIO0D5_SHIFT = 10, - GPIO0D5_MASK = 3 << GPIO0D5_SHIFT, - GPIO0D5_GPIO = 0, - GPIO0D5_LCDC_VSYNC, - GPIO0D5_TRACE_D15, - GPIO0D5_PMU_DEBUG3, - - GPIO0D4_SHIFT = 8, - GPIO0D4_MASK = 3 << GPIO0D4_SHIFT, - GPIO0D4_GPIO = 0, - GPIO0D4_LCDC_HSYNC, - GPIO0D4_TRACE_D14, - GPIO0D4_PMU_DEBUG2, - - GPIO0D3_SHIFT = 6, - GPIO0D3_MASK = 3 << GPIO0D3_SHIFT, - GPIO0D3_GPIO = 0, - GPIO0D3_LCDC_D23, - GPIO0D3_TRACE_D13, - GPIO0D3_UART4_SIN, - - GPIO0D2_SHIFT = 4, - GPIO0D2_MASK = 3 << GPIO0D2_SHIFT, - GPIO0D2_GPIO = 0, - GPIO0D2_LCDC_D22, - GPIO0D2_TRACE_D12, - GPIO0D2_UART4_SOUT, - - GPIO0D1_SHIFT = 2, - GPIO0D1_MASK = 3 << GPIO0D1_SHIFT, - GPIO0D1_GPIO = 0, - GPIO0D1_LCDC_D21, - GPIO0D1_TRACE_D11, - GPIO0D1_UART4_RTSN, - - GPIO0D0_SHIFT = 0, - GPIO0D0_MASK = 3 << GPIO0D0_SHIFT, - GPIO0D0_GPIO = 0, - GPIO0D0_LCDC_D20, - GPIO0D0_TRACE_D10, - GPIO0D0_UART4_CTSN, -}; - -/*GRF_GPIO2A_IOMUX*/ -enum { - GPIO2A7_SHIFT = 14, - GPIO2A7_MASK = 3 << GPIO2A7_SHIFT, - GPIO2A7_GPIO = 0, - GPIO2A7_SDMMC0_D2, - GPIO2A7_JTAG_TCK, - - GPIO2A6_SHIFT = 12, - GPIO2A6_MASK = 3 << GPIO2A6_SHIFT, - GPIO2A6_GPIO = 0, - GPIO2A6_SDMMC0_D1, - GPIO2A6_UART2_SIN, - - GPIO2A5_SHIFT = 10, - GPIO2A5_MASK = 3 << GPIO2A5_SHIFT, - GPIO2A5_GPIO = 0, - GPIO2A5_SDMMC0_D0, - GPIO2A5_UART2_SOUT, - - GPIO2A4_SHIFT = 8, - GPIO2A4_MASK = 3 << GPIO2A4_SHIFT, - GPIO2A4_GPIO = 0, - GPIO2A4_FLASH_DQS, - GPIO2A4_EMMC_CLKO, - - GPIO2A3_SHIFT = 6, - GPIO2A3_MASK = 3 << GPIO2A3_SHIFT, - GPIO2A3_GPIO = 0, - GPIO2A3_FLASH_CSN3, - GPIO2A3_EMMC_RSTNO, - - GPIO2A2_SHIFT = 4, - GPIO2A2_MASK = 3 << GPIO2A2_SHIFT, - GPIO2A2_GPIO = 0, - GPIO2A2_FLASH_CSN2, - - GPIO2A1_SHIFT = 2, - GPIO2A1_MASK = 3 << GPIO2A1_SHIFT, - GPIO2A1_GPIO = 0, - GPIO2A1_FLASH_CSN1, - - GPIO2A0_SHIFT = 0, - GPIO2A0_MASK = 3 << GPIO2A0_SHIFT, - GPIO2A0_GPIO = 0, - GPIO2A0_FLASH_CSN0, -}; - -/*GRF_GPIO2D_IOMUX*/ -enum { - GPIO2D7_SHIFT = 14, - GPIO2D7_MASK = 3 << GPIO2D7_SHIFT, - GPIO2D7_GPIO = 0, - GPIO2D7_SDIO0_D3, - - GPIO2D6_SHIFT = 12, - GPIO2D6_MASK = 3 << GPIO2D6_SHIFT, - GPIO2D6_GPIO = 0, - GPIO2D6_SDIO0_D2, - - GPIO2D5_SHIFT = 10, - GPIO2D5_MASK = 3 << GPIO2D5_SHIFT, - GPIO2D5_GPIO = 0, - GPIO2D5_SDIO0_D1, - - GPIO2D4_SHIFT = 8, - GPIO2D4_MASK = 3 << GPIO2D4_SHIFT, - GPIO2D4_GPIO = 0, - GPIO2D4_SDIO0_D0, - - GPIO2D3_SHIFT = 6, - GPIO2D3_MASK = 3 << GPIO2D3_SHIFT, - GPIO2D3_GPIO = 0, - GPIO2D3_UART0_RTS0, - - GPIO2D2_SHIFT = 4, - GPIO2D2_MASK = 3 << GPIO2D2_SHIFT, - GPIO2D2_GPIO = 0, - GPIO2D2_UART0_CTS0, - - GPIO2D1_SHIFT = 2, - GPIO2D1_MASK = 3 << GPIO2D1_SHIFT, - GPIO2D1_GPIO = 0, - GPIO2D1_UART0_SOUT, - - GPIO2D0_SHIFT = 0, - GPIO2D0_MASK = 3 << GPIO2D0_SHIFT, - GPIO2D0_GPIO = 0, - GPIO2D0_UART0_SIN, -}; - -/*GRF_GPIO3C_IOMUX*/ -enum { - GPIO3C7_SHIFT = 14, - GPIO3C7_MASK = 3 << GPIO3C7_SHIFT, - GPIO3C7_GPIO = 0, - GPIO3C7_EDPHDMI_CECINOUT, - GPIO3C7_ISP_FLASHTRIGIN, - - GPIO3C6_SHIFT = 12, - GPIO3C6_MASK = 3 << GPIO3C6_SHIFT, - GPIO3C6_GPIO = 0, - GPIO3C6_MAC_CLK, - GPIO3C6_ISP_SHUTTERTRIG, - - GPIO3C5_SHIFT = 10, - GPIO3C5_MASK = 3 << GPIO3C5_SHIFT, - GPIO3C5_GPIO = 0, - GPIO3C5_MAC_RXER, - GPIO3C5_ISP_PRELIGHTTRIG, - - GPIO3C4_SHIFT = 8, - GPIO3C4_MASK = 3 << GPIO3C4_SHIFT, - GPIO3C4_GPIO = 0, - GPIO3C4_MAC_RXDV, - GPIO3C4_ISP_FLASHTRIGOUT, - - GPIO3C3_SHIFT = 6, - GPIO3C3_MASK = 3 << GPIO3C3_SHIFT, - GPIO3C3_GPIO = 0, - GPIO3C3_MAC_RXDV, - GPIO3C3_EMMC_RSTNO, - - GPIO3C2_SHIFT = 4, - GPIO3C2_MASK = 3 << GPIO3C2_SHIFT, - GPIO3C2_MAC_MDC = 0, - GPIO3C2_ISP_SHUTTEREN, - - GPIO3C1_SHIFT = 2, - GPIO3C1_MASK = 3 << GPIO3C1_SHIFT, - GPIO3C1_GPIO = 0, - GPIO3C1_MAC_RXD2, - GPIO3C1_UART3_RTSN, - - GPIO3C0_SHIFT = 0, - GPIO3C0_MASK = 3 << GPIO3C0_SHIFT, - GPIO3C0_GPIO = 0, - GPIO3C0_MAC_RXD1, - GPIO3C0_UART3_CTSN, - GPIO3C0_GPS_RFCLK, -}; - -/*GRF_GPIO3D_IOMUX*/ -enum { - GPIO3D7_SHIFT = 14, - GPIO3D7_MASK = 3 << GPIO3D7_SHIFT, - GPIO3D7_GPIO = 0, - GPIO3D7_SC_VCC18V, - GPIO3D7_I2C2_SDA, - GPIO3D7_GPUJTAG_TCK, - - GPIO3D6_SHIFT = 12, - GPIO3D6_MASK = 3 << GPIO3D6_SHIFT, - GPIO3D6_GPIO = 0, - GPIO3D6_IR_TX, - GPIO3D6_UART3_SOUT, - GPIO3D6_PWM3, - - GPIO3D5_SHIFT = 10, - GPIO3D5_MASK = 3 << GPIO3D5_SHIFT, - GPIO3D5_GPIO = 0, - GPIO3D5_IR_RX, - GPIO3D5_UART3_SIN, - - GPIO3D4_SHIFT = 8, - GPIO3D4_MASK = 3 << GPIO3D4_SHIFT, - GPIO3D4_GPIO = 0, - GPIO3D4_MAC_TXCLKOUT, - GPIO3D4_SPI1_CSN1, - - GPIO3D3_SHIFT = 6, - GPIO3D3_MASK = 3 << GPIO3D3_SHIFT, - GPIO3D3_GPIO = 0, - GPIO3D3_HDMII2C_SCL, - GPIO3D3_I2C5_SCL, - - GPIO3D2_SHIFT = 4, - GPIO3D2_MASK = 3 << GPIO3D2_SHIFT, - GPIO3D2_GPIO = 0, - GPIO3D2_HDMII2C_SDA, - GPIO3D2_I2C5_SDA, - - GPIO3D1_SHIFT = 2, - GPIO3D1_MASK = 3 << GPIO3D1_SHIFT, - GPIO3D1_GPIO = 0, - GPIO3D1_MAC_RXCLKIN, - GPIO3D1_I2C4_SCL, - - GPIO3D0_SHIFT = 0, - GPIO3D0_MASK = 3 << GPIO3D0_SHIFT, - GPIO3D0_GPIO = 0, - GPIO3D0_MAC_MDIO, - GPIO3D0_I2C4_SDA, -}; +check_member(rk3368_pmu_grf, gpio0h_sr, 0x34); +check_member(rk3368_pmu_grf, os_reg[0], 0x200); /*GRF_SOC_CON11/12/13*/ enum { @@ -439,4 +132,5 @@ enum { MCU_CODE_BASE_BIT31_BIT28_SHIFT = 0, MCU_CODE_BASE_BIT31_BIT28_MASK = GENMASK(3, 0), }; + #endif diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index 0e674704ab..df45511699 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -30,6 +30,7 @@ enum { BOOT_DEVICE_BOARD, BOOT_DEVICE_DFU, BOOT_DEVICE_XIP, + BOOT_DEVICE_BOOTROM, BOOT_DEVICE_NONE }; #endif diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index 57e728f9f2..62fad452b2 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -69,7 +69,9 @@ ENTRY(_main) /* * Set up initial C runtime environment and call board_init_f(0). */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK) + ldr x0, =(CONFIG_TPL_STACK) +#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) ldr x0, =(CONFIG_SPL_STACK) #else ldr x0, =(CONFIG_SYS_INIT_SP_ADDR) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 23ddc6296d..20f7eeaf09 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -199,4 +199,8 @@ source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" +config SPL_LDSCRIPT + default "arch/arm/mach-at91/arm926ejs/u-boot-spl.lds" if CPU_ARM926EJS + default "arch/arm/mach-at91/armv7/u-boot-spl.lds" if CPU_V7 + endif diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 4757f2496d..35e4e9bcea 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -53,4 +53,8 @@ source "board/davinci/ea20/Kconfig" source "board/omicron/calimain/Kconfig" source "board/lego/ev3/Kconfig" +config SPL_LDSCRIPT + default "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" if TARGET_IPAM390 + default "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" + endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d1aa68db20..8b1389f30f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -161,4 +161,7 @@ source "board/samsung/smdk5250/Kconfig" source "board/samsung/smdk5420/Kconfig" source "board/samsung/espresso7420/Kconfig" +config SPL_LDSCRIPT + default "board/samsung/common/exynos-uboot-spl.lds" if ARCH_EXYNOS5 || ARCH_EXYNOS4 + endif diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 89c91d1b77..72832ad099 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -170,4 +170,7 @@ source "board/ti/am335x/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" +config SPL_LDSCRIPT + default "arch/arm/mach-omap2/u-boot-spl.lds" + endif diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 7644b8dc85..2984a3edda 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -15,4 +15,7 @@ config SYS_SOC source "board/LaCie/edminiv2/Kconfig" +config SPL_LDSCRIPT + default "$(CPUDIR)/orion5x/u-boot-spl.lds" if ORION5X + endif diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index c9246132e0..d9b25d5de4 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -67,14 +67,42 @@ config ROCKCHIP_RK3328 config ROCKCHIP_RK3368 bool "Support Rockchip RK3368" select ARM64 + select SUPPORT_SPL + select SUPPORT_TPL + select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL + select TPL_NEEDS_SEPARATE_STACK if TPL + imply SPL_SEPARATE_BSS + imply SPL_SERIAL_SUPPORT + imply TPL_SERIAL_SUPPORT + select ENABLE_ARM_SOC_BOOT0_HOOK + select DEBUG_UART_BOARD_INIT select SYS_NS16550 help - The Rockchip RK3328 is a ARM-based SoC with a octa-core Cortex-A53. - including NEON and GPU, 512KB L2 cache for big cluster and 256 KB - L2 cache for little cluser, PowerVR G6110 based graphics, one video - output processor supporting LVDS、HDMI、eDP, several DDR3 options - and video codec support. Peripherals include Gigabit Ethernet, - USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. + The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised + into a big and little cluster with 4 cores each) Cortex-A53 including + AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache + (for the little cluster), PowerVR G6110 based graphics, one video + output processor supporting LVDS/HDMI/eDP, several DDR3 options and + video codec support. + + On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO, + I2S, UARTs, SPI, I2C and PWMs. + +if ROCKCHIP_RK3368 + +config TPL_LDSCRIPT + default "arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds" + +config TPL_TEXT_BASE + default 0xff8c1000 + +config TPL_MAX_SIZE + default 28672 + +config TPL_STACK + default 0xff8cffff + +endif config ROCKCHIP_RK3399 bool "Support Rockchip RK3399" @@ -101,10 +129,21 @@ config ROCKCHIP_RV1108 The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7 and a DSP. -config ROCKCHIP_SPL_BACK_TO_BROM +config SPL_ROCKCHIP_BACK_TO_BROM bool "SPL returns to bootrom" default y if ROCKCHIP_RK3036 select ROCKCHIP_BROM_HELPER + depends on SPL + help + Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, + SPL will return to the boot rom, which will then load the U-Boot + binary to keep going on. + +config TPL_ROCKCHIP_BACK_TO_BROM + bool "TPL returns to bootrom" + default y if ROCKCHIP_RK3368 + select ROCKCHIP_BROM_HELPER + depends on TPL help Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, SPL will return to the boot rom, which will then load the U-Boot @@ -122,7 +161,7 @@ config ROCKCHIP_BROM_HELPER bool config SPL_MMC_SUPPORT - default y if !ROCKCHIP_SPL_BACK_TO_BROM + default y if !SPL_ROCKCHIP_BACK_TO_BROM source "arch/arm/mach-rockchip/rk3036/Kconfig" source "arch/arm/mach-rockchip/rk3188/Kconfig" diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index cb8d3efe4b..79e9704a2c 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -4,39 +4,50 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o - -ifdef CONFIG_TPL_BUILD -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o -else ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o -else +# We don't want the bootrom-helper present in a full U-Boot build, as +# this may have entered from ATF with the stack-pointer pointing to +# inaccessible/protected memory (and the bootrom-helper assumes that +# the stack-pointer is valid before switching to the U-Boot stack). +obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o +obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o + +obj-tpl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o +obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o + +obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o +obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o + +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o -ifdef CONFIG_RAM -obj-y += sdram_common.o -endif endif + +obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o + ifndef CONFIG_ARM64 obj-y += rk_timer.o endif -obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ +obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ ifndef CONFIG_TPL_BUILD obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/ endif - obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/ obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/ obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/ obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/ obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/ obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/ + +# Clear out SPL objects, in case this is a TPL build +obj-spl-$(CONFIG_TPL_BUILD) = + +# Now add SPL/TPL objects back into the main build +obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y) +obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y) diff --git a/arch/arm/mach-rockchip/bootrom.c b/arch/arm/mach-rockchip/bootrom.c index 4ca9962310..8380e4e006 100644 --- a/arch/arm/mach-rockchip/bootrom.c +++ b/arch/arm/mach-rockchip/bootrom.c @@ -9,8 +9,8 @@ void back_to_bootrom(void) { -#if defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && !defined(CONFIG_TPL_BUILD) - puts("Returning to boot ROM..."); +#if CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT) + puts("Returning to boot ROM...\n"); #endif _back_to_bootrom_s(); } diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c index c3e174db9e..d3866bf029 100644 --- a/arch/arm/mach-rockchip/rk3188-board-spl.c +++ b/arch/arm/mach-rockchip/rk3188-board-spl.c @@ -167,8 +167,7 @@ void board_init_f(ulong dummy) } setup_arm_clock(); - -#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif } @@ -229,7 +228,7 @@ void spl_board_init(void) } preloader_console_init(); -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) back_to_bootrom(); #endif return; diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c index 3e76100ad1..622e046dc0 100644 --- a/arch/arm/mach-rockchip/rk3188-board.c +++ b/arch/arm/mach-rockchip/rk3188-board.c @@ -39,7 +39,7 @@ int board_late_init(void) int board_init(void) { -#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) struct udevice *pinctrl; int ret; diff --git a/arch/arm/mach-rockchip/rk3188/Kconfig b/arch/arm/mach-rockchip/rk3188/Kconfig index d129fcda99..2bb35662d1 100644 --- a/arch/arm/mach-rockchip/rk3188/Kconfig +++ b/arch/arm/mach-rockchip/rk3188/Kconfig @@ -30,9 +30,6 @@ config TPL_LIBCOMMON_SUPPORT config TPL_LIBGENERIC_SUPPORT default y -config TPL_SERIAL_SUPPORT - default y - source "board/radxa/rock/Kconfig" endif diff --git a/arch/arm/mach-rockchip/rk322x-board-spl.c b/arch/arm/mach-rockchip/rk322x-board-spl.c index 15216c74b0..4ddb8ba065 100644 --- a/arch/arm/mach-rockchip/rk322x-board-spl.c +++ b/arch/arm/mach-rockchip/rk322x-board-spl.c @@ -41,6 +41,8 @@ static struct rk322x_grf * const grf = (void *)GRF_BASE; CON_IOMUX_UART2SEL_MASK, CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT); } + +#define SGRF_DDR_CON0 0x10150000 void board_init_f(ulong dummy) { struct udevice *dev; @@ -71,6 +73,8 @@ void board_init_f(ulong dummy) return; } + /* Disable the ddr secure region setting to make it non-secure */ + rk_clrreg(SGRF_DDR_CON0, 0x4000); #if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index 5668fd28a0..6b7bf85d8d 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -249,7 +249,7 @@ void board_init_f(ulong dummy) debug("DRAM init failed: %d\n", ret); return; } -#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif } @@ -316,7 +316,7 @@ void spl_board_init(void) } preloader_console_init(); -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) back_to_bootrom(); #endif return; diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c index 613967c307..d5f568c793 100644 --- a/arch/arm/mach-rockchip/rk3288-board.c +++ b/arch/arm/mach-rockchip/rk3288-board.c @@ -78,7 +78,7 @@ int board_late_init(void) return rk_board_late_init(); } -#ifndef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if !CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) static int veyron_init(void) { struct udevice *dev; @@ -115,7 +115,7 @@ static int veyron_init(void) int board_init(void) { -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) struct udevice *pinctrl; int ret; diff --git a/arch/arm/mach-rockchip/rk3368-board-spl.c b/arch/arm/mach-rockchip/rk3368-board-spl.c new file mode 100644 index 0000000000..cabf344486 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3368-board-spl.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void board_debug_uart_init(void) +{ +} + +void board_init_f(ulong dummy) +{ + struct udevice *pinctrl; + struct udevice *dev; + int ret; + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + /* Set up our preloader console */ + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + error("%s: pinctrl init failed: %d\n", __func__, ret); + hang(); + } + + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART0); + if (ret) { + error("%s: failed to set up console UART\n", __func__); + hang(); + } + + preloader_console_init(); + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } +} + +u32 spl_boot_mode(const u32 boot_device) +{ + return MMCSD_MODE_RAW; +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_MMC1; +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif diff --git a/arch/arm/mach-rockchip/rk3368-board-tpl.c b/arch/arm/mach-rockchip/rk3368-board-tpl.c new file mode 100644 index 0000000000..b3e6ffa781 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3368-board-tpl.c @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * The SPL (and also the full U-Boot stage on the RK3368) will run in + * secure mode (i.e. EL3) and an ATF will eventually be booted before + * starting up the operating system... so we can initialize the SGRF + * here and rely on the ATF installing the final (secure) policy + * later. + */ +static inline uintptr_t sgrf_soc_con_addr(unsigned no) +{ + const uintptr_t SGRF_BASE = + (uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF); + + return SGRF_BASE + sizeof(u32) * no; +} + +static inline uintptr_t sgrf_busdmac_addr(unsigned no) +{ + const uintptr_t SGRF_BASE = + (uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF); + const uintptr_t SGRF_BUSDMAC_OFFSET = 0x100; + const uintptr_t SGRF_BUSDMAC_BASE = SGRF_BASE + SGRF_BUSDMAC_OFFSET; + + return SGRF_BUSDMAC_BASE + sizeof(u32) * no; +} + +static void sgrf_init(void) +{ + struct rk3368_cru * const cru = + (struct rk3368_cru * const)rockchip_get_cru(); + const u16 SGRF_SOC_CON_SEC = GENMASK(15, 0); + const u16 SGRF_BUSDMAC_CON0_SEC = BIT(2); + const u16 SGRF_BUSDMAC_CON1_SEC = GENMASK(15, 12); + + /* Set all configurable IP to 'non secure'-mode */ + rk_setreg(sgrf_soc_con_addr(5), SGRF_SOC_CON_SEC); + rk_setreg(sgrf_soc_con_addr(6), SGRF_SOC_CON_SEC); + rk_setreg(sgrf_soc_con_addr(7), SGRF_SOC_CON_SEC); + + /* + * From rockchip-uboot/arch/arm/cpu/armv8/rk33xx/cpu.c + * Original comment: "ddr space set no secure mode" + */ + rk_clrreg(sgrf_soc_con_addr(8), SGRF_SOC_CON_SEC); + rk_clrreg(sgrf_soc_con_addr(9), SGRF_SOC_CON_SEC); + rk_clrreg(sgrf_soc_con_addr(10), SGRF_SOC_CON_SEC); + + /* Set 'secure dma' to 'non secure'-mode */ + rk_setreg(sgrf_busdmac_addr(0), SGRF_BUSDMAC_CON0_SEC); + rk_setreg(sgrf_busdmac_addr(1), SGRF_BUSDMAC_CON1_SEC); + + dsb(); /* barrier */ + + rk_setreg(&cru->softrst_con[1], DMA1_SRST_REQ); + rk_setreg(&cru->softrst_con[4], DMA2_SRST_REQ); + + dsb(); /* barrier */ + udelay(10); + + rk_clrreg(&cru->softrst_con[1], DMA1_SRST_REQ); + rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ); +} + +void board_debug_uart_init(void) +{ + /* + * N.B.: This is called before the device-model has been + * initialised. For this reason, we can not access + * the GRF address range using the syscon API. + */ + struct rk3368_grf * const grf = + (struct rk3368_grf * const)0xff770000; + + enum { + GPIO2D1_MASK = GENMASK(3, 2), + GPIO2D1_GPIO = 0, + GPIO2D1_UART0_SOUT = (1 << 2), + + GPIO2D0_MASK = GENMASK(1, 0), + GPIO2D0_GPIO = 0, + GPIO2D0_UART0_SIN = (1 << 0), + }; + +#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) + /* Enable early UART0 on the RK3368 */ + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D0_MASK, GPIO2D0_UART0_SIN); + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D1_MASK, GPIO2D1_UART0_SOUT); +#endif +} + +void board_init_f(ulong dummy) +{ + struct udevice *dev; + int ret; + +#define EARLY_UART +#ifdef EARLY_UART + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + debug_uart_init(); + printascii("U-Boot TPL board init\n"); +#endif + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + /* Reset security, so we can use DMA in the MMC drivers */ + sgrf_init(); + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } +} + +void board_return_to_bootrom(void) +{ + back_to_bootrom(); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_BOOTROM; +} diff --git a/arch/arm/mach-rockchip/rk3368/Kconfig b/arch/arm/mach-rockchip/rk3368/Kconfig index 6d32068920..7c9b722b00 100644 --- a/arch/arm/mach-rockchip/rk3368/Kconfig +++ b/arch/arm/mach-rockchip/rk3368/Kconfig @@ -3,6 +3,26 @@ if ROCKCHIP_RK3368 choice prompt "RK3368 board" +config TARGET_LION_RK3368 + bool "Theobroma Systems RK3368-uQ7 (Lion) module" + help + The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm, + MXM-230 connector) system-on-module designed by Theobroma + Systems for industrial applications. + + It provides the following features: + - 8x Cortex-A53 (in 2 clusters of 4 cores each) + - (on-module) up to 4GB of DDR3 memory + - (on-module) SPI-NOR flash + - (on-module) eMMC + - Gigabit Ethernet (with an on-module KSZ9031 PHY) + - USB + - HDMI + - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group) + - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...) + - on-module STM32 providing CAN, RTC and fan-control + - (optional on-module) EAL4+-certified security module + config TARGET_SHEEP bool "Sheep board" help @@ -25,8 +45,12 @@ endchoice config SYS_SOC default "rockchip" +source "board/theobroma-systems/lion_rk3368/Kconfig" source "board/rockchip/sheep_rk3368/Kconfig" source "board/geekbuying/geekbox/Kconfig" source "board/rockchip/evb_px5/Kconfig" +config SPL_LDSCRIPT + default "arch/arm/cpu/armv8/u-boot-spl.lds" + endif diff --git a/arch/arm/mach-rockchip/rk3368/Makefile b/arch/arm/mach-rockchip/rk3368/Makefile index 0390716410..46798c2e93 100644 --- a/arch/arm/mach-rockchip/rk3368/Makefile +++ b/arch/arm/mach-rockchip/rk3368/Makefile @@ -5,5 +5,4 @@ # obj-y += clk_rk3368.o obj-y += rk3368.o -obj-y += sdram_rk3368.o obj-y += syscon_rk3368.o diff --git a/arch/arm/mach-rockchip/rk3368/sdram_rk3368.c b/arch/arm/mach-rockchip/rk3368/sdram_rk3368.c deleted file mode 100644 index d0d090087b..0000000000 --- a/arch/arm/mach-rockchip/rk3368/sdram_rk3368.