From: Marek Vasut <marek.vasut@gmail.com>
Date: Wed, 19 Jan 2011 04:40:36 +0000 (+0000)
Subject: MX51EVK: Use SWx macros in PMIC init
X-Git-Tag: v2011.03-rc1~2^2~39
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c4a3c7442bfcd226da8fe8747c3d7141fc531348;p=u-boot

MX51EVK: Use SWx macros in PMIC init

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---

diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 7c50c54cd4..02a765dcfb 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -198,17 +198,17 @@ static void power_init(void)
 
 	/* Set core voltage to 1.1V */
 	val = pmic_reg_read(REG_SW_0);
-	val = (val & (~0x1F)) | 0x14;
+	val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
 	pmic_reg_write(REG_SW_0, val);
 
 	/* Setup VCC (SW2) to 1.25 */
 	val = pmic_reg_read(REG_SW_1);
-	val = (val & (~0x1F)) | 0x1A;
+	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 	pmic_reg_write(REG_SW_1, val);
 
 	/* Setup 1V2_DIG1 (SW3) to 1.25 */
 	val = pmic_reg_read(REG_SW_2);
-	val = (val & (~0x1F)) | 0x1A;
+	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 	pmic_reg_write(REG_SW_2, val);
 	udelay(50);