From: Baruch Siach Date: Sun, 3 Jun 2018 13:19:31 +0000 (+0300) Subject: doc: cmd: bubt: drop duplicated text X-Git-Tag: v2018.07-rc2~66 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c511147cf43e8f9dc61c6fd0dd103487786e7954;p=u-boot doc: cmd: bubt: drop duplicated text This commit removes text that is exact duplicated of the text above. Cc: Konstantin Porotchkin Signed-off-by: Baruch Siach Reviewed-by: Stefan Roese --- diff --git a/doc/mvebu/cmd/bubt.txt b/doc/mvebu/cmd/bubt.txt index 6f9f525936..a539c15bcd 100644 --- a/doc/mvebu/cmd/bubt.txt +++ b/doc/mvebu/cmd/bubt.txt @@ -44,15 +44,6 @@ Notes: CONFIG_SYS_MMC_ENV_PART=1 Valid values for this parameter are 1 for BOOT0 and 2 for BOOT1. Please never use partition number 0 here! - The eMMC has 2 boot partitions (BOOT0 and BOOT1) and a user data partition (DATA). - The boot partitions are numbered as partition 1 and 2 in MMC driver. - Number 0 is used for user data partition and should not be utilized for storing - boot images and U-Boot environment in RAW mode since it will break file system - structures usually located here. - The default boot partition is BOOT0. It is selected by the following parameter: - CONFIG_SYS_MMC_ENV_PART=1 - Valid values for this parameter are 1 for BOOT0 and 2 for BOOT1. - Please never use partition number 0 here! - The partition number is ignored if the target device is SD card. - The boot image offset starts at block 0 for eMMC and block 1 for SD devices. The block 0 on SD devices is left for MBR storage.