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd. - * - * SPDX-License-Identifier: GPL-2.0 - */ - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; -struct dram_info { - struct ram_info info; - struct rk3368_pmu_grf *pmugrf; -}; - -static int rk3368_dmc_probe(struct udevice *dev) -{ - struct dram_info *priv = dev_get_priv(dev); - - priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); - debug("%s: grf=%p\n", __func__, priv->pmugrf); - priv->info.base = CONFIG_SYS_SDRAM_BASE; - priv->info.size = rockchip_sdram_size( - (phys_addr_t)&priv->pmugrf->os_reg[2]); - - return 0; -} - -static int rk3368_dmc_get_info(struct udevice *dev, struct ram_info *info) -{ - struct dram_info *priv = dev_get_priv(dev); - - *info = priv->info; - - return 0; -} - -static struct ram_ops rk3368_dmc_ops = { - .get_info = rk3368_dmc_get_info, -}; - - -static const struct udevice_id rk3368_dmc_ids[] = { - { .compatible = "rockchip,rk3368-dmc" }, - { } -}; - -U_BOOT_DRIVER(dmc_rk3368) = { - .name = "rockchip_rk3368_dmc", - .id = UCLASS_RAM, - .of_match = rk3368_dmc_ids, - .ops = &rk3368_dmc_ops, - .probe = rk3368_dmc_probe, - .priv_auto_alloc_size = sizeof(struct dram_info), -}; diff --git a/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c b/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c index 03e97eb629..99d51f0edc 100644 --- a/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c +++ b/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c @@ -1,6 +1,8 @@ /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd * Author: Andy Yan + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * * SPDX-License-Identifier: GPL-2.0+ */ @@ -14,6 +16,10 @@ static const struct udevice_id rk3368_syscon_ids[] = { .data = ROCKCHIP_SYSCON_GRF }, { .compatible = "rockchip,rk3368-pmugrf", .data = ROCKCHIP_SYSCON_PMUGRF }, + { .compatible = "rockchip,rk3368-msch", + .data = ROCKCHIP_SYSCON_MSCH }, + { .compatible = "rockchip,rk3368-sgrf", + .data = ROCKCHIP_SYSCON_SGRF }, { } }; @@ -22,3 +28,41 @@ U_BOOT_DRIVER(syscon_rk3368) = { .id = UCLASS_SYSCON, .of_match = rk3368_syscon_ids, }; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +static int rk3368_syscon_bind_of_platdata(struct udevice *dev) +{ + dev->driver_data = dev->driver->of_match->data; + debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data); + + return 0; +} + +U_BOOT_DRIVER(rockchip_rk3368_grf) = { + .name = "rockchip_rk3368_grf", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids, + .bind = rk3368_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_rk3368_pmugrf) = { + .name = "rockchip_rk3368_pmugrf", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids + 1, + .bind = rk3368_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_rk3368_msch) = { + .name = "rockchip_rk3368_msch", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids + 2, + .bind = rk3368_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_rk3368_sgrf) = { + .name = "rockchip_rk3368_sgrf", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids + 3, + .bind = rk3368_syscon_bind_of_platdata, +}; +#endif diff --git a/arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds b/arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds new file mode 100644 index 0000000000..cc59844735 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds @@ -0,0 +1,13 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#undef CONFIG_SPL_TEXT_BASE +#define CONFIG_SPL_TEXT_BASE CONFIG_TPL_TEXT_BASE + +#undef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE CONFIG_TPL_MAX_SIZE + +#include "../../cpu/armv8/u-boot-spl.lds" diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index e050affac0..a13b717bbd 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -8,9 +8,6 @@ #include #include #include -#include -#include -#include #include #include #include @@ -21,111 +18,10 @@ #include #include #include -#include -#include -#include #include DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OF_CONTROL) -static int spl_node_to_boot_device(int node) -{ - struct udevice *parent; - - /* - * This should eventually move into the SPL code, once SPL becomes - * aware of the block-device layer. Until then (and to avoid unneeded - * delays in getting this feature out, it lives at the board-level). - */ - if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { - struct udevice *dev; - struct blk_desc *desc = NULL; - - for (device_find_first_child(parent, &dev); - dev; - device_find_next_child(&dev)) { - if (device_get_uclass_id(dev) == UCLASS_BLK) { - desc = dev_get_uclass_platdata(dev); - break; - } - } - - if (!desc) - return -ENOENT; - - switch (desc->devnum) { - case 0: - return BOOT_DEVICE_MMC1; - case 1: - return BOOT_DEVICE_MMC2; - default: - return -ENOSYS; - } - } - - /* - * SPL doesn't differentiate SPI flashes, so we keep the detection - * brief and inaccurate... hopefully, the common SPL layer can be - * extended with awareness of the BLK layer (and matching OF_CONTROL) - * soon. - */ - if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent)) - return BOOT_DEVICE_SPI; - - return -1; -} - -void board_boot_order(u32 *spl_boot_list) -{ - const void *blob = gd->fdt_blob; - int chosen_node = fdt_path_offset(blob, "/chosen"); - int idx = 0; - int elem; - int boot_device; - int node; - const char *conf; - - if (chosen_node < 0) { - debug("%s: /chosen not found, using spl_boot_device()\n", - __func__); - spl_boot_list[0] = spl_boot_device(); - return; - } - - for (elem = 0; - (conf = fdt_stringlist_get(blob, chosen_node, - "u-boot,spl-boot-order", elem, NULL)); - elem++) { - /* First check if the list element is an alias */ - const char *alias = fdt_get_alias(blob, conf); - if (alias) - conf = alias; - - /* Try to resolve the config item (or alias) as a path */ - node = fdt_path_offset(blob, conf); - if (node < 0) { - debug("%s: could not find %s in FDT", __func__, conf); - continue; - } - - /* Try to map this back onto SPL boot devices */ - boot_device = spl_node_to_boot_device(node); - if (boot_device < 0) { - debug("%s: could not map node @%x to a boot-device\n", - __func__, node); - continue; - } - - spl_boot_list[idx++] = boot_device; - } - - /* If we had no matches, fall back to spl_boot_device */ - if (idx == 0) - spl_boot_list[0] = spl_boot_device(); -} -#endif - u32 spl_boot_device(void) { return BOOT_DEVICE_MMC1; @@ -263,7 +159,7 @@ void spl_board_init(void) } preloader_console_init(); -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) back_to_bootrom(); #endif diff --git a/arch/arm/mach-rockchip/save_boot_param.S b/arch/arm/mach-rockchip/save_boot_param.S index 5e6c8dba13..50fce207a5 100644 --- a/arch/arm/mach-rockchip/save_boot_param.S +++ b/arch/arm/mach-rockchip/save_boot_param.S @@ -1,11 +1,47 @@ /* * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * * SPDX-License-Identifier: GPL-2.0+ */ #include +#if defined(CONFIG_ARM64) +.globl SAVE_SP_ADDR +SAVE_SP_ADDR: + .quad 0 + +ENTRY(save_boot_params) + sub sp, sp, #0x60 + stp x29, x30, [sp, #0x50] + stp x27, x28, [sp, #0x40] + stp x25, x26, [sp, #0x30] + stp x23, x24, [sp, #0x20] + stp x21, x22, [sp, #0x10] + stp x19, x20, [sp, #0] + ldr x8, =SAVE_SP_ADDR + mov x9, sp + str x9, [x8] + b save_boot_params_ret /* back to my caller */ +ENDPROC(save_boot_params) + +.globl _back_to_bootrom_s +ENTRY(_back_to_bootrom_s) + ldr x0, =SAVE_SP_ADDR + ldr x0, [x0] + mov sp, x0 + ldp x29, x30, [sp, #0x50] + ldp x27, x28, [sp, #0x40] + ldp x25, x26, [sp, #0x30] + ldp x23, x24, [sp, #0x20] + ldp x21, x22, [sp, #0x10] + ldp x19, x20, [sp] + add sp, sp, #0x60 + mov x0, xzr + ret +ENDPROC(_back_to_bootrom_s) +#else .globl SAVE_SP_ADDR SAVE_SP_ADDR: .word 0 @@ -30,3 +66,4 @@ ENTRY(_back_to_bootrom_s) mov r0, #0 pop {r1-r12, pc} ENDPROC(_back_to_bootrom_s) +#endif diff --git a/arch/arm/mach-rockchip/spl-boot-order.c b/arch/arm/mach-rockchip/spl-boot-order.c new file mode 100644 index 0000000000..4f78c72720 --- /dev/null +++ b/arch/arm/mach-rockchip/spl-boot-order.c @@ -0,0 +1,108 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#if CONFIG_IS_ENABLED(OF_CONTROL) +static int spl_node_to_boot_device(int node) +{ + struct udevice *parent; + + /* + * This should eventually move into the SPL code, once SPL becomes + * aware of the block-device layer. Until then (and to avoid unneeded + * delays in getting this feature out, it lives at the board-level). + */ + if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { + struct udevice *dev; + struct blk_desc *desc = NULL; + + for (device_find_first_child(parent, &dev); + dev; + device_find_next_child(&dev)) { + if (device_get_uclass_id(dev) == UCLASS_BLK) { + desc = dev_get_uclass_platdata(dev); + break; + } + } + + if (!desc) + return -ENOENT; + + switch (desc->devnum) { + case 0: + return BOOT_DEVICE_MMC1; + case 1: + return BOOT_DEVICE_MMC2; + default: + return -ENOSYS; + } + } + + /* + * SPL doesn't differentiate SPI flashes, so we keep the detection + * brief and inaccurate... hopefully, the common SPL layer can be + * extended with awareness of the BLK layer (and matching OF_CONTROL) + * soon. + */ + if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent)) + return BOOT_DEVICE_SPI; + + return -1; +} + +void board_boot_order(u32 *spl_boot_list) +{ + const void *blob = gd->fdt_blob; + int chosen_node = fdt_path_offset(blob, "/chosen"); + int idx = 0; + int elem; + int boot_device; + int node; + const char *conf; + + if (chosen_node < 0) { + debug("%s: /chosen not found, using spl_boot_device()\n", + __func__); + spl_boot_list[0] = spl_boot_device(); + return; + } + + for (elem = 0; + (conf = fdt_stringlist_get(blob, chosen_node, + "u-boot,spl-boot-order", elem, NULL)); + elem++) { + /* First check if the list element is an alias */ + const char *alias = fdt_get_alias(blob, conf); + if (alias) + conf = alias; + + /* Try to resolve the config item (or alias) as a path */ + node = fdt_path_offset(blob, conf); + if (node < 0) { + debug("%s: could not find %s in FDT", __func__, conf); + continue; + } + + /* Try to map this back onto SPL boot devices */ + boot_device = spl_node_to_boot_device(node); + if (boot_device < 0) { + debug("%s: could not map node @%x to a boot-device\n", + __func__, node); + continue; + } + + spl_boot_list[idx++] = boot_device; + } + + /* If we had no matches, fall back to spl_boot_device */ + if (idx == 0) + spl_boot_list[0] = spl_boot_device(); +} +#endif diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 94412bac0c..386befb4e7 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,8 @@ if ARCH_SUNXI +config SPL_LDSCRIPT + default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64 + config IDENT_STRING default " Allwinner Technology" diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index c428ce5cc7..b9cd45ba09 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,5 +1,8 @@ if ARCH_ZYNQ +config SPL_LDSCRIPT + default "arch/arm/mach-zynq/u-boot-spl.lds" + config SPL_FAT_SUPPORT default y diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 20fa25b5cc..f791c0081e 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -21,4 +21,7 @@ endchoice source "board/xilinx/microblaze-generic/Kconfig" +config SPL_LDSCRIPT + default "arch/microblaze/cpu/u-boot-spl.lds" + endmenu diff --git a/board/armadeus/apf27/Kconfig b/board/armadeus/apf27/Kconfig index 65544a8448..a342d2e05e 100644 --- a/board/armadeus/apf27/Kconfig +++ b/board/armadeus/apf27/Kconfig @@ -1,5 +1,8 @@ if TARGET_APF27 +config SPL_LDSCRIPT + default "arch/$(ARCH)/cpu/u-boot-spl.lds" + config SYS_BOARD default "apf27" diff --git a/board/freescale/mx31pdk/Kconfig b/board/freescale/mx31pdk/Kconfig index 055545c930..b9fc2d5177 100644 --- a/board/freescale/mx31pdk/Kconfig +++ b/board/freescale/mx31pdk/Kconfig @@ -1,5 +1,8 @@ if TARGET_MX31PDK +config SPL_LDSCRIPT + default "arch/$(ARCH)/cpu/u-boot-spl.lds" + config SYS_BOARD default "mx31pdk" diff --git a/board/rockchip/evb_px5/evb-px5.c b/board/rockchip/evb_px5/evb-px5.c index 6dca1fc74b..6a47642b57 100644 --- a/board/rockchip/evb_px5/evb-px5.c +++ b/board/rockchip/evb_px5/evb-px5.c @@ -4,30 +4,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int mach_cpu_init(void) -{ - struct rk3368_pmu_grf *pmugrf; - int node; - - node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "rockchip,rk3368-pmugrf"); - pmugrf = (struct rk3368_pmu_grf *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); - - rk_clrsetreg(&pmugrf->gpio0d_iomux, - GPIO0D0_MASK | GPIO0D1_MASK | - GPIO0D2_MASK | GPIO0D3_MASK, - GPIO0D0_GPIO << GPIO0D0_SHIFT | - GPIO0D1_GPIO << GPIO0D1_SHIFT | - GPIO0D2_UART4_SOUT << GPIO0D2_SHIFT | - GPIO0D3_UART4_SIN << GPIO0D3_SHIFT); - return 0; -} int board_init(void) { diff --git a/board/spear/x600/Kconfig b/board/spear/x600/Kconfig index 6a1c5c7b40..59f2b1ef56 100644 --- a/board/spear/x600/Kconfig +++ b/board/spear/x600/Kconfig @@ -1,5 +1,8 @@ if TARGET_X600 +config SPL_LDSCRIPT + default "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" + config SYS_BOARD default "x600" diff --git a/board/theobroma-systems/lion_rk3368/Kconfig b/board/theobroma-systems/lion_rk3368/Kconfig new file mode 100644 index 0000000000..d7aa487abd --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LION_RK3368 + +config SYS_BOARD + default "lion_rk3368" + +config SYS_VENDOR + default "theobroma-systems" + +config SYS_CONFIG_NAME + default "lion_rk3368" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + +endif diff --git a/board/theobroma-systems/lion_rk3368/MAINTAINERS b/board/theobroma-systems/lion_rk3368/MAINTAINERS new file mode 100644 index 0000000000..857f784d21 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/MAINTAINERS @@ -0,0 +1,10 @@ +LION-RK3368 (RK3368-uQ7 system-on-module) +M: Philipp Tomsich +M: Klaus Goger +S: Maintained +F: board/theobroma-systems/lion_rk3368 +F: include/configs/lion_rk3368.h +F: arch/arm/dts/rk3368-lion.dts +F: configs/lion-rk3368_defconfig +W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs +T: git git://git.theobroma-systems.com/lion-u-boot.git diff --git a/board/theobroma-systems/lion_rk3368/Makefile b/board/theobroma-systems/lion_rk3368/Makefile new file mode 100644 index 0000000000..f13a20b21e --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += lion_rk3368.o diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README new file mode 100644 index 0000000000..47304fcba6 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/README @@ -0,0 +1,60 @@ +Here is the step-by-step to boot to U-Boot on RK3368-uQ7 + +Get the Source and build ATF +============================ + + > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git + > cd arm-trusted-firmware + > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31 + > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin + +Configure U-Boot +================ + + > cd ../u-boot + > make lion-rk3368_defconfig + +Build the TPL/SPL stage +======================= + + > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm + > tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img + > cat spl/u-boot-spl-dtb.bin >> spl-3368.img + +Build the full U-Boot and a FIT image including the ATF +======================================================= + + > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb + +Write to a SD-card +================== + + > dd if=spl-3368.img of=/dev/sdb seek=64 + > dd if=u-boot.itb of=/dev/sdb seek=512 + + +If everything went according to plan, you should see the following +output on UART0: + + U-Boot TPL board init +Trying to boot from BOOTROM +Returning to boot ROM... +Trying to boot from MMC1 +NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443 +NOTICE: BL31: Built : 18:04:47, Jul 5 2017 + + +U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200) + +Model: Theobroma Systems RK3368-uQ7 SoM +DRAM: 2 GiB +MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 +Using default environment + +In: serial@ff180000 +Out: serial@ff180000 +Err: serial@ff180000 +Net: +Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e +eth0: ethernet@ff290000 +Hit any key to stop autoboot: 2 diff --git a/board/theobroma-systems/lion_rk3368/fit_spl_atf.its b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its new file mode 100644 index 0000000000..405750f351 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH + * + * Minimal dts for a SPL FIT image payload. + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +/dts-v1/; + +/ { + description = "FIT image with U-Boot proper, ATF bl31, DTB"; + #address-cells = <1>; + + images { + uboot { + description = "U-Boot (64-bit)"; + data = /incbin/("../../../u-boot-nodtb.bin"); + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <0x00200000>; + }; + atf { + description = "ARM Trusted Firmware"; + data = /incbin/("../../../bl31-rk3368.bin"); + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x00010000>; + entry = <0x00010000>; + }; + + fdt { + description = "RK3368-uQ7 (Lion) flat device-tree"; + data = /incbin/("../../../u-boot.dtb"); + type = "flat_dt"; + compression = "none"; + }; + }; + + configurations { + default = "conf"; + conf { + description = "Theobroma Systems RK3368-uQ7 (Puma) SoM"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt"; + }; + }; +}; diff --git a/board/theobroma-systems/lion_rk3368/lion_rk3368.c b/board/theobroma-systems/lion_rk3368/lion_rk3368.c new file mode 100644 index 0000000000..73b14883c3 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/lion_rk3368.c @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int mach_cpu_init(void) +{ + return 0; +} + +int board_init(void) +{ + return 0; +} diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README index 250e3459a3..214281a329 100644 --- a/board/theobroma-systems/puma_rk3399/README +++ b/board/theobroma-systems/puma_rk3399/README @@ -37,7 +37,7 @@ Compile the ATF > cd arm-trusted-firmware > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 - > cp build/rk3399/release/bl31.bin ../u-boot + > cp build/rk3399/release/bl31.bin ../u-boot/bl31-rk3399.bin Compile the M0 firmware ======================= diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its index f93c251927..520f846d66 100644 --- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its +++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its @@ -13,7 +13,7 @@ #address-cells = <1>; images { - uboot@1 { + uboot { description = "U-Boot (64-bit)"; data = /incbin/("../../../u-boot-nodtb.bin"); type = "standalone"; @@ -21,23 +21,23 @@ compression = "none"; load = <0x00200000>; }; - atf@1 { + atf { description = "ARM Trusted Firmware"; - data = /incbin/("../../../bl31.bin"); + data = /incbin/("../../../bl31-rk3399.bin"); type = "firmware"; arch = "arm64"; compression = "none"; load = <0x00001000>; entry = <0x00001000>; }; - pmu@1 { + pmu { description = "Cortex-M0 firmware"; data = /incbin/("../../../rk3399m0.bin"); type = "pmu-firmware"; compression = "none"; load = <0xff8c0000>; }; - fdt@1 { + fdt { description = "RK3399-Q7 (Puma) flat device-tree"; data = /incbin/("../../../u-boot.dtb"); type = "flat_dt"; @@ -46,12 +46,12 @@ }; configurations { - default = "conf@1"; - conf@1 { + default = "conf"; + conf { description = "Theobroma Systems RK3399-Q7 (Puma) SoM"; - firmware = "uboot@1"; - loadables = "atf@1"; - fdt = "fdt@1"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt"; }; }; }; diff --git a/common/Makefile b/common/Makefile index 60681c845c..3ee7a6b18b 100644 --- a/common/Makefile +++ b/common/Makefile @@ -53,7 +53,7 @@ obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o obj-$(CONFIG_CMD_BEDBUG) += bedbug.o -obj-$(CONFIG_$(SPL_)OF_LIBFDT) += fdt_support.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o obj-$(CONFIG_MII) += miiphyutil.o obj-$(CONFIG_CMD_MII) += miiphyutil.o @@ -96,7 +96,7 @@ obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o -obj-$(CONFIG_SPL_OF_LIBFDT) += fdt_support.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o ifdef CONFIG_SPL_USB_HOST_SUPPORT obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o obj-$(CONFIG_USB_STORAGE) += usb_storage.o @@ -146,10 +146,10 @@ endif endif obj-y += image.o obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o -obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o -obj-$(CONFIG_$(SPL_)FIT) += image-fit.