From: Haiying Wang Date: Tue, 19 Jun 2007 18:18:34 +0000 (-0400) Subject: Add PCI support for MPC8568MDS board X-Git-Tag: v1.3.0-rc1~19^2~22^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c59e4091ffe0148398b9e9ff14a019ea038b7432;p=u-boot Add PCI support for MPC8568MDS board This patch is against u-boot-mpc85xx.git of www.denx.com Signed-off-by: Haiying Wang Signed-off-by: Ebony Zhu --- diff --git a/board/mpc8568mds/init.S b/board/mpc8568mds/init.S index 0d879821e3..972a7d4299 100644 --- a/board/mpc8568mds/init.S +++ b/board/mpc8568mds/init.S @@ -143,54 +143,42 @@ tlb1_entry: .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 2: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM + * TLBe 2: 1G Non-cacheable, guarded + * 0x80000000 512M PCI1 MEM + * 0xa0000000 512M PCIe MEM */ .long TLB1_MAS0(1, 2, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) + .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 3: 256M Non-cacheable, guarded - * 0xa0000000 256M PCIe Mem - */ - .long TLB1_MAS0(1, 3, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PEX_MEM_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PEX_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLBe 4: Reserved for future usage - */ - - /* - * TLBe 5: 64M Non-cacheable, guarded + * TLBe 3: 64M Non-cacheable, guarded * 0xe000_0000 1M CCSRBAR * 0xe200_0000 8M PCI1 IO * 0xe280_0000 8M PCIe IO */ - .long TLB1_MAS0(1, 5, 0) + .long TLB1_MAS0(1, 3, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 6: 64M Cacheable, non-guarded + * TLBe 4: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - .long TLB1_MAS0(1, 6, 0) + .long TLB1_MAS0(1, 4, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 7: 256K Non-cacheable, guarded + * TLBe 5: 256K Non-cacheable, guarded * 0xf8000000 32K BCSR * 0xf8008000 32K PIB (CS4) * 0xf8010000 32K PIB (CS5) */ - .long TLB1_MAS0(1, 7, 0) + .long TLB1_MAS0(1, 5, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K) .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR_BASE), 0,0,0,0,1,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR_BASE), 0,0,0,0,0,1,0,1,0,1) @@ -202,12 +190,12 @@ tlb1_entry: * LAW(Local Access Window) configuration: * *0) 0x0000_0000 0x7fff_ffff DDR 2G - *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 256MB - *2) 0xa000_0000 0xbfff_ffff PCIe MEM 256MB - *5) 0xc000_0000 0xdfff_ffff SRIO 256MB + *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB + *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB *-) 0xe000_0000 0xe00f_ffff CCSR 1M *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M - *4) 0xe280_0000 0xe2ff_ffff PCIe I/0 8M + *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M + *5) 0xc000_0000 0xdfff_ffff SRIO 512MB *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB @@ -226,20 +214,20 @@ tlb1_entry: #define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) #define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) #define LAWBAR2 ((CFG_PEX_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M)) #define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) #define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M)) #define LAWBAR4 ((CFG_PEX_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_16M)) +#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_8M)) #define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) /* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */ #define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c index 9c7960d47e..23caaec72f 100644 --- a/board/mpc8568mds/mpc8568mds.c +++ b/board/mpc8568mds/mpc8568mds.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "bcsr.h" @@ -50,6 +51,15 @@ int board_early_init_f (void) enable_8568mds_duart(); enable_8568mds_flash_write(); +#ifdef CFG_I2C2_OFFSET + /* Enable I2C2_SCL and I2C2_SDA */ + volatile struct par_io *port_c; + port_c = (struct par_io*)(CFG_IMMR + 0xe0140); + port_c->cpdir2 |= 0x0f000000; + port_c->cppar2 &= ~0x0f000000; + port_c->cppar2 |= 0x0a000000; +#endif + return 0; } @@ -269,20 +279,62 @@ static struct pci_config_table pci_mpc8568mds_config_table[] = { #endif static struct pci_controller hose[] = { + { #ifndef CONFIG_PCI_PNP - { config_table: pci_mpc8568mds_config_table,}, -#endif -#ifdef CONFIG_MPC85XX_PCI2 - {}, + config_table: pci_mpc8568mds_config_table, #endif + } }; #endif /* CONFIG_PCI */ +/* + * pib_init() -- Initialize the PCA9555 IO expander on the PIB board + */ +void +pib_init(void) +{ + u8 val8, orig_i2c_bus; + /* + * Assign PIB PMC2/3 to PCI bus + */ + + /*switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0x00; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0x00; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); + val8 = 0xf9; + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0x00; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + asm("eieio"); +} + void pci_init_board(void) { #ifdef CONFIG_PCI + pib_init(); pci_mpc85xx_init(&hose); #endif } diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 77f885daa6..3d4816f3a9 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1522,6 +1522,17 @@ typedef struct ccsr_rio { char res58[60176]; } ccsr_rio_t; +/* Quick Engine Block Pin Muxing Registers (0xe_0100 - 0xe_01bf) */ +typedef struct par_io { + uint cpodr; /* 0x100 */ + uint cpdat; /* 0x104 */ + uint cpdir1; /* 0x108 */ + uint cpdir2; /* 0x10c */ + uint cppar1; /* 0x110 */ + uint cppar2; /* 0x114 */ + char res[8]; +}par_io_t; + /* * Global Utilities Register Block(0xe_0000-0xf_ffff) */ @@ -1585,7 +1596,13 @@ typedef struct ccsr_gur { uint svr; /* 0xe00a4 - System version register */ char res10a[8]; uint rstcr; /* 0xe00b0 - Reset control register */ +#ifdef MPC8568 + char res10b[76]; + par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */ + char res10c[3136]; +#else char res10b[3404]; +#endif uint clkocr; /* 0xe0e00 - Clock out select register */ char res11[12]; uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index eef168c252..5bc953adc4 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -33,7 +33,7 @@ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ -#undef CONFIG_PCI +#define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ @@ -306,11 +306,14 @@ extern unsigned long get_clock_freq(void); #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR 0x52 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0,0x69} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 /* * General PCI @@ -318,7 +321,7 @@ extern unsigned long get_clock_freq(void); */ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 #define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */