From: Scott Wood Date: Fri, 24 Oct 2008 21:20:43 +0000 (-0500) Subject: NAND: sync with 2.6.27 X-Git-Tag: v2009.01-rc1~114 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c45912d8abc52de796b9059a58faf7c4166eab58;p=u-boot NAND: sync with 2.6.27 This brings the core NAND code up to date with the Linux kernel. Since there were several drivers in Linux as of the last update that are not in u-boot, I'm not bringing over new drivers that have been added since in the absence of an interested party. I did not update OneNAND since it was recently synced by Kyungmin Park, and I'm not sure exactly what the common ancestor is. Signed-off-by: Scott Wood --- diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 4cba8100a5..e9dc4d1fd5 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -15,8 +15,6 @@ * converted to the generic Reed-Solomon library by Thomas Gleixner * * Interface to generic NAND code for M-Systems DiskOnChip devices - * - * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $ */ #include @@ -58,13 +56,6 @@ static unsigned long __initdata doc_locations[] = { 0xe0000, 0xe2000, 0xe4000, 0xe6000, 0xe8000, 0xea000, 0xec000, 0xee000, #endif /* CONFIG_MTD_DOCPROBE_HIGH */ -#elif defined(__PPC__) - 0xe4000000, -#elif defined(CONFIG_MOMENCO_OCELOT) - 0x2f000000, - 0xff000000, -#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) - 0xff000000, #else #warning Unknown architecture for DiskOnChip. No default probe locations defined #endif @@ -229,7 +220,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) } } /* If the parity is wrong, no rescue possible */ - return parity ? -1 : nerr; + return parity ? -EBADMSG : nerr; } static void DoC_Delay(struct doc_priv *doc, unsigned short cycles) @@ -1044,7 +1035,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); else WriteDOC(DOC_ECC_DIS, docptr, ECCConf); - if (no_ecc_failures && (ret == -1)) { + if (no_ecc_failures && (ret == -EBADMSG)) { printk(KERN_ERR "suppressing ECC failure\n"); ret = 0; } @@ -1139,9 +1130,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio goto out; mh = (struct NFTLMediaHeader *)buf; - mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); - mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); - mh->FormattedSize = le32_to_cpu(mh->FormattedSize); + le16_to_cpus(&mh->NumEraseUnits); + le16_to_cpus(&mh->FirstPhysicalEUN); + le32_to_cpus(&mh->FormattedSize); printk(KERN_INFO " DataOrgID = %s\n" " NumEraseUnits = %d\n" @@ -1249,12 +1240,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); mh = (struct INFTLMediaHeader *)buf; - mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); - mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); - mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions); - mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits); - mh->FormatFlags = le32_to_cpu(mh->FormatFlags); - mh->PercentUsed = le32_to_cpu(mh->PercentUsed); + le32_to_cpus(&mh->NoOfBootImageBlocks); + le32_to_cpus(&mh->NoOfBinaryPartitions); + le32_to_cpus(&mh->NoOfBDTLPartitions); + le32_to_cpus(&mh->BlockMultiplierBits); + le32_to_cpus(&mh->FormatFlags); + le32_to_cpus(&mh->PercentUsed); printk(KERN_INFO " bootRecordID = %s\n" " NoOfBootImageBlocks = %d\n" @@ -1291,12 +1282,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti /* Scan the partitions */ for (i = 0; (i < 4); i++) { ip = &(mh->Partitions[i]); - ip->virtualUnits = le32_to_cpu(ip->virtualUnits); - ip->firstUnit = le32_to_cpu(ip->firstUnit); - ip->lastUnit = le32_to_cpu(ip->lastUnit); - ip->flags = le32_to_cpu(ip->flags); - ip->spareUnits = le32_to_cpu(ip->spareUnits); - ip->Reserved0 = le32_to_cpu(ip->Reserved0); + le32_to_cpus(&ip->virtualUnits); + le32_to_cpus(&ip->firstUnit); + le32_to_cpus(&ip->lastUnit); + le32_to_cpus(&ip->flags); + le32_to_cpus(&ip->spareUnits); + le32_to_cpus(&ip->Reserved0); printk(KERN_INFO " PARTITION[%d] ->\n" " virtualUnits = %d\n" diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index fe34a4864b..4069ab1278 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -7,7 +7,7 @@ * Basic support for AG-AND chips is provided. * * Additional technical information is available on - * http://www.linux-mtd.infradead.org/tech/nand.html + * http://www.linux-mtd.infradead.org/doc/nand.html * * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * 2002-2006 Thomas Gleixner (tglx@linutronix.de) @@ -24,6 +24,7 @@ * if we have HW ecc support. * The AG-AND chips have nice features for speed improvement, * which are not supported yet. Read / program 4 pages in one go. + * BBT table is not serialized, has to be fixed * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -128,7 +129,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, static int nand_wait(struct mtd_info *mtd, struct nand_chip *this); /* - * For devices which display every fart in the system on a seperate LED. Is + * For devices which display every fart in the system on a separate LED. Is * compiled away when LED support is disabled. */ /* XXX U-BOOT XXX */ @@ -412,6 +413,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) /* We write two bytes, so we dont have to mess with 16 bit * access */ + nand_get_device(chip, mtd, FL_WRITING); ofs += mtd->oobsize; chip->ops.len = chip->ops.ooblen = 2; chip->ops.datbuf = NULL; @@ -419,9 +421,11 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->ops.ooboffs = chip->badblockpos & ~0x01; ret = nand_do_write_oob(mtd, ofs, &chip->ops); + nand_release_device(mtd); } if (!ret) mtd->ecc_stats.badblocks++; + return ret; } @@ -911,7 +915,88 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat == -1) + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} + +/** + * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @dataofs offset of requested data within the page + * @readlen data length + * @buf: buffer to store read data + */ +static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi) +{ + int start_step, end_step, num_steps; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *p; + int data_col_addr, i, gaps = 0; + int datafrag_len, eccfrag_len, aligned_len, aligned_pos; + int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; + + /* Column address wihin the page aligned to ECC size (256bytes). */ + start_step = data_offs / chip->ecc.size; + end_step = (data_offs + readlen - 1) / chip->ecc.size; + num_steps = end_step - start_step + 1; + + /* Data size aligned to ECC ecc.size*/ + datafrag_len = num_steps * chip->ecc.size; + eccfrag_len = num_steps * chip->ecc.bytes; + + data_col_addr = start_step * chip->ecc.size; + /* If we read not a page aligned data */ + if (data_col_addr != 0) + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); + + p = bufpoi + data_col_addr; + chip->read_buf(mtd, p, datafrag_len); + + /* Calculate ECC */ + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) + chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); + + /* The performance is faster if to position offsets + according to ecc.pos. Let make sure here that + there are no gaps in ecc positions */ + for (i = 0; i < eccfrag_len - 1; i++) { + if (eccpos[i + start_step * chip->ecc.bytes] + 1 != + eccpos[i + start_step * chip->ecc.bytes + 1]) { + gaps = 1; + break; + } + } + if (gaps) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + } else { + /* send the command to read the particular ecc bytes */ + /* take care about buswidth alignment in read_buf */ + aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1); + aligned_len = eccfrag_len; + if (eccpos[start_step * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1); + chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); + } + + for (i = 0; i < eccfrag_len; i++) + chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]]; + + p = bufpoi + data_col_addr; + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { + int stat; + + stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -996,7 +1081,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, oob, eccbytes); stat = chip->ecc.correct(mtd, p, oob, NULL); - if (stat == -1) + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -1116,6 +1201,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Now read the page into the buffer */ if (unlikely(ops->mode == MTD_OOB_RAW)) ret = chip->ecc.read_page_raw(mtd, chip, bufpoi); + else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) + ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else ret = chip->ecc.read_page(mtd, chip, bufpoi); if (ret < 0) @@ -1123,7 +1210,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Transfer not aligned data */ if (!aligned) { - chip->pagebuf = realpage; + if (!NAND_SUBPAGE_READ(chip) && !oob) + chip->pagebuf = realpage; memcpy(buf, chip->buffers->databuf + col, bytes); } @@ -2193,13 +2281,14 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, erase_exit: ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; - /* Do call back function */ - if (!ret) - mtd_erase_callback(instr); /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + /* * If BBT requires refresh and erase was successful, rewrite any * selected bad block tables @@ -2356,6 +2445,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, { struct nand_flash_dev *type = NULL; int i, dev_id, maf_idx; + int tmp_id, tmp_manf; /* Select the device */ chip->select_chip(mtd, 0); @@ -2367,6 +2457,26 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, *maf_id = chip->read_byte(mtd); dev_id = chip->read_byte(mtd); + /* Try again to make sure, as some systems the bus-hold or other + * interface concerns can cause random data which looks like a + * possibly credible NAND flash to appear. If the two results do + * not match, ignore the device completely. + */ + + chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); + + /* Read manufacturer and device IDs */ + + tmp_manf = chip->read_byte(mtd); + tmp_id = chip->read_byte(mtd); + + if (tmp_manf != *maf_id || tmp_id != dev_id) { + printk(KERN_INFO "%s: second ID read did not match " + "%02x,%02x against %02x,%02x\n", __func__, + *maf_id, dev_id, tmp_manf, tmp_id); + return ERR_PTR(-ENODEV); + } + /* Lookup the flash id */ for (i = 0; nand_flash_ids[i].name != NULL; i++) { if (dev_id == nand_flash_ids[i].id) { @@ -2630,6 +2740,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.calculate = nand_calculate_ecc; chip->ecc.correct = nand_correct_data; chip->ecc.read_page = nand_read_page_swecc; + chip->ecc.read_subpage = nand_read_subpage; chip->ecc.write_page = nand_write_page_swecc; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index b3b740da64..d68a315f19 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -6,8 +6,6 @@ * * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) * - * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index ee1f6cc8a8..94923b9524 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -9,8 +9,6 @@ * * Copyright (C) 2006 Thomas Gleixner * - * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $ - * * This file is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 or (at your option) any @@ -47,7 +45,8 @@ #include #endif -#include +#include +#include /* * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(), @@ -206,7 +205,7 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat, if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) return 1; - return -1; + return -EBADMSG; } /* XXX U-BOOT XXX */ diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 2ff75c94e9..077c3051bc 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -3,8 +3,6 @@ * * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) * - * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -142,5 +140,6 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_STMICRO, "ST Micro"}, {NAND_MFR_HYNIX, "Hynix"}, {NAND_MFR_MICRON, "Micron"}, + {NAND_MFR_AMD, "AMD"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index c22a8a8029..9b7bf3aa3b 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1428,7 +1428,7 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", - (unsigned int)instr->addr, (unsigned int)ins tr->len); + (unsigned int)instr->addr, (unsigned int)instr->len); block_size = (1 << this->erase_shift); diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index d1ded51d7c..32acb6ce9d 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -1,6 +1,4 @@ /* - * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $ - * * (C) 2003 David Woodhouse * * Interface to Linux block layer for MTD 'translation layers'. diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h index 12de2845a3..ba29d53ec6 100644 --- a/include/linux/mtd/doc2000.h +++ b/include/linux/mtd/doc2000.h @@ -6,8 +6,6 @@ * Copyright (C) 2002-2003 Greg Ungerer * Copyright (C) 2002-2003 SnapGear Inc * - * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $ - * * Released under GPL */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 55d33dd11e..354e3a0bc4 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -1,6 +1,4 @@ /* - * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $ - * * Copyright (C) 1999-2003 David Woodhouse et al. * * Released under GPL @@ -132,7 +130,7 @@ struct mtd_info { u_int32_t oobavail; /* Available OOB bytes per block */ /* Kernel-only stuff starts here. */ - char *name; + const char *name; int index; /* ecc layout structure pointer - read only ! */ @@ -144,18 +142,36 @@ struct mtd_info { int numeraseregions; struct mtd_erase_region_info *eraseregions; + /* + * Erase is an asynchronous operation. Device drivers are supposed + * to call instr->callback() whenever the operation completes, even + * if it completes with a failure. + * Callers are supposed to pass a callback function and wait for it + * to be called before writing to the block. + */ int (*erase) (struct mtd_info *mtd, struct erase_info *instr); /* This stuff for eXecute-In-Place */ - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); + /* phys is optional and