From: Marek Vasut <marex@denx.de>
Date: Fri, 17 Jul 2015 02:24:18 +0000 (+0200)
Subject: ddr: altera: Internal rw_mgr_mem_calibrate_vfifo() cleanup part 6
X-Git-Tag: v2015.10-rc2~285
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c336ca3e5b62c275d15cef9cdf22eacbdef4405a;p=u-boot

ddr: altera: Internal rw_mgr_mem_calibrate_vfifo() cleanup part 6

This is kind of microseries-within-series indent cleanup.
It is clear that the read_group and write_group variables
have the same value, to just make them into one variable
called rw_group. While doing this, constify the variables
as they are constant.

It is likely that this patch has checkpatch warnings, but
for the sake of not breaking the code, these are ignored.

No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
---

diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 03cfefda1c..62183414aa 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -2201,30 +2201,25 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn,
  *   - DQS input phase  and DQS input delay (DQ/DQS Centering)
  *  - we also do a per-bit deskew on the DQ lines.
  */
-static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group,
-					   uint32_t test_bgn)
+static int rw_mgr_mem_calibrate_vfifo(const u32 rw_group, const u32 test_bgn)
 {
 	uint32_t p, d, rank_bgn, sr;
 	uint32_t dtaps_per_ptap;
 	uint32_t bit_chk;
 	uint32_t grp_calibrated;
-	uint32_t write_group, write_test_bgn;
 	uint32_t failed_substage;
 
-	debug("%s:%d: %u %u\n", __func__, __LINE__, read_group, test_bgn);
+	debug("%s:%d: %u %u\n", __func__, __LINE__, rw_group, test_bgn);
 
 	/* update info for sims */
 	reg_file_set_stage(CAL_STAGE_VFIFO);
 
-	write_group = read_group;
-	write_test_bgn = test_bgn;
-
 	/* USER Determine number of delay taps for each phase tap */
 	dtaps_per_ptap = DIV_ROUND_UP(IO_DELAY_PER_OPA_TAP,
 				      IO_DELAY_PER_DQS_EN_DCHAIN_TAP) - 1;
 
 	/* update info for sims */
-	reg_file_set_group(read_group);
+	reg_file_set_group(rw_group);
 
 	reg_file_set_sub_stage(CAL_SUBSTAGE_GUARANTEED_READ);
 	failed_substage = CAL_SUBSTAGE_GUARANTEED_READ;
@@ -2232,22 +2227,22 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group,
 	for (d = 0; d <= dtaps_per_ptap; d += 2) {
 		/*
 		 * In RLDRAMX we may be messing the delay of pins in
-		 * the same write group but outside of the current read
-		 * the group, but that's ok because we haven't calibrated
+		 * the same write rw_group but outside of the current read
+		 * the rw_group, but that's ok because we haven't calibrated
 		 * output side yet.
 		 */
 		if (d > 0) {
 			scc_mgr_apply_group_all_out_delay_add_all_ranks(
-								write_group, d);
+								rw_group, d);
 		}
 
 		for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX; p++) {
 			/* set a particular dqdqs phase */
-			scc_mgr_set_dqdqs_output_phase_all_ranks(read_group, p);
+			scc_mgr_set_dqdqs_output_phase_all_ranks(rw_group, p);
 
 			debug_cond(DLEVEL == 1,
 				   "%s:%d calibrate_vfifo: g=%u p=%u d=%u\n",
-				   __func__, __LINE__, read_group, p, d);
+				   __func__, __LINE__, rw_group, p, d);
 
 			/*
 			 * Load up the patterns used by read calibration
@@ -2256,17 +2251,17 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group,
 			rw_mgr_mem_calibrate_read_load_patterns(0, 1);
 			if (!(gbl->phy_debug_mode_flags & PHY_DEBUG_DISABLE_GUARANTEED_READ)) {
 				if (!rw_mgr_mem_calibrate_read_test_patterns_all_ranks
-								(read_group, 1, &bit_chk)) {
+								(rw_group, 1, &bit_chk)) {
 					debug_cond(DLEVEL == 1,
 						   "%s:%d Guaranteed read test failed: g=%u p=%u d=%u\n",
-						   __func__, __LINE__, read_group, p, d);
+						   __func__, __LINE__, rw_group, p, d);
 					break;
 				}
 			}
 
 			/* case:56390 */
 			if (!rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay
-			    (write_group, read_group, test_bgn)) {
+			    (rw_group, rw_group, test_bgn)) {
 				failed_substage = CAL_SUBSTAGE_DQS_EN_PHASE;
 				continue;
 			}
@@ -2291,9 +2286,8 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group,
 				 * FOM, now - do it then.
 				 */
 				if (rw_mgr_mem_calibrate_vfifo_center(rank_bgn,
-							write_group, read_group,
+							rw_group, rw_group,
 							test_bgn, 1, 0))
-
 					continue;
 
 				grp_calibrated = 0;
@@ -2306,7 +2300,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group,
 	}
 
 	/* Calibration Stage 1 failed. */
-	set_failing_group_stage(write_group, CAL_STAGE_VFIFO, failed_substage);
+	set_failing_group_stage(rw_group, CAL_STAGE_VFIFO, failed_substage);
 	return 0;
 
 	/* Calibration Stage 1 completed OK. */
@@ -2317,7 +2311,7 @@ cal_done_ok:
 	 * first case).
 	 */
 	if (d > 2)
-		scc_mgr_zero_group(write_group, 1);
+		scc_mgr_zero_group(rw_group, 1);
 
 	return 1;
 }