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o +obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o obj-$(CONFIG_FIT_EMBED) += boot_fit.o common_fit.o -obj-$(CONFIG_$(SPL_)FIT_SIGNATURE) += image-sig.o +obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += image-sig.o obj-$(CONFIG_IO_TRACE) += iotrace.o obj-y += memsize.o obj-y += stdio.o diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 4de81392b0..5176857506 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -18,6 +18,16 @@ config SPL if SPL +config SPL_LDSCRIPT + string "Linker script for the SPL stage" + default "arch/$(ARCH)/cpu/u-boot-spl.lds" + depends on SPL + help + The SPL stage will usually require a different linker-script + (as it runs from a different memory region) than the regular + U-Boot stage. Set this to the path of the linker-script to + be used for SPL. + config SPL_BOARD_INIT bool "Call board-specific initialization in SPL" help @@ -25,6 +35,17 @@ config SPL_BOARD_INIT spl_board_init() from board_init_r(). This function should be provided by the board. +config SPL_BOOTROM_SUPPORT + bool "Support returning to the BOOTROM" + help + Some platforms (e.g. the Rockchip RK3368) provide support in their + ROM for loading the next boot-stage after performing basic setup + from the SPL stage. + + Enable this option, to return to the BOOTROM through the + BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the + boot device list, if not implemented for a given board) + config SPL_RAW_IMAGE_SUPPORT bool "Support SPL loading and booting of RAW images" default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT)) @@ -51,6 +72,15 @@ config SPL_SYS_MALLOC_SIMPLE this will make the SPL binary smaller at the cost of more heap usage as the *_simple malloc functions do not re-use free-ed mem. +config TPL_SYS_MALLOC_SIMPLE + bool + prompt "Only use malloc_simple functions in the TPL" + help + Say Y here to only use the *_simple malloc functions from + malloc_simple.c, rather then using the versions from dlmalloc.c; + this will make the TPL binary smaller at the cost of more heap + usage as the *_simple malloc functions do not re-use free-ed mem. + config SPL_STACK_R bool "Enable SDRAM location for SPL stack" help @@ -573,14 +603,6 @@ config SPL_SPI_SUPPORT enable SPI drivers that are needed for other purposes also, such as a SPI PMIC. -config SPL_TIMER_SUPPORT - bool "Support timer drivers" - help - Enable support for timer drivers in SPL. These can be used to get - a timer value when in SPL, or perhaps for implementing a delay - function. This enables the drivers in drivers/timer as part of an - SPL build. - config SPL_USB_HOST_SUPPORT bool "Support USB host drivers" help @@ -687,6 +709,74 @@ config TPL if TPL +config TPL_LDSCRIPT + string "Linker script for the TPL stage" + depends on TPL + help + The TPL stage will usually require a different linker-script + (as it runs from a different memory region) than the regular + U-Boot stage. Set this to the path of the linker-script to + be used for TPL. + + May be left empty to trigger the Makefile infrastructure to + fall back to the linker-script used for the SPL stage. + +config TPL_NEEDS_SEPARATE_TEXT_BASE + bool "TPL needs a separate text-base" + default n + depends on TPL + help + Enable, if the TPL stage should not inherit its text-base + from the SPL stage. When enabled, a base address for the + .text sections of the TPL stage has to be set below. + +config TPL_NEEDS_SEPARATE_STACK + bool "TPL needs a separate initial stack-pointer" + default n + depends on TPL + help + Enable, if the TPL stage should not inherit its initial + stack-pointer from the settings for the SPL stage. + +config TPL_TEXT_BASE + hex "Base address for the .text section of the TPL stage" + depends on TPL_NEEDS_SEPARATE_TEXT_BASE + help + The base address for the .text section of the TPL stage. + +config TPL_MAX_SIZE + int "Maximum size (in bytes) for the TPL stage" + default 0 + depends on TPL + help + The maximum size (in bytes) of the TPL stage. + +config TPL_STACK + hex "Address of the initial stack-pointer for the TPL stage" + depends on TPL_NEEDS_SEPARATE_STACK + help + The address of the initial stack-pointer for the TPL stage. + Usually this will be the (aligned) top-of-stack. + +config TPL_BOOTROM_SUPPORT + bool "Support returning to the BOOTROM (from TPL)" + help + Some platforms (e.g. the Rockchip RK3368) provide support in their + ROM for loading the next boot-stage after performing basic setup + from the TPL stage. + + Enable this option, to return to the BOOTROM through the + BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the + boot device list, if not implemented for a given board) + +config TPL_DRIVERS_MISC_SUPPORT + bool "Support misc drivers in TPL" + help + Enable miscellaneous drivers in TPL. These drivers perform various + tasks that don't fall nicely into other categories, Enable this + option to build the drivers in drivers/misc as part of an TPL + build, for those that support building in TPL (not all drivers do). + config TPL_ENV_SUPPORT bool "Support an environment" help @@ -695,7 +785,7 @@ config TPL_ENV_SUPPORT config TPL_I2C_SUPPORT bool "Support I2C" help - Enable support for the I2C bus in SPL. See SPL_I2C_SUPPORT for + Enable support for the I2C bus in TPL. See SPL_I2C_SUPPORT for details. config TPL_LIBCOMMON_SUPPORT @@ -725,24 +815,24 @@ config TPL_MMC_SUPPORT config TPL_NAND_SUPPORT bool "Support NAND flash" help - Enable support for NAND in SPL. See SPL_NAND_SUPPORT for details. + Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details. config TPL_SERIAL_SUPPORT bool "Support serial" help - Enable support for serial in SPL. See SPL_SERIAL_SUPPORT for + Enable support for serial in TPL. See SPL_SERIAL_SUPPORT for details. config TPL_SPI_FLASH_SUPPORT bool "Support SPI flash drivers" help - Enable support for using SPI flash in SPL. See SPL_SPI_FLASH_SUPPORT + Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT for details. config TPL_SPI_SUPPORT bool "Support SPI drivers" help - Enable support for using SPI in SPL. See SPL_SPI_SUPPORT for + Enable support for using SPI in TPL. See SPL_SPI_SUPPORT for details. endif # TPL diff --git a/common/spl/Makefile b/common/spl/Makefile index 47a64dd7d0..112b3e6022 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -10,23 +10,24 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o -obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o -obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o -obj-$(CONFIG_SPL_XIP_SUPPORT) += spl_xip.o -obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o +obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o +obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o +obj-$(CONFIG_$(SPL_TPL_)SPL_NOR_SUPPORT) += spl_nor.o +obj-$(CONFIG_$(SPL_TPL_)SPL_XIP_SUPPORT) += spl_xip.o +obj-$(CONFIG_$(SPL_TPL_)SPL_YMODEM_SUPPORT) += spl_ymodem.o ifndef CONFIG_SPL_UBI -obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o -obj-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o +obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += spl_nand.o +obj-$(CONFIG_$(SPL_TPL_)ONENAND_SUPPORT) += spl_onenand.o endif -obj-$(CONFIG_SPL_UBI) += spl_ubi.o -obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o -obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o -obj-$(CONFIG_SPL_ATF_SUPPORT) += spl_atf.o -obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o -obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o -obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o -obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o -obj-$(CONFIG_SPL_DFU_SUPPORT) += spl_dfu.o -obj-$(CONFIG_SPL_SPI_LOAD) += spl_spi.o -obj-$(CONFIG_SPL_RAM_SUPPORT) += spl_ram.o +obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o +obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o +obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o +obj-$(CONFIG_$(SPL_TPL_)ATF_SUPPORT) += spl_atf.o +obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o +obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o +obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o +obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o +obj-$(CONFIG_$(SPL_TPL_)DFU_SUPPORT) += spl_dfu.o +obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o +obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o endif diff --git a/common/spl/spl.c b/common/spl/spl.c index c56cc6f0ec..d245cfc0d1 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -6,6 +6,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include #include #include @@ -243,7 +244,7 @@ static int spl_common_init(bool setup_malloc) return ret; } } - if (IS_ENABLED(CONFIG_SPL_DM)) { + if (CONFIG_IS_ENABLED(DM)) { bootstage_start(BOOTSTATE_ID_ACCUM_DM_SPL, "dm_spl"); /* With CONFIG_SPL_OF_PLATDATA, bring in all devices */ ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA)); @@ -424,7 +425,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) gd->malloc_ptr / 1024); #endif - if (IS_ENABLED(CONFIG_SPL_ATF_SUPPORT)) { + if (CONFIG_IS_ENABLED(ATF_SUPPORT)) { debug("loaded - jumping to U-Boot via ATF BL31.\n"); bl31_entry(); } @@ -486,7 +487,7 @@ ulong spl_relocate_stack_gd(void) gd_t *new_gd; ulong ptr = CONFIG_SPL_STACK_R_ADDR; -#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_SPL_SYS_MALLOC_F_LEN +#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_VAL(SYS_MALLOC_F_LEN) if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; gd->malloc_base = ptr; diff --git a/common/spl/spl_bootrom.c b/common/spl/spl_bootrom.c new file mode 100644 index 0000000000..6804246d03 --- /dev/null +++ b/common/spl/spl_bootrom.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +__weak void board_return_to_bootrom(void) +{ +} + +static int spl_return_to_bootrom(struct spl_image_info *spl_image, + struct spl_boot_device *bootdev) +{ + /* + * If the board implements a way to return to its ROM (with + * the expectation that the next stage of will be booted by + * the ROM), it will implement board_return_to_bootrom() and + * should not return from it. + */ + board_return_to_bootrom(); + return false; +} + +SPL_LOAD_IMAGE_METHOD("BOOTROM", 0, BOOT_DEVICE_BOOTROM, spl_return_to_bootrom); diff --git a/configs/C29XPCIE_NAND_defconfig b/configs/C29XPCIE_NAND_defconfig index a4651dee06..316dbdab88 100644 --- a/configs/C29XPCIE_NAND_defconfig +++ b/configs/C29XPCIE_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -19,6 +18,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_EEPROM=y CONFIG_CMD_SF=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index be98bdce6e..db6259147c 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -18,9 +17,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index cf8acd6aa6..6f4fcda0be 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -17,9 +16,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index 23c76ec3c2..c051563d11 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -18,9 +17,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index ef3adbdd9e..99b2562a97 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -17,10 +16,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index decf3197da..97b77a26ca 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -20,6 +19,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index bb7c27c596..4f3a8f0cf7 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -19,6 +18,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index db7b8707cf..c2c0177107 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -19,6 +18,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1021RDB-PC_36BIT_NAND_defconfig b/configs/P1021RDB-PC_36BIT_NAND_defconfig index 4e62ac933a..fa68c788a8 100644 --- a/configs/P1021RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1021RDB-PC_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -20,6 +19,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1021RDB-PC_NAND_defconfig b/configs/P1021RDB-PC_NAND_defconfig index 3e1ed5214a..feaf1c4e64 100644 --- a/configs/P1021RDB-PC_NAND_defconfig +++ b/configs/P1021RDB-PC_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -19,6 +18,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig index a8c5d825fe..7e5358cfc7 100644 --- a/configs/P1022DS_36BIT_NAND_defconfig +++ b/configs/P1022DS_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y @@ -19,6 +18,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_REGINFO=y CONFIG_CMD_MMC=y diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig index 6ae4068881..90d9fc632a 100644 --- a/configs/P1022DS_NAND_defconfig +++ b/configs/P1022DS_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y @@ -19,6 +18,7 @@ CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_REGINFO=y CONFIG_CMD_MMC=y diff --git a/configs/P1024RDB_NAND_defconfig b/configs/P1024RDB_NAND_defconfig index 70fc4565d8..070de7d77f 100644 --- a/configs/P1024RDB_NAND_defconfig +++ b/configs/P1024RDB_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -19,6 +18,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P1025RDB_NAND_defconfig b/configs/P1025RDB_NAND_defconfig index 7fd641482b..a3e00de171 100644 --- a/configs/P1025RDB_NAND_defconfig +++ b/configs/P1025RDB_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -20,6 +19,7 @@ CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index dd1027e9d8..192e5102d7 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -21,6 +20,7 @@ CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index 9d94662cee..b9510975ed 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -19,6 +18,8 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index 34b9a56ee6..f01b98da4d 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -27,7 +27,7 @@ CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_PCI_SUPPORT=y CONFIG_SPL_PCH_SUPPORT=y CONFIG_SPL_RTC_SUPPORT=y -CONFIG_SPL_TIMER_SUPPORT=y +CONFIG_SPL_TIMER=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_defconfig index dae5094443..72e492faaa 100644 --- a/configs/evb-px5_defconfig +++ b/configs/evb-px5_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_ROCKCHIP_RK3368=y CONFIG_TARGET_EVB_PX5=y CONFIG_DEFAULT_DEVICE_TREE="rk3368-px5-evb" diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig index 8b9a288258..f4ad4c2c65 100644 --- a/configs/evb-rk3229_defconfig +++ b/configs/evb-rk3229_defconfig @@ -4,7 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x800 CONFIG_ROCKCHIP_RK322X=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_EVB_RK3229=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3229-evb" diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig index fa3884c922..88a70cdcc6 100644 --- a/configs/evb-rk3288_defconfig +++ b/configs/evb-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_EVB_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb" diff --git a/configs/fennec-rk3288_defconfig b/configs/fennec-rk3288_defconfig index 9d2b3199bc..2d68242841 100644 --- a/configs/fennec-rk3288_defconfig +++ b/configs/fennec-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_FENNEC_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-fennec" diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index 99a3f63b3e..b5408052ef 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_FIREFLY_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly" diff --git a/configs/geekbox_defconfig b/configs/geekbox_defconfig index a1944b4ccf..0fd89d23e4 100644 --- a/configs/geekbox_defconfig +++ b/configs/geekbox_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_ROCKCHIP_RK3368=y CONFIG_TARGET_GEEKBOX=y CONFIG_DEFAULT_DEVICE_TREE="rk3368-geekbox" diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig new file mode 100644 index 0000000000..407bd440ff --- /dev/null +++ b/configs/lion-rk3368_defconfig @@ -0,0 +1,95 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ROCKCHIP_RK3368=y +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 +CONFIG_TPL_LIBCOMMON_SUPPORT=y +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion" +CONFIG_SMBIOS_PRODUCT_NAME="sheep_rk3368" +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/lion_rk3368/fit_spl_atf.its" +CONFIG_ENV_IS_IN_MMC=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_SPL=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set +CONFIG_TPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_STACK_R=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 +CONFIG_SPL_ATF_SUPPORT=y +CONFIG_SPL_ATF_TEXT_BASE=0x10000 +CONFIG_TPL=y +CONFIG_TPL_BOOTROM_SUPPORT=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y +CONFIG_FASTBOOT=y +CONFIG_ANDROID_BOOT_IMAGE=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_MTDPARTS=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_TPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" +CONFIG_TPL_OF_PLATDATA=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_TPL_DM=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_TPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_TPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_TPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ9031=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_ROCKCHIP_RK3368=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_DEBUG_UART_BASE=0xFF180000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_TIMER=y +CONFIG_SPL_TIMER=y +CONFIG_TPL_TIMER=y +CONFIG_ROCKCHIP_TIMER=y +CONFIG_USE_TINY_PRINTF=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y +CONFIG_SMBIOS_MANUFACTURER="rockchip" diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index a7c796d062..3dd1872610 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_MIQI_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-miqi" diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig index 618d9839fd..d09c92f766 100644 --- a/configs/phycore-rk3288_defconfig +++ b/configs/phycore-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_PHYCORE_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-phycore-rdk" diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig index cfa2205e8c..f68f988c16 100644 --- a/configs/popmetal-rk3288_defconfig +++ b/configs/popmetal-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_POPMETAL_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal" diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 0c40788e3f..44a15368ce 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -26,7 +26,7 @@ CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_PCI_SUPPORT=y CONFIG_SPL_PCH_SUPPORT=y CONFIG_SPL_RTC_SUPPORT=y -CONFIG_SPL_TIMER_SUPPORT=y +CONFIG_SPL_TIMER=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig index cca855cfdf..570ff3153b 100644 --- a/configs/rock2_defconfig +++ b/configs/rock2_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_ROCK2=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock2-square" diff --git a/configs/rock_defconfig b/configs/rock_defconfig index 2ad6a6c521..eae284ca18 100644 --- a/configs/rock_defconfig +++ b/configs/rock_defconfig @@ -4,7 +4,8 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3188=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y +CONFIG_TPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_ROCK=y CONFIG_SPL_STACK_R_ADDR=0x60080000 CONFIG_DEFAULT_DEVICE_TREE="rk3188-radxarock" @@ -49,5 +50,6 @@ CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y CONFIG_SYSRESET=y CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y CONFIG_CMD_DHRYSTONE=y CONFIG_ERRNO_STR=y diff --git a/configs/sheep-rk3368_defconfig b/configs/sheep-rk3368_defconfig index be00fade7e..da6b93a28c 100644 --- a/configs/sheep-rk3368_defconfig +++ b/configs/sheep-rk3368_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_ROCKCHIP_RK3368=y CONFIG_DEFAULT_DEVICE_TREE="rk3368-sheep" CONFIG_DEBUG_UART=y diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index be937998e6..7dde8ab9f5 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_TINKER_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker" diff --git a/doc/README.rockchip b/doc/README.rockchip index dbeb8be6c0..12fec38139 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -130,7 +130,7 @@ load a second-level bootloader(ie. U-BOOT) as soon as it returns to bootrom. Therefore RK3288 has another loading sequence like RK3036. The option of U-Boot is controlled with this setting in U-Boot: - #define CONFIG_ROCKCHIP_SPL_BACK_TO_BROM + #define CONFIG_SPL_ROCKCHIP_BACK_TO_BROM You can create the image via the following operations: diff --git a/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt new file mode 100644 index 0000000000..8e7357d53d --- /dev/null +++ b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt @@ -0,0 +1,67 @@ +RK3368 dynamic memory controller driver +======================================= + +The RK3368 DMC (dynamic memory controller) driver supports setup/initialisation +during TPL using configuration data from the DTS (i.e. OF_PLATDATA), based on +the following key configuration data: + (a) a target-frequency (i.e. operating point) for the memory operation + (b) a speed-bin (as defined in JESD-79) for the DDR3 used in hardware + (c) a memory-schedule (i.e. mapping from physical addresses to the address + pins of the memory bus) + +Required properties +------------------- + +- compatible: "rockchip,rk3368-dmc" +- reg + protocol controller (PCTL) address and PHY controller (DDRPHY) address +- rockchip,ddr-speed-bin + the DDR3 device's speed-bin (as specified according to JESD-79) + DDR3_800D (5-5-5) + DDR3_800E (6-6-6) + DDR3_1066E (6-6-6) + DDR3_1066F (7-7-7) + DDR3_1066G (8-8-8) + DDR3_1333F (7-7-7) + DDR3_1333G (8-8-8) + DDR3_1333H (9-9-9) + DDR3_1333J (10-10-10) + DDR3_1600G (8-8-8) + DDR3_1600H (9-9-9) + DDR3_1600J (10-10-10) + DDR3_1600K (11-11-11) + DDR3_1866J (10-10-10) + DDR3_1866K (11-11-11) + DDR3_1866L (12-12-12) + DDR3_1866M (13-13-13) + DDR3_2133K (11-11-11) + DDR3_2133L (12-12-12) + DDR3_2133M (13-13-13) + DDR3_2133N (14-14-14) +- rockchip,ddr-frequency: + target DDR clock frequency in Hz (not all frequencies may be supported, + as there's some cooperation from the clock-driver required) +- rockchip,memory-schedule: + controls the decoding of physical addresses to DRAM addressing (i.e. how + the physical address maps onto the address pins/chip-select of the device) + DMC_MSCH_CBDR: column -> bank -> device -> row + DMC_MSCH_CBRD: column -> band -> row -> device + DMC_MSCH_CRBD: column -> row -> band -> device + +Example (for DDR3-1600K and 800MHz) +----------------------------------- + + #include + + dmc: dmc@ff610000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3368-dmc"; + reg = <0 0xff610000 0 0x400 + 0 0xff620000 0 0x400>; + }; + + &dmc { + rockchip,ddr-speed-bin = ; + rockchip,ddr-frequency = <800000000>; + rockchip,memory-schedule = ; + }; diff --git a/drivers/Makefile b/drivers/Makefile index 0cbfa5d07b..dab5c182c2 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -2,33 +2,35 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_$(SPL_TPL_)DM) += core/ -obj-$(CONFIG_$(SPL_)CLK) += clk/ -obj-$(CONFIG_$(SPL_)LED) += led/ -obj-$(CONFIG_$(SPL_)PHY) += phy/ -obj-$(CONFIG_$(SPL_)PINCTRL) += pinctrl/ -obj-$(CONFIG_$(SPL_)RAM) += ram/ +obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ +obj-$(CONFIG_$(SPL_TPL_)DM) += core/ +obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ +obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/ +obj-$(CONFIG_$(SPL_TPL_)LED) += led/ +obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/ +obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/ +obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ +obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ +obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ +obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/ +obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/ +obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/ +obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/ obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/ -obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/ obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/ -obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/ obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ -obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/ -obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ -obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ -obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/ obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/ -obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/ obj-$(CONFIG_SPL_UBI) += mtd/ubispl/ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ @@ -37,7 +39,6 @@ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/ obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/ -obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ @@ -49,18 +50,13 @@ obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/ obj-$(CONFIG_SPL_MMC_SUPPORT) += block/ obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/ + +endif endif ifdef CONFIG_TPL_BUILD -obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/ -obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ -obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/ obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ -obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/ -obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/ -obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/ -obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/ endif @@ -88,7 +84,6 @@ obj-y += scsi/ obj-y += sound/ obj-y += spmi/ obj-y += sysreset/ -obj-y += timer/ obj-y += tpm/ obj-y += video/ obj-y += watchdog/ diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 60bd706fa2..7765148876 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -12,7 +12,7 @@ config CLK config SPL_CLK bool "Enable clock support in SPL" - depends on CLK + depends on CLK && SPL_DM help The clock subsystem adds a small amount of overhead to the image. If this is acceptable and you have a need to use clock drivers in @@ -20,6 +20,16 @@ config SPL_CLK setting up clocks within SPL, and allows the same drivers to be used as U-Boot proper. +config TPL_CLK + bool "Enable clock support in TPL" + depends on CLK && TPL_DM + help + The clock subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use clock drivers in + SPL, enable this option. It might provide a cleaner interface to + setting up clocks within TPL, and allows the same drivers to be + used as U-Boot proper. + config CLK_BCM6345 bool "Clock controller driver for BCM6345" depends on CLK && ARCH_BMIPS diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 159f285f9a..b7735933be 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CLK) += clk-uclass.o clk_fixed_rate.o +obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o clk_fixed_rate.o obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_SANDBOX) += clk_sandbox.o obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o diff --git a/drivers/clk/rockchip/clk_rk3036.c b/drivers/clk/rockchip/clk_rk3036.c index 5ecf5129d8..83f4ae6ca3 100644 --- a/drivers/clk/rockchip/clk_rk3036.c +++ b/drivers/clk/rockchip/clk_rk3036.c @@ -235,7 +235,7 @@ static ulong rockchip_mmc_get_clk(struct rk3036_cru *cru, uint clk_general_rate, } src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate; - return DIV_TO_RATE(src_rate, div); + return DIV_TO_RATE(src_rate, div) / 2; } static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate, @@ -247,10 +247,11 @@ static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate, debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate); /* mmc clock auto divide 2 in internal */ - src_clk_div = (clk_general_rate / 2 + freq - 1) / freq; + src_clk_div = DIV_ROUND_UP(clk_general_rate / 2, freq); - if (src_clk_div > 0x7f) { - src_clk_div = (OSC_HZ / 2 + freq - 1) / freq; + if (src_clk_div > 128) { + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq); + assert(src_clk_div - 1 < 128); mux = EMMC_SEL_24M; } else { mux = EMMC_SEL_GPLL; diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c index 6f30332878..8c2c9bc1d8 100644 --- a/drivers/clk/rockchip/clk_rk3188.c +++ b/drivers/clk/rockchip/clk_rk3188.c @@ -71,9 +71,6 @@ enum { SOCSTS_GPLL_LOCK = 1 << 8, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _nr, _no) {\ @@ -287,7 +284,7 @@ static ulong rockchip_mmc_get_clk(struct rk3188_cru *cru, uint gclk_rate, return -EINVAL; } - return DIV_TO_RATE(gclk_rate, div); + return DIV_TO_RATE(gclk_rate, div) / 2; } static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate, @@ -296,7 +293,8 @@ static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate, int src_clk_div; debug("%s: gclk_rate=%u\n", __func__, gclk_rate); - src_clk_div = RATE_TO_DIV(gclk_rate, freq); + /* mmc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq) - 1; assert(src_clk_div <= 0x3f); switch (periph) { @@ -350,8 +348,9 @@ static ulong rockchip_spi_get_clk(struct rk3188_cru *cru, uint gclk_rate, static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate, int periph, uint freq) { - int src_clk_div = RATE_TO_DIV(gclk_rate, freq); + int src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1; + assert(src_clk_div < 128); switch (periph) { case SCLK_SPI0: assert(src_clk_div <= SPI0_DIV_MASK); @@ -400,8 +399,8 @@ static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf, * reparent aclk_cpu_pre from apll to gpll * set up dependent divisors for PCLK/HCLK and ACLK clocks. */ - aclk_div = RATE_TO_DIV(GPLL_HZ, CPU_ACLK_HZ); - assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); + aclk_div = DIV_ROUND_UP(GPLL_HZ, CPU_ACLK_HZ) - 1; + assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f); rk_clrsetreg(&cru->cru_clksel_con[0], CPU_ACLK_PLL_MASK << CPU_ACLK_PLL_SHIFT | diff --git a/drivers/clk/rockchip/clk_rk322x.c b/drivers/clk/rockchip/clk_rk322x.c index fdeb816e23..d7f6a3c313 100644 --- a/drivers/clk/rockchip/clk_rk322x.c +++ b/drivers/clk/rockchip/clk_rk322x.c @@ -26,9 +26,6 @@ enum { OUTPUT_MIN_HZ = 24 * 1000000, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ @@ -239,7 +236,7 @@ static ulong rockchip_mmc_get_clk(struct rk322x_cru *cru, uint clk_general_rate, } src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate; - return DIV_TO_RATE(src_rate, div); + return DIV_TO_RATE(src_rate, div) / 2; } static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate, @@ -250,11 +247,12 @@ static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate, debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate); - /* mmc clock auto divide 2 in internal */ - src_clk_div = (clk_general_rate / 2 + freq - 1) / freq; + /* mmc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(clk_general_rate / 2, freq); - if (src_clk_div > 0x7f) { - src_clk_div = (OSC_HZ / 2 + freq - 1) / freq; + if (src_clk_div > 128) { + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq); + assert(src_clk_div - 1 < 128); mux = EMMC_SEL_24M; } else { mux = EMMC_SEL_GPLL; diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index 792ee76509..478195b10b 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -118,9 +118,6 @@ enum { SOCSTS_NPLL_LOCK = 1 << 9, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _nr, _no) {\ @@ -530,10 +527,12 @@ static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate, int mux; debug("%s: gclk_rate=%u\n", __func__, gclk_rate); - src_clk_div = RATE_TO_DIV(gclk_rate, freq); + /* mmc clock default div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq); if (src_clk_div > 0x3f) { - src_clk_div = RATE_TO_DIV(OSC_HZ, freq); + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq); + assert(src_clk_div < 0x40); mux = EMMC_PLL_SELECT_24MHZ; assert((int)EMMC_PLL_SELECT_24MHZ == (int)MMC0_PLL_SELECT_24MHZ); @@ -607,7 +606,8 @@ static ulong rockchip_spi_set_clk(struct rk3288_cru *cru, uint gclk_rate, int src_clk_div; debug("%s: clk_general_rate=%u\n", __func__, gclk_rate); - src_clk_div = RATE_TO_DIV(gclk_rate, freq); + src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1; + assert(src_clk_div < 128); switch (periph) { case SCLK_SPI0: rk_clrsetreg(&cru->cru_clksel_con[25], diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c index 2065a8a65b..c3a6650de0 100644 --- a/drivers/clk/rockchip/clk_rk3328.c +++ b/drivers/clk/rockchip/clk_rk3328.c @@ -412,9 +412,9 @@ static ulong rk3328_mmc_get_clk(struct rk3328_cru *cru, uint clk_id) if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT == CLK_EMMC_PLL_SEL_24M) - return DIV_TO_RATE(OSC_HZ, div); + return DIV_TO_RATE(OSC_HZ, div) / 2; else - return DIV_TO_RATE(GPLL_HZ, div); + return DIV_TO_RATE(GPLL_HZ, div) / 2; } static ulong rk3328_mmc_set_clk(struct rk3328_cru *cru, @@ -436,11 +436,12 @@ static ulong rk3328_mmc_set_clk(struct rk3328_cru *cru, return -EINVAL; } /* Select clk_sdmmc/emmc source from GPLL by default */ - src_clk_div = GPLL_HZ / set_rate; + /* mmc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate); if (src_clk_div > 127) { /* use 24MHz source for 400KHz clock */ - src_clk_div = OSC_HZ / set_rate; + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate); rk_clrsetreg(&cru->clksel_con[con_id], CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT | diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c index e1d9aeb8e5..2be1f572d7 100644 --- a/drivers/clk/rockchip/clk_rk3368.c +++ b/drivers/clk/rockchip/clk_rk3368.c @@ -1,13 +1,16 @@ /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd * Author: Andy Yan + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * SPDX-License-Identifier: GPL-2.0 */ #include #include #include +#include #include +#include #include #include #include @@ -18,6 +21,12 @@ DECLARE_GLOBAL_DATA_PTR; +#if CONFIG_IS_ENABLED(OF_PLATDATA) +struct rk3368_clk_plat { + struct dtd_rockchip_rk3368_cru dtd; +}; +#endif + struct pll_div { u32 nr; u32 nf; @@ -30,9 +39,6 @@ struct pll_div { #define GPLL_HZ (576 * 1000 * 1000) #define CPLL_HZ (400 * 1000 * 1000) -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _nr, _no) { \ @@ -41,10 +47,16 @@ struct pll_div { (_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \ "divisors on line " __stringify(__LINE__)); +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2); static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2); +#if !defined(CONFIG_TPL_BUILD) static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 1, 2); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 6); +#endif +#endif + +static ulong rk3368_clk_get_rate(struct clk *clk); /* Get pll rate by id */ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, @@ -73,8 +85,9 @@ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, } } +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, - const struct pll_div *div, bool has_bwadj) + const struct pll_div *div) { struct rk3368_pll *pll = &cru->pll[pll_id]; /* All PLLs have same VCO and output frequency range restrictions*/ @@ -92,6 +105,12 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, ((div->nr - 1) << PLL_NR_SHIFT) | ((div->no - 1) << PLL_OD_SHIFT)); writel((div->nf - 1) << PLL_NF_SHIFT, &pll->con1); + /* + * BWADJ should be set to NF / 2 to ensure the nominal bandwidth. + * Compare the RK3368 TRM, section "3.6.4 PLL Bandwidth Adjustment". + */ + clrsetbits_le32(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1); + udelay(10); /* return from reset */ @@ -106,15 +125,23 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, return 0; } +#endif +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static void rkclk_init(struct rk3368_cru *cru) { u32 apllb, aplll, dpll, cpll, gpll; - rkclk_set_pll(cru, APLLB, &apll_b_init_cfg, false); - rkclk_set_pll(cru, APLLL, &apll_l_init_cfg, false); - rkclk_set_pll(cru, GPLL, &gpll_init_cfg, false); - rkclk_set_pll(cru, CPLL, &cpll_init_cfg, false); + rkclk_set_pll(cru, APLLB, &apll_b_init_cfg); + rkclk_set_pll(cru, APLLL, &apll_l_init_cfg); +#if !defined(CONFIG_TPL_BUILD) + /* + * If we plan to return to the boot ROM, we can't increase the + * GPLL rate from the SPL stage. + */ + rkclk_set_pll(cru, GPLL, &gpll_init_cfg); + rkclk_set_pll(cru, CPLL, &cpll_init_cfg); +#endif apllb = rkclk_pll_get_rate(cru, APLLB); aplll = rkclk_pll_get_rate(cru, APLLL); @@ -125,17 +152,19 @@ static void rkclk_init(struct rk3368_cru *cru) debug("%s apllb(%d) apll(%d) dpll(%d) cpll(%d) gpll(%d)\n", __func__, apllb, aplll, dpll, cpll, gpll); } +#endif +#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT) static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) { u32 div, con, con_id, rate; u32 pll_rate; switch (clk_id) { - case SCLK_SDMMC: + case HCLK_SDMMC: con_id = 50; break; - case SCLK_EMMC: + case HCLK_EMMC: con_id = 51; break; case SCLK_SDIO0: @@ -146,7 +175,7 @@ static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) } con = readl(&cru->clksel_con[con_id]); - switch ((con & MMC_PLL_SEL_MASK) >> MMC_PLL_SEL_SHIFT) { + switch (con & MMC_PLL_SEL_MASK) { case MMC_PLL_SEL_GPLL: pll_rate = rkclk_pll_get_rate(cru, GPLL); break; @@ -154,6 +183,8 @@ static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) pll_rate = OSC_HZ; break; case MMC_PLL_SEL_CPLL: + pll_rate = rkclk_pll_get_rate(cru, CPLL); + break; case MMC_PLL_SEL_USBPHY_480M: default: return -EINVAL; @@ -161,23 +192,76 @@ static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) div = (con & MMC_CLK_DIV_MASK) >> MMC_CLK_DIV_SHIFT; rate = DIV_TO_RATE(pll_rate, div); + debug("%s: raw rate %d (post-divide by 2)\n", __func__, rate); return rate >> 1; } -static ulong rk3368_mmc_set_clk(struct rk3368_cru *cru, - ulong clk_id, ulong rate) +static ulong rk3368_mmc_find_best_rate_and_parent(struct clk *clk, + ulong rate, + u32 *best_mux, + u32 *best_div) +{ + int i; + ulong best_rate = 0; + const ulong MHz = 1000000; + const struct { + u32 mux; + ulong rate; + } parents[] = { + { .mux = MMC_PLL_SEL_CPLL, .rate = CPLL_HZ }, + { .mux = MMC_PLL_SEL_GPLL, .rate = GPLL_HZ }, + { .mux = MMC_PLL_SEL_24M, .rate = 24 * MHz } + }; + + debug("%s: target rate %ld\n", __func__, rate); + for (i = 0; i < ARRAY_SIZE(parents); ++i) { + /* + * Find the largest rate no larger than the target-rate for + * the current parent. + */ + ulong parent_rate = parents[i].rate; + u32 div = DIV_ROUND_UP(parent_rate, rate); + u32 adj_div = div; + ulong new_rate = parent_rate / adj_div; + + debug("%s: rate %ld, parent-mux %d, parent-rate %ld, div %d\n", + __func__, rate, parents[i].mux, parents[i].rate, div); + + /* Skip, if not representable */ + if ((div - 1) > MMC_CLK_DIV_MASK) + continue; + + /* Skip, if we already have a better (or equal) solution */ + if (new_rate <= best_rate) + continue; + + /* This is our new best rate. */ + best_rate = new_rate; + *best_mux = parents[i].mux; + *best_div = div - 1; + } + + debug("%s: best_mux = %x, best_div = %d, best_rate = %ld\n", + __func__, *best_mux, *best_div, best_rate); + + return best_rate; +} + +static ulong rk3368_mmc_set_clk(struct clk *clk, ulong rate) { - u32 div; - u32 con_id; - u32 gpll_rate = rkclk_pll_get_rate(cru, GPLL); + struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); + struct rk3368_cru *cru = priv->cru; + ulong clk_id = clk->id; + u32 con_id, mux = 0, div = 0; - div = RATE_TO_DIV(gpll_rate, rate << 1); + /* Find the best parent and rate */ + rk3368_mmc_find_best_rate_and_parent(clk, rate << 1, &mux, &div); switch (clk_id) { - case SCLK_SDMMC: + case HCLK_SDMMC: con_id = 50; break; - case SCLK_EMMC: + case HCLK_EMMC: con_id = 51; break; case SCLK_SDIO0: @@ -187,33 +271,154 @@ static ulong rk3368_mmc_set_clk(struct rk3368_cru *cru, return -EINVAL; } - if (div > 0x3f) { - div = RATE_TO_DIV(OSC_HZ, rate); - rk_clrsetreg(&cru->clksel_con[con_id], - MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK, - (MMC_PLL_SEL_24M << MMC_PLL_SEL_SHIFT) | - (div << MMC_CLK_DIV_SHIFT)); - } else { - rk_clrsetreg(&cru->clksel_con[con_id], - MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK, - (MMC_PLL_SEL_GPLL << MMC_PLL_SEL_SHIFT) | - div << MMC_CLK_DIV_SHIFT); - } + rk_clrsetreg(&cru->clksel_con[con_id], + MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK, + mux | div); return rk3368_mmc_get_clk(cru, clk_id); } +#endif + +#if IS_ENABLED(CONFIG_TPL_BUILD) +static ulong rk3368_ddr_set_clk(struct rk3368_cru *cru, ulong set_rate) +{ + const struct pll_div *dpll_cfg = NULL; + const ulong MHz = 1000000; + + /* Fout = ((Fin /NR) * NF )/ NO */ + static const struct pll_div dpll_1200 = PLL_DIVISORS(1200 * MHz, 1, 1); + static const struct pll_div dpll_1332 = PLL_DIVISORS(1332 * MHz, 2, 1); + static const struct pll_div dpll_1600 = PLL_DIVISORS(1600 * MHz, 3, 2); + + switch (set_rate) { + case 1200*MHz: + dpll_cfg = &dpll_1200; + break; + case 1332*MHz: + dpll_cfg = &dpll_1332; + break; + case 1600*MHz: + dpll_cfg = &dpll_1600; + break; + default: + error("Unsupported SDRAM frequency!,%ld\n", set_rate); + } + rkclk_set_pll(cru, DPLL, dpll_cfg); + + return set_rate; +} +#endif + +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) +static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru, + ulong clk_id, ulong set_rate) +{ + /* + * This models the 'assigned-clock-parents = <&ext_gmac>' from + * the DTS and switches to the 'ext_gmac' clock parent. + */ + rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK); + return set_rate; +} +#endif + +/* + * RK3368 SPI clocks have a common divider-width (7 bits) and a single bit + * to select either CPLL or GPLL as the clock-parent. The location within + * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable. + */ + +struct spi_clkreg { + uint8_t reg; /* CLKSEL_CON[reg] register in CRU */ + uint8_t div_shift; + uint8_t sel_shift; +}; + +/* + * The entries are numbered relative to their offset from SCLK_SPI0. + */ +static const struct spi_clkreg spi_clkregs[] = { + [0] = { .reg = 45, .div_shift = 0, .sel_shift = 7, }, + [1] = { .reg = 45, .div_shift = 8, .sel_shift = 15, }, + [2] = { .reg = 46, .div_shift = 8, .sel_shift = 15, }, +}; + +static inline u32 extract_bits(u32 val, unsigned width, unsigned shift) +{ + return (val >> shift) & ((1 << width) - 1); +} + +static ulong rk3368_spi_get_clk(struct rk3368_cru *cru, ulong clk_id) +{ + const struct spi_clkreg *spiclk = NULL; + u32 div, val; + + switch (clk_id) { + case SCLK_SPI0 ... SCLK_SPI2: + spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; + break; + + default: + error("%s: SPI clk-id %ld not supported\n", __func__, clk_id); + return -EINVAL; + } + + val = readl(&cru->clksel_con[spiclk->reg]); + div = extract_bits(val, 7, spiclk->div_shift); + + debug("%s: div 0x%x\n", __func__, div); + return DIV_TO_RATE(GPLL_HZ, div); +} + +static ulong rk3368_spi_set_clk(struct rk3368_cru *cru, ulong clk_id, uint hz) +{ + const struct spi_clkreg *spiclk = NULL; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz); + assert(src_clk_div < 127); + + switch (clk_id) { + case SCLK_SPI0 ... SCLK_SPI2: + spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; + break; + + default: + error("%s: SPI clk-id %ld not supported\n", __func__, clk_id); + return -EINVAL; + } + + rk_clrsetreg(&cru->clksel_con[spiclk->reg], + ((0x7f << spiclk->div_shift) | + (0x1 << spiclk->sel_shift)), + ((src_clk_div << spiclk->div_shift) | + (1 << spiclk->sel_shift))); + + return rk3368_spi_get_clk(cru, clk_id); +} static ulong rk3368_clk_get_rate(struct clk *clk) { struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); ulong rate = 0; - debug("%s id:%ld\n", __func__, clk->id); + debug("%s: id %ld\n", __func__, clk->id); switch (clk->id) { + case PLL_CPLL: + rate = rkclk_pll_get_rate(priv->cru, CPLL); + break; + case PLL_GPLL: + rate = rkclk_pll_get_rate(priv->cru, GPLL); + break; + case SCLK_SPI0 ... SCLK_SPI2: + rate = rk3368_spi_get_clk(priv->cru, clk->id); + break; +#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT) case HCLK_SDMMC: case HCLK_EMMC: rate = rk3368_mmc_get_clk(priv->cru, clk->id); break; +#endif default: return -ENOENT; } @@ -223,15 +428,31 @@ static ulong rk3368_clk_get_rate(struct clk *clk) static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate) { - struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); + __maybe_unused struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); ulong ret = 0; debug("%s id:%ld rate:%ld\n", __func__, clk->id, rate); switch (clk->id) { - case SCLK_SDMMC: - case SCLK_EMMC: - ret = rk3368_mmc_set_clk(priv->cru, clk->id, rate); + case SCLK_SPI0 ... SCLK_SPI2: + ret = rk3368_spi_set_clk(priv->cru, clk->id, rate); break; +#if IS_ENABLED(CONFIG_TPL_BUILD) + case CLK_DDR: + ret = rk3368_ddr_set_clk(priv->cru, rate); + break; +#endif +#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT) + case HCLK_SDMMC: + case HCLK_EMMC: + ret = rk3368_mmc_set_clk(clk, rate); + break; +#endif +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) + case SCLK_MAC: + /* select the external clock */ + ret = rk3368_gmac_set_clk(priv->cru, clk->id, rate); + break; +#endif default: return -ENOENT; } @@ -246,18 +467,26 @@ static struct clk_ops rk3368_clk_ops = { static int rk3368_clk_probe(struct udevice *dev) { - struct rk3368_clk_priv *priv = dev_get_priv(dev); + struct rk3368_clk_priv __maybe_unused *priv = dev_get_priv(dev); +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct rk3368_clk_plat *plat = dev_get_platdata(dev); + priv->cru = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]); +#endif +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) rkclk_init(priv->cru); +#endif return 0; } static int rk3368_clk_ofdata_to_platdata(struct udevice *dev) { +#if !CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3368_clk_priv *priv = dev_get_priv(dev); priv->cru = (struct rk3368_cru *)devfdt_get_addr(dev); +#endif return 0; } @@ -284,6 +513,9 @@ U_BOOT_DRIVER(rockchip_rk3368_cru) = { .id = UCLASS_CLK, .of_match = rk3368_clk_ids, .priv_auto_alloc_size = sizeof(struct rk3368_clk_priv), +#if CONFIG_IS_ENABLED(OF_PLATDATA) + .platdata_auto_alloc_size = sizeof(struct rk3368_clk_plat), +#endif .ofdata_to_platdata = rk3368_clk_ofdata_to_platdata, .ops = &rk3368_clk_ops, .bind = rk3368_clk_bind, diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 53d2a3f85d..3edafea140 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -676,8 +676,8 @@ static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz) const struct spi_clkreg *spiclk = NULL; int src_clk_div; - src_clk_div = RATE_TO_DIV(GPLL_HZ, hz); - assert(src_clk_div < 127); + src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1; + assert(src_clk_div < 128); switch (clk_id) { case SCLK_SPI1 ... SCLK_SPI5: @@ -750,18 +750,21 @@ static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id) case HCLK_SDMMC: case SCLK_SDMMC: con = readl(&cru->clksel_con[16]); + /* dwmmc controller have internal div 2 */ + div = 2; break; case SCLK_EMMC: con = readl(&cru->clksel_con[21]); + div = 1; break; default: return -EINVAL; } - div = (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT; + div *= (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT; if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT == CLK_EMMC_PLL_SEL_24M) - return DIV_TO_RATE(24*1000*1000, div); + return DIV_TO_RATE(OSC_HZ, div); else return DIV_TO_RATE(GPLL_HZ, div); } @@ -776,11 +779,13 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, case HCLK_SDMMC: case SCLK_SDMMC: /* Select clk_sdmmc source from GPLL by default */ - src_clk_div = GPLL_HZ / set_rate; + /* mmc clock defaulg div 2 internal, provide double in cru */ + src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate); - if (src_clk_div > 127) { + if (src_clk_div > 128) { /* use 24MHz source for 400KHz clock */ - src_clk_div = 24*1000*1000 / set_rate; + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate); + assert(src_clk_div - 1 < 128); rk_clrsetreg(&cru->clksel_con[16], CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT | @@ -794,8 +799,8 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, break; case SCLK_EMMC: /* Select aclk_emmc source from GPLL */ - src_clk_div = GPLL_HZ / aclk_emmc; - assert(src_clk_div - 1 < 31); + src_clk_div = DIV_ROUND_UP(GPLL_HZ , aclk_emmc); + assert(src_clk_div - 1 < 32); rk_clrsetreg(&cru->clksel_con[21], ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK, @@ -803,8 +808,8 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, (src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT); /* Select clk_emmc source from GPLL too */ - src_clk_div = GPLL_HZ / set_rate; - assert(src_clk_div - 1 < 127); + src_clk_div = DIV_ROUND_UP(GPLL_HZ, set_rate); + assert(src_clk_div - 1 < 128); rk_clrsetreg(&cru->clksel_con[22], CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, diff --git a/drivers/clk/rockchip/clk_rv1108.c b/drivers/clk/rockchip/clk_rv1108.c index 818293dfe8..cf966bbdc3 100644 --- a/drivers/clk/rockchip/clk_rv1108.c +++ b/drivers/clk/rockchip/clk_rv1108.c @@ -25,9 +25,6 @@ enum { OUTPUT_MIN_HZ = 24 * 1000000, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index f8b19a48cc..7afef1f9a3 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -97,7 +97,17 @@ config REGMAP config SPL_REGMAP bool "Support register maps in SPL" - depends on DM + depends on SPL_DM + help + Hardware peripherals tend to have one or more sets of registers + which can be accessed to control the hardware. A register map + models this with a simple read/write interface. It can in principle + support any bus type (I2C, SPI) but so far this only supports + direct memory access. + +config TPL_REGMAP + bool "Support register maps in TPL" + depends on TPL_DM help Hardware peripherals tend to have one or more sets of registers which can be accessed to control the hardware. A register map @@ -116,7 +126,16 @@ config SYSCON config SPL_SYSCON bool "Support system controllers in SPL" - depends on REGMAP + depends on SPL_REGMAP + help + Many SoCs have a number of system controllers which are dealt with + as a group by a single driver. Some common functionality is provided + by this uclass, including accessing registers via regmap and + assigning a unique number to each. + +config TPL_SYSCON + bool "Support system controllers in TPL" + depends on TPL_REGMAP help Many SoCs have a number of system controllers which are dealt with as a group by a single driver. Some common functionality is provided diff --git a/drivers/core/Makefile b/drivers/core/Makefile index fd2d4de0c8..3d68c70b57 100644 --- a/drivers/core/Makefile +++ b/drivers/core/Makefile @@ -9,8 +9,8 @@ obj-$(CONFIG_DEVRES) += devres.o obj-$(CONFIG_$(SPL_)DM_DEVICE_REMOVE) += device-remove.o obj-$(CONFIG_$(SPL_)SIMPLE_BUS) += simple-bus.o obj-$(CONFIG_DM) += dump.o -obj-$(CONFIG_$(SPL_)REGMAP) += regmap.o -obj-$(CONFIG_$(SPL_)SYSCON) += syscon-uclass.o +obj-$(CONFIG_$(SPL_TPL_)REGMAP) += regmap.o +obj-$(CONFIG_$(SPL_TPL_)SYSCON) += syscon-uclass.o obj-$(CONFIG_OF_LIVE) += of_access.o of_addr.o ifndef CONFIG_DM_DEV_READ_INLINE obj-$(CONFIG_OF_CONTROL) += read.o diff --git a/drivers/net/gmac_rockchip.c b/drivers/net/gmac_rockchip.c index c9f9e839ba..586ccbff0a 100644 --- a/drivers/net/gmac_rockchip.c +++ b/drivers/net/gmac_rockchip.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -83,6 +84,38 @@ static int rk3288_gmac_fix_mac_speed(struct dw_eth_dev *priv) return 0; } +static int rk3368_gmac_fix_mac_speed(struct dw_eth_dev *priv) +{ + struct rk3368_grf *grf; + int clk; + enum { + RK3368_GMAC_CLK_SEL_2_5M = 2 << 4, + RK3368_GMAC_CLK_SEL_25M = 3 << 4, + RK3368_GMAC_CLK_SEL_125M = 0 << 4, + RK3368_GMAC_CLK_SEL_MASK = GENMASK(5, 4), + }; + + switch (priv->phydev->speed) { + case 10: + clk = RK3368_GMAC_CLK_SEL_2_5M; + break; + case 100: + clk = RK3368_GMAC_CLK_SEL_25M; + break; + case 1000: + clk = RK3368_GMAC_CLK_SEL_125M; + break; + default: + debug("Unknown phy speed: %d\n", priv->phydev->speed); + return -EINVAL; + } + + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + rk_clrsetreg(&grf->soc_con15, RK3368_GMAC_CLK_SEL_MASK, clk); + + return 0; +} + static int rk3399_gmac_fix_mac_speed(struct dw_eth_dev *priv) { struct rk3399_grf_regs *grf; @@ -129,6 +162,44 @@ static void rk3288_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) pdata->tx_delay << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT); } +static void rk3368_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) +{ + struct rk3368_grf *grf; + enum { + RK3368_GMAC_PHY_INTF_SEL_RGMII = 1 << 9, + RK3368_GMAC_PHY_INTF_SEL_MASK = GENMASK(11, 9), + RK3368_RMII_MODE_MASK = BIT(6), + RK3368_RMII_MODE = BIT(6), + }; + enum { + RK3368_RXCLK_DLY_ENA_GMAC_MASK = BIT(15), + RK3368_RXCLK_DLY_ENA_GMAC_DISABLE = 0, + RK3368_RXCLK_DLY_ENA_GMAC_ENABLE = BIT(15), + RK3368_TXCLK_DLY_ENA_GMAC_MASK = BIT(7), + RK3368_TXCLK_DLY_ENA_GMAC_DISABLE = 0, + RK3368_TXCLK_DLY_ENA_GMAC_ENABLE = BIT(7), + RK3368_CLK_RX_DL_CFG_GMAC_SHIFT = 8, + RK3368_CLK_RX_DL_CFG_GMAC_MASK = GENMASK(14, 8), + RK3368_CLK_TX_DL_CFG_GMAC_SHIFT = 0, + RK3368_CLK_TX_DL_CFG_GMAC_MASK = GENMASK(6, 0), + }; + + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + rk_clrsetreg(&grf->soc_con15, + RK3368_RMII_MODE_MASK | RK3368_GMAC_PHY_INTF_SEL_MASK, + RK3368_GMAC_PHY_INTF_SEL_RGMII); + + rk_clrsetreg(&grf->soc_con16, + RK3368_RXCLK_DLY_ENA_GMAC_MASK | + RK3368_TXCLK_DLY_ENA_GMAC_MASK | + RK3368_CLK_RX_DL_CFG_GMAC_MASK | + RK3368_CLK_TX_DL_CFG_GMAC_MASK, + RK3368_RXCLK_DLY_ENA_GMAC_ENABLE | + RK3368_TXCLK_DLY_ENA_GMAC_ENABLE | + pdata->rx_delay << RK3368_CLK_RX_DL_CFG_GMAC_SHIFT | + pdata->tx_delay << RK3368_CLK_TX_DL_CFG_GMAC_SHIFT); +} + static void rk3399_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) { struct rk3399_grf_regs *grf; @@ -208,6 +279,11 @@ const struct rk_gmac_ops rk3288_gmac_ops = { .set_to_rgmii = rk3288_gmac_set_to_rgmii, }; +const struct rk_gmac_ops rk3368_gmac_ops = { + .fix_mac_speed = rk3368_gmac_fix_mac_speed, + .set_to_rgmii = rk3368_gmac_set_to_rgmii, +}; + const struct rk_gmac_ops rk3399_gmac_ops = { .fix_mac_speed = rk3399_gmac_fix_mac_speed, .set_to_rgmii = rk3399_gmac_set_to_rgmii, @@ -216,6 +292,8 @@ const struct rk_gmac_ops rk3399_gmac_ops = { static const struct udevice_id rockchip_gmac_ids[] = { { .compatible = "rockchip,rk3288-gmac", .data = (ulong)&rk3288_gmac_ops }, + { .compatible = "rockchip,rk3368-gmac", + .data = (ulong)&rk3368_gmac_ops }, { .compatible = "rockchip,rk3399-gmac", .data = (ulong)&rk3399_gmac_ops }, { } diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3368.c b/drivers/pinctrl/rockchip/pinctrl_rk3368.c index bdf0758c0c..81ce2e31a7 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3368.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3368.c @@ -1,8 +1,11 @@ /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd * Author: Andy Yan + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * * SPDX-License-Identifier: GPL-2.0+ */ + #include #include #include @@ -16,6 +19,428 @@ DECLARE_GLOBAL_DATA_PTR; +/* PMUGRF_GPIO0B_IOMUX */ +enum { + GPIO0B5_SHIFT = 10, + GPIO0B5_MASK = GENMASK(GPIO0B5_SHIFT + 1, GPIO0B5_SHIFT), + GPIO0B5_GPIO = 0, + GPIO0B5_SPI2_CSN0 = (2 << GPIO0B5_SHIFT), + + GPIO0B4_SHIFT = 8, + GPIO0B4_MASK = GENMASK(GPIO0B4_SHIFT + 1, GPIO0B4_SHIFT), + GPIO0B4_GPIO = 0, + GPIO0B4_SPI2_CLK = (2 << GPIO0B4_SHIFT), + + GPIO0B3_SHIFT = 6, + GPIO0B3_MASK = GENMASK(GPIO0B3_SHIFT + 1, GPIO0B3_SHIFT), + GPIO0B3_GPIO = 0, + GPIO0B3_SPI2_TXD = (2 << GPIO0B3_SHIFT), + + GPIO0B2_SHIFT = 4, + GPIO0B2_MASK = GENMASK(GPIO0B2_SHIFT + 1, GPIO0B2_SHIFT), + GPIO0B2_GPIO = 0, + GPIO0B2_SPI2_RXD = (2 << GPIO0B2_SHIFT), +}; + +/*GRF_GPIO0C_IOMUX*/ +enum { + GPIO0C7_SHIFT = 14, + GPIO0C7_MASK = GENMASK(GPIO0C7_SHIFT + 1, GPIO0C7_SHIFT), + GPIO0C7_GPIO = 0, + GPIO0C7_LCDC_D19 = (1 << GPIO0C7_SHIFT), + GPIO0C7_TRACE_D9 = (2 << GPIO0C7_SHIFT), + GPIO0C7_UART1_RTSN = (3 << GPIO0C7_SHIFT), + + GPIO0C6_SHIFT = 12, + GPIO0C6_MASK = GENMASK(GPIO0C6_SHIFT + 1, GPIO0C6_SHIFT), + GPIO0C6_GPIO = 0, + GPIO0C6_LCDC_D18 = (1 << GPIO0C6_SHIFT), + GPIO0C6_TRACE_D8 = (2 << GPIO0C6_SHIFT), + GPIO0C6_UART1_CTSN = (3 << GPIO0C6_SHIFT), + + GPIO0C5_SHIFT = 10, + GPIO0C5_MASK = GENMASK(GPIO0C5_SHIFT + 1, GPIO0C5_SHIFT), + GPIO0C5_GPIO = 0, + GPIO0C5_LCDC_D17 = (1 << GPIO0C5_SHIFT), + GPIO0C5_TRACE_D7 = (2 << GPIO0C5_SHIFT), + GPIO0C5_UART1_SOUT = (3 << GPIO0C5_SHIFT), + + GPIO0C4_SHIFT = 8, + GPIO0C4_MASK = GENMASK(GPIO0C4_SHIFT + 1, GPIO0C4_SHIFT), + GPIO0C4_GPIO = 0, + GPIO0C4_LCDC_D16 = (1 << GPIO0C4_SHIFT), + GPIO0C4_TRACE_D6 = (2 << GPIO0C4_SHIFT), + GPIO0C4_UART1_SIN = (3 << GPIO0C4_SHIFT), + + GPIO0C3_SHIFT = 6, + GPIO0C3_MASK = GENMASK(GPIO0C3_SHIFT + 1, GPIO0C3_SHIFT), + GPIO0C3_GPIO = 0, + GPIO0C3_LCDC_D15 = (1 << GPIO0C3_SHIFT), + GPIO0C3_TRACE_D5 = (2 << GPIO0C3_SHIFT), + GPIO0C3_MCU_JTAG_TDO = (3 << GPIO0C3_SHIFT), + + GPIO0C2_SHIFT = 4, + GPIO0C2_MASK = GENMASK(GPIO0C2_SHIFT + 1, GPIO0C2_SHIFT), + GPIO0C2_GPIO = 0, + GPIO0C2_LCDC_D14 = (1 << GPIO0C2_SHIFT), + GPIO0C2_TRACE_D4 = (2 << GPIO0C2_SHIFT), + GPIO0C2_MCU_JTAG_TDI = (3 << GPIO0C2_SHIFT), + + GPIO0C1_SHIFT = 2, + GPIO0C1_MASK = GENMASK(GPIO0C1_SHIFT + 1, GPIO0C1_SHIFT), + GPIO0C1_GPIO = 0, + GPIO0C1_LCDC_D13 = (1 << GPIO0C1_SHIFT), + GPIO0C1_TRACE_D3 = (2 << GPIO0C1_SHIFT), + GPIO0C1_MCU_JTAG_TRTSN = (3 << GPIO0C1_SHIFT), + + GPIO0C0_SHIFT = 0, + GPIO0C0_MASK = GENMASK(GPIO0C0_SHIFT + 1, GPIO0C0_SHIFT), + GPIO0C0_GPIO = 0, + GPIO0C0_LCDC_D12 = (1 << GPIO0C0_SHIFT), + GPIO0C0_TRACE_D2 = (2 << GPIO0C0_SHIFT), + GPIO0C0_MCU_JTAG_TDO = (3 << GPIO0C0_SHIFT), +}; + +/*GRF_GPIO0D_IOMUX*/ +enum { + GPIO0D7_SHIFT = 14, + GPIO0D7_MASK = GENMASK(GPIO0D7_SHIFT + 1, GPIO0D7_SHIFT), + GPIO0D7_GPIO = 0, + GPIO0D7_LCDC_DCLK = (1 << GPIO0D7_SHIFT), + GPIO0D7_TRACE_CTL = (2 << GPIO0D7_SHIFT), + GPIO0D7_PMU_DEBUG5 = (3 << GPIO0D7_SHIFT), + + GPIO0D6_SHIFT = 12, + GPIO0D6_MASK = GENMASK(GPIO0D6_SHIFT + 1, GPIO0D6_SHIFT), + GPIO0D6_GPIO = 0, + GPIO0D6_LCDC_DEN = (1 << GPIO0D6_SHIFT), + GPIO0D6_TRACE_CLK = (2 << GPIO0D6_SHIFT), + GPIO0D6_PMU_DEBUG4 = (3 << GPIO0D6_SHIFT), + + GPIO0D5_SHIFT = 10, + GPIO0D5_MASK = GENMASK(GPIO0D5_SHIFT + 1, GPIO0D5_SHIFT), + GPIO0D5_GPIO = 0, + GPIO0D5_LCDC_VSYNC = (1 << GPIO0D5_SHIFT), + GPIO0D5_TRACE_D15 = (2 << GPIO0D5_SHIFT), + GPIO0D5_PMU_DEBUG3 = (3 << GPIO0D5_SHIFT), + + GPIO0D4_SHIFT = 8, + GPIO0D4_MASK = GENMASK(GPIO0D4_SHIFT + 1, GPIO0D4_SHIFT), + GPIO0D4_GPIO = 0, + GPIO0D4_LCDC_HSYNC = (1 << GPIO0D4_SHIFT), + GPIO0D4_TRACE_D14 = (2 << GPIO0D4_SHIFT), + GPIO0D4_PMU_DEBUG2 = (3 << GPIO0D4_SHIFT), + + GPIO0D3_SHIFT = 6, + GPIO0D3_MASK = GENMASK(GPIO0D3_SHIFT + 1, GPIO0D3_SHIFT), + GPIO0D3_GPIO = 0, + GPIO0D3_LCDC_D23 = (1 << GPIO0D3_SHIFT), + GPIO0D3_TRACE_D13 = (2 << GPIO0D3_SHIFT), + GPIO0D3_UART4_SIN = (3 << GPIO0D3_SHIFT), + + GPIO0D2_SHIFT = 4, + GPIO0D2_MASK = GENMASK(GPIO0D2_SHIFT + 1, GPIO0D2_SHIFT), + GPIO0D2_GPIO = 0, + GPIO0D2_LCDC_D22 = (1 << GPIO0D2_SHIFT), + GPIO0D2_TRACE_D12 = (2 << GPIO0D2_SHIFT), + GPIO0D2_UART4_SOUT = (3 << GPIO0D2_SHIFT), + + GPIO0D1_SHIFT = 2, + GPIO0D1_MASK = GENMASK(GPIO0D1_SHIFT + 1, GPIO0D1_SHIFT), + GPIO0D1_GPIO = 0, + GPIO0D1_LCDC_D21 = (1 << GPIO0D1_SHIFT), + GPIO0D1_TRACE_D11 = (2 << GPIO0D1_SHIFT), + GPIO0D1_UART4_RTSN = (3 << GPIO0D1_SHIFT), + + GPIO0D0_SHIFT = 0, + GPIO0D0_MASK = GENMASK(GPIO0D0_SHIFT + 1, GPIO0D0_SHIFT), + GPIO0D0_GPIO = 0, + GPIO0D0_LCDC_D20 = (1 << GPIO0D0_SHIFT), + GPIO0D0_TRACE_D10 = (2 << GPIO0D0_SHIFT), + GPIO0D0_UART4_CTSN = (3 << GPIO0D0_SHIFT), +}; + +/*GRF_GPIO2A_IOMUX*/ +enum { + GPIO2A7_SHIFT = 14, + GPIO2A7_MASK = GENMASK(GPIO2A7_SHIFT + 1, GPIO2A7_SHIFT), + GPIO2A7_GPIO = 0, + GPIO2A7_SDMMC0_D2 = (1 << GPIO2A7_SHIFT), + GPIO2A7_JTAG_TCK = (2 << GPIO2A7_SHIFT), + + GPIO2A6_SHIFT = 12, + GPIO2A6_MASK = GENMASK(GPIO2A6_SHIFT + 1, GPIO2A6_SHIFT), + GPIO2A6_GPIO = 0, + GPIO2A6_SDMMC0_D1 = (1 << GPIO2A6_SHIFT), + GPIO2A6_UART2_SIN = (2 << GPIO2A6_SHIFT), + + GPIO2A5_SHIFT = 10, + GPIO2A5_MASK = GENMASK(GPIO2A5_SHIFT + 1, GPIO2A5_SHIFT), + GPIO2A5_GPIO = 0, + GPIO2A5_SDMMC0_D0 = (1 << GPIO2A5_SHIFT), + GPIO2A5_UART2_SOUT = (2 << GPIO2A5_SHIFT), + + GPIO2A4_SHIFT = 8, + GPIO2A4_MASK = GENMASK(GPIO2A4_SHIFT + 1, GPIO2A4_SHIFT), + GPIO2A4_GPIO = 0, + GPIO2A4_FLASH_DQS = (1 << GPIO2A4_SHIFT), + GPIO2A4_EMMC_CLKOUT = (2 << GPIO2A4_SHIFT), + + GPIO2A3_SHIFT = 6, + GPIO2A3_MASK = GENMASK(GPIO2A3_SHIFT + 1, GPIO2A3_SHIFT), + GPIO2A3_GPIO = 0, + GPIO2A3_FLASH_CSN3 = (1 << GPIO2A3_SHIFT), + GPIO2A3_EMMC_RSTNOUT = (2 << GPIO2A3_SHIFT), + + GPIO2A2_SHIFT = 4, + GPIO2A2_MASK = GENMASK(GPIO2A2_SHIFT + 1, GPIO2A2_SHIFT), + GPIO2A2_GPIO = 0, + GPIO2A2_FLASH_CSN2 = (1 << GPIO2A2_SHIFT), + + GPIO2A1_SHIFT = 2, + GPIO2A1_MASK = GENMASK(GPIO2A1_SHIFT + 1, GPIO2A1_SHIFT), + GPIO2A1_GPIO = 0, + GPIO2A1_FLASH_CSN1 = (1 << GPIO2A1_SHIFT), + + GPIO2A0_SHIFT = 0, + GPIO2A0_MASK = GENMASK(GPIO2A0_SHIFT + 1, GPIO2A0_SHIFT), + GPIO2A0_GPIO = 0, + GPIO2A0_FLASH_CSN0 = (1 << GPIO2A0_SHIFT), +}; + +/*GRF_GPIO2D_IOMUX*/ +enum { + GPIO2D7_SHIFT = 14, + GPIO2D7_MASK = GENMASK(GPIO2D7_SHIFT + 1, GPIO2D7_SHIFT), + GPIO2D7_GPIO = 0, + GPIO2D7_SDIO0_D3 = (1 << GPIO2D7_SHIFT), + + GPIO2D6_SHIFT = 12, + GPIO2D6_MASK = GENMASK(GPIO2D6_SHIFT + 1, GPIO2D6_SHIFT), + GPIO2D6_GPIO = 0, + GPIO2D6_SDIO0_D2 = (1 << GPIO2D6_SHIFT), + + GPIO2D5_SHIFT = 10, + GPIO2D5_MASK = GENMASK(GPIO2D5_SHIFT + 1, GPIO2D5_SHIFT), + GPIO2D5_GPIO = 0, + GPIO2D5_SDIO0_D1 = (1 << GPIO2D5_SHIFT), + + GPIO2D4_SHIFT = 8, + GPIO2D4_MASK = GENMASK(GPIO2D4_SHIFT + 1, GPIO2D4_SHIFT), + GPIO2D4_GPIO = 0, + GPIO2D4_SDIO0_D0 = (1 << GPIO2D4_SHIFT), + + GPIO2D3_SHIFT = 6, + GPIO2D3_MASK = GENMASK(GPIO2D3_SHIFT + 1, GPIO2D3_SHIFT), + GPIO2D3_GPIO = 0, + GPIO2D3_UART0_RTS0 = (1 << GPIO2D3_SHIFT), + + GPIO2D2_SHIFT = 4, + GPIO2D2_MASK = GENMASK(GPIO2D2_SHIFT + 1, GPIO2D2_SHIFT), + GPIO2D2_GPIO = 0, + GPIO2D2_UART0_CTS0 = (1 << GPIO2D2_SHIFT), + + GPIO2D1_SHIFT = 2, + GPIO2D1_MASK = GENMASK(GPIO2D1_SHIFT + 1, GPIO2D1_SHIFT), + GPIO2D1_GPIO = 0, + GPIO2D1_UART0_SOUT = (1 << GPIO2D1_SHIFT), + + GPIO2D0_SHIFT = 0, + GPIO2D0_MASK = GENMASK(GPIO2D0_SHIFT + 1, GPIO2D0_SHIFT), + GPIO2D0_GPIO = 0, + GPIO2D0_UART0_SIN = (1 << GPIO2D0_SHIFT), +}; + +/* GRF_GPIO1B_IOMUX */ +enum { + GPIO1B7_SHIFT = 14, + GPIO1B7_MASK = GENMASK(GPIO1B7_SHIFT + 1, GPIO1B7_SHIFT), + GPIO1B7_GPIO = 0, + GPIO1B7_SPI1_CSN0 = (2 << GPIO1B7_SHIFT), + + GPIO1B6_SHIFT = 12, + GPIO1B6_MASK = GENMASK(GPIO1B6_SHIFT + 1, GPIO1B6_SHIFT), + GPIO1B6_GPIO = 0, + GPIO1B6_SPI1_CLK = (2 << GPIO1B6_SHIFT), +}; + +/* GRF_GPIO1C_IOMUX */ +enum { + GPIO1C7_SHIFT = 14, + GPIO1C7_MASK = GENMASK(GPIO1C7_SHIFT + 1, GPIO1C7_SHIFT), + GPIO1C7_GPIO = 0, + GPIO1C7_EMMC_DATA5 = (2 << GPIO1C7_SHIFT), + GPIO1C7_SPI0_TXD = (3 << GPIO1C7_SHIFT), + + GPIO1C6_SHIFT = 12, + GPIO1C6_MASK = GENMASK(GPIO1C6_SHIFT + 1, GPIO1C6_SHIFT), + GPIO1C6_GPIO = 0, + GPIO1C6_EMMC_DATA4 = (2 << GPIO1C6_SHIFT), + GPIO1C6_SPI0_RXD = (3 << GPIO1C6_SHIFT), + + GPIO1C5_SHIFT = 10, + GPIO1C5_MASK = GENMASK(GPIO1C5_SHIFT + 1, GPIO1C5_SHIFT), + GPIO1C5_GPIO = 0, + GPIO1C5_EMMC_DATA3 = (2 << GPIO1C5_SHIFT), + + GPIO1C4_SHIFT = 8, + GPIO1C4_MASK = GENMASK(GPIO1C4_SHIFT + 1, GPIO1C4_SHIFT), + GPIO1C4_GPIO = 0, + GPIO1C4_EMMC_DATA2 = (2 << GPIO1C4_SHIFT), + + GPIO1C3_SHIFT = 6, + GPIO1C3_MASK = GENMASK(GPIO1C3_SHIFT + 1, GPIO1C3_SHIFT), + GPIO1C3_GPIO = 0, + GPIO1C3_EMMC_DATA1 = (2 << GPIO1C3_SHIFT), + + GPIO1C2_SHIFT = 4, + GPIO1C2_MASK = GENMASK(GPIO1C2_SHIFT + 1, GPIO1C2_SHIFT), + GPIO1C2_GPIO = 0, + GPIO1C2_EMMC_DATA0 = (2 << GPIO1C2_SHIFT), + + GPIO1C1_SHIFT = 2, + GPIO1C1_MASK = GENMASK(GPIO1C1_SHIFT + 1, GPIO1C1_SHIFT), + GPIO1C1_GPIO = 0, + GPIO1C1_SPI1_RXD = (2 << GPIO1C1_SHIFT), + + GPIO1C0_SHIFT = 0, + GPIO1C0_MASK = GENMASK(GPIO1C0_SHIFT + 1, GPIO1C0_SHIFT), + GPIO1C0_GPIO = 0, + GPIO1C0_SPI1_TXD = (2 << GPIO1C0_SHIFT), +}; + +/* GRF_GPIO1D_IOMUX*/ +enum { + GPIO1D5_SHIFT = 10, + GPIO1D5_MASK = GENMASK(GPIO1D5_SHIFT + 1, GPIO1D5_SHIFT), + GPIO1D5_GPIO = 0, + GPIO1D5_SPI0_CLK = (2 << GPIO1D5_SHIFT), + + GPIO1D3_SHIFT = 6, + GPIO1D3_MASK = GENMASK(GPIO1D3_SHIFT + 1, GPIO1D3_SHIFT), + GPIO1D3_GPIO = 0, + GPIO1D3_EMMC_PWREN = (2 << GPIO1D3_SHIFT), + + GPIO1D2_SHIFT = 4, + GPIO1D2_MASK = GENMASK(GPIO1D2_SHIFT + 1, GPIO1D2_SHIFT), + GPIO1D2_GPIO = 0, + GPIO1D2_EMMC_CMD = (2 << GPIO1D2_SHIFT), + + GPIO1D1_SHIFT = 2, + GPIO1D1_MASK = GENMASK(GPIO1D1_SHIFT + 1, GPIO1D1_SHIFT), + GPIO1D1_GPIO = 0, + GPIO1D1_EMMC_DATA7 = (2 << GPIO1D1_SHIFT), + GPIO1D1_SPI0_CSN1 = (3 << GPIO1D1_SHIFT), + + GPIO1D0_SHIFT = 0, + GPIO1D0_MASK = GENMASK(GPIO1D0_SHIFT + 1, GPIO1D0_SHIFT), + GPIO1D0_GPIO = 0, + GPIO1D0_EMMC_DATA6 = (2 << GPIO1D0_SHIFT), + GPIO1D0_SPI0_CSN0 = (3 << GPIO1D0_SHIFT), +}; + + +/*GRF_GPIO3B_IOMUX*/ +enum { + GPIO3B7_SHIFT = 14, + GPIO3B7_MASK = GENMASK(GPIO3B7_SHIFT + 1, GPIO3B7_SHIFT), + GPIO3B7_GPIO = 0, + GPIO3B7_MAC_RXD0 = (1 << GPIO3B7_SHIFT), + + GPIO3B6_SHIFT = 12, + GPIO3B6_MASK = GENMASK(GPIO3B6_SHIFT + 1, GPIO3B6_SHIFT), + GPIO3B6_GPIO = 0, + GPIO3B6_MAC_TXD3 = (1 << GPIO3B6_SHIFT), + + GPIO3B5_SHIFT = 10, + GPIO3B5_MASK = GENMASK(GPIO3B5_SHIFT + 1, GPIO3B5_SHIFT), + GPIO3B5_GPIO = 0, + GPIO3B5_MAC_TXEN = (1 << GPIO3B5_SHIFT), + + GPIO3B4_SHIFT = 8, + GPIO3B4_MASK = GENMASK(GPIO3B4_SHIFT + 1, GPIO3B4_SHIFT), + GPIO3B4_GPIO = 0, + GPIO3B4_MAC_COL = (1 << GPIO3B4_SHIFT), + + GPIO3B3_SHIFT = 6, + GPIO3B3_MASK = GENMASK(GPIO3B3_SHIFT + 1, GPIO3B3_SHIFT), + GPIO3B3_GPIO = 0, + GPIO3B3_MAC_CRS = (1 << GPIO3B3_SHIFT), + + GPIO3B2_SHIFT = 4, + GPIO3B2_MASK = GENMASK(GPIO3B2_SHIFT + 1, GPIO3B2_SHIFT), + GPIO3B2_GPIO = 0, + GPIO3B2_MAC_TXD2 = (1 << GPIO3B2_SHIFT), + + GPIO3B1_SHIFT = 2, + GPIO3B1_MASK = GENMASK(GPIO3B1_SHIFT + 1, GPIO3B1_SHIFT), + GPIO3B1_GPIO = 0, + GPIO3B1_MAC_TXD1 = (1 << GPIO3B1_SHIFT), + + GPIO3B0_SHIFT = 0, + GPIO3B0_MASK = GENMASK(GPIO3B0_SHIFT + 1, GPIO3B0_SHIFT), + GPIO3B0_GPIO = 0, + GPIO3B0_MAC_TXD0 = (1 << GPIO3B0_SHIFT), + GPIO3B0_PWM0 = (2 << GPIO3B0_SHIFT), +}; + +/*GRF_GPIO3C_IOMUX*/ +enum { + GPIO3C6_SHIFT = 12, + GPIO3C6_MASK = GENMASK(GPIO3C6_SHIFT + 1, GPIO3C6_SHIFT), + GPIO3C6_GPIO = 0, + GPIO3C6_MAC_CLK = (1 << GPIO3C6_SHIFT), + + GPIO3C5_SHIFT = 10, + GPIO3C5_MASK = GENMASK(GPIO3C5_SHIFT + 1, GPIO3C5_SHIFT), + GPIO3C5_GPIO = 0, + GPIO3C5_MAC_RXEN = (1 << GPIO3C5_SHIFT), + + GPIO3C4_SHIFT = 8, + GPIO3C4_MASK = GENMASK(GPIO3C4_SHIFT + 1, GPIO3C4_SHIFT), + GPIO3C4_GPIO = 0, + GPIO3C4_MAC_RXDV = (1 << GPIO3C4_SHIFT), + + GPIO3C3_SHIFT = 6, + GPIO3C3_MASK = GENMASK(GPIO3C3_SHIFT + 1, GPIO3C3_SHIFT), + GPIO3C3_GPIO = 0, + GPIO3C3_MAC_MDC = (1 << GPIO3C3_SHIFT), + + GPIO3C2_SHIFT = 4, + GPIO3C2_MASK = GENMASK(GPIO3C2_SHIFT + 1, GPIO3C2_SHIFT), + GPIO3C2_GPIO = 0, + GPIO3C2_MAC_RXD3 = (1 << GPIO3C2_SHIFT), + + GPIO3C1_SHIFT = 2, + GPIO3C1_MASK = GENMASK(GPIO3C1_SHIFT + 1, GPIO3C1_SHIFT), + GPIO3C1_GPIO = 0, + GPIO3C1_MAC_RXD2 = (1 << GPIO3C1_SHIFT), + + GPIO3C0_SHIFT = 0, + GPIO3C0_MASK = GENMASK(GPIO3C0_SHIFT + 1, GPIO3C0_SHIFT), + GPIO3C0_GPIO = 0, + GPIO3C0_MAC_RXD1 = (1 << GPIO3C0_SHIFT), +}; + +/*GRF_GPIO3D_IOMUX*/ +enum { + GPIO3D4_SHIFT = 8, + GPIO3D4_MASK = GENMASK(GPIO3D4_SHIFT + 1, GPIO3D4_SHIFT), + GPIO3D4_GPIO = 0, + GPIO3D4_MAC_TXCLK = (1 << GPIO3D4_SHIFT), + GPIO3D4_SPI1_CNS1 = (2 << GPIO3D4_SHIFT), + + GPIO3D1_SHIFT = 2, + GPIO3D1_MASK = GENMASK(GPIO3D1_SHIFT + 1, GPIO3D1_SHIFT), + GPIO3D1_GPIO = 0, + GPIO3D1_MAC_RXCLK = (1 << GPIO3D1_SHIFT), + + GPIO3D0_SHIFT = 0, + GPIO3D0_MASK = GENMASK(GPIO3D0_SHIFT + 1, GPIO3D0_SHIFT), + GPIO3D0_GPIO = 0, + GPIO3D0_MAC_MDIO = (1 << GPIO3D0_SHIFT), +}; + struct rk3368_pinctrl_priv { struct rk3368_grf *grf; struct rk3368_pmu_grf *pmugrf; @@ -31,8 +456,7 @@ static void pinctrl_rk3368_uart_config(struct rk3368_pinctrl_priv *priv, case PERIPH_ID_UART2: rk_clrsetreg(&grf->gpio2a_iomux, GPIO2A6_MASK | GPIO2A5_MASK, - GPIO2A6_UART2_SIN << GPIO2A6_SHIFT | - GPIO2A5_UART2_SOUT << GPIO2A5_SHIFT); + GPIO2A6_UART2_SIN | GPIO2A5_UART2_SOUT); break; case PERIPH_ID_UART0: break; @@ -44,10 +468,8 @@ static void pinctrl_rk3368_uart_config(struct rk3368_pinctrl_priv *priv, rk_clrsetreg(&pmugrf->gpio0d_iomux, GPIO0D0_MASK | GPIO0D1_MASK | GPIO0D2_MASK | GPIO0D3_MASK, - GPIO0D0_GPIO << GPIO0D0_SHIFT | - GPIO0D1_GPIO << GPIO0D1_SHIFT | - GPIO0D2_UART4_SOUT << GPIO0D2_SHIFT | - GPIO0D3_UART4_SIN << GPIO0D3_SHIFT); + GPIO0D0_GPIO | GPIO0D1_GPIO | + GPIO0D2_UART4_SOUT | GPIO0D3_UART4_SIN); break; default: debug("uart id = %d iomux error!\n", uart_id); @@ -55,6 +477,121 @@ static void pinctrl_rk3368_uart_config(struct rk3368_pinctrl_priv *priv, } } +static void pinctrl_rk3368_spi_config(struct rk3368_pinctrl_priv *priv, + int spi_id) +{ + struct rk3368_grf *grf = priv->grf; + struct rk3368_pmu_grf *pmugrf = priv->pmugrf; + + switch (spi_id) { + case PERIPH_ID_SPI0: + /* + * eMMC can only be connected with 4 bits, when SPI0 is used. + * This is all-or-nothing, so we assume that if someone asks us + * to configure SPI0, that their eMMC interface is unused or + * configured appropriately. + */ + rk_clrsetreg(&grf->gpio1d_iomux, + GPIO1D0_MASK | GPIO1D1_MASK | + GPIO1D5_MASK, + GPIO1D0_SPI0_CSN0 | GPIO1D1_SPI0_CSN1 | + GPIO1D5_SPI0_CLK); + rk_clrsetreg(&grf->gpio1c_iomux, + GPIO1C6_MASK | GPIO1C7_MASK, + GPIO1C6_SPI0_RXD | GPIO1C7_SPI0_TXD); + break; + case PERIPH_ID_SPI1: + /* + * We don't implement support for configuring SPI1_CSN#1, as it + * conflicts with the GMAC (MAC TX clk-out). + */ + rk_clrsetreg(&grf->gpio1b_iomux, + GPIO1B6_MASK | GPIO1B7_MASK, + GPIO1B6_SPI1_CLK | GPIO1B7_SPI1_CSN0); + rk_clrsetreg(&grf->gpio1c_iomux, + GPIO1C0_MASK | GPIO1C1_MASK, + GPIO1C0_SPI1_TXD | GPIO1C1_SPI1_RXD); + break; + case PERIPH_ID_SPI2: + rk_clrsetreg(&pmugrf->gpio0b_iomux, + GPIO0B2_MASK | GPIO0B3_MASK | + GPIO0B4_MASK | GPIO0B5_MASK, + GPIO0B2_SPI2_RXD | GPIO0B3_SPI2_TXD | + GPIO0B4_SPI2_CLK | GPIO0B5_SPI2_CSN0); + break; + default: + debug("%s: spi id = %d iomux error!\n", __func__, spi_id); + break; + } +} + +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) +static void pinctrl_rk3368_gmac_config(struct rk3368_grf *grf, int gmac_id) +{ + rk_clrsetreg(&grf->gpio3b_iomux, + GPIO3B0_MASK | GPIO3B1_MASK | + GPIO3B2_MASK | GPIO3B5_MASK | + GPIO3B6_MASK | GPIO3B7_MASK, + GPIO3B0_MAC_TXD0 | GPIO3B1_MAC_TXD1 | + GPIO3B2_MAC_TXD2 | GPIO3B5_MAC_TXEN | + GPIO3B6_MAC_TXD3 | GPIO3B7_MAC_RXD0); + rk_clrsetreg(&grf->gpio3c_iomux, + GPIO3C0_MASK | GPIO3C1_MASK | + GPIO3C2_MASK | GPIO3C3_MASK | + GPIO3C4_MASK | GPIO3C5_MASK | + GPIO3C6_MASK, + GPIO3C0_MAC_RXD1 | GPIO3C1_MAC_RXD2 | + GPIO3C2_MAC_RXD3 | GPIO3C3_MAC_MDC | + GPIO3C4_MAC_RXDV | GPIO3C5_MAC_RXEN | + GPIO3C6_MAC_CLK); + rk_clrsetreg(&grf->gpio3d_iomux, + GPIO3D0_MASK | GPIO3D1_MASK | + GPIO3D4_MASK, + GPIO3D0_MAC_MDIO | GPIO3D1_MAC_RXCLK | + GPIO3D4_MAC_TXCLK); +} +#endif + +static void pinctrl_rk3368_sdmmc_config(struct rk3368_grf *grf, int mmc_id) +{ + switch (mmc_id) { + case PERIPH_ID_EMMC: + debug("mmc id = %d setting registers!\n", mmc_id); + rk_clrsetreg(&grf->gpio1c_iomux, + GPIO1C2_MASK | GPIO1C3_MASK | + GPIO1C4_MASK | GPIO1C5_MASK | + GPIO1C6_MASK | GPIO1C7_MASK, + GPIO1C2_EMMC_DATA0 | + GPIO1C3_EMMC_DATA1 | + GPIO1C4_EMMC_DATA2 | + GPIO1C5_EMMC_DATA3 | + GPIO1C6_EMMC_DATA4 | + GPIO1C7_EMMC_DATA5); + rk_clrsetreg(&grf->gpio1d_iomux, + GPIO1D0_MASK | GPIO1D1_MASK | + GPIO1D2_MASK | GPIO1D3_MASK, + GPIO1D0_EMMC_DATA6 | + GPIO1D1_EMMC_DATA7 | + GPIO1D2_EMMC_CMD | + GPIO1D3_EMMC_PWREN); + rk_clrsetreg(&grf->gpio2a_iomux, + GPIO2A3_MASK | GPIO2A4_MASK, + GPIO2A3_EMMC_RSTNOUT | + GPIO2A4_EMMC_CLKOUT); + break; + case PERIPH_ID_SDCARD: + /* + * We assume that the BROM has already set this up + * correctly for us and that there's nothing to do + * here. + */ + break; + default: + debug("mmc id = %d iomux error!\n", mmc_id); + break; + } +} + static int rk3368_pinctrl_request(struct udevice *dev, int func, int flags) { struct rk3368_pinctrl_priv *priv = dev_get_priv(dev); @@ -68,6 +605,20 @@ static int rk3368_pinctrl_request(struct udevice *dev, int func, int flags) case PERIPH_ID_UART4: pinctrl_rk3368_uart_config(priv, func); break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + pinctrl_rk3368_spi_config(priv, func); + break; + case PERIPH_ID_EMMC: + case PERIPH_ID_SDCARD: + pinctrl_rk3368_sdmmc_config(priv->grf, func); + break; +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) + case PERIPH_ID_GMAC: + pinctrl_rk3368_gmac_config(priv->grf, func); + break; +#endif default: return -EINVAL; } @@ -97,6 +648,20 @@ static int rk3368_pinctrl_get_periph_id(struct udevice *dev, return PERIPH_ID_UART1; case 55: return PERIPH_ID_UART0; + case 44: + return PERIPH_ID_SPI0; + case 45: + return PERIPH_ID_SPI1; + case 41: + return PERIPH_ID_SPI2; + case 35: + return PERIPH_ID_EMMC; + case 32: + return PERIPH_ID_SDCARD; +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) + case 27: + return PERIPH_ID_GMAC; +#endif } return -ENOENT; diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index 61afd7a92a..836be25507 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -10,13 +10,22 @@ config RAM config SPL_RAM bool "Enable RAM support in SPL" - depends on RAM + depends on RAM && SPL_DM help The RAM subsystem adds a small amount of overhead to the image. If this is acceptable and you have a need to use RAM drivers in SPL, enable this option. It might provide a cleaner interface to setting up RAM (e.g. SDRAM / DDR) within SPL. +config TPL_RAM + bool "Enable RAM support in SPL" + depends on RAM && TPL_DM + help + The RAM subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use RAM drivers in + TPL, enable this option. It might provide a cleaner interface to + setting up RAM (e.g. SDRAM / DDR) within TPL. + config STM32_SDRAM bool "Enable STM32 SDRAM support" depends on RAM diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index c409c480fc..51ae6be655 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -8,3 +8,5 @@ obj-$(CONFIG_RAM) += ram-uclass.o obj-$(CONFIG_SANDBOX) += sandbox_ram.o obj-$(CONFIG_STM32_SDRAM) += stm32_sdram.o obj-$(CONFIG_ARCH_BMIPS) += bmips_ram.o + +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ diff --git a/drivers/ram/rockchip/Makefile b/drivers/ram/rockchip/Makefile new file mode 100644 index 0000000000..b09d03c2c9 --- /dev/null +++ b/drivers/ram/rockchip/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_ROCKCHIP_RK3368) = dmc-rk3368.o diff --git a/drivers/ram/rockchip/dmc-rk3368.c b/drivers/ram/rockchip/dmc-rk3368.c new file mode 100644 index 0000000000..ca7b1ff0c8 --- /dev/null +++ b/drivers/ram/rockchip/dmc-rk3368.c @@ -0,0 +1,1007 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct dram_info { + struct ram_info info; + struct clk ddr_clk; + struct rk3368_cru *cru; + struct rk3368_grf *grf; + struct rk3368_ddr_pctl *pctl; + struct rk3368_ddrphy *phy; + struct rk3368_pmu_grf *pmugrf; + struct rk3368_msch *msch; +}; + +struct rk3368_sdram_params { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_rockchip_rk3368_dmc of_plat; +#endif + struct rk3288_sdram_pctl_timing pctl_timing; + u32 trefi_mem_ddr3; + struct rk3288_sdram_channel chan; + struct regmap *map; + u32 ddr_freq; + u32 memory_schedule; + u32 ddr_speed_bin; + u32 tfaw_mult; +}; + +/* PTCL bits */ +enum { + /* PCTL_DFISTCFG0 */ + DFI_INIT_START = BIT(0), + DFI_DATA_BYTE_DISABLE_EN = BIT(2), + + /* PCTL_DFISTCFG1 */ + DFI_DRAM_CLK_SR_EN = BIT(0), + DFI_DRAM_CLK_DPD_EN = BIT(1), + ODT_LEN_BL8_W_SHIFT = 16, + + /* PCTL_DFISTCFG2 */ + DFI_PARITY_INTR_EN = BIT(0), + DFI_PARITY_EN = BIT(1), + + /* PCTL_DFILPCFG0 */ + TLP_RESP_TIME_SHIFT = 16, + LP_SR_EN = BIT(8), + LP_PD_EN = BIT(0), + + /* PCTL_DFIODTCFG */ + RANK0_ODT_WRITE_SEL = BIT(3), + RANK1_ODT_WRITE_SEL = BIT(11), + + /* PCTL_SCFG */ + HW_LOW_POWER_EN = BIT(0), + + /* PCTL_MCMD */ + START_CMD = BIT(31), + MCMD_RANK0 = BIT(20), + MCMD_RANK1 = BIT(21), + DESELECT_CMD = 0, + PREA_CMD, + REF_CMD, + MRS_CMD, + ZQCS_CMD, + ZQCL_CMD, + RSTL_CMD, + MRR_CMD = 8, + DPDE_CMD, + + /* PCTL_POWCTL */ + POWER_UP_START = BIT(0), + + /* PCTL_POWSTAT */ + POWER_UP_DONE = BIT(0), + + /* PCTL_SCTL */ + INIT_STATE = 0, + CFG_STATE, + GO_STATE, + SLEEP_STATE, + WAKEUP_STATE, + + /* PCTL_STAT */ + LP_TRIG_SHIFT = 4, + LP_TRIG_MASK = 7, + PCTL_STAT_MSK = 7, + INIT_MEM = 0, + CONFIG, + CONFIG_REQ, + ACCESS, + ACCESS_REQ, + LOW_POWER, + LOW_POWER_ENTRY_REQ, + LOW_POWER_EXIT_REQ, + + /* PCTL_MCFG */ + DDR2_DDR3_BL_8 = BIT(0), + DDR3_EN = BIT(5), + TFAW_TRRD_MULT4 = (0 << 18), + TFAW_TRRD_MULT5 = (1 << 18), + TFAW_TRRD_MULT6 = (2 << 18), +}; + +#define DDR3_MR0_WR(n) \ + ((n <= 8) ? ((n - 4) << 9) : (((n >> 1) & 0x7) << 9)) +#define DDR3_MR0_CL(n) \ + ((((n - 4) & 0x7) << 4) | (((n - 4) & 0x8) >> 2)) +#define DDR3_MR0_BL8 \ + (0 << 0) +#define DDR3_MR0_DLL_RESET \ + (1 << 8) +#define DDR3_MR1_RTT120OHM \ + ((0 << 9) | (1 << 6) | (0 << 2)) +#define DDR3_MR2_TWL(n) \ + (((n - 5) & 0x7) << 3) + + +#ifdef CONFIG_TPL_BUILD + +static void ddr_set_noc_spr_err_stall(struct rk3368_grf *grf, bool enable) +{ + if (enable) + rk_setreg(&grf->ddrc0_con0, NOC_RSP_ERR_STALL); + else + rk_clrreg(&grf->ddrc0_con0, NOC_RSP_ERR_STALL); +} + +static void ddr_set_ddr3_mode(struct rk3368_grf *grf, bool ddr3_mode) +{ + if (ddr3_mode) + rk_setreg(&grf->ddrc0_con0, MSCH0_MAINDDR3_DDR3); + else + rk_clrreg(&grf->ddrc0_con0, MSCH0_MAINDDR3_DDR3); +} + +static void ddrphy_config(struct rk3368_ddrphy *phy, + u32 tcl, u32 tal, u32 tcwl) +{ + int i; + + /* Set to DDR3 mode */ + clrsetbits_le32(&phy->reg[1], 0x3, 0x0); + + /* DDRPHY_REGB: CL, AL */ + clrsetbits_le32(&phy->reg[0xb], 0xff, tcl << 4 | tal); + /* DDRPHY_REGC: CWL */ + clrsetbits_le32(&phy->reg[0xc], 0x0f, tcwl); + + /* Update drive-strength */ + writel(0xcc, &phy->reg[0x11]); + writel(0xaa, &phy->reg[0x16]); + /* + * Update NRCOMP/PRCOMP for all 4 channels (for details of all + * affected registers refer to the documentation of DDRPHY_REG20 + * and DDRPHY_REG21 in the RK3368 TRM. + */ + for (i = 0; i < 4; ++i) { + writel(0xcc, &phy->reg[0x20 + i * 0x10]); + writel(0x44, &phy->reg[0x21 + i * 0x10]); + } + + /* Enable write-leveling calibration bypass */ + setbits_le32(&phy->reg[2], BIT(3)); +} + +static void copy_to_reg(u32 *dest, const u32 *src, u32 n) +{ + int i; + + for (i = 0; i < n / sizeof(u32); i++) + writel(*src++, dest++); +} + +static void send_command(struct rk3368_ddr_pctl *pctl, u32 rank, u32 cmd) +{ + u32 mcmd = START_CMD | cmd | rank; + + debug("%s: writing %x to MCMD\n", __func__, mcmd); + writel(mcmd, &pctl->mcmd); + while (readl(&pctl->mcmd) & START_CMD) + /* spin */; +} + +static void send_mrs(struct rk3368_ddr_pctl *pctl, + u32 rank, u32 mr_num, u32 mr_data) +{ + u32 mcmd = START_CMD | MRS_CMD | rank | (mr_num << 17) | (mr_data << 4); + + debug("%s: writing %x to MCMD\n", __func__, mcmd); + writel(mcmd, &pctl->mcmd); + while (readl(&pctl->mcmd) & START_CMD) + /* spin */; +} + +static int memory_init(struct rk3368_ddr_pctl *pctl, + struct rk3368_sdram_params *params) +{ + u32 mr[4]; + const ulong timeout_ms = 500; + ulong tmp; + + /* + * Power up DRAM by DDR_PCTL_POWCTL[0] register of PCTL and + * wait power up DRAM finish with DDR_PCTL_POWSTAT[0] register + * of PCTL. + */ + writel(POWER_UP_START, &pctl->powctl); + + tmp = get_timer(0); + do { + if (get_timer(tmp) > timeout_ms) { + error("%s: POWER_UP_START did not complete in %ld ms\n", + __func__, timeout_ms); + return -ETIME; + } + } while (!(readl(&pctl->powstat) & POWER_UP_DONE)); + + /* Configure MR0 through MR3 */ + mr[0] = DDR3_MR0_WR(params->pctl_timing.twr) | + DDR3_MR0_CL(params->pctl_timing.tcl) | + DDR3_MR0_DLL_RESET; + mr[1] = DDR3_MR1_RTT120OHM; + mr[2] = DDR3_MR2_TWL(params->pctl_timing.tcwl); + mr[3] = 0; + + /* + * Also see RK3368 Technical Reference Manual: + * "16.6.2 Initialization (DDR3 Initialization Sequence)" + */ + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, DESELECT_CMD); + udelay(1); + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, PREA_CMD); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 2, mr[2]); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 3, mr[3]); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 1, mr[1]); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 0, mr[0]); + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, ZQCL_CMD); + + return 0; +} + +static void move_to_config_state(struct rk3368_ddr_pctl *pctl) +{ + /* + * Also see RK3368 Technical Reference Manual: + * "16.6.1 State transition of PCTL (Moving to Config State)" + */ + u32 state = readl(&pctl->stat) & PCTL_STAT_MSK; + + switch (state) { + case LOW_POWER: + writel(WAKEUP_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != ACCESS) + /* spin */; + + /* fall-through */ + case ACCESS: + case INIT_MEM: + writel(CFG_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG) + /* spin */; + break; + + case CONFIG: + return; + + default: + break; + } +} + +static void move_to_access_state(struct rk3368_ddr_pctl *pctl) +{ + /* + * Also see RK3368 Technical Reference Manual: + * "16.6.1 State transition of PCTL (Moving to Access State)" + */ + u32 state = readl(&pctl->stat) & PCTL_STAT_MSK; + + switch (state) { + case LOW_POWER: + if (((readl(&pctl->stat) >> LP_TRIG_SHIFT) & + LP_TRIG_MASK) == 1) + return; + + writel(WAKEUP_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != ACCESS) + /* spin */; + + /* fall-through */ + case INIT_MEM: + writel(CFG_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG) + /* spin */; + + /* fall-through */ + case CONFIG: + writel(GO_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) == CONFIG) + /* spin */; + break; + + case ACCESS: + return; + + default: + break; + } +} + +static void ddrctl_reset(struct rk3368_cru *cru) +{ + const u32 ctl_reset = BIT(3) | BIT(2); + const u32 phy_reset = BIT(1) | BIT(0); + + /* + * The PHY reset should be released before the PCTL reset. + * + * Note that the following sequence (including the number of + * us to delay between releasing the PHY and PCTL reset) has + * been adapted per feedback received from Rockchips, so do + * not try to optimise. + */ + rk_setreg(&cru->softrst_con[10], ctl_reset | phy_reset); + udelay(1); + rk_clrreg(&cru->softrst_con[10], phy_reset); + udelay(5); + rk_clrreg(&cru->softrst_con[10], ctl_reset); +} + +static void ddrphy_reset(struct rk3368_ddrphy *ddrphy) +{ + /* + * The analog part of the PHY should be release at least 1000 + * DRAM cycles before the digital part of the PHY (waiting for + * 5us will ensure this for a DRAM clock as low as 200MHz). + */ + clrbits_le32(&ddrphy->reg[0], BIT(3) | BIT(2)); + udelay(1); + setbits_le32(&ddrphy->reg[0], BIT(2)); + udelay(5); + setbits_le32(&ddrphy->reg[0], BIT(3)); +} + +static void ddrphy_config_delays(struct rk3368_ddrphy *ddrphy, u32 freq) +{ + u32 dqs_dll_delay; + + setbits_le32(&ddrphy->reg[0x13], BIT(4)); + clrbits_le32(&ddrphy->reg[0x14], BIT(3)); + + setbits_le32(&ddrphy->reg[0x26], BIT(4)); + clrbits_le32(&ddrphy->reg[0x27], BIT(3)); + + setbits_le32(&ddrphy->reg[0x36], BIT(4)); + clrbits_le32(&ddrphy->reg[0x37], BIT(3)); + + setbits_le32(&ddrphy->reg[0x46], BIT(4)); + clrbits_le32(&ddrphy->reg[0x47], BIT(3)); + + setbits_le32(&ddrphy->reg[0x56], BIT(4)); + clrbits_le32(&ddrphy->reg[0x57], BIT(3)); + + if (freq <= 400000000) + setbits_le32(&ddrphy->reg[0xa4], 0x1f); + else + clrbits_le32(&ddrphy->reg[0xa4], 0x1f); + + if (freq < 681000000) + dqs_dll_delay = 3; /* 67.5 degree delay */ + else + dqs_dll_delay = 2; /* 45 degree delay */ + + writel(dqs_dll_delay, &ddrphy->reg[0x28]); + writel(dqs_dll_delay, &ddrphy->reg[0x38]); + writel(dqs_dll_delay, &ddrphy->reg[0x48]); + writel(dqs_dll_delay, &ddrphy->reg[0x58]); +} + +static int dfi_cfg(struct rk3368_ddr_pctl *pctl) +{ + const ulong timeout_ms = 200; + ulong tmp; + + writel(DFI_DATA_BYTE_DISABLE_EN, &pctl->dfistcfg0); + + writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN, + &pctl->dfistcfg1); + writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2); + writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN, + &pctl->dfilpcfg0); + + writel(1, &pctl->dfitphyupdtype0); + + writel(0x1f, &pctl->dfitphyrdlat); + writel(0, &pctl->dfitphywrdata); + writel(0, &pctl->dfiupdcfg); /* phyupd and ctrlupd disabled */ + + setbits_le32(&pctl->dfistcfg0, DFI_INIT_START); + + tmp = get_timer(0); + do { + if (get_timer(tmp) > timeout_ms) { + error("%s: DFI init did not complete within %ld ms\n", + __func__, timeout_ms); + return -ETIME; + } + } while ((readl(&pctl->dfiststat0) & 1) == 0); + + return 0; +} + +static inline u32 ps_to_tCK(const u32 ps, const ulong freq) +{ + const ulong MHz = 1000000; + return DIV_ROUND_UP(ps * freq, 1000000 * MHz); +} + +static inline u32 ns_to_tCK(const u32 ns, const ulong freq) +{ + return ps_to_tCK(ns * 1000, freq); +} + +static inline u32 tCK_to_ps(const ulong tCK, const ulong freq) +{ + const ulong MHz = 1000000; + return DIV_ROUND_UP(tCK * 1000000 * MHz, freq); +} + +static int pctl_calc_timings(struct rk3368_sdram_params *params, + ulong freq) +{ + struct rk3288_sdram_pctl_timing *pctl_timing = ¶ms->pctl_timing; + const ulong MHz = 1000000; + u32 tccd; + u32 tfaw_as_ps; + + if (params->ddr_speed_bin != DDR3_1600K) { + error("%s: unimplemented DDR3 speed bin %d\n", + __func__, params->ddr_speed_bin); + return -1; + } + + /* PCTL is clocked at 1/2 the DRAM clock; err on the side of caution */ + pctl_timing->togcnt1u = DIV_ROUND_UP(freq, 2 * MHz); + pctl_timing->togcnt100n = DIV_ROUND_UP(freq / 10, 2 * MHz); + + pctl_timing->tinit = 200; /* 200 usec */ + pctl_timing->trsth = 500; /* 500 usec */ + pctl_timing->trefi = 78; /* 7.8usec = 78 * 100ns */ + params->trefi_mem_ddr3 = ns_to_tCK(pctl_timing->trefi * 100, freq); + + if (freq <= (400 * MHz)) { + pctl_timing->tcl = 6; + pctl_timing->tcwl = 10; + } else if (freq <= (533 * MHz)) { + pctl_timing->tcl = 8; + pctl_timing->tcwl = 6; + } else if (freq <= (666 * MHz)) { + pctl_timing->tcl = 10; + pctl_timing->tcwl = 7; + } else { + pctl_timing->tcl = 11; + pctl_timing->tcwl = 8; + } + + pctl_timing->tmrd = 4; /* 4 tCK (all speed bins) */ + pctl_timing->trfc = ns_to_tCK(350, freq); /* tRFC: 350 (max) @ 8GBit */ + pctl_timing->trp = max(4u, ps_to_tCK(13750, freq)); + /* + * JESD-79: + * READ to WRITE Command Delay = RL + tCCD / 2 + 2tCK - WL + */ + tccd = 4; + pctl_timing->trtw = pctl_timing->tcl + tccd/2 + 2 - pctl_timing->tcwl; + pctl_timing->tal = 0; + pctl_timing->tras = ps_to_tCK(35000, freq); + pctl_timing->trc = ps_to_tCK(48750, freq); + pctl_timing->trcd = ps_to_tCK(13750, freq); + pctl_timing->trrd = max(4u, ps_to_tCK(7500, freq)); + pctl_timing->trtp = max(4u, ps_to_tCK(7500, freq)); + pctl_timing->twr = ps_to_tCK(15000, freq); + /* The DDR3 mode-register does only support even values for tWR > 8. */ + if (pctl_timing->twr > 8) + pctl_timing->twr = (pctl_timing->twr + 1) & ~1; + pctl_timing->twtr = max(4u, ps_to_tCK(7500, freq)); + pctl_timing->texsr = 512; /* tEXSR(max) is tDLLLK */ + pctl_timing->txp = max(3u, ps_to_tCK(6000, freq)); + pctl_timing->txpdll = max(10u, ps_to_tCK(24000, freq)); + pctl_timing->tzqcs = max(64u, ps_to_tCK(80000, freq)); + pctl_timing->tzqcsi = 10000; /* as used by Rockchip */ + pctl_timing->tdqs = 1; /* fixed for DDR3 */ + pctl_timing->tcksre = max(5u, ps_to_tCK(10000, freq)); + pctl_timing->tcksrx = max(5u, ps_to_tCK(10000, freq)); + pctl_timing->tcke = max(3u, ps_to_tCK(5000, freq)); + pctl_timing->tmod = max(12u, ps_to_tCK(15000, freq)); + pctl_timing->trstl = ns_to_tCK(100, freq); + pctl_timing->tzqcl = max(256u, ps_to_tCK(320000, freq)); /* tZQoper */ + pctl_timing->tmrr = 0; + pctl_timing->tckesr = pctl_timing->tcke + 1; /* JESD-79: tCKE + 1tCK */ + pctl_timing->tdpd = 0; /* RK3368 TRM: "allowed values for DDR3: 0" */ + + + /* + * The controller can represent tFAW as 4x, 5x or 6x tRRD only. + * We want to use the smallest multiplier that satisfies the tFAW + * requirements of the given speed-bin. If necessary, we stretch out + * tRRD to allow us to operate on a 6x multiplier for tFAW. + */ + tfaw_as_ps = 40000; /* 40ns: tFAW for DDR3-1600K, 2KB page-size */ + if (tCK_to_ps(pctl_timing->trrd * 6, freq) < tfaw_as_ps) { + /* If tFAW is > 6 x tRRD, we need to stretch tRRD */ + pctl_timing->trrd = ps_to_tCK(DIV_ROUND_UP(40000, 6), freq); + params->tfaw_mult = TFAW_TRRD_MULT6; + } else if (tCK_to_ps(pctl_timing->trrd * 5, freq) < tfaw_as_ps) { + params->tfaw_mult = TFAW_TRRD_MULT6; + } else if (tCK_to_ps(pctl_timing->trrd * 4, freq) < tfaw_as_ps) { + params->tfaw_mult = TFAW_TRRD_MULT5; + } else { + params->tfaw_mult = TFAW_TRRD_MULT4; + } + + return 0; +} + +static void pctl_cfg(struct rk3368_ddr_pctl *pctl, + struct rk3368_sdram_params *params, + struct rk3368_grf *grf) +{ + /* Configure PCTL timing registers */ + params->pctl_timing.trefi |= BIT(31); /* see PCTL_TREFI */ + copy_to_reg(&pctl->togcnt1u, ¶ms->pctl_timing.togcnt1u, + sizeof(params->pctl_timing)); + writel(params->trefi_mem_ddr3, &pctl->trefi_mem_ddr3); + + /* Set up ODT write selector and ODT write length */ + writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL), &pctl->dfiodtcfg); + writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1); + + /* Set up the CL/CWL-dependent timings of DFI */ + writel((params->pctl_timing.tcl - 1) / 2 - 1, &pctl->dfitrddataen); + writel((params->pctl_timing.tcwl - 1) / 2 - 1, &pctl->dfitphywrlat); + + /* DDR3 */ + writel(params->tfaw_mult | DDR3_EN | DDR2_DDR3_BL_8, &pctl->mcfg); + writel(0x001c0004, &grf->ddrc0_con0); + + setbits_le32(&pctl->scfg, HW_LOW_POWER_EN); +} + +static int ddrphy_data_training(struct rk3368_ddr_pctl *pctl, + struct rk3368_ddrphy *ddrphy) +{ + const u32 trefi = readl(&pctl->trefi); + const ulong timeout_ms = 500; + ulong tmp; + + /* disable auto-refresh */ + writel(0 | BIT(31), &pctl->trefi); + + clrsetbits_le32(&ddrphy->reg[2], 0x33, 0x20); + clrsetbits_le32(&ddrphy->reg[2], 0x33, 0x21); + + tmp = get_timer(0); + do { + if (get_timer(tmp) > timeout_ms) { + error("%s: did not complete within %ld ms\n", + __func__, timeout_ms); + return -ETIME; + } + } while ((readl(&ddrphy->reg[0xff]) & 0xf) != 0xf); + + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, PREA_CMD); + clrsetbits_le32(&ddrphy->reg[2], 0x33, 0x20); + /* resume auto-refresh */ + writel(trefi | BIT(31), &pctl->trefi); + + return 0; +} + +static int sdram_col_row_detect(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + struct rk3368_sdram_params *params = dev_get_platdata(dev); + struct rk3368_ddr_pctl *pctl = priv->pctl; + struct rk3368_msch *msch = priv->msch; + const u32 test_pattern = 0x5aa5f00f; + int row, col; + uintptr_t addr; + + move_to_config_state(pctl); + writel(6, &msch->ddrconf); + move_to_access_state(pctl); + + /* Detect col */ + for (col = 11; col >= 9; col--) { + writel(0, CONFIG_SYS_SDRAM_BASE); + addr = CONFIG_SYS_SDRAM_BASE + + (1 << (col + params->chan.bw - 1)); + writel(test_pattern, addr); + if ((readl(addr) == test_pattern) && + (readl(CONFIG_SYS_SDRAM_BASE) == 0)) + break; + } + + if (col == 8) { + error("%s: col detect error\n", __func__); + return -EINVAL; + } + + move_to_config_state(pctl); + writel(15, &msch->ddrconf); + move_to_access_state(pctl); + + /* Detect row*/ + for (row = 16; row >= 12; row--) { + writel(0, CONFIG_SYS_SDRAM_BASE); + addr = CONFIG_SYS_SDRAM_BASE + (1 << (row + 15 - 1)); + writel(test_pattern, addr); + if ((readl(addr) == test_pattern) && + (readl(CONFIG_SYS_SDRAM_BASE) == 0)) + break; + } + + if (row == 11) { + error("%s: row detect error\n", __func__); + return -EINVAL; + } + + /* Record results */ + debug("%s: col %d, row %d\n", __func__, col, row); + params->chan.col = col; + params->chan.cs0_row = row; + params->chan.cs1_row = row; + params->chan.row_3_4 = 0; + + return 0; +} + +static int msch_niu_config(struct rk3368_msch *msch, + struct rk3368_sdram_params *params) +{ + int i; + const u8 cols = params->chan.col - ((params->chan.bw == 2) ? 0 : 1); + const u8 rows = params->chan.cs0_row; + + /* + * The DDR address-translation table always assumes a 32bit + * bus and the comparison below takes care of adjusting for + * a 16bit bus (i.e. one column-address is consumed). + */ + const struct { + u8 rows; + u8 columns; + u8 type; + } ddrconf_table[] = { + /* + * C-B-R-D patterns are first. For these we require an + * exact match for the columns and rows (as there's + * one entry per possible configuration). + */ + [0] = { .rows = 13, .columns = 10, .type = DMC_MSCH_CBRD }, + [1] = { .rows = 14, .columns = 10, .type = DMC_MSCH_CBRD }, + [2] = { .rows = 15, .columns = 10, .type = DMC_MSCH_CBRD }, + [3] = { .rows = 16, .columns = 10, .type = DMC_MSCH_CBRD }, + [4] = { .rows = 14, .columns = 11, .type = DMC_MSCH_CBRD }, + [5] = { .rows = 15, .columns = 11, .type = DMC_MSCH_CBRD }, + [6] = { .rows = 16, .columns = 11, .type = DMC_MSCH_CBRD }, + [7] = { .rows = 13, .columns = 9, .type = DMC_MSCH_CBRD }, + [8] = { .rows = 14, .columns = 9, .type = DMC_MSCH_CBRD }, + [9] = { .rows = 15, .columns = 9, .type = DMC_MSCH_CBRD }, + [10] = { .rows = 16, .columns = 9, .type = DMC_MSCH_CBRD }, + /* + * 11 through 13 are C-R-B-D patterns. These are + * matched for an exact number of columns and to + * ensure that the hardware uses at least as many rows + * as the pattern requires (i.e. we make sure that + * there's no gaps up until we hit the device/chip-select; + * however, these patterns can accept up to 16 rows, + * as the row-address continues right after the CS + * switching) + */ + [11] = { .rows = 15, .columns = 10, .type = DMC_MSCH_CRBD }, + [12] = { .rows = 14, .columns = 11, .type = DMC_MSCH_CRBD }, + [13] = { .rows = 13, .columns = 10, .type = DMC_MSCH_CRBD }, + /* + * 14 and 15 are catch-all variants using a C-B-D-R + * scheme (i.e. alternating the chip-select every time + * C-B overflows) and stuffing the remaining C-bits + * into the top. Matching needs to make sure that the + * number of columns is either an exact match (i.e. we + * can use less the the maximum number of rows) -or- + * that the columns exceed what is given in this table + * and the rows are an exact match (in which case the + * remaining C-bits will be stuffed onto the top after + * the device/chip-select switches). + */ + [14] = { .rows = 16, .columns = 10, .type = DMC_MSCH_CBDR }, + [15] = { .rows = 16, .columns = 9, .type = DMC_MSCH_CBDR }, + }; + + /* + * For C-B-R-D, we need an exact match (i.e. both for the number of + * columns and rows), while for C-B-D-R, only the the number of + * columns needs to match. + */ + for (i = 0; i < ARRAY_SIZE(ddrconf_table); i++) { + bool match = false; + + /* If this entry if for a different matcher, then skip it */ + if (ddrconf_table[i].type != params->memory_schedule) + continue; + + /* + * Match according to the rules (exact/inexact/at-least) + * documented in the ddrconf_table above. + */ + switch (params->memory_schedule) { + case DMC_MSCH_CBRD: + match = (ddrconf_table[i].columns == cols) && + (ddrconf_table[i].rows == rows); + break; + + case DMC_MSCH_CRBD: + match = (ddrconf_table[i].columns == cols) && + (ddrconf_table[i].rows <= rows); + break; + + case DMC_MSCH_CBDR: + match = (ddrconf_table[i].columns == cols) || + ((ddrconf_table[i].columns <= cols) && + (ddrconf_table[i].rows == rows)); + break; + + default: + break; + } + + if (match) { + debug("%s: setting ddrconf 0x%x\n", __func__, i); + writel(i, &msch->ddrconf); + return 0; + } + } + + error("%s: ddrconf (NIU config) not found\n", __func__); + return -EINVAL; +} + +static void dram_all_config(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + struct rk3368_pmu_grf *pmugrf = priv->pmugrf; + struct rk3368_sdram_params *params = dev_get_platdata(dev); + const struct rk3288_sdram_channel *info = ¶ms->chan; + u32 sys_reg = 0; + const int chan = 0; + + sys_reg |= DDR3 << SYS_REG_DDRTYPE_SHIFT; + sys_reg |= 0 << SYS_REG_NUM_CH_SHIFT; + + sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(chan); + sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(chan); + sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(chan); + sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(chan); + sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(chan); + sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(chan); + sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(chan); + sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(chan); + sys_reg |= (2 >> info->dbw) << SYS_REG_DBW_SHIFT(chan); + + writel(sys_reg, &pmugrf->os_reg[2]); +} + +static int setup_sdram(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + struct rk3368_sdram_params *params = dev_get_platdata(dev); + + struct rk3368_ddr_pctl *pctl = priv->pctl; + struct rk3368_ddrphy *ddrphy = priv->phy; + struct rk3368_cru *cru = priv->cru; + struct rk3368_grf *grf = priv->grf; + struct rk3368_msch *msch = priv->msch; + + int ret; + + /* The input clock (i.e. DPLL) needs to be 2x the DRAM frequency */ + ret = clk_set_rate(&priv->ddr_clk, 2 * params->ddr_freq); + if (ret < 0) { + debug("%s: could not set DDR clock: %d\n", __func__, ret); + return ret; + } + + /* Update the read-latency for the RK3368 */ + writel(0x32, &msch->readlatency); + + /* Initialise the DDR PCTL and DDR PHY */ + ddrctl_reset(cru); + ddrphy_reset(ddrphy); + ddrphy_config_delays(ddrphy, params->ddr_freq); + dfi_cfg(pctl); + /* Configure relative system information of grf_ddrc0_con0 register */ + ddr_set_ddr3_mode(grf, true); + ddr_set_noc_spr_err_stall(grf, true); + /* Calculate timings */ + pctl_calc_timings(params, params->ddr_freq); + /* Initialise the device timings in protocol controller */ + pctl_cfg(pctl, params, grf); + /* Configure AL, CL ... information of PHY registers */ + ddrphy_config(ddrphy, + params->pctl_timing.tcl, + params->pctl_timing.tal, + params->pctl_timing.tcwl); + + /* Initialize DRAM and configure with mode-register values */ + ret = memory_init(pctl, params); + if (ret) + goto error; + + move_to_config_state(pctl); + /* Perform data-training */ + ddrphy_data_training(pctl, ddrphy); + move_to_access_state(pctl); + + /* TODO(prt): could detect rank in training... */ + params->chan.rank = 2; + /* TODO(prt): bus width is not auto-detected (yet)... */ + params->chan.bw = 2; /* 32bit wide bus */ + params->chan.dbw = params->chan.dbw; /* 32bit wide bus */ + + /* DDR3 is always 8 bank */ + params->chan.bk = 3; + /* Detect col and row number */ + ret = sdram_col_row_detect(dev); + if (ret) + goto error; + + /* Configure NIU DDR configuration */ + ret = msch_niu_config(msch, params); + if (ret) + goto error; + + /* set up OS_REG to communicate w/ next stage and OS */ + dram_all_config(dev); + + return 0; + +error: + printf("DRAM init failed!\n"); + hang(); +} +#endif + +static int rk3368_dmc_ofdata_to_platdata(struct udevice *dev) +{ + int ret = 0; + +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct rk3368_sdram_params *plat = dev_get_platdata(dev); + + ret = regmap_init_mem(dev, &plat->map); + if (ret) + return ret; +#endif + + return ret; +} + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +static int conv_of_platdata(struct udevice *dev) +{ + struct rk3368_sdram_params *plat = dev_get_platdata(dev); + struct dtd_rockchip_rk3368_dmc *of_plat = &plat->of_plat; + int ret; + + plat->ddr_freq = of_plat->rockchip_ddr_frequency; + plat->ddr_speed_bin = of_plat->rockchip_ddr_speed_bin; + plat->memory_schedule = of_plat->rockchip_memory_schedule; + + ret = regmap_init_mem_platdata(dev, of_plat->reg, + ARRAY_SIZE(of_plat->reg) / 2, + &plat->map); + if (ret) + return ret; + + return 0; +} +#endif + +static int rk3368_dmc_probe(struct udevice *dev) +{ +#ifdef CONFIG_TPL_BUILD + struct rk3368_sdram_params *plat = dev_get_platdata(dev); + struct rk3368_ddr_pctl *pctl; + struct rk3368_ddrphy *ddrphy; + struct rk3368_cru *cru; + struct rk3368_grf *grf; + struct rk3368_msch *msch; + int ret; + struct udevice *dev_clk; +#endif + struct dram_info *priv = dev_get_priv(dev); + +#if CONFIG_IS_ENABLED(OF_PLATDATA) + ret = conv_of_platdata(dev); + if (ret) + return ret; +#endif + + priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); + debug("%s: pmugrf=%p\n", __func__, priv->pmugrf); + +#ifdef CONFIG_TPL_BUILD + pctl = regmap_get_range(plat->map, 0); + ddrphy = regmap_get_range(plat->map, 1); + msch = syscon_get_first_range(ROCKCHIP_SYSCON_MSCH); + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + + priv->pctl = pctl; + priv->phy = ddrphy; + priv->msch = msch; + priv->grf = grf; + + ret = rockchip_get_clk(&dev_clk); + if (ret) + return ret; + priv->ddr_clk.id = CLK_DDR; + ret = clk_request(dev_clk, &priv->ddr_clk); + if (ret) + return ret; + + cru = rockchip_get_cru(); + priv->cru = cru; + if (IS_ERR(priv->cru)) + return PTR_ERR(priv->cru); + + ret = setup_sdram(dev); + if (ret) + return ret; +#endif + + priv->info.base = 0; + priv->info.size = + rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg[2]); + + /* + * we use the 0x00000000~0xfdffffff space since 0xff000000~0xffffffff + * is SoC register space (i.e. reserved), and 0xfe000000~0xfeffffff is + * inaccessible for some IP controller. + */ + priv->info.size = min(priv->info.size, (size_t)0xfe000000); + + return 0; +} + +static int rk3368_dmc_get_info(struct udevice *dev, struct ram_info *info) +{ + struct dram_info *priv = dev_get_priv(dev); + + *info = priv->info; + return 0; +} + +static struct ram_ops rk3368_dmc_ops = { + .get_info = rk3368_dmc_get_info, +}; + + +static const struct udevice_id rk3368_dmc_ids[] = { + { .compatible = "rockchip,rk3368-dmc" }, + { } +}; + +U_BOOT_DRIVER(dmc_rk3368) = { + .name = "rockchip_rk3368_dmc", + .id = UCLASS_RAM, + .of_match = rk3368_dmc_ids, + .ops = &rk3368_dmc_ops, + .probe = rk3368_dmc_probe, + .priv_auto_alloc_size = sizeof(struct dram_info), + .ofdata_to_platdata = rk3368_dmc_ofdata_to_platdata, + .probe = rk3368_dmc_probe, + .priv_auto_alloc_size = sizeof(struct dram_info), + .platdata_auto_alloc_size = sizeof(struct rk3368_sdram_params), +}; diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c index 7921ea0d75..c70d636277 100644 --- a/drivers/spi/rk_spi.c +++ b/drivers/spi/rk_spi.c @@ -210,6 +210,14 @@ static int rockchip_spi_ofdata_to_platdata(struct udevice *bus) static int rockchip_spi_calc_modclk(ulong max_freq) { + /* + * While this is not strictly correct for the RK3368, as the + * GPLL will be 576MHz, things will still work, as the + * clk_set_rate(...) implementation in our clock-driver will + * chose the next closest rate not exceeding what we request + * based on the output of this function. + */ + unsigned div; const unsigned long gpll_hz = 594000000UL; @@ -443,6 +451,7 @@ static const struct dm_spi_ops rockchip_spi_ops = { static const struct udevice_id rockchip_spi_ids[] = { { .compatible = "rockchip,rk3288-spi" }, + { .compatible = "rockchip,rk3368-spi" }, { .compatible = "rockchip,rk3399-spi" }, { } }; diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index c666303331..13f122350b 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -9,6 +9,24 @@ config TIMER will be used. The timer is usually a 32 bits free-running up counter. There may be no real tick, and no timer interrupt. +config SPL_TIMER + bool "Enable driver model for timer drivers in SPL" + depends on TIMER && SPL + help + Enable support for timer drivers in SPL. These can be used to get + a timer value when in SPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + SPL build. + +config TPL_TIMER + bool "Enable driver model for timer drivers in TPL" + depends on TIMER && TPL + help + Enable support for timer drivers in TPL. These can be used to get + a timer value when in TPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + TPL build. + config TIMER_EARLY bool "Allow timer to be used early in U-Boot" depends on TIMER @@ -85,4 +103,11 @@ config AE3XX_TIMER help Select this to enable a timer for AE3XX devices. +config ROCKCHIP_TIMER + bool "Rockchip timer support" + depends on TIMER + help + Select this to enable support for the timer found on + Rockchip devices. + endmenu diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile index ced7bd66bd..fa7ce7c835 100644 --- a/drivers/timer/Makefile +++ b/drivers/timer/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_TIMER) += timer-uclass.o +obj-y += timer-uclass.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o @@ -14,3 +14,4 @@ obj-$(CONFIG_STI_TIMER) += sti-timer.o obj-$(CONFIG_ARC_TIMER) += arc_timer.o obj-$(CONFIG_AG101P_TIMER) += ag101p_timer.o obj-$(CONFIG_AE3XX_TIMER) += ae3xx_timer.o +obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o diff --git a/drivers/timer/rockchip_timer.c b/drivers/timer/rockchip_timer.c new file mode 100644 index 0000000000..0848033c66 --- /dev/null +++ b/drivers/timer/rockchip_timer.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +struct rockchip_timer_plat { + struct dtd_rockchip_rk3368_timer dtd; +}; +#endif + +/* Driver private data. Contains timer id. Could be either 0 or 1. */ +struct rockchip_timer_priv { + struct rk_timer *timer; +}; + +static int rockchip_timer_get_count(struct udevice *dev, u64 *count) +{ + struct rockchip_timer_priv *priv = dev_get_priv(dev); + uint64_t timebase_h, timebase_l; + uint64_t cntr; + + timebase_l = readl(&priv->timer->timer_curr_value0); + timebase_h = readl(&priv->timer->timer_curr_value1); + + /* timers are down-counting */ + cntr = timebase_h << 32 | timebase_l; + *count = ~0ull - cntr; + return 0; +} + +static int rockchip_clk_ofdata_to_platdata(struct udevice *dev) +{ +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct rockchip_timer_priv *priv = dev_get_priv(dev); + + priv->timer = (struct rk_timer *)devfdt_get_addr(dev); +#endif + + return 0; +} + +static int rockchip_timer_start(struct udevice *dev) +{ + struct rockchip_timer_priv *priv = dev_get_priv(dev); + const uint64_t reload_val = ~0uLL; + const uint32_t reload_val_l = reload_val & 0xffffffff; + const uint32_t reload_val_h = reload_val >> 32; + + /* disable timer and reset all control */ + writel(0, &priv->timer->timer_ctrl_reg); + /* write reload value */ + writel(reload_val_l, &priv->timer->timer_load_count0); + writel(reload_val_h, &priv->timer->timer_load_count1); + /* enable timer */ + writel(1, &priv->timer->timer_ctrl_reg); + + return 0; +} + +static int rockchip_timer_probe(struct udevice *dev) +{ +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct rockchip_timer_priv *priv = dev_get_priv(dev); + struct rockchip_timer_plat *plat = dev_get_platdata(dev); + + priv->timer = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]); + uc_priv->clock_rate = plat->dtd.clock_frequency; +#endif + + return rockchip_timer_start(dev); +} + +static const struct timer_ops rockchip_timer_ops = { + .get_count = rockchip_timer_get_count, +}; + +static const struct udevice_id rockchip_timer_ids[] = { + { .compatible = "rockchip,rk3368-timer" }, + {} +}; + +U_BOOT_DRIVER(arc_timer) = { + .name = "rockchip_rk3368_timer", + .id = UCLASS_TIMER, + .of_match = rockchip_timer_ids, + .probe = rockchip_timer_probe, + .ops = &rockchip_timer_ops, + .flags = DM_FLAG_PRE_RELOC, + .priv_auto_alloc_size = sizeof(struct rockchip_timer_priv), +#if CONFIG_IS_ENABLED(OF_PLATDATA) + .platdata_auto_alloc_size = sizeof(struct rockchip_timer_plat), +#endif + .ofdata_to_platdata = rockchip_clk_ofdata_to_platdata, +}; diff --git a/drivers/timer/timer-uclass.c b/drivers/timer/timer-uclass.c index ec10b28288..a84755f4c5 100644 --- a/drivers/timer/timer-uclass.c +++ b/drivers/timer/timer-uclass.c @@ -42,6 +42,7 @@ unsigned long notrace timer_get_rate(struct udevice *dev) static int timer_pre_probe(struct udevice *dev) { +#if !CONFIG_IS_ENABLED(OF_PLATDATA) struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); struct clk timer_clk; int err; @@ -56,6 +57,7 @@ static int timer_pre_probe(struct udevice *dev) } else uc_priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "clock-frequency", 0); +#endif return 0; } @@ -81,16 +83,18 @@ u64 timer_conv_64(u32 count) int notrace dm_timer_init(void) { - const void *blob = gd->fdt_blob; + __maybe_unused const void *blob = gd->fdt_blob; struct udevice *dev = NULL; - int node; + int node = -ENOENT; int ret; if (gd->timer) return 0; +#if !CONFIG_IS_ENABLED(OF_PLATDATA) /* Check for a chosen timer to be used for tick */ node = fdtdec_get_chosen_node(blob, "tick-timer"); +#endif if (node < 0) { /* No chosen timer, trying first available timer */ ret = uclass_first_device_err(UCLASS_TIMER, &dev); diff --git a/dts/Kconfig b/dts/Kconfig index 1bc9656fae..b4b7ddc144 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -32,6 +32,14 @@ config SPL_OF_CONTROL which is not enough to support device tree. Enable this option to allow such boards to be supported by U-Boot SPL. +config TPL_OF_CONTROL + bool "Enable run-time configuration via Device Tree in TPL" + depends on TPL && OF_CONTROL + help + Some boards use device tree in U-Boot but only have 4KB of SRAM + which is not enough to support device tree. Enable this option to + allow such boards to be supported by U-Boot TPL. + config OF_LIVE bool "Enable use of a live tree" depends on OF_CONTROL @@ -136,4 +144,25 @@ config SPL_OF_PLATDATA declarations for each node. See README.platdata for more information. +config TPL_OF_PLATDATA + bool "Generate platform data for use in TPL" + depends on TPL_OF_CONTROL + help + For very constrained SPL environments the overhead of decoding + device tree nodes and converting their contents into platform data + is too large. This overhead includes libfdt code as well as the + device tree contents itself. The latter is fairly compact, but the + former can add 3KB or more to a Thumb 2 Image. + + This option enables generation of platform data from the device + tree as C code. This code creates devices using U_BOOT_DEVICE() + declarations. The benefit is that it allows driver code to access + the platform data directly in C structures, avoidin the libfdt + overhead. + + This option works by generating C structure declarations for each + compatible string, then adding platform data and U_BOOT_DEVICE + declarations for each node. See README.platdata for more + information. + endmenu diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 9c419dee41..c9420b2d73 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -191,8 +191,6 @@ #define CONFIG_SYS_BOOTCOUNT_BE /* USB gadget RNDIS */ - -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif #ifdef CONFIG_NAND diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h index d9f05eb55d..9b14603918 100644 --- a/include/configs/am335x_igep003x.h +++ b/include/configs/am335x_igep003x.h @@ -123,7 +123,6 @@ #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(SPL),-(UBI)" /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* UBI configuration */ #define CONFIG_SPL_UBI 1 diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index b1e44bbbb4..62ab2d7227 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -246,8 +246,6 @@ /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifndef CONFIG_SPL_USBETH_SUPPORT #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 #endif diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h index 13ff2b277a..62af3fa9ff 100644 --- a/include/configs/am335x_sl50.h +++ b/include/configs/am335x_sl50.h @@ -78,8 +78,6 @@ #define CONFIG_BOOTCOUNT_AM33XX #define CONFIG_SYS_BOOTCOUNT_BE -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifndef CONFIG_SPL_USBETH_SUPPORT #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 #endif diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index aeba61ea59..0502b567e6 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -257,7 +257,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 60460c8105..e957a28b6b 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -305,6 +305,5 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif /* __CONFIG_H */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 6a35a0884f..b84f6e3480 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -71,8 +71,6 @@ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - /* SPL USB Support */ #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 29cbbabd1e..5c5d223e84 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -27,7 +27,6 @@ * SPL */ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_TEXT_BASE 0xA0000000 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 019006a84a..ee6ab41631 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -136,7 +136,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index db04662799..089b865ac2 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -189,7 +189,6 @@ #define CONFIG_SYS_MCKR_CSS 0x1302 #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 608be149a0..0cb8985982 