may be set to NULL */ + int (*point) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, phys_addr_t *phys); /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ - void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); + void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + /* In blackbox flight recorder like scenarios we want to make successful + writes in interrupt context. panic_write() is only intended to be + called when its known the kernel is about to panic and we need the + write to succeed. Since the kernel is not going to be running for much + longer, this function can break locks and delay to ensure the write + succeeds (but not sleep). */ + + int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + int (*read_oob) (struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); int (*write_oob) (struct mtd_info *mtd, loff_t to, @@ -274,7 +290,11 @@ static inline void mtd_erase_callback(struct erase_info *instr) printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ -#define MTDDEBUG(n, args...) do { } while(0) +#define MTDDEBUG(n, args...) \ + do { \ + if (0) \ + printk(KERN_INFO args); \ + } while(0) #endif /* CONFIG_MTD_DEBUG */ #endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7ac72de95e..39f8aec675 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1,12 +1,10 @@ /* * linux/include/linux/mtd/nand.h * - * Copyright (c) 2000 David Woodhouse + * Copyright (c) 2000 David Woodhouse * Steven J. Hill * Thomas Gleixner * - * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -190,6 +188,9 @@ typedef enum { #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) +/* Large page NAND with SOFT_ECC should support subpage reads */ +#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \ + && (chip->page_shift > 9)) /* Mask to zero out the chip options, which come from the id table */ #define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) @@ -278,6 +279,10 @@ struct nand_ecc_ctrl { int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf); + int (*read_subpage)(struct mtd_info *mtd, + struct nand_chip *chip, + uint32_t offs, uint32_t len, + uint8_t *buf); void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf); @@ -435,6 +440,7 @@ struct nand_chip { #define NAND_MFR_STMICRO 0x20 #define NAND_MFR_HYNIX 0xad #define NAND_MFR_MICRON 0x2c +#define NAND_MFR_AMD 0x01 /** * struct nand_flash_dev - NAND Flash Device ID Structure diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h index 12c5bc342e..090da50542 100644 --- a/include/linux/mtd/nand_ecc.h +++ b/include/linux/mtd/nand_ecc.h @@ -3,8 +3,6 @@ * * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * - * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h index 6731a16e7d..fe22e0dceb 100644 --- a/include/linux/mtd/nftl.h +++ b/include/linux/mtd/nftl.h @@ -1,6 +1,4 @@ /* - * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $ - * * (C) 1999-2003 David Woodhouse */ @@ -43,6 +41,11 @@ struct NFTLrecord { int NFTL_mount(struct NFTLrecord *s); int NFTL_formatblock(struct NFTLrecord *s, int block); +int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + #ifndef NFTL_MAJOR #define NFTL_MAJOR 93 #endif diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 420eb140a3..4467c2bb2d 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -51,6 +51,7 @@ struct onenand_bufferram { * @param page_shift [INTERN] number of address bits in a page * @param ppb_shift [INTERN] number of address bits in a pages per block * @param page_mask [INTERN] a page per block mask + * @param writesize [INTERN] a real page size * @param bufferam_index [INTERN] BufferRAM index * @param bufferam [INTERN] BufferRAM info * @param readw [REPLACEABLE] hardware specific function for read short diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 6a8aa28b1b..a245e14bf9 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -67,12 +67,16 @@ /* * Device ID Register F001h (R) */ +#define ONENAND_DEVICE_DENSITY_MASK (0xf) #define ONENAND_DEVICE_DENSITY_SHIFT (4) #define ONENAND_DEVICE_IS_DDP (1 << 3) #define ONENAND_DEVICE_IS_DEMUX (1 << 2) #define ONENAND_DEVICE_VCC_MASK (0x3) #define ONENAND_DEVICE_DENSITY_512Mb (0x002) +#define ONENAND_DEVICE_DENSITY_1Gb (0x003) +#define ONENAND_DEVICE_DENSITY_2Gb (0x004) +#define ONENAND_DEVICE_DENSITY_4Gb (0x005) /* * Version ID Register F002h (R) @@ -110,6 +114,8 @@ #define ONENAND_CMD_READOOB (0x13) #define ONENAND_CMD_PROG (0x80) #define ONENAND_CMD_PROGOOB (0x1A) +#define ONENAND_CMD_2X_PROG (0x7D) +#define ONENAND_CMD_2X_CACHE_PROG (0x7F) #define ONENAND_CMD_UNLOCK (0x23) #define ONENAND_CMD_LOCK (0x2A) #define ONENAND_CMD_LOCK_TIGHT (0x2C)