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -180,7 +180,6 @@ #define CONFIG_SYS_MCKR_CSS 0x1302 #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/baltos.h b/include/configs/baltos.h index dbd933f30a..185c749d78 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -241,8 +241,6 @@ /* General network SPL, both CPSW and USB gadget RNDIS */ #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifdef CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_GPMC_PREFETCH diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 59530beeda..c824ebde27 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -344,8 +344,6 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_SYS_BOOTCOUNT_BE /* USB gadget RNDIS */ - -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif #ifdef CONFIG_NAND diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index f545a56d82..15c481d421 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -102,6 +102,5 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN /* General parts of the framework, required. */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif /* ! __BUR_AM335X_COMMON_H__ */ diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index d7606c7f99..fb3e67466e 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -127,8 +127,6 @@ #define CONFIG_BOOTCOUNT_AM33XX #define CONFIG_SYS_BOOTCOUNT_BE -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - /* NAND: device related configs */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index df81f7d78e..2287d5b6e4 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -97,7 +97,6 @@ #define CONFIG_SYS_I2C_EEPROM_BUS 0 /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* Network. */ #define CONFIG_PHY_ATHEROS diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 52b713d503..a94d55fa3a 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -259,7 +259,6 @@ #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index d43d90610b..bbc455a244 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -97,8 +97,6 @@ #define CONFIG_ENV_OFFSET (768 * 1024) #define CONFIG_ENV_SPI_MAX_HZ 48000000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x81200000\0" \ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 675e7a649e..c1f92edfa4 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -291,7 +291,6 @@ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_FOOTPRINT 32768 diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 31364c2533..235b7461f5 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -24,7 +24,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x0001ffff #define CONFIG_SYS_SPL_MALLOC_START 0x00040000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x0001ffff -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/orion5x/u-boot-spl.lds" #define CONFIG_SYS_UBOOT_BASE 0xfff90000 #define CONFIG_SYS_UBOOT_START 0x00800000 #define CONFIG_SYS_TEXT_BASE 0x00800000 diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 9c9681e8ac..c90cc329ac 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -48,7 +48,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* specific .lds file */ -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" /* Boot Argument Buffer Size */ /* memtest works on */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 9537112693..cdb3a374bc 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -24,7 +24,6 @@ * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 * or 64KB */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 #define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_STACK 0x0091FFB8 diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index be91dc27cd..d2fc81bfe0 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -261,7 +261,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_SIZE 0x20000 diff --git a/include/configs/kc1.h b/include/configs/kc1.h index 38c5862b72..36c01c0e05 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -88,8 +88,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - /* * Console */ diff --git a/include/configs/lion_rk3368.h b/include/configs/lion_rk3368.h new file mode 100644 index 0000000000..4118ffd65b --- /dev/null +++ b/include/configs/lion_rk3368.h @@ -0,0 +1,18 @@ +/* + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIGS_LION_RK3368_H +#define __CONFIGS_LION_RK3368_H + +#include + +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define KERNEL_LOAD_ADDR 0x280000 +#define DTB_LOAD_ADDR 0x5600000 +#define INITRD_LOAD_ADDR 0x5bf0000 +#define CONFIG_ENV_SIZE 0x2000 + +#endif diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 33b62cdca2..6ef7d63295 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_FSL_PBL_RCW \ board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 7c651e4efd..b934d10b47 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -52,7 +52,6 @@ unsigned long get_board_ddr_clk(void); board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg #endif #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 @@ -75,7 +74,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 0e5b004868..f5c3947e30 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -95,7 +95,6 @@ board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg #endif #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #ifdef CONFIG_SECURE_BOOT /* diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index f064d5c24a..6c74afac9f 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -66,7 +66,6 @@ /* SD boot SPL */ #ifdef CONFIG_SD_BOOT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0x10000000 @@ -98,7 +97,6 @@ #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PBL_PAD #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index e5159d8f1a..4cab7d9816 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -64,7 +64,6 @@ /* SD boot SPL */ #ifdef CONFIG_SD_BOOT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -104,7 +103,6 @@ #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PBL_PAD #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 1ec6cb2cde..393112f50d 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -233,7 +233,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 0x16000 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index 7c28a94d92..0d6977c707 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -214,7 +214,6 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 #define CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 49b9c8b32a..7047e3f545 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -284,7 +284,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 926a8f6526..75baccc770 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -235,8 +235,6 @@ /* SPL part */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" - #ifdef CONFIG_SYS_FLASH_BASE # define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE #endif diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 3b776b1d9f..2bb24a1545 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -26,7 +26,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_TEXT_BASE 0x87dc0000 diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 041dcde38e..804b9e199c 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -46,7 +46,6 @@ /* SPL */ #define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" /* Memory sizes */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 6ea2b5e7f3..0085559ef9 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -307,7 +307,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_FOOTPRINT 32768 diff --git a/include/configs/origen.h b/include/configs/origen.h index c363653537..69f6930c54 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -95,7 +95,6 @@ #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 112f9b8285..f678b2944d 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -117,8 +117,6 @@ /* CPU */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifdef CONFIG_SPI_BOOT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 4eecca1615..242a13912b 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -194,6 +194,4 @@ /* CPSW support */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #endif /* ! __CONFIG_PENGWYN_H */ diff --git a/include/configs/pepper.h b/include/configs/pepper.h index 1a6981a52e..7ef25294c1 100644 --- a/include/configs/pepper.h +++ b/include/configs/pepper.h @@ -81,6 +81,5 @@ #define CONFIG_PHY_RESET_DELAY 1000 /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif /* __CONFIG_PEPPER_H */ diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 4e64eac422..c8ab542105 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -141,7 +141,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index 3ee9abd38d..8a019361be 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -26,7 +26,7 @@ #define CONFIG_SYS_NS16550_MEM32 -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x60000000 once return from SPL */ #define CONFIG_SYS_TEXT_BASE 0x60000000 #else diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 488d67924a..ade6caf624 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -24,7 +24,7 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SYS_NS16550_MEM32 -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x0 once return from SPL */ #define CONFIG_SYS_TEXT_BASE 0x00000000 #else diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index b0c858c693..a89c69a72b 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -21,12 +21,20 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT +#define COUNTER_FREQUENCY 24000000 + +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_SYS_TEXT_BASE 0x00200000 #define CONFIG_SYS_INIT_SP_ADDR 0x00300000 #define CONFIG_SYS_LOAD_ADDR 0x00280000 +#define CONFIG_SPL_TEXT_BASE 0x00000000 +#define CONFIG_SPL_MAX_SIZE 0x40000 +#define CONFIG_SPL_BSS_START_ADDR 0x400000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x20000 + #define CONFIG_BOUNCE_BUFFER #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rock.h b/include/configs/rock.h index e998ec5f03..6b0788be9d 100644 --- a/include/configs/rock.h +++ b/include/configs/rock.h @@ -12,7 +12,7 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if defined(ROCKCHIP_BACK_TO_BROM) /* SPL @ 32k for 34k * u-boot directly after @ 68k for 400k or so * ENV @ 992k diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h index 29a492dc55..b3986c28af 100644 --- a/include/configs/rockchip-common.h +++ b/include/configs/rockchip-common.h @@ -46,7 +46,7 @@ #endif -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) /* SPL @ 32k for 34k * u-boot directly after @ 68k for 400k or so * ENV @ 992k diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 13d454f18a..72beb25304 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -77,7 +77,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index cc12521577..05600c81ff 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -87,7 +87,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index d10dc3e2cb..29b7e8b50a 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -118,7 +118,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index f0c80260d0..c8462b0b64 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index ab858cecfa..fc16ed0420 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -74,7 +74,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 58b72812ed..5ed46588dd 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -119,8 +119,6 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_SPL_NAND_AM33XX_BCH #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 5b5046873b..fe24b3a160 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -219,7 +219,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SYS_USE_NANDFLASH 1 diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 96048f5d40..978fb24f39 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -78,7 +78,6 @@ #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 34f6d8ad72..2306e7cdb9 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -85,8 +85,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 07c7ffd7f2..212862acd1 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -202,10 +202,6 @@ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#ifndef CONFIG_ARM64 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" -#endif - #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 419f683277..54223c475a 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -170,7 +170,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 253270e176..d47dc8bba9 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -240,7 +240,6 @@ #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 4d9ec790fd..129ae4c466 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -149,7 +149,6 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index bba10ec001..3da774f9c5 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -118,8 +118,6 @@ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_SYS_TEXT_BASE 0x80800000 #define CONFIG_DRIVER_TI_EMAC diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 393d867a73..938136c946 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -60,7 +60,6 @@ /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (64 << 20)) diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index acfac24ebe..018e4c2512 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -139,7 +139,6 @@ * So moving TEXT_BASE down to non-HS limit. */ #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 4c3a2766ec..73c1d8f66e 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -100,7 +100,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40300000 #endif -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index fbdd43ac72..77f8cbde27 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -259,7 +259,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index bab7fdf93c..fb7385649e 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -21,7 +21,6 @@ * SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x10002300 #define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */ diff --git a/include/configs/x600.h b/include/configs/x600.h index 6778825397..1255edd5bd 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -237,7 +237,6 @@ #define CONFIG_SPL_TEXT_BASE 0xd2800b00 #define CONFIG_SPL_MAX_SIZE (CONFIG_SRAM_SIZE - 0xb00) #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear" -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 66bc508b9d..6359587738 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -319,8 +319,6 @@ /* SPL part */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds" - /* MMC support */ #ifdef CONFIG_MMC_SDHCI_ZYNQ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/dt-bindings/memory/rk3368-dmc.h b/include/dt-bindings/memory/rk3368-dmc.h new file mode 100644 index 0000000000..b06ffde718 --- /dev/null +++ b/include/dt-bindings/memory/rk3368-dmc.h @@ -0,0 +1,30 @@ +#ifndef DT_BINDINGS_RK3368_DMC_H +#define DT_BINDINGS_RK3368_DMC_H + +#define DMC_MSCH_CBDR 0x0 +#define DMC_MSCH_CBRD 0x1 +#define DMC_MSCH_CRBD 0x2 + +#define DDR3_800D 0 +#define DDR3_800E 1 +#define DDR3_1066E 2 +#define DDR3_1066F 3 +#define DDR3_1066G 4 +#define DDR3_1333F 5 +#define DDR3_1333G 6 +#define DDR3_1333H 7 +#define DDR3_1333J 8 +#define DDR3_1600G 9 +#define DDR3_1600H 10 +#define DDR3_1600J 11 +#define DDR3_1600K 12 +#define DDR3_1866J 13 +#define DDR3_1866K 14 +#define DDR3_1866L 15 +#define DDR3_1866M 16 +#define DDR3_2133K 17 +#define DDR3_2133L 18 +#define DDR3_2133M 19 +#define DDR3_2133N 20 + +#endif diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index 486fb94c57..fbfc7188b8 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -51,12 +51,25 @@ #define _IS_SPL 1 #endif +#ifdef CONFIG_TPL_BUILD +#define _IS_TPL 1 +#endif + +#if defined(CONFIG_TPL_BUILD) +#define config_val(cfg) _config_val(_IS_TPL, cfg) +#define _config_val(x, cfg) __config_val(x, cfg) +#define __config_val(x, cfg) ___config_val(__ARG_PLACEHOLDER_##x, cfg) +#define ___config_val(arg1_or_junk, cfg) \ + ____config_val(arg1_or_junk CONFIG_TPL_##cfg, CONFIG_##cfg) +#define ____config_val(__ignored, val, ...) val +#else #define config_val(cfg) _config_val(_IS_SPL, cfg) #define _config_val(x, cfg) __config_val(x, cfg) #define __config_val(x, cfg) ___config_val(__ARG_PLACEHOLDER_##x, cfg) #define ___config_val(arg1_or_junk, cfg) \ ____config_val(arg1_or_junk CONFIG_SPL_##cfg, CONFIG_##cfg) #define ____config_val(__ignored, val, ...) val +#endif /* * CONFIG_VAL(FOO) evaluates to the value of diff --git a/include/spl.h b/include/spl.h index ffadce93c7..ce4cf0abbe 100644 --- a/include/spl.h +++ b/include/spl.h @@ -268,4 +268,14 @@ int spl_mmc_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev); void bl31_entry(void); + +/** + * board_return_to_bootrom - allow for boards to continue with the boot ROM + * + * If a board (e.g. the Rockchip RK3368 boards) provide some + * supporting functionality for SPL in their boot ROM and the SPL + * stage wants to return to the ROM code to continue booting, boards + * can implement 'board_return_to_bootrom'. + */ +void board_return_to_bootrom(void); #endif diff --git a/lib/Kconfig b/lib/Kconfig index 2f5a210ad4..81636172bc 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -61,6 +61,15 @@ config SPL_TINY_MEMSET size-constrained envrionments even this may be too big. Enable this option to reduce code size slightly at the cost of some speed. +config TPL_TINY_MEMSET + bool "Use a very small memset() in TPL" + help + The faster memset() is the arch-specific one (if available) enabled + by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get + better performance by writing a word at a time. But in very + size-constrained envrionments even this may be too big. Enable this + option to reduce code size slightly at the cost of some speed. + config RBTREE bool diff --git a/lib/Makefile b/lib/Makefile index eacc7d6485..2eef1eb80e 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,11 +49,11 @@ obj-$(CONFIG_RSA) += rsa/ obj-$(CONFIG_SHA1) += sha1.o obj-$(CONFIG_SHA256) += sha256.o -obj-$(CONFIG_SPL_SAVEENV) += qsort.o -obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/ -ifneq ($(CONFIG_SPL_BUILD)$(CONFIG_SPL_OF_PLATDATA),yy) -obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o -obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec.o +obj-$(CONFIG_$(SPL_TPL_)SAVEENV) += qsort.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/ +ifneq ($(CONFIG_$(SPL_TPL_)BUILD)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy) +obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += fdtdec_common.o +obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += fdtdec.o endif ifdef CONFIG_SPL_BUILD diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index ac3c2c7f13..167b2d9d29 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -98,15 +98,22 @@ endif u-boot-spl-init := $(head-y) u-boot-spl-main := $(libs-y) -ifdef CONFIG_SPL_OF_PLATDATA +ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA u-boot-spl-platdata := $(obj)/dts/dt-platdata.o endif # Linker Script -ifdef CONFIG_SPL_LDSCRIPT +# First test whether there's a linker-script for the specific stage defined... +ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),) +# need to strip off double quotes +LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%)) +else +# ...then fall back to the generic SPL linker-script +ifneq ($(CONFIG_SPL_LDSCRIPT),) # need to strip off double quotes LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%)) endif +endif ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds @@ -202,7 +209,7 @@ cmd_cat = cat $(filter-out $(PHONY), $^) > $@ quiet_cmd_copy = COPY $@ cmd_copy = cp $< $@ -ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy) +ifeq ($(CONFIG_$(SPL_TPL_)OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy) $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \ $(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \ $(obj)/$(SPL_BIN).dtb FORCE @@ -293,9 +300,15 @@ LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker) +# First try the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL) +ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),) +LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE) +else +# And then fall back to just testing for SPL_TEXT_BASE, even if in TPL mode ifneq ($(CONFIG_SPL_TEXT_BASE),) LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) endif +endif MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index f509984d77..d9aeb62a02 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2207,7 +2207,6 @@ CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_JR0_LIODN_NS CONFIG_SPL_JR0_LIODN_S -CONFIG_SPL_LDSCRIPT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MAX_FOOTPRINT CONFIG_SPL_MAX_PEB_SIZE @@ -4909,7 +4908,6 @@ CONFIG_TI_KEYSTONE_SERDES CONFIG_TI_KSNAV CONFIG_TI_SPI_MMAP CONFIG_TMU_TIMER -CONFIG_TPL_DRIVERS_MISC_SUPPORT CONFIG_TPL_PAD_TO CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_TPS6586X_POWER diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 63d91e22ed..8564bedd1a 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -141,7 +141,11 @@ if $scm_only; then fi if test -e include/config/auto.conf; then - . include/config/auto.conf + # We are interested only in CONFIG_LOCALVERSION and + # CONFIG_LOCALVERSION_AUTO, so extract these in a safe + # way (i.e. w/o sourcing auto.conf) + CONFIG_LOCALVERSION=`cat include/config/auto.conf | awk -F '=' '/^CONFIG_LOCALVERSION=/ {print $2}'` + CONFIG_LOCALVERSION_AUTO=`cat include/config/auto.conf | awk -F '=' '/^CONFIG_LOCALVERSION_AUTO=/ {print $2}'` else echo "Error: kernelrelease not valid - run 'make prepare' to update it" exit 1 diff --git a/tools/rkcommon.c b/tools/rkcommon.c index 25b034028b..04e8272fd5 100644 --- a/tools/rkcommon.c +++ b/tools/rkcommon.c @@ -77,6 +77,7 @@ static struct spl_info spl_infos[] = { { "rk322x", "RK32", 0x8000 - 0x1000, false, false }, { "rk3288", "RK32", 0x8000, false, false }, { "rk3328", "RK32", 0x8000 - 0x1000, false, false }, + { "rk3368", "RK33", 0x8000 - 0x1000, false, true }, { "rk3399", "RK33", 0x30000 - 0x2000, false, true }, { "rv1108", "RK11", 0x1800, false, false}, };